Develop Bugs

[Q] Boot loop with Revolution HD 10 ROM

Bootloader says:
***UNLOCKED***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-0.95.0000
CPLD-None
MICROP-None
RADIO-1.1204.105.15
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure Boot: enabled
MODEM PATH: OFF
Phone was rooted with CWM, wanted to flash the Revolution HD 10,
got boot loop.
Tryied to flash the .img again, used the wipe script again,
reinstalled Revolution for several times with differnet settings,
still doesnt work.
So what to do about this?
Is there a way to solve this?
And if not, I did a CMW Backup
before I flashed the Revolution ROM,
can I just use the backup again or
do a Factory reset to make it work again?
Thank you guys, sorry to open a new thread,
but I really need my phone today.
Greetings!

You need to update your hboot before flashing the Jelly Bean sense roms and it's not possible for all phones, try this tool and get 11.1 while you're at it.
http://forum.xda-developers.com/showthread.php?t=1924003

[Q] [HELP] Stuck in fastboot mode

Hi all,
Here is my problem:
I'm trying to reinitialize my phone as to send it to HTC (I'm having a battery drain issue and my phone doesn't charge more than +5% per hour), but I'm now stuck and really don't know what to do.
What I did :
1. I flashed the original recovery over my CWM
2. Relocked the bootloader
3. Tried to flash a RUU and this is where I got stuck
My CID is VODA203 I thus launched RUU_ENDEAVOR_U_ICS_40_Vodafone_FR_1.26.163.2_Radio_1.1204.90.13_release_251225_signed.exe
But it says that I'm not using the right RUU
Here are the information I have right now :
*** RELOCKED ***
ENDEAVORU PVT SHIP S-ON RL
HBOTT-1.36.0000
CPLD-None
MICROP-None
Radio-5.1204.164D.30
eMMC-bootmode: disabled
CPU-Bootmode: disabled
HW secure boot: enabled
I desperately tried to flash again CWM recovery to flash my backup, tried to fastboot oem unlock, launch the original recovery I now have on my phone, but everything failed.
I'd be very grateful if someone could provide me some help.
Thanks in advance

Ok problem fixed, I found back my unlock_code I flashed CWM and I'm now restoring my backup, going back to point 0.
Now I'd still like to revert my phone to it's original firmware and I don't understand why RUU didn't work, any idea ?

The ruu is for a lower hboot. And we can't downgrade because of the s-on devices we have !

[Q] [q] htc one x bootloop ! Need help

I successfully flashed CM 10.1.2. (JB 4.2.2) through CWM Recovery (v5.8.4.0) a few days ago on my One X. Everything was running smooth as a butter until i saw the 4.2.2 update for my One X... Then I decided that I will go back to stock, so I could update to 4.2.2 and enjoy Sense 5, but that's where my mistake was ;x. I started by flashing the stock recovery, then relocking the bootloader and trying to find a RUU that would be good for me. Then I found out that my firmware version was 3.20.401.1 and there is not a RUU for that version yet since it was released these days.. After that things went in a wrong direction as i flashed CWM Recovery v5.8.4.0 back and started to wipe the data,cache,Dalvik and stuff.. After i wiped those and tried to install CM 10.1.2 again i saw that my SD card was empty...I realized that the zip with the rom is gone.. so I ended up with no ROM. The CWM Rec remained, though, but I cant do nothing right now. When i turn on the phone, I get into bootloader and the only thing I could do from there is to get to CWM. My backup with cm is also gone.. so I am in a bootloop of which I can't get out ! The worst thing about the whole situation is that even my PC can't recognize the phone, as it says that Windows can't find a driver for it.. I have tried many drivers, including ADB universal driver,HTC Sync Manager, HTC Driver Installer and so on..
Here's the info from my bootloader screen:
***UNLOCKED***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.39.0000
CPLD-None
MICROP-None
RADIO-5.1204.162A.29
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH : OFF
Dec 17 2012, 13:59:37
Thanks in advance !

bootloader not updating

Help!
I OTA updated my wildfire s to 2.3.5 but hboot is still 0.90. I get errors on wifi and flickering UI. I tried RUU but it says succes but its like nothing happened
Ive been searching for 4 days but no luck

anyone? 60 views yet no reply? please help. Ive tried goldcard fastboot the boot, system, even revovery but I get remote signature verify fail
MARVEL PVT SHIP S-ON RL
HBOOT-0.90.0000
MICROP-0451
RADIO-7.46.35.00
Apr...

Need help, phone stuck after boot screen

Hello
Please can anyone help me
I recently try to flash a custom rom for my brothers One X but with no success
Flashing went fine but the phone never finish the boot
The only information i can give is only the one displayed on the fastboot.
Like this:
*** UNLOCKED ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-0.43.0000
CPLD-None
MICROP-None
RADIO-None
eMMC-bootmode:disabled
CPU-bootmode:disabled
HW Secure boot:enabled
MODEM PATH: OFF
Mar 17 2012,16:30:52
Can anyone please help me how can i boot this phone normally again
It doesn't matter if it was went back to stock again
If i can, i would love to do RUU for this phone but i can't find the right RUU
Big Thank's for pointing me to any clue

oh, one more post
it was rooted and got TWRP v2.6.3.0 installed
Thank you very much

Which ROM and version did you try to flash? Please provide a link to thread if possible. Another question in this context: is the HOX old or new layout and what layout is the ROM for, that you tried to flash?
I'm assuming that after flashing the ROM through TWRP you did wipe cache and flashed the boot.img using fastboot on cmd of your PC.
Greetings
Send by the swarm intelligence of my coffee machine (AKA HTC One M9).