Develop Bugs

Urgent Help needed, USB not being recognized!

I'm looked everywhere but nothing. Please help if you can.
I was on BeastMOD2.5 then some things on the phone were not working (Tmobile S2) so I called in and they shipped me a replacement. I used this link (http://forum.xda-developers.com/showthread.php?t=1323878) to restore it back to stock and unroot the phone and it worked besides one problem, I still got the synergy kernel gray screen at bootup, so as of now, i'm at stock, unrooted just with that synergy kernel screen. I looked it up and found the ODIN stock way to get it back so I tried that way, but now everytime I hook the USB to my computer to try to ODIN it, it always says USB not recognized (I've tried searching for fixes: clean USB, reinstall drivers, reinstall Klies, other computers, other USB cord, other USB ports but nothing).
I just need to get that synergy kernel screen off from bootup, but now that I cannot hook up the phone to any computer, what should I do? Is there a wireless option I have? Is there a way to brick the phone to where it won't even boot up when tmobile gets it back that they wouldn't even know? thing is it will also charge using a computer, but the computer won't recognize it (im done the whole settings USB options as well)
Please help, thanks guys.

any ideas?

le14 said:
I'm looked everywhere but nothing. Please help if you can.
I was on BeastMOD2.5 then some things on the phone were not working (Tmobile S2) so I called in and they shipped me a replacement. I used this link (http://forum.xda-developers.com/showthread.php?t=1323878) to restore it back to stock and unroot the phone and it worked besides one problem, I still got the synergy kernel gray screen at bootup, so as of now, i'm at stock, unrooted just with that synergy kernel screen. I looked it up and found the ODIN stock way to get it back so I tried that way, but now everytime I hook the USB to my computer to try to ODIN it, it always says USB not recognized (I've tried searching for fixes: clean USB, reinstall drivers, reinstall Klies, other computers, other USB cord, other USB ports but nothing).
I just need to get that synergy kernel screen off from bootup, but now that I cannot hook up the phone to any computer, what should I do? Is there a wireless option I have? Is there a way to brick the phone to where it won't even boot up when tmobile gets it back that they wouldn't even know? thing is it will also charge using a computer, but the computer won't recognize it (im done the whole settings USB options as well)
Please help, thanks guys.
Click to expand...
Click to collapse
does it recognize it in adb if usb debugging is enabled?

Did you try pulling the battery for 30 seconds?
Sent from my SGH-T989 using XDA App

reboot the PC / laptop
unplug all other USB devices

AllGamer said:
reboot the PC / laptop
unplug all other USB devices
Click to expand...
Click to collapse
I've tried that and i've tried this on 4 PC's and my usual Mac that I use to transfer files but no luck.
I also tried the debugging mode but nothing as well. Ill try for a couple more days with random things but since the rom is stock and everything is basically like out the box status if I were to return it with the synergy kernel screen on bootup, what would tmobile say even though everything is stock even the kernel?

Hey Buddy, there had been a few of us that has had the same problem.
For some reason, after you restored your phone back to stock, you still have the Synergy Logo when turn on and you lose your USB drivers, somehow, I don't know why. I tried so many ways for my computer to locate my phone, but after so many hours of looking, I gave up. Sold my phone to my friend and got another one.
Lesson learn. Someone should look into a solution for this problem
Thanks.

Mr_creeper_98 said:
Hey Buddy, there had been a few of us that has had the same problem.
For some reason, after you restored your phone back to stock, you still have the Synergy Logo when turn on and you lose your USB drivers, somehow, I don't know why. I tried so many ways for my computer to locate my phone, but after so many hours of looking, I gave up. Sold my phone to my friend and got another one.
Lesson learn. Someone should look into a solution for this problem
Thanks.
Click to expand...
Click to collapse
This is good to know for anyone that is looking to restore phone back to stock.
So I'm guessing people should install stock kernel first via Odin and then flash stock rom/recovery.
Maybe this will take care of Synergy logo.
What steps did you take?
Powered by the SGSII....

ThC23 said:
This is good to know for anyone that is looking to restore phone back to stock.
So I'm guessing people should install stock kernel first via Odin and then flash stock rom/recovery.
Maybe this will take care of Synergy logo.
What steps did you take?
Powered by the SGSII....
Click to expand...
Click to collapse
I used the easiest unroot method ever
http://forum.xda-developers.com/showthread.php?t=1323878

ThC23 said:
This is good to know for anyone that is looking to restore phone back to stock.
So I'm guessing people should install stock kernel first via Odin and then flash stock rom/recovery.
Maybe this will take care of Synergy logo.
What steps did you take?
Powered by the SGSII....
Click to expand...
Click to collapse
+1 From the posts Ive read the people that have had this issue have used the zedomax flash. Safest bet for anyone looking to go back to stock should stick with the odin method. I think there should be a warning in the index thread next to the [HOWTO] [ROM] How to Unroot SGH-T989 Painlessly link about the usb issue and also the kernel boot image even thou if people would just read the whole thread they would see that others have already reported the kernel image issue......

Returning the phone with that would land you an out if warranty fee
Sent from my SGH-T989 using Tapatalk

Mr_creeper_98 said:
I used the easiest unroot method ever
http://forum.xda-developers.com/showthread.php?t=1323878
Click to expand...
Click to collapse
If you flash this stock kernel zip before you flash the easiest unroot method ever it will give you stock kernel and remove any custom kernel logo.
http://db.tt/mYZw1F8w
Powered by the SGSII....

yeah but is was too late to know that, so there's no way we can use the samsung recovery mode with the install from SD option?

Is your recovery stock. ? If its not you can always put it your sd card and flash it that way.
le14 said:
yeah but is was too late to know that, so there's no way we can use the samsung recovery mode with the install from SD option?
Click to expand...
Click to collapse
Sent from my SGH-T989 using XDA App

[Q] Samsung galaxy s2 t989 bricked after trying to root

Hi everybody, im new here.. so i'll go to the point.. i had recently buy a samsung galaxy s2 tmobile t989 version, im from south america, so i need it to root the phone in order to unlock it for all the operators.. so i followed this tutorial step by step http: //galaxys2root.com /galaxy-s2-root/ how-to-root-t-mobile-galaxy-s2-sgh-t989/ (just fill the spaces)
Now.. once the the odin finished.. the cellphone got in a boot loop, i couldn't even go to the recovery mode.. because in the recovery mode also reboots.. and now.. the phone wont turn on.. and when i connect to the pc via usb.. y get that noise.. its like two fast tinun (dont know how to explain) and now i dont know what to do because the only way i think this could be fixed is via JTAG but no one does that here.. only in the USA.. anybody can tell me why that tutorial didnt work and what can i do now?

I had that issue aswell. My phone got into bootloop and recovery actions rebooted the device. Only difference is that it happened after a regular reboot, not after Odin.
I'm not sure why your device isn't turning on, though. Maybe it just got completely discharged. Try to leave it connected to your PC for a while and then try to turn it on again.
Try downloading this Stock ROM: http://forum.xda-developers.com/showthread.php?t=1350360
And follow these instructions on how to install it properly.

its not a battery issue cuz i have another galaxy s2, the international version.. and i managed to put the battery from the t989 in the international and charged it.. still.. the phone doesnt turn on.. so i cant do any odin stuff.. when i connect to the pc i get that the QHSUSB_DLOAD driver was not found..

Are you sure you're in 'Download Mode' when you connect to the PC?
Hold Vol Up + Vol Down and then connect the USB to the device.

ToastMan12 i already said.. "the phone wont turn on" i cant put in download mode or recovery or any mode.. WONT TURN ON

OK dude. Was just making sure...
Sent from my SGH-T989 using xda premium

i just downloaded some qualcomm drivers for the QHSUSB_DLOAD, they worked, and now odin recognizes my phone even its not turned on.. now the question is.. what do i do? what files i have to put in the PDA?

The stock rom previously stated
If it doesn't pass do it again sometimes doesn't pass first try. It might hang a few minutes be patient
Sent from my SGH-T989 using Tapatalk

MyS2isDead said:
i just downloaded some qualcomm drivers for the QHSUSB_DLOAD, they worked, and now odin recognizes my phone even its not turned on.. now the question is.. what do i do? what files i have to put in the PDA?
Click to expand...
Click to collapse
Where did you get the drivers?
Sent from my NookColor using Tapatalk

i downloaded from here.. http://attachments.xda-developers.com/attachment.php?attachmentid=631288&d=1308601930 i dont know if they will work when i try to flash the stock rom or not.. for now.. i have to download the rom and try it

MyS2isDead said:
i downloaded from here.. http://attachments.xda-developers.com/attachment.php?attachmentid=631288&d=1308601930 i dont know if they will work when i try to flash the stock rom or not.. for now.. i have to download the rom and try it
Click to expand...
Click to collapse
What did you do with the files. I extracted them and plugged in my device and still get the noise but nothing.... You said it odin recognizes your device now?

yes, go to the device manager, and install the drivers from there, then, odin will recognize your device

MyS2isDead said:
Now.. once the the odin finished.. the cellphone got in a boot loop, i couldn't even go to the recovery mode.. because in the recovery mode also reboots..
Click to expand...
Click to collapse
Sounds like you applied a file made for a different device via odin.
Sent from my SGH-T989 using XDA App

Got it to recognize the device. Downloading stock to see if I can flash it.
Trying to flash stock rom and it's stuck on setup connection for about 3-4 minutes. I'm gonna let it sit for a while to see what she does.
Don't think I can get anywhere since it wont go into download mode gotta wait til my jig gets here tomorrow and then we'll really see what's up.
Sent from my NookColor using Tapatalk

let me know if works.. i dont know how to flash the rom via odin.. i downloaded the rom but i dont know what file i have to use.. i bought an usb jig too but i'll get on january.. sucks living on south america

MyS2isDead said:
let me know if works.. i dont know how to flash the rom via odin.. i downloaded the rom but i dont know what file i have to use.. i bought an usb jig too but i'll get on january.. sucks living on south america
Click to expand...
Click to collapse
I'll let you know how it goes. You should look up how to make one since you have to wait that long.
Sent from my NookColor using Tapatalk

MyS2isDead said:
let me know if works.. i dont know how to flash the rom via odin.. i downloaded the rom but i dont know what file i have to use.. i bought an usb jig too but i'll get on january.. sucks living on south america
Click to expand...
Click to collapse
Follow the procedure that I linked to in my first reply. You need to flash this file: T989UVKID_HOME_SGH-T989user_CL594724_REV00.tar.md5

i did try to make one myself.. but there is always the doubt if it didnt work cuz i made it wrong or just didnt work.. thats why i bought one.. thanks.. i'll wait for your update

ToastMan12 said:
Follow the procedure that I linked to in my first reply. You need to flash this file: T989UVKID_HOME_SGH-T989user_CL594724_REV00.tar.md5
Click to expand...
Click to collapse
Can't flash unless you can get to download mode. That's the bummer. I mean my new device will be here tomorrow so we'll see.
Sent from my NookColor using Tapatalk

MyS2isDead said:
i did try to make one myself.. but there is always the doubt if it didnt work cuz i made it wrong or just didnt work.. thats why i bought one.. thanks.. i'll wait for your update
Click to expand...
Click to collapse
That's too bad.
Sent from my NookColor using Tapatalk

SAMSUNG epic 4g stuck on boot screen after trying to restore Stock Rom

I was running CM10 but I got a message whenever I got into the Camera App that said "Unfortunately, Gallery has stopped working", after a research in here I found that I wouldn't get that msg again if I installed this "gapps-jb-picasa-20121011-signed" thing.
I did, but when I got into my Camera App, I didn't have the other options like "Image Effects" and all that stuff.
So, what I did was to Restore my phone from my BackUp folder that I've created before installing CM10, but for my surprise I got a msg saying "VolumeError" or something like that and other things that I can't really remember... and as a good Mexican that I am, I ignored it and hit the Reboot System Now..
What happened next almost made me cry...
I was expecting to get in my stock rom without any problems and yadda yadda but... OH SURPRISE!
I got stuck on the boot screen, where it says "Samsung" and the website of it and I didn't freak out... I waited like 5-6 mins and took the battery out. When I turned again, I tried to get in Recovery Mode but the screen just kept turning off and on and saying the exact same thing, the "Samsung" logo and it's website.
I hope you can help me and please answer me. I don't know if I'm 1000000% screwed but I will only wait for the worst. Sorry for my bad english and don't hate me for being mexican
I don't know if I can get into my phone from my PC but whenever I plug my phone in, it just loads it as if it was in Charging Mode
PLEASE HELP ME!
I BEG YOU!

Flash again CM10 with wipe data, cache, dalvik
If still stuck
Odin to stock ROM, you can search on google to odin the epic
Sent from my JellyBeer v.4.14 epicmtd (b3)

Questions go in Q&A
Thread moved
Friendly Neighborhood Moderator

Like @dropple said, it seems you stuck "SAMSUNG" and in this case you can't get into recovery so you can't flash CM10 as of now. Go find some tutorials and Odin back to stock via download mode. Then install CWM recovery if you want and do whatever you like. Should get you outta trouble.
Sent from HTC Incredible S @ PACman v21

AndyYan said:
Like @dropple said, it seems you stuck "SAMSUNG" and in this case you can't get into recovery so you can't flash CM10 as of now. Go find some tutorials and Odin back to stock via download mode. Then install CWM recovery if you want and do whatever you like. Should get you outta trouble.
Sent from HTC Incredible S @ PACman v21
Click to expand...
Click to collapse
Thanks to Everyone!
I solved this like 2 hrs after all this happened.
I got it by Odin. I couldn't go into Recovery Mode, but I got in Download Mode and do it by Odin.
Sorry, I'm a n00b to all this.
Greetings from México and thanks for all your support.

Here's a weird one for you,
Same thing as OP stated. Device is stuck on logo. Can't get into CWM. Was on People's Rom. Device was lagging really bad. Then the system requested superuser permissions. Yes the system requested. Being as I did not request it, I declined. Shut the device down to see if that would help with the extremely bad lag (i mean BAD lag. Like..........................ok it does something then.......................................................................ok it does something else. 10-20 seconds lag)
Connect device to computer to Odin back to Stock or whatever ROM would have worked, computer recognizes device..... wait for it.......
But in download mode Odin does not see it. Com Port will not illuminate. Tried 3 different cables. Tried 6 different USB ports on computer. Still nothing.
Any ideas, because I'm all out?!?

To the OP:
I would follow the instructions in this video from the part where qbking77 talks about putting the phone in download mode, as you presumably did when you first rooted your phone. Download all the files linked/referenced on the site, especially the Samsung mobile drivers, Odinv3 1.87, CWMRecovery, and the deOxed versions of the stock ROM. In sum:
1) get into recovery mode by holding onto the volume down, camera buttons, and then without letting either of those go, press and hold the power button.
if you get into recovery mode, skip to step 4
2) while your phone is completely off, hold onto the "1" button on the slide out keyboard first, then without letting the 1 button go, press and hold the power button until you're in download mode.
3) flash the version of Clockworkmod
4) once in recovery mode, wipe your phone, clear the cache, and dalvik cache, and then flash the deOxed version of the stock ROM
niteNarmor said:
Here's a weird one for you,
Same thing as OP stated. Device is stuck on logo. Can't get into CWM. Was on People's Rom. Device was lagging really bad. Then the system requested superuser permissions. Yes the system requested. Being as I did not request it, I declined. Shut the device down to see if that would help with the extremely bad lag (i mean BAD lag. Like..........................ok it does something then.......................................................................ok it does something else. 10-20 seconds lag)
Connect device to computer to Odin back to Stock or whatever ROM would have worked, computer recognizes device..... wait for it.......
But in download mode Odin does not see it. Com Port will not illuminate. Tried 3 different cables. Tried 6 different USB ports on computer. Still nothing.
Any ideas, because I'm all out?!?
Click to expand...
Click to collapse
Do you have the mobile drivers installed on the computer you're trying to connect your phone to?

Yes. The drivers have been installed previously. The computer will see the device as "Samsung SPH-D700 Card USB Device". But Odin3 1.85 will not see it.
EDIT: When I put device into download mode and connect to computer, the computer only sees it as "Gadget Serial".

niteNarmor said:
Yes. The drivers have been installed previously. The computer will see the device as "Samsung SPH-D700 Card USB Device". But Odin3 1.85 will not see it.
EDIT: When I put device into download mode and connect to computer, the computer only sees it as "Gadget Serial".
Click to expand...
Click to collapse
Uninstall and reinstall drivers.
Sent from my SPH-D700 using Tapatalk 2

Have already done that. But just for laughs, I did do it again with no change.

can you get your D700 into download mode as described above?

Yes I can get into download mode but without Odin recognizing the device (not computer. The computer recognizes the device) there is not much I can do.

niteNarmor said:
Yes I can get into download mode but without Odin recognizing the device (not computer. The computer recognizes the device) there is not much I can do.
Click to expand...
Click to collapse
Try to install another version of Odin or getting Odin from a different server.
My phone is fully recovered and now I'm only SuperUser 'cause I don't want any CM by now.
Greetings from Mexico!

I'm using the same version of Odin I used to root the device. Would a different version really help and if so, what version to use?
I actually have a different version of Odin I used for another device and tried that one as well, with no luck.
EDIT: I have now downloaded and tried 4 different Odin programs with no avail. Again, that makes 6 Odin programs, 6 different USB ports, 3 different cables with the same exact results. The computer recognizes device but Odin will not.

niteNarmor said:
I'm using the same version of Odin I used to root the device. Would a different version really help and if so, what version to use?
I actually have a different version of Odin I used for another device and tried that one as well, with no luck.
Click to expand...
Click to collapse
Had a simular issue when I had two odins on the same computer, for a lark and as I had nothing better to do, tried installing drivers and one version of odin to a vertual machine running vista and checked to see if my computer's vertual machine would reconize and it did, I took it as a sine that at one point I had done something to my computer's main os sometime between rooting my epic 4g and frying it (recovering from a backup from a different parition layout I think, bad times with bootloops and seeing way to much of the samsung logo.) So as I'm not brave enough to run odin on vm I instead removed all of odin from my main os and all of the samsung drivers, then reinstalled rebooted and repluged my epic in, got reconition and reflashed with plesure.
The other issue might be that your computer is reconizing the device and try/failing/hanging and not allowing odin in. Had an issue when my computer was failing to pop up a 'what do I do with this' window and hanging round in the system. A reboot with the internet unpluged strangely solved that for some reason, might be the reboot might be the combo, but I find better connection reconition with my computer when I've fewer things connected.
Don't mind the spelling to much I clean up with my other device.
Sent from my T-Mobile myTouch 3G Slide using xda app-developers app

One question I noticed that hasn't been asked is when you plug the phone into the computer while the phone is on, is usb debugging checked? If not, check it, and reinstall drivers again.
Sent from my SPH-D700 using Tapatalk 2

jeffreyjicha said:
One question I noticed that hasn't been asked is when you plug the phone into the computer while the phone is on, is usb debugging checked? If not, check it, and reinstall drivers again.
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
Phone does not boot past the "Samsung - www.samsung.com" logo. Plus, as with all of my devices, USB debugging is always checked.
Thanks for the suggestion though. Always helps to double check things.
I believe I am going to take it to Sprint tomorrow.
If I can't get into it, they should not be able to get into to it either. If they can't get into it, HELLO WARRANTY....

Perhaps before doing the whole getting found out thing with the return center, perhaps they do know what they're doing, try rolling this link past your eyes?
http://forum.xda-developers.com/showthread.php?t=773032
I know I've been in your boot problem situation and recovered, it just took persistence and eyenumbing amounts of reading.
Note On the multiple Odin, USB, and driver installation: if you've access to another computer it could be worth wile to run once though on a previously virgin computer, meaning your phone and computers' USB's have never touched. Just do the installation, rebooting, and plugging in exasperatingly meticulous order.
Sent from either my SPH-D700 or myTouch3Gs using XDA app
"it never hurts to help"

Yep tried the "virgin computer" computer as well. The computer sees the device but Odin does not. Com light will not illuminate.

Sounds grim.
So to rap up all the cables, plugs, computer, and software with odin is out of the debug process.
So I did some digging into the past and if your computer is reconizing and odin is not then ADB (android debug bridge) and the sdk are the other option
http://forums.androidcentral.com/epic-4g-rooting-roms-hacks/33427-how-access-your-adb-shell.html
Ran across this and it might just be what you need. Its not quick but it has worked for me in the past.
The other thing that may work is ejecting the sd card and battery before doing anything. Though its likely something you've already tried.
Sent from either my SPH-D700 or myTouch3Gs using XDA app
"it never hurts to help"

[Q] Phone wont boot

I have Samsung Galaxy Note 2 sgk-i317 16gb with a removable micro sd.
Yesterday I was trying to reset my phone and I did something wrong.
I somehow deleted my OS
The phone will boot in the "Downloading..." mode or doing the up volume to get to the TWRP page
I booted it in the downloading mode and now I dont know if I can turn it off again to get back to TWRP mode
I tried to install several roms before with twrp, some would say success, but do nothing, others wound simply fail.
Im in downloading mode, but it wont connect to my computer. I figured I could just get it back on Odin and start over and do a clean install.
My computer sees a device, but even after installing several versions of the samsung drivers it wont find it.
Kies wont find it either.
I dont know what else to do. Ive been messing with this for 12 hours now. All my stuff was backed up so I dont mind clearing the phone completely out, but idk where to go from here. Any help would really be appreciated.
Im new to smart phones so if you could dumb down your responses I'd really appreciate it. Thanks!

Try this... http://forum.xda-developers.com/showthread.php?p=40966346
I know you said kies won't recognize the phone. When mine didn't boot. Nothing wasn't working. But when I used this method worked like a charm. And keep in mind when using this. When you plug up the phone to the pc. It's not going to do anything, but it will find it and load the stock firmware on there...
Good luck buddy...
Hopefully that resolves your issue
Sent from my SAMSUNG-SGH-I317 using Tapatalk

Bajanman said:
Try this... http://forum.xda-developers.com/showthread.php?p=40966346
I know you said kies won't recognize the phone. When mine didn't boot. Nothing wasn't working. But when I used this method worked like a charm. And keep in mind when using this. When you plug up the phone to the pc. It's not going to do anything, but it will find it and load the stock firmware on there...
Good luck buddy...
Hopefully that resolves your issue
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Kies wont see it.
Ive tired over 20 times.
I even tried the firmware upgrade and install by manually putting in my phone info, but it still doesnt see it.
I rebooted and can still get into either this mode or the TWRP mode.
Any more ideas? I really appreciate the help I cant afford another phone and this one was a gift :/

Flash stock with Odin maybe?
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

inconceeeivable said:
Flash stock with Odin maybe?
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Odin wont see it. Id like to flash it stock just to get it running again.
Ive reinstalled the drivers, as well as older versions I found online and none of them are working.
Windows xp computer (old and ****ty) doesnt even pop up that I plugged something in.
My pc Win8 Does see it, but doesnt recognize it. Reinstalling drivers doesnt help.
Odin wont see it.
I can get back to the TWRP mode, so I thought putting a rom on my micro would work, but I havent found a rom that wanted to work yet.
Anyone have one that is known to work with Samsung Galaxy Note 2 SGH-i317?

Could I use keys to download the orig. rom and then use TWRP to install the rom?

I installed:
senselesskingdom 1.2.3 TWRP. zip
using TWRP
It says "success"
But just boots back into TWRP

You are not using a version for the note 2. The version is 2.6.something.

HELP Note II stuck on splash screen

Dear all. I have a note II that has gone wild. The phone was working fine but then I received a note 4 and put the note 2 aside. Then I was trying to install root and was able to do so by installing TWRP V2.8.3 and everything went smooth and the phone was rooted. I then used the phone for a while but switched to the note 4 after. Now, 5 months after, I wanted to check something on my olde note II. I charged the phone and switched it on but it was stuck on the Galaxy note II screen I rebooted then rebooted but still the same. I went in the TWRP recovery to try to do something but I was not able to because it says that it cant mount storage, cant mount efs, cant mount data, cant mount cache and cant mount system.
Then I have decided to install the firmware image from zipped file but that did not work as it sees that the internal and external storags are 0 and cant mount them.
Then I opted to try and install the firmware PDA through Odin but that also did not work as Odin was not able to detect the phone. Now I'm clueless and not sure what to do the only thing I'm able to do is boot in TWRP recovery and that is all. Can any one help.
My phone had the latest official rom from samsung the 4.4.2
Please help

classic, just search. there is a thread with tutorial how to get your n2 back to life. you could also have sds, but try different odin and flash with pit

Ok now I'm in a worse situation. I have managed to get to the download mode and connected it to ODIN and tried to flash with the stock rom but at the end of the writing process it failed and started to get a message on the phone to connect my device to kies and try again. I tried that but did not do anything. Then I tried Odin again but this time I unticked the auto reboot. then clicked start. The same thing happened as before and writing failed now though my phone is blank it does not show anything and it does not want to turn on and no LED that is turning on nor the charging icon. I searched the net and someone suggested that the battery is damaged. I replaced the battery but still no go. Please I really need to get that phone back alive. I think I bricked it. any ideas or directions to help me with this annoying case. I cant even boot to recovery nor download please help

No one can help

sambosat said:
No one can help
Click to expand...
Click to collapse
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.

Christopher11 said:
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Click to expand...
Click to collapse
Finally someone gave me an advise. Thank you Chris. The problem is the phone is blank and cant go to download mode. It looks like that I have bricked it and not sure how to get back

sambosat said:
No one can help
Click to expand...
Click to collapse
sambosat said:
Finally someone gave me an advise. Thank you Chris. The problem is the phone is blank and cant go to download mode. It looks like that I have bricked it and not sure how to get back
Click to expand...
Click to collapse
Can you make a Video what exactly happens when you :Remove battery and Restart phone, Restart phone into Download Mode and/or Recovery? Thx :good:

Christopher11 said:
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Click to expand...
Click to collapse
Christopher11 said:
Can you make a Video what exactly happens when you :Remove battery and Restart phone, Restart phone into Download Mode and/or Recovery? Thx :good:
Click to expand...
Click to collapse
As I said when I remove the battery and insert it back the phone remains blank no response to any button pressed.
What I did is that my phone was stuck on opening screen samsung screen. Then someone suggested to flash it with the stock rom. So I went to Sammobile site and downloaded the latest firmware. I tried to install it to my phone using ODIN and just before the end. ODIN failed. I tried it the second time and the same happened. then the third time I read that I have to untick auto reboot. I did and tried ODIN for the 3rd time and on the third trial I got the same fail message and then I wanted to boot into download mode for the forth time but this time the phone went dead and not responding to any button press. I hope that this explains the situation

Hmmm.. That Sounds really tricky.. Never saw a Device before thats so bricked.. When really nothing worked from this Forum may you let an expert give a look on your Phone, i know some official Samsung shops, maybe they can help.. Sry that i cant hell you like you want it and sry for my Bad English.. Good Luck with your Note 2

Christopher11 said:
Hmmm.. That Sounds really tricky.. Never saw a Device before thats so bricked.. When really nothing worked from this Forum may you let an expert give a look on your Phone, i know some official Samsung shops, maybe they can help.. Sry that i cant hell you like you want it and sry for my Bad English.. Good Luck with your Note 2
Click to expand...
Click to collapse
No worries bro. At least you are trying. I have never seen this before either and I'm stumped and where I'm I dont think I can find any samsung pro shop. All what they are going to say is the motherboard is dead and you need to change it. I do have another phone but I hate it when a devise does this to me