Bootloader says:
***UNLOCKED***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-0.95.0000
CPLD-None
MICROP-None
RADIO-1.1204.105.15
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure Boot: enabled
MODEM PATH: OFF
Phone was rooted with CWM, wanted to flash the Revolution HD 10,
got boot loop.
Tryied to flash the .img again, used the wipe script again,
reinstalled Revolution for several times with differnet settings,
still doesnt work.
So what to do about this?
Is there a way to solve this?
And if not, I did a CMW Backup
before I flashed the Revolution ROM,
can I just use the backup again or
do a Factory reset to make it work again?
Thank you guys, sorry to open a new thread,
but I really need my phone today.
Greetings!
You need to update your hboot before flashing the Jelly Bean sense roms and it's not possible for all phones, try this tool and get 11.1 while you're at it.
http://forum.xda-developers.com/showthread.php?t=1924003
Related
I cannot Install any Non-Sense roms on my HTC One X, I honestly forgot which procedure I used to root and unlock my phone but I remember a message similar to "After this, you will not be able to install any non-sense roms". At the time i did not know the difference between a sense and non-sense rom so i did not care for that message, but I was able to root and workaround phones, now when I install any Non-Sense rom I get stuck at loop boot, tried 3 different non-sense roms.
What is the procedure to unroot the phone and restart allover again to be able to install any rom I want? Sense/No-Sense?
Thank you.
Here is the info:
Unlocked
Endeavoru PVT Ship S-ON RL
HBOOT-1.31.0000
CPLD-None
MICROP-None
RADIO-5.1204.162.29
eMMC-bootmode: disabled
CPU-bootmode : disabled
HW Secure boot : Enabled
Modem Path : Off
Oct 18 2012, 20:49:20
You have an updated hboot version, abd it is not possible to downgrade it.
You can, however use a modded boot image to install non sense roms.
(at least on cm10)
And you wont be able to use gps.
Sent from my HTC One X
Hello.
I have received a new HTC One X today. I want to install android revolution HD (jellybean) however it states my CID has to be a specific one. However when i check it says None when i check via CMD and when im in recovery it says CID-11111111. Before i unlocked the bootloader it already said the CID-11111111. I have also been able to install CWM recovery. Below is further information.
endeavoru pvt ship s-OFF RL
CID-11111111
HBOOT-0.94.0000
CPLD-None
MICROp-None
RADIO1.1204.104.14
eMMc-bootmode: disabled
CPU-bootmode: disabled
HW secure boot: enabled (was originally disabled)
Any help or advice for flashing android revolution 18.1 would be much appreciated.
Thanks!
EDIT: Android_Revolution_HD-One_X_9.8 Installs perfectly fine. However i would prefer Android_Revolution_HD-One_X_18.1 (jellybean). But due to having superCID im a little confused on which hboot i should install. Any help anyone?
With your cid(super cid) you can install any rom...but you need update Hboot to flash jellybean . Use any firmware from any cid to update Hboot to 3.xx .
Sent from my GT-N7000 using xda app-developers app
Thanks for the reply.
That's what i thought. However when ever i flash anything other than ICS within CWR i get error status 7. Also error on verification. Then it checks my CID and errors. I used an official OTA update: OTA_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27-2.17.401.2_release_298985n1wwcwzs385c0bvz. That's what i used.
Then i tried installing via pc. It also failed during the installation. Same as above really.
Am i doing something wrong?. Has anyone got any ideas?
Thanks.
Another note: Even with the stock rom that was on the phone. When i try and update via stock rom it fails for the same reasons as above. says my CID is wrong. Even though i haven't changed it etc. It was CID:11111111 out of the box. I somehow don't think it is true CID:11111111 if it keeps failing on installs. The only thing it doesn't fail on is Android revolution HD ICS (9.8). I need some serious help please
FINAL EDIT. Everything is sorted. I had to change my CID because i couldn't do ANYTHING, even though it stated i had 11111111... Mods please close and delete this thread.
Hi all,
Here is my problem:
I'm trying to reinitialize my phone as to send it to HTC (I'm having a battery drain issue and my phone doesn't charge more than +5% per hour), but I'm now stuck and really don't know what to do.
What I did :
1. I flashed the original recovery over my CWM
2. Relocked the bootloader
3. Tried to flash a RUU and this is where I got stuck
My CID is VODA203 I thus launched RUU_ENDEAVOR_U_ICS_40_Vodafone_FR_1.26.163.2_Radio_1.1204.90.13_release_251225_signed.exe
But it says that I'm not using the right RUU
Here are the information I have right now :
*** RELOCKED ***
ENDEAVORU PVT SHIP S-ON RL
HBOTT-1.36.0000
CPLD-None
MICROP-None
Radio-5.1204.164D.30
eMMC-bootmode: disabled
CPU-Bootmode: disabled
HW secure boot: enabled
I desperately tried to flash again CWM recovery to flash my backup, tried to fastboot oem unlock, launch the original recovery I now have on my phone, but everything failed.
I'd be very grateful if someone could provide me some help.
Thanks in advance
Ok problem fixed, I found back my unlock_code I flashed CWM and I'm now restoring my backup, going back to point 0.
Now I'd still like to revert my phone to it's original firmware and I don't understand why RUU didn't work, any idea ?
The ruu is for a lower hboot. And we can't downgrade because of the s-on devices we have !
I successfully flashed CM 10.1.2. (JB 4.2.2) through CWM Recovery (v5.8.4.0) a few days ago on my One X. Everything was running smooth as a butter until i saw the 4.2.2 update for my One X... Then I decided that I will go back to stock, so I could update to 4.2.2 and enjoy Sense 5, but that's where my mistake was ;x. I started by flashing the stock recovery, then relocking the bootloader and trying to find a RUU that would be good for me. Then I found out that my firmware version was 3.20.401.1 and there is not a RUU for that version yet since it was released these days.. After that things went in a wrong direction as i flashed CWM Recovery v5.8.4.0 back and started to wipe the data,cache,Dalvik and stuff.. After i wiped those and tried to install CM 10.1.2 again i saw that my SD card was empty...I realized that the zip with the rom is gone.. so I ended up with no ROM. The CWM Rec remained, though, but I cant do nothing right now. When i turn on the phone, I get into bootloader and the only thing I could do from there is to get to CWM. My backup with cm is also gone.. so I am in a bootloop of which I can't get out ! The worst thing about the whole situation is that even my PC can't recognize the phone, as it says that Windows can't find a driver for it.. I have tried many drivers, including ADB universal driver,HTC Sync Manager, HTC Driver Installer and so on..
Here's the info from my bootloader screen:
***UNLOCKED***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.39.0000
CPLD-None
MICROP-None
RADIO-5.1204.162A.29
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH : OFF
Dec 17 2012, 13:59:37
Thanks in advance !
Hello guys everytime i try to install a custom rom but got stuck in boot. I tried ARDH first and I did everything correct but I got stuck then I tried ViperX with doin everything correct but got stuck again. I used CWM recovery, flashed boot.img, wiped, erased cache again and again but nothing changed. I was using custom rom but wasn't installed by me. I tried installing custom rom but I got stuck in boot long time ago and I gave to fixer and he installed leedroid, now i tried again and stuck.
Here's my info:
***UNLOCKED***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.12.0000
CPLD-None
MICROP-None
RADIO-1.1204.105.14
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
Jun 28 2012,11:31:28
and my CID is HTC_044
Please help me, I don't know what can I do :crying:
Update the hboot !