Related
Hi XDA,
I've searched in many threads but i can't find an anwser.
I've bricked my Galaxy Gio when i flashed a custom kernel. It was the kernel in this thread http://forum.xda-developers.com/showthread.php?t=1319816
Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
I have android 2.3.3 Gingerbread.
Is there any way to unbrick or is my phone just an expensive decoration now.
Thanks in Advance.
Hi !!!
same new here
This ll work in some cases
Hope this will work in your device as well
Pull the battery to kill the boot loop (or whatever is hosed up), put the phone into downloading mode and re-flash the stock ROM.
Free to try...
Thanks for quick reply but i can't go into download mode as i said. Also my phone is just totally off and won't boot at all. My pc also doesn't detect it when it is plugged in.
SuperUub said:
Thanks for quick reply but i can't go into download mode as i said. Also my phone is just totally off and won't boot at all. My pc also doesn't detect it when it is plugged in.
Click to expand...
Click to collapse
If not even adb detects it, i'm pretty sure you're buggered, mate.
did you try and leave the battery out for some 10 min or more?
If adb does not detect the phone after that, then it seems to be a brick for real.
Is your phone stop at the "samsung" when you turn on your phone?
If is this,it's very easy to unbrick
One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado
+
Yes this way usually works. I've tested this way.
that worked for me to on a brick when it didnt even went on, no recovery, download mode etc, after waiting 2 weeks and trying to repair it myself I nearly throw it away, and then suddenly it went into download mode for about 1 or 2 seconds, wich told me the battery whasn't working.. so I started to charge the battery, and hoped it would boot, but it didn't.. using that method given above, I could get into download mode again, and flashes a new stock ROM. now I still have my phone, working.
Odin to detect
Darkshado said:
One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado
Click to expand...
Click to collapse
i i need help, odin detects my phone but dont pass from -"setup connection", did you have news?
I had my mainboard replaced at a service center... Probably not the news you would have liked, but I'm afraid that's your next step as well.
Darkshado said:
One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado
Click to expand...
Click to collapse
This worked for me too, try to charge your battery in another phone if possible
bobcota said:
i i need help, odin detects my phone but dont pass from -"setup connection", did you have news?
Click to expand...
Click to collapse
same problem
same problem here
voetbalremco said:
that worked for me to on a brick when it didnt even went on, no recovery, download mode etc, after waiting 2 weeks and trying to repair it myself I nearly throw it away, and then suddenly it went into download mode for about 1 or 2 seconds, wich told me the battery whasn't working.. so I started to charge the battery, and hoped it would boot, but it didn't.. using that method given above, I could get into download mode again, and flashes a new stock ROM. now I still have my phone, working.
Click to expand...
Click to collapse
i also have the same prblem here just now , i tried to flash this ROM but i forgot to wipe data/factory reset the phne and i unintentionally flashed the rom without wiping it :'( and now, dont boot at all but can still turned on and ended up just "samsung" appearing on the screen . please help :crying::crying:
I've bricked my Galaxy Gio when i flashed a custom kernel.
Hi There I also have the same problem. I installed Galaxy Ace's Kernel onto my Galaxi Gio, Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
S[B said:
[/B]uperUub;20668671]Hi XDA!
I've searched in many threads but i can't find an anwser.
I've bricked my Galaxy Gio when i flashed a custom kernel. It was the kernel in this thread http://forum.xda-developers.com/showthread.php?t=1319816
Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
I have android 2.3.3 Gingerbread.
Is there any way to unbrick or is my phone just an expensive decoration now.
Thanks in Advance.
Click to expand...
Click to collapse
Not either going to Download Mode
trackIDtracker said:
Hi !!!
same new here
This ll work in some cases
Hope this will work in your device as well
Pull the battery to kill the boot loop (or whatever is hosed up), put the phone into downloading mode and re-flash the stock ROM.
Free to try...
Click to expand...
Click to collapse
Hey... i searched for a solution and couldn't find one....
So i tried to install the Omega rom, the process went by pretty quickly, that's when i became suspicious.
Now i can turn my phone on, but there is something... strange... for instance once the screen turns off, the phone plays dead until i restart it.
i can get into download mode, and i did, tried to install cwm6 again, but it didnt work.
and if i try to go into recovery mode (vol up home and power) it just hangs on the "Samsung galaxy note 2 n-7100" screen.
Thanks for the help in advance =]
edit: Forgot to mention, if i plug it into the pc, windows/kies doesn't recognise it.
:< Please help me i am completly lost and beating my self up for trying this foolishness
Did u check "usb debug" on your device? Try samsung driver instead.
Try reflash recovery via pc odin again.
Might wanna try TWRP as people have been having issues with CWM when flashing ROM's.
Hey thanks for the answers, i indeed check usb debugging and it is on.
i also relized i SOMEHOW managed to download the galaxy s3 rom instead of the note 2 rom and flash it, and i guess thats the problem, however im sure it didnt flash right, any way i downloaded the correct rom and flashed it using mobile odin, every thing worked fine
however i still cant get into recovery mod, and the problem where the device stays in sleep mode is still there...
Im going to try this TWRP thingy now
Moldat said:
Hey thanks for the answers, i indeed check usb debugging and it is on.
i also relized i SOMEHOW managed to download the galaxy s3 rom instead of the note 2 rom and flash it, and i guess thats the problem, however im sure it didnt flash right, any way i downloaded the correct rom and flashed it using mobile odin, every thing worked fine
however i still cant get into recovery mod, and the problem where the device stays in sleep mode is still there...
Im going to try this TWRP thingy now
Click to expand...
Click to collapse
By the way, as noted by Adam Outler, you should not use ODIN to continuously flash ROM's. Just to reset phone if needed. Using ODIN to flash ROM's will only turn out badly.
CBConsultation said:
By the way, as noted by Adam Outler, you should not use ODIN to continuously flash ROM's. Just to reset phone if needed. Using ODIN to flash ROM's will only turn out badly.
Click to expand...
Click to collapse
i see... well currently what i want to do is reset every thing i did, but i cant because the phone wont connect to the usb.
Moldat said:
i see... well currently what i want to do is reset every thing i did, but i cant because the phone wont connect to the usb.
Click to expand...
Click to collapse
Are you using a USB 2.0 or 3.0 port? use 20. if you're not already.
CBConsultation said:
Are you using a USB 2.0 or 3.0 port? use 20. if you're not already.
Click to expand...
Click to collapse
im using 2.0, i tried every usb port on my pc just in case....
The thing is it used to work earlier, before ive gone and messed it all up
Sorry you're not having much luck. Maybe one of the brilliant devs will hop in and lend some thoughts. I'm out of ideas at the moment.
Thanks any way dude, appreciate it.
Im going to sleep, but let me reiterate the problem.
- Tried to flash a Galaxy s3 rom onto the Note 2, dont ask me how i made this mistake
- something.. happened during the flash
- now the phone wouldn't connect to usb (so i cant use odin) and after the screen turns off it wont turn back on again without switching the device off and on
- eventually downloaded the note 2 rom (omega) and flashed it using mobile odin, this time the proccess finished fine, but...
-Still cant connect the phone to the pc usb, (it charges tho, drivers are installed)
-Screen still wont come back on after it turns off
Shameless bump =[
Man.......
im guessing this problem is not a common one eh?
I hate to spam but im really lost, having this 600$ mirrior feels bad :<
Have you tried flashing a stock rom with odin mobile? I've not used odin mobile so I have no idea what it can and can't do. But you could try flashing a stock rom and then put Cwm or twrp after you have checked it
Sent from my GT-N7100 using xda premium
Hi I have a samsung galaxt s3 sgh-t999, I rooted my phone with no problems and wanted to be able to move apps to sd card so I went to rom manager and clicked on partition sd card and it said it was going to reboot it shut off and now it wont turn back on, wont go into recovery mode, if i plug it into the computer, the computer dont pick it up, when i plug in the charger it does nothing... I really need help, is there away to fix it or do I have a $500 door stop or paper weight??? all help appreciated
I too Have a T999L that is hard bricked. No issues rooting. used swapper 2 and link2sd and got hard bricked. I am running du_d2tmo-2013-10-14 rom 4.3 JB. I attempted the debrick method using both nix and winblows.. no results whatsoever . not a single error. in fact, i cannot get my T999L to do anything at all. i plug it into the pc and IF the battery is out, the red light comes on. with the battery in, it does nothing at all. ANY help would be greatly appreciated
shawzaw said:
Hi I have a samsung galaxt s3 sgh-t999, I rooted my phone with no problems and wanted to be able to move apps to sd card so I went to rom manager and clicked on partition sd card and it said it was going to reboot it shut off and now it wont turn back on, wont go into recovery mode, if i plug it into the computer, the computer dont pick it up, when i plug in the charger it does nothing... I really need help, is there away to fix it or do I have a $500 door stop or paper weight??? all help appreciated
Click to expand...
Click to collapse
Can you get into download mode? Does it show up on Odin? If it does then flash a root66 img root66_TMO_T999UVUEMJC for my Tmobile T999 This is what I used when I thought my phone was bricked. I used Odin to flash TWRP recovery and then format, and flash a custom rom. Good luck
shawzaw said:
Hi I have a samsung galaxt s3 sgh-t999, I rooted my phone with no problems and wanted to be able to move apps to sd card so I went to rom manager and clicked on partition sd card and it said it was going to reboot it shut off and now it wont turn back on, wont go into recovery mode, if i plug it into the computer, the computer dont pick it up, when i plug in the charger it does nothing... I really need help, is there away to fix it or do I have a $500 door stop or paper weight??? all help appreciated
Click to expand...
Click to collapse
Rom Manager most likely partitioned your INTERNAL SD Card instead. You'd have to Flash Root66 for Android 4.2 via Odin.
BlazeUser said:
I too Have a T999L that is hard bricked. No issues rooting. used swapper 2 and link2sd and got hard bricked. I am running du_d2tmo-2013-10-14 rom 4.3 JB. I attempted the debrick method using both nix and winblows.. no results whatsoever . not a single error. in fact, i cannot get my T999L to do anything at all. i plug it into the pc and IF the battery is out, the red light comes on. with the battery in, it does nothing at all. ANY help would be greatly appreciated
Click to expand...
Click to collapse
Did you try the De-Bricking Thread in Development sub forum ?
Perseus71 said:
Rom Manager most likely partitioned your INTERNAL SD Card instead. You'd have to Flash Root66 for Android 4.2 via Odin.
Did you try the De-Bricking Thread in Development sub forum ?
Click to expand...
Click to collapse
yes i tried this method on both windows and ubuntu 12.04 http://forum.xda-developers.com/showthread.php?t=2439367
BlazeUser said:
yes i tried this method on both windows and ubuntu 12.04 http://forum.xda-developers.com/showthread.php?t=2439367
Click to expand...
Click to collapse
What image did you use ?
Perseus71 said:
What image did you use ?
Click to expand...
Click to collapse
i used the T999L image
Hey can someone help me where to find a tutorial to root my T999v, I only see tutorials for T999 and T999L can i use those same tutorial to root my phone on version 4.1.2 please i just don't wanna brick my phone so someone help me
BlazeUser said:
i used the T999L image
Click to expand...
Click to collapse
Please use 4.3 image for T999
dorian2kx said:
Hey can someone help me where to find a tutorial to root my T999v, I only see tutorials for T999 and T999L can i use those same tutorial to root my phone on version 4.1.2 please i just don't wanna brick my phone so someone help me
Click to expand...
Click to collapse
Yes.
acedik said:
Can you get into download mode? Does it show up on Odin? If it does then flash a root66 img root66_TMO_T999UVUEMJC for my Tmobile T999 This is what I used when I thought my phone was bricked. I used Odin to flash TWRP recovery and then format, and flash a custom rom. Good luck
Click to expand...
Click to collapse
no i cant get into download mode or recovery mode, it loads nothing up, wont vibrate or anything, its hard bricked, i dont know what version of odin i need for my phone, it from tmobile samsung galaxy s3 sgh-t999
shawzaw said:
no i cant get into download mode or recovery mode, it loads nothing up, wont vibrate or anything, its hard bricked, i dont know what version of odin i need for my phone, it from tmobile samsung galaxy s3 sgh-t999
Click to expand...
Click to collapse
Wow, so its still bricked from December? Did you recently try the debrick method in dev section?
Sent from my SGH-T999 using Tapatalk
bricked
ive got a similar problem. tried this method http://forum.xda-developers.com/showthread.php?t=2439367 but it still will not do anything, no power, no reaction, just black screen. its tmobile sgh-t99l. really really need help if anyone can
syben7 said:
ive got a similar problem. tried this method http://forum.xda-developers.com/showthread.php?t=2439367 but it still will not do anything, no power, no reaction, just black screen. its tmobile sgh-t99l. really really need help if anyone can
Click to expand...
Click to collapse
You may need a debrick.img created from a device with the NC1 firmware. Do you know what build you were on before it bricked?
We dont have that NC1 image yet, that im aware of, but ill see if I cant find someone to make one.
Sent from my SGH-T999 using Tapatalk
syben7 said:
ive got a similar problem. tried this method http://forum.xda-developers.com/showthread.php?t=2439367 but it still will not do anything, no power, no reaction, just black screen. its tmobile sgh-t99l. really really need help if anyone can
Click to expand...
Click to collapse
Sent you a pm with a new debrick.img to try. Please reply via pm to let me know how it goes. Good luck!
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
You may need a debrick.img created from a device with the NC1 firmware. Do you know what build you were on before it bricked?
We dont have that NC1 image yet, that im aware of, but ill see if I cant find someone to make one.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
I was on the pac 4.4 nightly, had flashed new nightly updates regularly for nearly a month with no problems, but then decided to switch to cm11, when I tried to flash that it gave me the bootloader error, so I went to the method that was a supposed fix for that and flashed it and thats when it went dead.
Same Problem
Hey guys I have the same exact problem heres how it started, which I think accurately describes everyone else with the same problem:
1) I downloaded the correct TWRP for my phone and unlocked it previously with ODIN.
2) So far everything is fine, now I find a nice new ROM which is stable and try to flash it. The rom was: FlashingDroid_S5_v2.2
3)First I deleted cache and dalvic cache as well, basically the default wipe.
4) I flashed the ROM and it said it was succesful, I click reboot, and nothing
Symptoms
1)No vibration
2)No screen image whatsoever
3)No signs of booting up with computer
4) Does not boot up using JIG method
5)Computer does not see phone
Notes
1) I tried checking the pulse of the phone W/out battery and gave me very little wattage, and eventually it drained out
2) Then I tried plugging it into my computer and the front red light went on but no power in phone and PC cannot see it
3) Sometimes when I put the battery in, it gives me a quick flash, from the flashlight on the back, OR it gives a millisecond of a vibration
4)Before I flashed I had android 4.3 Jellybean stock with root-again I tried to flash FlashingDroid_S5_v2.2 w/TWRP
Trials to resolve in which did NOT work
1) I tried putting it into download mode, with JIG but no battery and had someone put the battery in WHILE i was pressing HOME+POWER+VOLUME DOWN with the JIG
Results: It sometimes gave me a small vibration, but no results
2) Tried to install correct ODIN and KIES software
Result: Gave me negative sound on laptop meaning it does not recognize device-it does not show up in My Computer either
Having the same issue.
I used the FlashingDroid_S5_v2.2 rom. Wiped the phone before flashing, the prompt said successful and rebooted.
Then nothing.
No response from charging, power, download mode... nothing.
Hi guys.
One of my friends recently gave me his bricked galaxy s4 mini. The phone doesn't turn on and when I plug it in to my laptop it comes up as Qualcomm, Inc. Gobi Wireless Modem (QDL mode) . I've tried to fix it using qdload.pl and QPST but none of them worked.
Is there any way to restore the device without jtaging it ?? I have another working gs4 mini if that helps.
Download odin and a firmware from sammobile. Then do the steps showing on the website and done.
Han5ixix1 said:
Download odin and a firmware from sammobile. Then do the steps showing on the website and done.
Click to expand...
Click to collapse
it doesn't go in to download mode, it's a hard brick
http://forum.xda-developers.com/showthread.php?t=2625628
http://forum.xda-developers.com/galaxy-s4-mini/help/debrick-image-galasxy-s4-mini-t3014728
Try this
Btw: How did he manage to brick his device?
s4 mini flashed wrong twrp
I flashed wrong twrp and phone got bricked . I connect it to pc and it recognise then disconnects
I can't flash my S4 mini, Odin blocks on this screen http€://i64.tinypic.com/m7b76f.jpg (remove the "€")
ab de said:
I flashed wrong twrp and phone got bricked . I connect it to pc and it recognise then disconnects
Click to expand...
Click to collapse
have you been able to fix your phone. got a similar case over here.. help
Eskay_Sedem said:
have you been able to fix your phone. got a similar case over here.. help
Click to expand...
Click to collapse
The same thing just happened to my working S4 mini. I put it on charge yesterday and it switched off after 5 minutes and never switched back on. I don't think there's any way to fix it as the EMMC is most likely dead :crying:
Patrick4 said:
The same thing just happened to my working S4 mini. I put it on charge yesterday and it switched off after 5 minutes and never switched back on. I don't think there's any way to fix it as the EMMC is most likely dead :crying:
Click to expand...
Click to collapse
Brickbug much?
=/
Same thing happenned to me. I installed TWRP and the phone just died. Now it turns on and everything but is stuck in bootloop. Main issue is, my recovery just shows TWRP symbol and no options to be able to flash a new rom or a new recovery.
Odin flashes stuff such as cwm, stock rom, but none of these seem to actually have any impact in my phone behaviour.
I think it's just dead yet I just don't want to accept it, I'm trying everything I can to make it work again.
PS: I hate myself the day I decided to install a trwp
please help me!! clearly i am more of a noob than I thought I was!
I rooted my phone using Odin a few months ago. Then it just crapped out on me. Now it is stuck in a boot loop mode. I can get it to recovery mood and download mode. I have tried wiping the cache partition and done the factory rest. That isn't the issue. The issue is that when I have Odin open the phone isn't being recognized. it keeps saying "USB device not recognized. the last USB device you connected to this computer malfunctioned, and Windows does not recognize it". I have tried reinstalling the drivers for my Sprint S6. I have also updated the media package for my windows 8.1. But it still isn't recognizing the phone. I also tried un instaling and reinstalling. I have smart switch but still nothing. I am not entirely sure how to fix this. Please Help!! Also, in the top left hand corner where it says "kernal is not seandriod enforcing. custom binary blocked by frp lock"
I've exhausted everything best to my knowledge. I appreciate all the help I can get from you experts. Thank all in advance from this tech noob!
Gladi80rPrincess09 said:
please help me!! clearly i am more of a noob than I thought I was!
...
I've exhausted everything best to my knowledge. I appreciate all the help I can get from you experts. Thank all in advance from this tech noob!
Click to expand...
Click to collapse
Geez... that sucks, and disappointing no one has replied yet.
I hate to reply with a few of the obvious tricks- but it has happened multiple times to me that my phone won't be recognized by ODIN (or anything other than as "charging"). Usually this is solved by switching to other USB ports, and plugging-unplugging a few times, but when that fails (which it does not infrequently)- I have gotten lucky by not just restarting my computer, but actually turning it off, waiting a moment and turning it back on.
Magically sometimes that does it.
Hope that works for you, and that others more senior weigh in on this :good:
I second what spammy said.
I just spent 6 hours fixing my Sprint s6. I got it domestic unlocked and somehow near-bricked it, and then got the dreaded usb not recognized message. Shutting my laptop all the way down and letting it sit a few minutes did the trick and I was able to use Odin afterwards.
update!!
so, i got it to connect by just lifting the tongue a little. It connected to Odin. I tried to flash it using the TAR file but it keeps saying failed. Can anyone tell me why it says "custom binary blocked by frp lock" and how to fix that ? I know I have to connect it to samsung online or something but the phone is stuck in boot loop mode so I cant really do much. Like I said before I tried to flash with the 5.0.2 TAR file and ended up with the following message at the top left and corner in red and black highlight "SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1" what does this mean? is there a fix? and how do I fix it? my phone is already factory rest and I lost everything so I am not concerned about that as long as I can get it to turn back on. Please help me.
update
chatovishious said:
I second what spammy said.
I just spent 6 hours fixing my Sprint s6. I got it domestic unlocked and somehow near-bricked it, and then got the dreaded usb not recognized message. Shutting my laptop all the way down and letting it sit a few minutes did the trick and I was able to use Odin afterwards.
Click to expand...
Click to collapse
spammy l said:
Geez... that sucks, and disappointing no one has replied yet.
I hate to reply with a few of the obvious tricks- but it has happened multiple times to me that my phone won't be recognized by ODIN (or anything other than as "charging"). Usually this is solved by switching to other USB ports, and plugging-unplugging a few times, but when that fails (which it does not infrequently)- I have gotten lucky by not just restarting my computer, but actually turning it off, waiting a moment and turning it back on.
Magically sometimes that does it.
Hope that works for you, and that others more senior weigh in on this :good:
Click to expand...
Click to collapse
so, i got it to connect by just lifting the tongue a little. It connected to Odin. I tried to flash it using the TAR file but it keeps saying failed. Can anyone tell me why it says "custom binary blocked by frp lock" and how to fix that ? I know I have to connect it to samsung online or something but the phone is stuck in boot loop mode so I cant really do much. Like I said before I tried to flash with the 5.0.2 TAR file and ended up with the following message at the top left and corner in red and black highlight "SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1" what does this mean? is there a fix? and how do I fix it? my phone is already factory rest and I lost everything so I am not concerned about that as long as I can get it to turn back on. Please help me.
Gladi80rPrincess09 said:
so, i got it to connect by just lifting the tongue a little. It connected to Odin. I tried to flash it using the TAR file but it keeps saying failed. Can anyone tell me why it says "custom binary blocked by frp lock" and how to fix that ? I know I have to connect it to samsung online or something but the phone is stuck in boot loop mode so I cant really do much. Like I said before I tried to flash with the 5.0.2 TAR file and ended up with the following message at the top left and corner in red and black highlight "SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1" what does this mean? is there a fix? and how do I fix it? my phone is already factory rest and I lost everything so I am not concerned about that as long as I can get it to turn back on. Please help me.
Click to expand...
Click to collapse
Where you previously on 5.1.1? If so I hear downgrading causes problems. Download a more recent tar.
Mine is 5.1.1 OL1 modem.
I'm betting that is your problem.
help me!
chatovishious said:
Where you previously on 5.1.1? If so I hear downgrading causes problems. Download a more recent tar.
Mine is 5.1.1 OL1 modem.
I'm betting that is your problem.
Click to expand...
Click to collapse
i can't remember if my phone is upgraded or not. i did it with 5.0.2 and ive been on the search for the 5.1.1 file. where can I find it?
Gladi80rPrincess09 said:
i can't remember if my phone is upgraded or not. i did it with 5.0.2 and ive been on the search for the 5.1.1 file. where can I find it?
Click to expand...
Click to collapse
Sounds like your USB is a bit out of wack. You need to make sure that the PC you are using is finding the device properly, loading the drivers, and allowing you to access the internal storage. Just go to "My Computer" on your PC and your device should show up and allow you to access it. Otherwise trying to use Odin will be a waste of your time.
Once you have that Odin should find it no problem. However, if your microUSB on the device is acting intermittent and you start flashing in Odin and it disconnects for a sec there will be issues. You don't want an interrupt during the flash.
If you can do all this go to this link and download Odin 3.10.6 and the OJ7 tar file: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448
Don't use previous version of Odin as they are confirmed to have issues flashing some tar files on the S6. If it doesn't work try doing another factory reset through stock recovery and try again.
Report back your findings to continue troubleshooting if needed.
Thank you! progress/update
CCallahan said:
Sounds like your USB is a bit out of wack. You need to make sure that the PC you are using is finding the device properly, loading the drivers, and allowing you to access the internal storage. Just go to "My Computer" on your PC and your device should show up and allow you to access it. Otherwise trying to use Odin will be a waste of your time.
Once you have that Odin should find it no problem. However, if your microUSB on the device is acting intermittent and you start flashing in Odin and it disconnects for a sec there will be issues. You don't want an interrupt during the flash.
If you can do all this go to this link and download Odin 3.10.6 and the OJ7 tar file: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448
Don't use previous version of Odin as they are confirmed to have issues flashing some tar files on the S6. If it doesn't work try doing another factory reset through stock recovery and try again.
Report back your findings to continue troubleshooting if needed.
Click to expand...
Click to collapse
so, i downloaded the 5.1.1 Tar file progress is that I am going to flash it. I have been using the most updated version of Odin (3.10.7) could that be causing the issue? the phone stays connected while its flashing in Odin. Once it is connected I dont mess with it? Also, please answer me if I am able to fix this issue and will i be able to get my phone booted?
Gladi80rPrincess09 said:
so, i downloaded the 5.1.1 Tar file progress is that I am going to flash it. I have been using the most updated version of Odin (3.10.7) could that be causing the issue? the phone stays connected while its flashing in Odin. Once it is connected I dont mess with it? Also, please answer me if I am able to fix this issue and will i be able to get my phone booted?
Click to expand...
Click to collapse
I have not used the 3.10.7 version yet but should not be a problem.
Download the tar file, connect the device and make sure Odin shows the device as connected/ready, hit the AP button and select your tar file, then flash and let finish. Then it will reboot automatically and boot up normally.
Try this and post your findings.
question
CCallahan said:
Sounds like your USB is a bit out of wack. You need to make sure that the PC you are using is finding the device properly, loading the drivers, and allowing you to access the internal storage. Just go to "My Computer" on your PC and your device should show up and allow you to access it. Otherwise trying to use Odin will be a waste of your time.
Once you have that Odin should find it no problem. However, if your microUSB on the device is acting intermittent and you start flashing in Odin and it disconnects for a sec there will be issues. You don't want an interrupt during the flash.
If you can do all this go to this link and download Odin 3.10.6 and the OJ7 tar file: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448
Don't use previous version of Odin as they are confirmed to have issues flashing some tar files on the S6. If it doesn't work try doing another factory reset through stock recovery and try again.
Report back your findings to continue troubleshooting if needed.
Click to expand...
Click to collapse
CCallahan said:
I have not used the 3.10.7 version yet but should not be a problem.
Download the tar file, connect the device and make sure Odin shows the device as connected/ready, hit the AP button and select your tar file, then flash and let finish. Then it will reboot automatically and boot up normally.
Try this and post your findings.
Click to expand...
Click to collapse
i knocked the phone off the computer desk and it disconnected from Odin while it was in progress and it said failed. The phone was in download mode and now it is stuck on a blue screen that has white triangle with exclamation point. it reads "an error has occurred while updating the device software. use the emrgency recovery function in the smart swtch pc software" what did I do?
Gladi80rPrincess09 said:
i knocked the phone off the computer desk and it disconnected from Odin while it was in progress and it said failed. The phone was in download mode and now it is stuck on a blue screen that has white triangle with exclamation point. it reads "an error has occurred while updating the device software. use the emrgency recovery function in the smart swtch pc software" what did I do?
Click to expand...
Click to collapse
Can you get the device back in download mode?
update!!
CCallahan said:
Can you get the device back in download mode?
Sent from my SM-G920P using Tapatalk
---------- Post added at 10:59 AM ---------- Previous post was at 10:54 AM ----------
Can you get the device back in download mode?
Sent from my SM-G920P using Tapatalk
Click to expand...
Click to collapse
yes, i got it back to download mode. i tried to reflash it with Odin and now it says failed. i can't turn it on or off. if i try to boot it off then it goes to that blue screen again i tried to do the smart switch thing but it doesnt recognize my device
Gladi80rPrincess09 said:
yes, i got it back to download mode. i tried to reflash it with Odin and now it says failed. i can't turn it on or off. if i try to boot it off then it goes to that blue screen again i tried to do the smart switch thing but it doesnt recognize my device
Click to expand...
Click to collapse
Dont worry about that. That's what happened to me, but that screen functions the same as Download mode. you can still flash tar files from there.
Here was the link to the tar files I used.
http://www.droidviews.com/install-latest-ol1-stock-firmware-on-sprint-galaxy-s6-and-s6-edge/
thank you for the help!!
chatovishious said:
Dont worry about that. That's what happened to me, but that screen functions the same as Download mode. you can still flash tar files from there.
Here was the link to the tar files I used.
http://www.droidviews.com/install-latest-ol1-stock-firmware-on-sprint-galaxy-s6-and-s6-edge/
Click to expand...
Click to collapse
i got it to work!!!
Gladi80rPrincess09 said:
please help me!! clearly i am more of a noob than I thought I was!
I rooted my phone using Odin a few months ago. Then it just crapped out on me. Now it is stuck in a boot loop mode. I can get it to recovery mood and download mode. I have tried wiping the cache partition and done the factory rest. That isn't the issue. The issue is that when I have Odin open the phone isn't being recognized. it keeps saying "USB device not recognized. the last USB device you connected to this computer malfunctioned, and Windows does not recognize it". I have tried reinstalling the drivers for my Sprint S6. I have also updated the media package for my windows 8.1. But it still isn't recognizing the phone. I also tried un instaling and reinstalling. I have smart switch but still nothing. I am not entirely sure how to fix this. Please Help!! Also, in the top left hand corner where it says "kernal is not seandriod enforcing. custom binary blocked by frp lock"
I've exhausted everything best to my knowledge. I appreciate all the help I can get from you experts. Thank all in advance from this tech noob!
Click to expand...
Click to collapse
Hey! Still stuck?
Poebat said:
Hey! Still stuck?
Click to expand...
Click to collapse
No according to the post above yours.
koop1955 said:
No according to the post above yours.
Click to expand...
Click to collapse
K. Sometimes something appears to work and then fails :/ happens sometimes
Thank you all for the kelp! i finally got it to work. Never again will I root my phone. Now, the only sad thing about it is that I lost all my treasured memories ( pictures and videos)
Gladi80rPrincess09 said:
Thank you all for the kelp! i finally got it to work. Never again will I root my phone. Now, the only sad thing about it is that I lost all my treasured memories ( pictures and videos)
Click to expand...
Click to collapse
nothing wrong with rooting if you know what you're doing. ?
Sent from my SM-G900P using Tapatalk