Related
OK I was trying to flash an unlocked kernal via ODIN last night, something went wrong and now phone is stuck on the phone--!--computer screen. I cannot get past this screen. vol+home+power doesn't do anything but loop to the same screen.
It shows ODIN MODE in red at the top of the screen, but ODIn won't recognize the phone, nor will Kies (not running at the same time). Computer makes USB connected/disconnected sound when I plug and unplug the phone.
I have tried One-Click Unbrick, did not recognize that phone was connected.
Help!!
which model of Galaxy S2 do you have?
T-Mobile SGH-T989
hose902 said:
T-Mobile SGH-T989
Click to expand...
Click to collapse
there''s currently nothing to flash this phone
it came out only 2 days ago
DEV are still working on finding root
so, the best suggestion is to take it back to the store and get it exchanged
or wait a few more days/weeks until a flashable release becomes available to fix the mistake
I know, I was hasty and now this. Even when there something available to flash, the device isn't being recognized by ODIN. Any troubleshooting help for this?
When I managed to get my Vibrant into that mode I could pull the battery, hold volume up, put the battery in, press and release power (still holding volume up) and it'd kick back into download mode everytime. Once in download mode I could plug the USB in and a running ODIN would see it pop up. If ODIN wasn't running and USB was already plugged in things wouldn't work right.
I haven't tried ODIN on the GS2 yet (I'll wait for a root ). I did find the vibrant nearly impossible to brick though... trust me I unexpectedly tried quite hard.
You might need the newest ODIN for GS2 support, and possibly newer drivers.
Hey, Hey, Hey...
My Story...
1. I got a TMO Samsung Galaxy S2
2. Tried to root
3. Used Odin to root and install ROM and referenced the following thread: http://forum.xda-developers.com/showthread.php?t=1095274
4. Realized phone models are not the same
5. Phone does not boot and nothing comes up on the screen
6. No lights or LED indicators (i.e. charging) HOWEVER....
7. ODIN recognizes the phone when I plug in the phone via USB
8. Tried to load stock rom:http://forum.xda-developers.com/showthread.php?t=1321811
9. ODIN gets stuck on <ID:0/005> SetupConnection...
10. I am unable to access SD Card for CWR
11. Next step? Return or exchanges are currently not an option.
Thanks in advance for the assistance!
fix4tv said:
Hey, Hey, Hey...
My Story...
1. I got a TMO Samsung Galaxy S2
2. Tried to root
3. Used Odin to root and install ROM and referenced the following thread: http://forum.xda-developers.com/showthread.php?t=1095274
4. Realized phone models are not the same
5. Phone does not boot and nothing comes up on the screen
6. No lights or LED indicators (i.e. charging) HOWEVER....
7. ODIN recognizes the phone when I plug in the phone via USB
8. Tried to load stock rom:http://forum.xda-developers.com/showthread.php?t=1321811
9. ODIN gets stuck on <ID:0/005> SetupConnection...
10. I am unable to access SD Card for CWR
11. Next step? Return or exchanges are currently not an option.
Thanks in advance for the assistance!
Click to expand...
Click to collapse
I'm a bit new to this, but a custom ROM shouldn't affect your recovery mode. Are you sure you are using the correct buttons and methods to boot recovery?
Might want to make a new thread instead of necroing something from when the phone was 2 days old.
I have GT I9100 and done the same thing and got the same result . stuck at setup connection with odin
Please Help
Go into device manager when is plugged in and if it says qhd-usb or something like that its a hard brick. What tipped me off was you said it makes two noises when you plug in. that's a tell tell sign your hard bricked
Sent from my SGH-T989 using xda premium
soft bricked my phone (i hope)
i have sgh-t989 (t-mobile) i am running a miui rom. it wont boot it just goes to miui boot up screen. i can go to the download mode but not recovery (how do u do that) but when im in downoad mode Odin dosnt recognize my phone. and my computer says it is an unknown device.
tried new wire, uninstalling re-installing kies, stopped all processes, diff computer tried to boot for a day, let battery out for a day, and a few other things.
please help and thank you.
iamnoone626 said:
i have sgh-t989 (t-mobile) i am running a miui rom. it wont boot it just goes to miui boot up screen. i can go to the download mode but not recovery (how do u do that) but when im in downoad mode Odin dosnt recognize my phone. and my computer says it is an unknown device.
tried new wire, uninstalling re-installing kies, stopped all processes, diff computer tried to boot for a day, let battery out for a day, and a few other things.
please help and thank you.
Click to expand...
Click to collapse
You should try to uninstall then reinstall driver, and try another usb port. In my experience, Odin seems to be picky, it only recognizes your phone if you plug it in the usb port that you used in the first time.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Recovery is accessed by holding both vol + and - while starting the phone. Hold them both while pressing the power button, then release the power button when it vibrates, keep holding the vol buttons till you see the recovery screen.
Alarmmy said:
You should try to uninstall then reinstall driver, and try another usb port. In my experience, Odin seems to be picky, it only recognizes your phone if you plug it in the usb port that you used in the first time.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
ok i have done this through kies is there another way that you can do this?
---------- Post added at 09:34 AM ---------- Previous post was at 09:26 AM ----------
nagoshi said:
Recovery is accessed by holding both vol + and - while starting the phone. Hold them both while pressing the power button, then release the power button when it vibrates, keep holding the vol buttons till you see the recovery screen.
Click to expand...
Click to collapse
when i do this it only takes me to download mode.
Have a look at http://forum.xda-developers.com/showthread.php?t=1513359
for a DL link for the USB Drivers
Cheers,
Chris
Sk3tchy said:
Have a look at http://forum.xda-developers.com/showthread.php?t=1513359
for a DL link for the USB Drivers
Cheers,
Chris
Click to expand...
Click to collapse
i tryed this but still odin does not recognize my phone. (no yellow box shows up)
Hi XDA,
I've searched in many threads but i can't find an anwser.
I've bricked my Galaxy Gio when i flashed a custom kernel. It was the kernel in this thread http://forum.xda-developers.com/showthread.php?t=1319816
Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
I have android 2.3.3 Gingerbread.
Is there any way to unbrick or is my phone just an expensive decoration now.
Thanks in Advance.
Hi !!!
same new here
This ll work in some cases
Hope this will work in your device as well
Pull the battery to kill the boot loop (or whatever is hosed up), put the phone into downloading mode and re-flash the stock ROM.
Free to try...
Thanks for quick reply but i can't go into download mode as i said. Also my phone is just totally off and won't boot at all. My pc also doesn't detect it when it is plugged in.
SuperUub said:
Thanks for quick reply but i can't go into download mode as i said. Also my phone is just totally off and won't boot at all. My pc also doesn't detect it when it is plugged in.
Click to expand...
Click to collapse
If not even adb detects it, i'm pretty sure you're buggered, mate.
did you try and leave the battery out for some 10 min or more?
If adb does not detect the phone after that, then it seems to be a brick for real.
Is your phone stop at the "samsung" when you turn on your phone?
If is this,it's very easy to unbrick
One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado
+
Yes this way usually works. I've tested this way.
that worked for me to on a brick when it didnt even went on, no recovery, download mode etc, after waiting 2 weeks and trying to repair it myself I nearly throw it away, and then suddenly it went into download mode for about 1 or 2 seconds, wich told me the battery whasn't working.. so I started to charge the battery, and hoped it would boot, but it didn't.. using that method given above, I could get into download mode again, and flashes a new stock ROM. now I still have my phone, working.
Odin to detect
Darkshado said:
One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado
Click to expand...
Click to collapse
i i need help, odin detects my phone but dont pass from -"setup connection", did you have news?
I had my mainboard replaced at a service center... Probably not the news you would have liked, but I'm afraid that's your next step as well.
Darkshado said:
One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado
Click to expand...
Click to collapse
This worked for me too, try to charge your battery in another phone if possible
bobcota said:
i i need help, odin detects my phone but dont pass from -"setup connection", did you have news?
Click to expand...
Click to collapse
same problem
same problem here
voetbalremco said:
that worked for me to on a brick when it didnt even went on, no recovery, download mode etc, after waiting 2 weeks and trying to repair it myself I nearly throw it away, and then suddenly it went into download mode for about 1 or 2 seconds, wich told me the battery whasn't working.. so I started to charge the battery, and hoped it would boot, but it didn't.. using that method given above, I could get into download mode again, and flashes a new stock ROM. now I still have my phone, working.
Click to expand...
Click to collapse
i also have the same prblem here just now , i tried to flash this ROM but i forgot to wipe data/factory reset the phne and i unintentionally flashed the rom without wiping it :'( and now, dont boot at all but can still turned on and ended up just "samsung" appearing on the screen . please help :crying::crying:
I've bricked my Galaxy Gio when i flashed a custom kernel.
Hi There I also have the same problem. I installed Galaxy Ace's Kernel onto my Galaxi Gio, Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
S[B said:
[/B]uperUub;20668671]Hi XDA!
I've searched in many threads but i can't find an anwser.
I've bricked my Galaxy Gio when i flashed a custom kernel. It was the kernel in this thread http://forum.xda-developers.com/showthread.php?t=1319816
Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
I have android 2.3.3 Gingerbread.
Is there any way to unbrick or is my phone just an expensive decoration now.
Thanks in Advance.
Click to expand...
Click to collapse
Not either going to Download Mode
trackIDtracker said:
Hi !!!
same new here
This ll work in some cases
Hope this will work in your device as well
Pull the battery to kill the boot loop (or whatever is hosed up), put the phone into downloading mode and re-flash the stock ROM.
Free to try...
Click to expand...
Click to collapse
When I finish restore my back up, I reboot my phone and it get brick (JUGG 5.0)!!! I cannot even press any button to turn the screen on!! Already try with different charger, battery and sim card also!! Does someone have any idea please!!
Try the long power button press. Press the power button and hold it for like 10 seconds (Maybe more, it always feels more then 10 seconds). The phone should vibrate 3 times and then you release.
If that doesn't work, then see if you can get into download mode and get Odin to recognize your phone.
I already try, I press it nearly 1 minute, but the screen doesn't turn on!
what exactly are you doing? you were making a backup in cwm, it finished and then you rebooted?
I flash a new Rom, but I don't like it. So I use Darkside Superwipe to wipe all cache and data of that Rom so that I can do the back up. After the back up process is finished,(I see everything runs well). I reboot the phone and it gets brick.
gunbreak said:
I flash a new Rom, but I don't like it. So I use Darkside Superwipe to wipe all cache and data of that Rom so that I can do the back up. After the back up process is finished,(I see everything runs well). I reboot the phone and it gets brick.
Click to expand...
Click to collapse
I am not quite understanding. You made backup, or did you restore a backup that you previously made? Anyways, If the phone wont boot try to put in in dl mode and odin it back to stock.
xcrazydx said:
I am not quite understanding. You made backup, or did you restore a backup that you previously made? Anyways, If the phone wont boot try to put in in dl mode and odin it back to stock.
Click to expand...
Click to collapse
Oh I understand u, I restore my back up. How can I put it in the mode that you say? I can't even turn the screen on can you please help me!
gunbreak said:
Oh I understand u, I restore my back up. How can I put it in the mode that you say? I can't even turn the screen on can you please help me!
Click to expand...
Click to collapse
Before you try to odin it, can you get into cwm by holding the volume up, down, and power. Release power when first samsung logo appears. stay holding vol buttons until cwm pops up. can you get into this?
xcrazydx said:
Before you try to odin it, can you get into cwm by holding the volume up, down, and power. Release power when first samsung logo appears. stay holding vol buttons until cwm pops up. can you get into this?
Click to expand...
Click to collapse
No, it doesn't work. All the buttons freeze now
You most likely are hard bricked, but you still have a slight chance to get into download mode. Not sure how you managed a brick by restoring a backup, but I'll try to help.
Ok, you are going to need the drivers for your phone. http://www.mediafire.com/file/6onrjbyd46j4lhj/T-Mobile_t989_GSII_ADB_Drivers.zip
You need odin as well, download it. http://www.mediafire.com/?u868rqz4qn0ta34
These links were provided by KonstantinKeller
Go here http://www.sammobile.com/firmware/ and make an account. I use sammobile because it contains everything in one shot. No need to get radio and crap from other places. After you make an account go to firmware section and type t989 in the search box. download the t989uvkid. ASSUMING YOU HAVE AMERICAN T989
After you have completed the download you are going to need to unzip it with 7zip to extract the tar.
Plug the USB cable into your computer, without plugging it into your phone.
Hold VOL UP + VOL DOWN while plugging in the USB cable to your phone. Stop holding buttons when the ''Warning'' appears.
Press Volume UP and start ODIN (Run as Admin on Vista and 7, just to be safe)
Click PDA and locate the MD5 file you extracted earlier.
WAIT FOR ODIN TO RECOGNIZE YOUR PHONE. THE COM PORT WILL TURN YELLOW AND HAVE A NUMBER
MAKE SURE NOTHING BUT AUTO REBOOT IS CHECKED!!!!!!!
Press 'Start' and be patient. It will take a few minutes because it is a large file.
phone will reboot automatically.
If you can't get the phone to be recognized try different usb ports or a different computer if you have another. This may not work at all, considering it sounds like you are hard bricked. Good luck!
I should download T989UVKID or T989UVKL1? I think my phone get android 2.3.6
gunbreak said:
I should download T989UVKID or T989UVKL1? I think my phone get android 2.3.6
Click to expand...
Click to collapse
it won't matter. if you want the newest grab kL1
Window told me "no driver found" after I already installed the samsung driver!
gunbreak said:
Window told me "no driver found" after I already installed the samsung driver!
Click to expand...
Click to collapse
Delete that driver setup and use kies. http://www.samsung.com/us/kies/
I think it already died, no driver found again. I try in device manager, it appears as Samsung Android ADB interface, but nothing appears on my screen it's such a hard brick....
gunbreak said:
I think it already died, no driver found again. I try in device manager, it appears as Samsung Android ADB interface, but nothing appears on my screen it's such a hard brick....
Click to expand...
Click to collapse
Just do this and see if it goes into DL mode.
Plug the USB cable into your computer, without plugging it into your phone.
Hold VOL UP + VOL DOWN while plugging in the USB cable to your phone. Stop holding buttons when the ''Warning'' appears.
If not, you have 2 options
Send to this guy for jtag repair for $50 http://mobiletechvideos.mybigcommerce.com/
OR warranty it through samsung
I should warranty it through Samsung or ask for replacement phone through Tmobile? (I have insurance in my plan). I wonder if Tmobile find out my phone is rooted and I have to pay for the replacement phone. Do you have any idea?
gunbreak said:
I should warranty it through Samsung or ask for replacement phone through Tmobile? (I have insurance in my plan). I wonder if Tmobile find out my phone is rooted and I have to pay for the replacement phone. Do you have any idea?
Click to expand...
Click to collapse
You can go to the tmobile store and tell them it wont turn on. you wont need your insurance plan, the phone carries a warranty against defects for 1 year. Just play dumb and say it wont turn on and demand a new phone.
Do u have any idea if Tmobile check the phone or not?
gunbreak said:
Do u have any idea if Tmobile check the phone or not?
Click to expand...
Click to collapse
They can't tell anything if it's hard bricked. You're fine man, Get a new one.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Hello Good people of xda forum
please i have a very big problem at my hand involving my newly acquired galaxy note II, the international version and i was hoping that some of you could help me out here because this is driving me nuts.
My galaxy note II is 2 weeks old and i rooted it 5 days after i got it with Odin and everything seems to work smooth ever since.
My problem now started yesterday when i stupidly went to install the chainfire 3d plugin because i wanted to try my older games that worked better on my qualcomm desire HD that wouldn't work well on my note II and what happened next has left me with sorrows since yesterday evening.
My lovely Note won't boot up anymore. It always gets stuck on the samsung galaxy note II logo. I am on the stock samsung rom.
I have tried everything i could read online to get it working including entering clockworkmod recovery, wiping data, cache, daivik, factory reset, formating sd and external sd card and nothing seems to work.
I have even tried entering odin download mode and downloading a custom firmware to flash but it keeps saying ''downloading'' but never finishes.
I am helpless now and do not want the 619 EURO i paid for this phone to be a waste. I can't return it since it is already rooted and i cannot unroot it in it's current state.
Is there any way for me to copy over the stock rom zip file to the external sd and flash it from there? If yes, can anyone provide me with a stock rom zip file to flash as i cant seem to find it anywhere?
My galaxy note II is the international version, bought at Saturn electronics shop, germany.
I will also admit that i am not so good with the technical stuff so a little explanation could help.
Thanks all.
There are stock roms in the note 2 forum here on XDA. You can boot into CWM recovery and mount your SD card to be able to use on your laptop/PC. If that fails, you can get the Android SDK specifically adb and push it to your internal SD.
I've done the same on my old Galaxy S2, so don't worry it's recoverable! I suggest getting a stock rom and flash via Odin, failing that use the method I mentioned above.
I apologise if I'm unclear, I'm exhausted tonight!
Sent from my Galaxy Note 2 through the Space Time Continuum
Best thing to try in ur case is make a full wipe and factory reset from recovery then to flash stock rom using odin then to make a wipe again if any problems,this should solve ur problem. Good luck.
↖(^▽^)↗ Sent From Rego Galaxy Note!! ↖(^▽^)↗
Thank you both a lot. I am trying your solutions now. I will post back if it worked.
You both are life savers. My phone is back up and running.
Can't thank you all enough.
Thanks.
Any luck with your Note II ?
You can also download a custom rom , then put it in an external card
Slot it in the phone , do full wipe and flash .
---------- Post added at 12:03 PM ---------- Previous post was at 12:00 PM ----------
freeway82 said:
You both are life savers. My phone is back up and running.
Can't thank you all enough.
Thanks.
Click to expand...
Click to collapse
Glad to hear the phone is alive.
freeway82 said:
You both are life savers. My phone is back up and running.
Can't thank you all enough.
Thanks.
Click to expand...
Click to collapse
Happy to hear that man, and welcome
↖(^▽^)↗ Sent From Rego Galaxy Note!! ↖(^▽^)↗
same problem after chainfire install
i have exactly the same problem as you. i rooted my phone and after installing chainfire from android market the phone does not get past the logo screen.hard reset,recovery nothing works. can you please tell me the method you used to recover the phone and maybe a link to the factory rom or files that i need to download. people say one has to flash the rom, but how exactly does one do that. big help please. my phone is from india.
rocky4 said:
i have exactly the same problem as you. i rooted my phone and after installing chainfire from android market the phone does not get past the logo screen.hard reset,recovery nothing works. can you please tell me the method you used to recover the phone and maybe a link to the factory rom or files that i need to download. people say one has to flash the rom, but how exactly does one do that. big help please. my phone is from india.
Click to expand...
Click to collapse
Hello, sorry for late reply. Here is the link you need
http://forum.xda-developers.com/showthread.php?t=1896696
Search for your country's version of the stock rom and download it.
Download also the odin files included in that first post.
Once you have the stock rom for your country and odin files downloaded, unrar them if they are zipped and place their folders on the desktop or somewhere else you can
easily find them.
Now open odin from the folder you unrared and turn off your phone (your phone shouldn't be connected to the computer at this point).
Once your phone is off. Press and hold simultaneously the volume down button, home key button and the power button. Keep holding them until you
see the samsung logo. Then let go of the buttons and your phone would enter downloading mode.
Now plug in your phone via usb to your computer and a blue light would show on odin with COM written in it.
Now check the box next to PDA and point odin to the tar file contained in the downloaded rom folder you placed on your desktop and hit start on odin.
A progress bar would now show on your phone indicating that odin is flashing your phone with the stock rom.
Once it's finished successfully, it will show on odin "passed" in a green light and your phone should reboot and voila, your phone is now clean as new.
From there, I believe you continue on your own. Now disconnect your pbone and enjoy.
There are also pictures on the link I posted that would explain the process better.
If you any further questions, just ask.
Good luck.
Thats why i love XDA community, if u care to share your knowledge to help others, they will for sure help another and the knowledge circle grows
↖(^▽^)↗ Sent From Rego Galaxy Note!! ↖(^▽^)↗
UNREAL. I did the exact same thing. Rooted...no prob. Chainfire3d plugin. Bricked.
I have the Sprint US version. Which ROM do I need?
Same issue
I have the Verizon I605 version, now I am stuck between the downloading, do not turn off target and the System software not authorized screens........Please help, also Im on a Macbook please include proper instructions for my idiotic turn of events.
freeway82 said:
Hello, sorry for late reply. Here is the link you need
http://forum.xda-developers.com/showthread.php?t=1896696
Search for your country's version of the stock rom and download it.
Download also the odin files included in that first post.
Once you have the stock rom for your country and odin files downloaded, unrar them if they are zipped and place their folders on the desktop or somewhere else you can
easily find them.
Now open odin from the folder you unrared and turn off your phone (your phone shouldn't be connected to the computer at this point).
Once your phone is off. Press and hold simultaneously the volume down button, home key button and the power button. Keep holding them until you
see the samsung logo. Then let go of the buttons and your phone would enter downloading mode.
Now plug in your phone via usb to your computer and a blue light would show on odin with COM written in it.
Now check the box next to PDA and point odin to the tar file contained in the downloaded rom folder you placed on your desktop and hit start on odin.
A progress bar would now show on your phone indicating that odin is flashing your phone with the stock rom.
Once it's finished successfully, it will show on odin "passed" in a green light and your phone should reboot and voila, your phone is now clean as new.
From there, I believe you continue on your own. Now disconnect your pbone and enjoy.
There are also pictures on the link I posted that would explain the process better.
If you any further questions, just ask.
Good luck.
Click to expand...
Click to collapse
What do you do if you can't get your computer to recognize your phone plugged in the USB? I tried to delete the Samsung Drivers and reinstall but it didn't work. I can get my phone to Odin mode but can not get it to flash.
PLEASE HELP.
Make sure you've installed Samsung usb drivers.
Edit: should have read your entire post *sorry* Make sure there are no other usb related proggies running; they might interfere with your sammie usb drivers..
Sent from my GT-N7100 using xda app-developers app
kustom1955 said:
What do you do if you can't get your computer to recognize your phone plugged in the USB? I tried to delete the Samsung Drivers and reinstall but it didn't work. I can get my phone to Odin mode but can not get it to flash.
PLEASE HELP.
Click to expand...
Click to collapse
-Don't use any extension cable to connect device, if any.
-Try other USB port (2.0)
-Close Firewall
-Close antivirus
-Kies shouldn't working in background
-Still no way then use different machine.
Help please!!!!
I have manged to soft brick my galaxy note 2 without any luck of reviving it through all the methods prescribed in this thread as well as the other countless threads !!
Can anybody please guide me where i am going wrong..
I can put the phone in download mode and using odin 1.85 or 3.04 manage to flash these stock roms but they all FAIL after modem.bin..
typically as soon as the Radio starts flashing it fails... I have downloaded these two files and i a tryng my luck with them...
I cannot enter into recovery mode to do a factory reset :crying:
The files i am using are as below :
1) N7100XXUFND3_N7100ODDFND2_N7100DDUFND1_HOME.tar.md5
2) N7100XXALIE_N7100ODDALI9_N7100DDALI9_HOME.tar.md5
Friends plese helpme out.. dont wanna turn this phone into a paper weight... '
Its the international GT N7100.. and think its a sudden death situation...
Hey all...and to answer the number one question, yes I did do A TON of searches already to find a solution...PLEASE HELP if you have the knowledge
Phone Model: Galaxy S III (SPH-L710) Sprint 16gb
Firmware/ROM: All stock and never tried ANY customization
Problem: I think the problem happened when the phone auto updated to 4.3. Now when the phone tries to boot it just boots to the second Samsung "Samsung Galaxy S III" screen, reboots and then will get to the same screen and just sits there. One time I even let it sit there for 30 minutes just to see if it needed the ridiculous amount of time. When I try to get the phone into recovery mode (Volume UP/Home key/then the Power key) it will boot and on the first Samsung "Samsung" screen, in the top left corner in small print, it shows "booting recovery...". Then it will just go strait to the second Samsung screen then keeps rebooting twice before it will just stop on the second Samsung screen again. When I try to get the phone into ODIN mode (Volume DOWN/Home key/then the Power key) it will boot asking me if I'm sure and to press Volume UP to continue. Once I press Volume UP, to continue, I get to ODIN mode. In the top left corner it shows...
ODIN MODE
Product Name: SPH-710
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
(all grayed out) Qualcomm Secureboot: ENABLE
Then in the middle of the screen is the little Android guy. Below that it shows, "Downloading..." "Do not turn off target!!". And it just sits there doing nothing else.
I'm pretty sure I have done everything I could possible do to get it working again. From what I understand there may be other things I can do. Worse case scenario, if I must, I would be willing to loose everything on the phone and start over from scratch, if that's even possible.
There has to be some VERY smart people on here that can help me. This is my wife's phone and we don't have an upgrade until May...PLEASE HELP. Thanks all!!!
Okay 1st go to sammobile.com and download the firmware for d2att also you will need Odin I think it's 3.04. You can search odin on xda there are a few guides to use then put phone in download mode and use odin to flash the firmware, everything u need to follow is posted in sgsIII development forum
Sent from my SGH-I747M using Tapatalk
jimchee said:
Okay 1st go to sammobile.com and download the firmware for d2att also you will need Odin I think it's 3.04. You can search odin on xda there are a few guides to use then put phone in download mode and use odin to flash the firmware, everything u need to follow is posted in sgsIII development forum
Sent from my SGH-I747M using Tapatalk
Click to expand...
Click to collapse
I already downloaded latest versions of both. It states, from phone off and unplugged, start phone using ODIN/download route then immediately plug into PC then open ODIN and click the button....but I cant get that far because ODIN app on PC never recognizes the phone to be able to do so.
I'm now starting to get very discouraged because i'm seeing in some places that the device needs to be put into USB debugging mode. Please tell me this isn't true. Because there has never been any reason to put the phone into USB debug mode.
Can someone please confirm this. I'm really crossing my finger that there is a way to do this without needing to be in USB debug mode...PLS PLS PLS!!!
Thanks for your reply
http://forum.xda-developers.com/galaxy-s3-sprint/help
jimchee said:
Okay 1st go to sammobile.com and download the firmware for d2att also you will need Odin I think it's 3.04. You can search odin on xda there are a few guides to use then put phone in download mode and use odin to flash the firmware, everything u need to follow is posted in sgsIII development forum
Sent from my SGH-I747M using Tapatalk
Click to expand...
Click to collapse
He has the Sprint version, get the one for d2spr, correct?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
DirtTrash said:
I already downloaded latest versions of both. It states, from phone off and unplugged, start phone using ODIN/download route then immediately plug into PC then open ODIN and click the button....but I cant get that far because ODIN app on PC never recognizes the phone to be able to do so.
I'm now starting to get very discouraged because i'm seeing in some places that the device needs to be put into USB debugging mode. Please tell me this isn't true. Because there has never been any reason to put the phone into USB debug mode.
Can someone please confirm this. I'm really crossing my finger that there is a way to do this without needing to be in USB debug mode...PLS PLS PLS!!!
Thanks for your reply
Click to expand...
Click to collapse
You have to plug the device in from download mode AFTER Odin is running. So, phone in download mode, start Odin, then plug in. Before you go that far are you letting go of the buttons when trying to get to recovery as soon as you seen 'recovery starting' in the top left corner or are you still holding them? If you do not let go the device will continue to attempt a normal boot. If you can get into recovery and do a factory restore it very well may solve your boot issue.