Develop Bugs

[Q]Too many issues?

First of all I'm new to this forum so Hello! second of all I'm also new to rooting and custom ROM's.
So today after 3 days of trying to unlock my HTC One X by htcdev.com i finally submitted my identifier token and i got the Unlock_code.bin
I downloaded Android Revolution HD 18.1, I also downloaded the CWM v5.8.4.0 and installed it on my phone.
After that i followed the instructions on how to install the Revolution HD 18.1, after doing all the steps on my phone it told me it was succesfully installed and i had to reboot the system. So i did it, then the part comes where i'm getting stuck. It was rebooting my htc , and it wouldn't go further then the opening screen HTC quietly brilliant it was stuck there. trying to put my phone on and off and on and off, same problem. Now i can only go in the boot-loader menu and in recovery menu and that's it. I re-lock my phone again to update firmware. NOW I HAVE ONLY ACESS TO BOOT MENU AND BATTERY IS ALSO NOT CHARGING I PUT IT ON CHARGING FOR 5, 6 HOURS. WHEN EVER I TRY TOO UNLOCK BOOT LOADER IT SAYS BATTER LOW
I did a lot of research on how to fix my problem, unfortunately nothing helped. (Maybe cuz I'm a noob and new to this)
I tried almost every thing but nothing help
Can someone please help me with this, i've been trying it all day now and i'm giving up the hope.
Some information at the hboot menu of my HTC one X
SHIP S-ON RL
HBOOT-1.31
CPLD-None
MICROP-None
RADIO-2.1204.135.20
eMMC-bootmode: disabled
CPU-bootmode : disabled
1. How to charge my HOX battery as it remain low after long time charging and not allow me to do anything.
2. Before ARHD 18.1 i am running with rom skydragon. please help
Sorry about some information i post above my cell phone is hardly on for10 or 15 sec so i put some information as i remember now here is the exact information.
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.39.0000
CPLD-None
MICROP-None
RADIO-5.1204.162.29
eMMC-bootmode: disabled
CPU-bootmode : disabled
HW SECURE BOOT : ENABLE
MODE PATH : OFF
DEC 17 2012, 13:59:37
If any one from you guys help me will appreciate.
My phone is rooted but re lock. so i am not able to go in recovery mood. and phone directly go too fast boot mood.
Secondly it is not charging i put it on charging for long time the red led light is not stable and continue blinking. So i am not able to run any command as it say : Battery level is too low to flash. before flashing with ARHD 18.1 battery is normal. please help. I am so sick of any one come with good recommendation. Regards in advanced.

flash the boot.img witch came with your rom zip charge your battery in recovery
thanks if i helpped
too flash the boot img go to bootloader then fastboot
and put the boot.img from the rom zip to the fastboot folder and type
'fastboot flash boot boot.img'
then 'fastboot erase cache'
then it should work fine
thank me if i helped

How to charge in recovery
The5alodi said:
flash the boot.img witch came with your rom zip charge your battery in recovery
thanks if i helpped
too flash the boot img go to bootloader then fastboot
and put the boot.img from the rom zip to the fastboot folder and type
'fastboot flash boot boot.img'
then 'fastboot erase cache'
then it should work fine
thank me if i helped
Click to expand...
Click to collapse
Dear i put cell on charging for long time but when i switched it red line say fast mode low battery status. when ever i try to run any command it says. Failed.( remote battery low). my device is rooted but its relocked so i am not able to go in recovery.

http://forum.xda-developers.com/showthread.php?t=1609190
this will defiantly help

This'll help even more. It will reboot your phone over and over again and it will eventually charge.
http://forum.xda-developers.com/showthread.php?t=1658084&highlight=batch
Sent from my One X

Stiill not get it
The5alodi said:
http://forum.xda-developers.com/showthread.php?t=1609190
this will defiantly help
Click to expand...
Click to collapse
The psot is good but not work for me the main problem is still there: when ever i connect it to pc the cell phone remain on for 30 sec and then restart.I put it charge for long time but still it sucks. i try to unlock boot loader and image recovery the message display in cmd " remote device low battery". I attached the image please see.

syed124 said:
The psot is good but not work for me the main problem is still there: when ever i connect it to pc the cell phone remain on for 30 sec and then restart.I put it charge for long time but still it sucks. i try to unlock boot loader and image recovery the message display in cmd " remote device low battery". I attached the image please see.
Click to expand...
Click to collapse
leave it on the bootloader to charge

Leaving it in the bootloader will drain the phone, it does not charge there.
Use the bat script in the right way ? Place this
http://db.tt/aLqeTpPO
In the fastboot folder on the pc, put the phone in the bootloader/fastboot usb mode
Right click the .bat file and select it to run as administrator ! That's the only way to charge the batt up. Leave it for an hour and you should be able to unlock it and flash a custom recovery from where you can charge the up to more power

Thanks and whta next dear
TToivanen said:
This'll help even more. It will reboot your phone over and over again and it will eventually charge.
http://forum.xda-developers.com/showthread.php?t=1658084&highlight=batch
Sent from my One X
Click to expand...
Click to collapse
Thank u it's work for me i am in recovery mode and unlock as i indicated above the detail of my HOX. what should i do next i have ARHD18.1 zip and CWN super-su v0.87 zip on my sd. But why it stuck on quitely brilliant screen. detail is as follow
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.39.0000
CPLD-None
MICROP-None
RADIO-5.1204.162.29
eMMC-bootmode: disabled
CPU-bootmode : disabled
HW SECURE BOOT : ENABLE
MODE PATH : OFF
DEC 17 2012, 13:59:37

Don't touch the supersu.zip, it is unnecessary.
1. Wipe/factory reset
2. Flash the ARHD.zip
3. Flash the boot.img from the ARHD.zip "fastboot flash boot boot.img"

Yep the rom is pre rooted so you can skip that

TToivanen said:
Don't touch the supersu.zip, it is unnecessary.
1. Wipe/factory reset
2. Flash the ARHD.zip
3. Flash the boot.img from the ARHD.zip "fastboot flash boot boot.img"
Click to expand...
Click to collapse
Yesterday i do the same but i stuck on screen. please see the details above about h-boot an d radio. Should i need to install firmware and kindly will you be please specific. will be great full to you.

I am Confuse
Mr Hofs said:
Yep the rom is pre rooted so you can skip that
Click to expand...
Click to collapse
How to charge in recovery and secondly how to fast boot after flashing with ARHD confuse

You flashed cwm recovery 5.4.8.0 ? If you are in the recovery and you see the led burning is okey, of not leave the cable on the phone and on the pc and reboot the recovery
Like fastboot command but instead fastboot you type
Adb reboot recovery
It reboots the recovery and the led should go on !
And if you want to go to the bootloader from the recovery you type
Adb reboot bootloader

syed124 said:
Yesterday i do the same but i stuck on screen. please see the details above about h-boot an d radio. Should i need to install firmware and kindly will you be please specific. will be great full to you.
Click to expand...
Click to collapse
No need to flash firmware.
syed124 said:
How to charge in recovery and secondly how to fast boot after flashing with ARHD confuse
Click to expand...
Click to collapse
1. Download HTC drivers and install them. Choose one of the following 32 BIT 64 BIT
2. Download the attached fastboot files. Extract them to a folder on your PC where they are easily accessible.
3. Extract the boot.img from ARHD.zip to the folder too.
4. Hold SHIFT and click RIGHT mouse button anywhere in that folder. Select "open command prompt here".
5. Type
Code:
fastboot flash boot boot.img
and
Code:
fastboot erase cache

How to charge in recovery
TToivanen said:
No need to flash firmware.
1. Download HTC drivers and install them. Choose one of the following 32 BIT 64 BIT
2. Download the attached fastboot files. Extract them to a folder on your PC where they are easily accessible.
3. Extract the boot.img from ARHD.zip to the folder too.
4. Hold SHIFT and click RIGHT mouse button anywhere in that folder. Select "open command prompt here".
5. Type
Code:
fastboot flash boot boot.img
and
Code:
fastboot erase cache
Click to expand...
Click to collapse
sir actually i charge my battery to 3.68 to unlock the boot. my cell phone battery is still down. i wipe data and factory set. and flash with ARHD18.1 it,s complete and says fully done. but when i do the command as u mention above it's says remote battery low. my question is how i put my HOX in recovery charging that i can get cell charge to perform the above commands u said. remember i out my cell phone in batch command charging so right know it is 3580mv. kindly give me the procedure that i put cell in recovery charging and kindly tell me what happen when me flash battery status option in recovery.

Just boot to recovery and it should charge. The led will not light but it does charge.
You can use the batch script too if you want.
Sent from my One X

TToivanen said:
Just boot to recovery and it should charge. The led will not light but it does charge.
You can use the batch script too if you want.
Sent from my One X
Click to expand...
Click to collapse
Last night i boot into recovery and put my cell phone on charge but it's not charge battery is as usuall low. i am running with clockwork mood recovery v5.8.2.7. In reccovery it remain own for some time than powerd off but not charging.

syed124 said:
Last night i boot into recovery and put my cell phone on charge but it's not charge battery is as usual low. i am running with clockwork mood recovery v5.8.2.7. In recovery it remain own for some time than powered off but not charging.
Click to expand...
Click to collapse
I get it i am running lin low recovery 5.8.2.7. can you tell me how much battery is require to run cwm 5.8.4. and how to charge my HoX to get the battery of desired level please help. i am trying it from 4 days and i am getting sick. i am really sick. headache and running in fever. so please can you guide me will be really really grateful to you.

use this batch
http://db.tt/aLqeTpPO
Place it in the fastboot folder and put the phone in fastboot usb mode and then run the .bat file.
It will continuously reboot the phone and charge it little by littl, leave it like that for an hour or so and then flash this recovery
http://db.tt/Krlm4dPs
Sent from my HTC One X using xda premium

How i can install custom rooted rom

Hi.
I want the easiest way/procedure to install the latest custom rooted rom to this android phone.
If there is any android 4.x rom that i can install to this phone easy and without any problems please tell me the way.
A LOT OF THANKS FOR ALL YOUR TIME AND ANSWERS.

fits79 said:
Hi.
I want the easiest way/procedure to install the latest custom rooted rom to this android phone.
If there is any android 4.x rom that i can install to this phone easy and without any problems please tell me the way.
A LOT OF THANKS FOR ALL YOUR TIME AND ANSWERS.
Click to expand...
Click to collapse
first of all you need to root your phone.
you can find rooting guide in general as well as developement section.
then you need to install custom recovery.you can download rom manager from play store then from that app you can flash cwm recovery.
then download appropriate zip of rom which you want to download.
you want 4.0+ so here many ICS roms available(cm9) and also JB roms (cm10).
look at developement section and then download zip file of rom.
put it on sdcard
then go to recovery(remove battery then reinsert battery,hold volume down and power button)
you will see hboot menu,wait 2-3 seconds because it will scan PMG76IMG file.
then with volume button scroll it to recovery and then use power button to go to recovery.
then wipe data/factory reset
wipe cache
(do twice for sure)
go to advanced
wipe dalvick cache and battery stats
then install from zip
and select your rom zip file and install it.
now your done.new rom will installed then reboot system.

When i have press volume down+power
and choose recovery it bring me one photo with mobile and a red triangle with a ! insinde.
And stay at this screen forever....
the specs it show when i pres vol. down + power are:
MARVEL PVT SHIP S-ON RL
HBOOT-1.09.0099
MICROP-0451
RADIO-7.57.39.31
FEB 8 2912, 18:29:31
HBOOT
<VOL UP> TO PREVIEOUS ITEM
<VOL DOWN> TO NEXT ITEM
<POWER> TO SELECT ITEM
FASTBOOT -> GREEN COLOR
RECOVERY -> GREEN COLOR
FACTORY RESET -> RED COLOR
SIMLOCK -> BLUE COLOR
IMAGE CRC -> BLACK COLOR
can you find out anything for all that?

fits79 said:
When i have press volume down+power
and choose recovery it bring me one photo with mobile and a red triangle with a ! insinde.
And stay at this screen forever....
the specs it show when i pres vol. down + power are:
MARVEL PVT SHIP S-ON RL
HBOOT-1.09.0099
MICROP-0451
RADIO-7.57.39.31
FEB 8 2912, 18:29:31
HBOOT
<VOL UP> TO PREVIEOUS ITEM
<VOL DOWN> TO NEXT ITEM
<POWER> TO SELECT ITEM
FASTBOOT -> GREEN COLOR
RECOVERY -> GREEN COLOR
FACTORY RESET -> RED COLOR
SIMLOCK -> BLUE COLOR
IMAGE CRC -> BLACK COLOR
can you find out anything for all that?
Click to expand...
Click to collapse
you need to root your phone first.
your phone is 2012 model?
if you bought your phone in 2012 you might wont able to use other than stock sense roms.
here is tutorial for root and installing custom recovery.
http://forum.xda-developers.com/showthread.php?t=1997465
for wfs 2012 okay.

I don't understand where i must enter the command "fastboot flash recovery recovery.img" at pc or at phone and if it is as phone how i enter it?
I have already unlocked bootloader is that any matter?

fits79 said:
I don't understand where i must enter the command "fastboot flash recovery recovery.img" at pc or at phone and if it is as phone how i enter it?
I have already unlocked bootloader is that any matter?
Click to expand...
Click to collapse
You need to use the computer and then use command prompt
Sent from my Wildfire S A510e using xda premium

fits79 said:
I don't understand where i must enter the command "fastboot flash recovery recovery.img" at pc or at phone and if it is as phone how i enter it?
I have already unlocked bootloader is that any matter?
Click to expand...
Click to collapse
good if you unlocked bootloader.use htcsupertool to root your phone.
if your model 2012 then use guide which i mentioned.
that command needs cmd on computer

crossfire77 said:
you need to root your phone first.
your phone is 2012 model?
if you bought your phone in 2012 you might wont able to use other than stock sense roms.
here is tutorial for root and installing custom recovery.
http://forum.xda-developers.com/showthread.php?t=1997465
for wfs 2012 okay.
Click to expand...
Click to collapse
A 2012 model can have an jb or ics rom. Eoghan's kernel includes a patch for 2012 models. So you have to flash the rom and than eoghan's kernel. This should be working.

4ndaKava said:
A 2012 model can have an jb or ics rom. Eoghan's kernel includes a patch for 2012 models. So you have to flash the rom and than eoghan's kernel. This should be working.
Click to expand...
Click to collapse
great.thanks for info mate.

crossfire77 said:
good if you unlocked bootloader.use htcsupertool to root your phone.
if your model 2012 then use guide which i mentioned.
that command needs cmd on computer
Click to expand...
Click to collapse
Where i can find that and what exactly i must do?

fits79 said:
Where i can find that and what exactly i must do?
Click to expand...
Click to collapse
just root your phone.you need custom modded recovery which you can find in wildfire s general section under [guide]wfs 2012(i gave its link earlier)
then flash ICS or JB rom and flash kernel by eoghan.its in android dev section under second page i guess.
thread names as [kernels]cm7/cm9/cm10/paranoid 2.54

My friend for you that you are an advanced user is easy for me that i am NEWBIE it is not that easy.
Can you please tell me what i must do now that i have unlock bootloader as i tallied you before?
i have download everything you tallied me but I DON'T KNOW WHAT I MUST DO.
Now i can install anything from google play to the phone so can you tell me one EASY guide/steps to make it root as beginning and then install the latest jellybeam android release.
A LOT OF THANKS FOR ALL THAT HELPING ME OUT.

[tutorial]wildfire s 2012 [recovery+kernels+root]
fits79 said:
My friend for you that you are an advanced user is easy for me that i am NEWBIE it is not that easy.
Can you please tell me what i must do now that i have unlock bootloader as i tallied you before?
i have download everything you tallied me but I DON'T KNOW WHAT I MUST DO.
Now i can install anything from google play to the phone so can you tell me one EASY guide/steps to make it root as beginning and then install the latest jellybeam android release.
A LOT OF THANKS FOR ALL THAT HELPING ME OUT.
Click to expand...
Click to collapse
first go to this post and download 2012+cwm+recovery.zip file.
and also attached kernel you can see at end of post.
http://forum.xda-developers.com/showpost.php?p=37337141&postcount=33
then extract that 2012+cwm+recovery.zip to your main computer drive( e.g. C drive)
now open start menu and type cmd.
you will see command prompt.
now locate it to your c drive,
something you will see like this:
c:\user\name>
(name ll be your account name there)
so then type
Code:
cd..
you will see then c:\user>
again type
Code:
cd..
so now you will see like this:
c:\
then type
Code:
fastboot flash recovery recovery.img
then you can see custom recovery will install in your phone.
then you need to download root.zip i attached here and then flash it via recovery.(remove battery,hold power+volume down) select recovery now you can see recovery.then go to install from sdcard and select root.zip it ll root your phone.
now if you want to install ICS and JB roms you need to download these all roms and then immediately flash kernel from mentioned first post.
done you can use cm9/cm10 roms.
good luck.
NOTE: (Read first)
(you need to download htc sync for htc drivers because without htc drivers this fastboot not work.plug your device with your computer in fastboot mode.just with power +volume down button you can see first option fastboot so select it with power button.you can see in that option "fastboot usb" on upper side. and yeah download htc sync but when you do fastboot close htc synce from notification bar.we just need htc drivers so we download htc sync.)
for confirm that you device is connecting to computer type
Code:
adb devices
you can see now name of device like MB02393 something like that.if you cant see meaning you didnt installed drivers correctly.(when your phone is on and usb debugging is on,in fastboot mode this won't appear so dont worry)
if your motive is only use cm9/cm10 roms and nothing to do with stock rom then no need to flash root.zip just backup your stock rom .
recovery has backup option.
then do as in first mentioned link:
if you stuck anywhere like htc logo and all read each page of this thread might it ll help:
http://forum.xda-developers.com/showthread.php?t=1997465
&
stock kernel for wildfire s 2012 (245-825 MHz + ext2,3,4 support)
CM7 kernel for wildfire s 2012
CM9/CM10 kernel for wildfire s 2012
modded cwm recovery for wildfire s 2012
DISCLAIMER :When you turn on airplane mode and bluetooth leads to reboot the system. This is inherited from the original kernel. Currently colleagues seek a solution
CREDITS:
Epmak
eoghan2t7
alquez

All that i do it with mobile connected to pc and simply open at normal mode(and after the connection of usb what i choose?) or at recovery mode to wich mode?
You mean that file "2012+CWM+Recovery+5.0.2.8."
And after unrar
i press cmd
and then cd\2012 CWM Recovery 5.0.2.8
AND THEN THE COMMAND
fastboot flash recovery recovery.img
Finally get it.
It want "HTCDriver3.0.0.007" to see the mobile

fits79 said:
All that i do it with mobile connected to pc and simply open at normal mode(and after the connection of usb what i choose?) or at recovery mode to wich mode?
You mean that file "2012+CWM+Recovery+5.0.2.8."
And after unrar
i press cmd
and then cd\2012 CWM Recovery 5.0.2.8
AND THEN THE COMMAND
fastboot flash recovery recovery.img
Finally get it.
It want "HTCDriver3.0.0.007" to see the mobile
Click to expand...
Click to collapse
yup you have to unrar and put files in C drive or you can also make any folder but then you have to navigate to that folder with commands i mentioned in previous post.
and yeah after navigate to C:>
type
Code:
adb devices
if you can see your device you are going correct.

crossfire77 said:
first go to this post and download 2012+cwm+recovery.zip file.
and also attached kernel you can see at end of post.
http://forum.xda-developers.com/showpost.php?p=37337141&postcount=33
then extract that 2012+cwm+recovery.zip to your main computer drive( e.g. C drive)
now open start menu and type cmd.
you will see command prompt.
now locate it to your c drive,
something you will see like this:
c:\user\name>
(name ll be your account name there)
so then type
Code:
cd..
you will see then c:\user>
again type
Code:
cd..
so now you will see like this:
c:\
then type
Code:
fastboot flash recovery recovery.img
then you can see custom recovery will install in your phone.
then you need to download root.zip i attached here and then flash it via recovery.(remove battery,hold power+volume down) select recovery now you can see recovery.then go to install from sdcard and select root.zip it ll root your phone.
now if you want to install ICS and JB roms you need to download these all roms and then immediately flash kernel from mentioned first post.
done you can use cm9/cm10 roms.
good luck.
NOTE: (Read first)
(you need to download htc sync for htc drivers because without htc drivers this fastboot not work.plug your device with your computer in fastboot mode.just with power +volume down button you can see first option fastboot so select it with power button.you can see in that option "fastboot usb" on upper side. and yeah download htc sync but when you do fastboot close htc synce from notification bar.we just need htc drivers so we download htc sync.)
for confirm that you device is connecting to computer type
Code:
adb devices
you can see now name of device like MB02393 something like that.if you cant see meaning you didnt installed drivers correctly.(when your phone is on and usb debugging is on,in fastboot mode this won't appear so dont worry)
if your motive is only use cm9/cm10 roms and nothing to do with stock rom then no need to flash root.zip just backup your stock rom .
recovery has backup option.
then do as in first mentioned link:
if you stuck anywhere like htc logo and all read each page of this thread might it ll help:
http://forum.xda-developers.com/showthread.php?t=1997465
&
stock kernel for wildfire s 2012 (245-825 MHz + ext2,3,4 support)
CM7 kernel for wildfire s 2012
CM9/CM10 kernel for wildfire s 2012
modded cwm recovery for wildfire s 2012
DISCLAIMER :When you turn on airplane mode and bluetooth leads to reboot the system. This is inherited from the original kernel. Currently colleagues seek a solution
CREDITS:
Epmak
eoghan2t7
alquez
Click to expand...
Click to collapse
Hi , i tried the above method...but still HTC WILDFIRE S A150e recovery not working....

sakthi1086 said:
Hi , i tried the above method...but still HTC WILDFIRE S A150e recovery not working....
Click to expand...
Click to collapse
thats strange..you install recovery correctly?
because its confirmly working.here about three people tried it with no problems.

[Q] HELP HELP Upgrading hboot gone bad

Hi Everyone,
I was trying to install the vemon viper x 3.3.6 (Im kind of new to flashing rom onto phones) onto my htc one x and had to update my hboot from 0.98 to 1.31 which i did with JBW tool and worked perfect and i unlocked my bootloader again but wen i was finished unlocking my bootloader i accendently factory reset my phone so it removed the vemon viper x 3.3.6 zip folder off my phone and cant run my old rom which is the vemon viper x 2.7 as it isnt a jellybean rom. So when i start my phone it loads the rom but doesn't boot. All i can get into is my hboot. My htc one x is s-on as well. Please any help would be great.

Flash a recovery, mount usb storage, copy rom to phone and flash it.

TToivanen said:
Flash a recovery, mount usb storage, copy rom to phone and flash it.
Click to expand...
Click to collapse
I flashed clockworkmod recovery onto my phone but i cant get into my phone to use the usb storage option to copy the rom onto my phone.

enter the bootloader by pressing volume - and the power button together as long as you are in the bootloader, do not let go before that.....then navigate to HBOOT - RECOVERY. it boots to recovery and activate the mount as mass storage device in the mounts and storage section (if you have CWM) if you get an error by doing that i suggest you flash the latest CWM recovery 5.8.4.0 first. older ones dont have this option !

Mr Hofs said:
enter the bootloader by pressing volume - and the power button together as long as you are in the bootloader, do not let go before that.....then navigate to HBOOT - RECOVERY. it boots to recovery and activate the mount as mass storage device in the mounts and storage section (if you have CWM) if you get an error by doing that i suggest you flash the latest CWM recovery 5.8.4.0 first. older ones dont have this option !
Click to expand...
Click to collapse
I will giv it a go, thanks for your help

rwhelan said:
I will giv it a go, thanks for your help[/QUO[/I]
I have noticed when it loads hboot it says my usb master mode cannot be accessed and asks to remove my usb cable, what does that mean??? I installed the vemon viper x rom through recovery on my fone but it keeps bring up the hboot when i turn on my fone it does booth into my fone at all and my recovery doesnt appear when i go into it just goes black booths back into my hboot. does anyone know whats going on and what should i do ( i am a bit of a noob when it comes to these things)????
Click to expand...
Click to collapse

rwhelan said:
rwhelan said:
I will giv it a go, thanks for your help[/QUO[/I]
I have noticed when it loads hboot it says my usb master mode cannot be accessed and asks to remove my usb cable, what does that mean??? I installed the vemon viper x rom through recovery on my fone but it keeps bring up the hboot when i turn on my fone it does booth into my fone at all and my recovery doesnt appear when i go into it just goes black booths back into my hboot. does anyone know whats going on and what should i do ( i am a bit of a noob when it comes to these things)????
Click to expand...
Click to collapse
That notification is normal, we all have that due to the usb cable being connected !
Did you install the rom with the cable connected ? That's a no go......always install a rom without the usb connected ! First put the phone into the bootloader, hold power and volume - until you are in. Then the fastboot command
Fastboot erase cache
From this point you disconnect the cable. enter the recovery and re-install the viper rom again.
You did flash the boot.img from the rom right ?
Click to expand...
Click to collapse

Mr Hofs said:
rwhelan said:
That notification is normal, we all have that due to the usb cable being connected !
Did you install the rom with the cable connected ? That's a no go......always install a rom without the usb connected ! First put the phone into the bootloader, hold power and volume - until you are in. Then the fastboot command
Fastboot erase cache
From this point you disconnect the cable. enter the recovery and re-install the viper rom again.
You did flash the boot.img from the rom right ?
Click to expand...
Click to collapse
It couldn't fastboot the boot.img file so decided to install it from recovery i see now that was a bit of a mistake. I will " fastboot erase cache" and fastboot the boot.img. Hope for the best
Click to expand...
Click to collapse

You need to flash the boot.img file just like a recovery . Boot.img file in the fastboot folder
In the command window
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Then unhook the cable
Enter recovery and install the rom. And for the kernel question you answer with option 1.viper x delivered !

Mr Hofs said:
You need to flash the boot.img file just like a recovery . Boot.img file in the fastboot folder
In the command window
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Then unhook the cable
Enter recovery and install the rom. And for the kernel question you answer with option 1.viper x delivered !
Click to expand...
Click to collapse
I have one last big problem, my phone is on a boot loop after trying to install my rom from recovery and the battery is too low so it wont allow me to flash anything onto my phone. What can i do???

can you still enter the recovery ? if so....put the phone in the recovery and put it on the wallcharger, then you select 1 time REBOOT RECOVERY and let it sit there. it will charge up !

Mr Hofs said:
can you still enter the recovery ? if so....put the phone in the recovery and put it on the wallcharger, then you select 1 time REBOOT RECOVERY and let it sit there. it will charge up ![/QUI
I cant get into the recovery. Is there anything i can do??
Click to expand...
Click to collapse

Yes put the phone in the bootloader and put this script in the fastboot folder. Open a command window there and type
Batt script.bat
http://db.tt/aLqeTpPO
It will continuesly reboot the bootloader and charge the phone little by little ! Until you got some power and can acces the custom recovery to charge it more !
If it does not work, remove the space in batt script.bat so it says battscript.bat .....

Mr Hofs said:
Yes put the phone in the bootloader and put this script in the fastboot folder. Open a command window there and type
Batt script.bat
http://db.tt/aLqeTpPO
It will continuesly reboot the bootloader and charge the phone little by little ! Until you got some power and can acces the custom recovery to charge it more !
If it does not work, remove the space in batt script.bat so it says battscript.bat .....
Click to expand...
Click to collapse
I am going to sound very stupid. Could you give me the exact line of command to use if the fastboot folder is saved in the local storage on the computer (c: drive), i dont want to do more damage then i have.:silly:

Example when the fastboot files are in
C:\fastboot\the fastboot files
Then you copy that battscript into that folder
Then you navigate to that folder and hold down shift and right click the mouse inside that folder, then choose "open command prompt here"
In that command prompt you type
Battscript.bat (hit enter)
And the phone should start rebooting.
If the fastboot folder is somewhere else you repeat my steps only change folder that i used.....

Mr Hofs said:
Example when the fastboot files are in
C:\fastboot\the fastboot files
Then you copy that battscript into that folder
Then you navigate to that folder and hold down shift and right click the mouse inside that folder, then choose "open command prompt here"
In that command prompt you type
Battscript.bat (hit enter)
And the phone should start rebooting.
If the fastboot folder is somewhere else you repeat my steps only change folder that i used.....
Click to expand...
Click to collapse
The file worked perfectly just opened it in the fastboot files and left it run all night. Then fastboot erase cache and the recovery is back up and running just have to flash the boot.img and phone up and running. Thanks for your help.

No problem. Glad its sorted !

[Q] HTC One X (HELP)

Please Help,
I think my cousin has bricked my phone, I have tried everything and the phone will die soon as it wont switch offf.
Basically my phone has rooted and also the bootscreen unlocked, now my cousin didn't make a backup of my initial stock rom. so I am kinda stuck.
When I put the phone into boot via Power Button and Down Volume its comes to the white boot screen. When I Fastboot USB mode it says "SD Checking, Failed to open usb master", so how can i put this stock rom I found if my pc can't even detect the phone storage.
When I also go into my ClockworkRecovery and go into Mounts and Storage Menu > Mount USB storage, I get "unable to ums lunfile (no usch file or........ I thought maybe I could get the pc to recognize the phone sotrage via that way so I can put a ROM on the phone.
Phone has no ROM on it atm, I am slowly giving up.

update to the latest cwm or twrp then try again
---------- Post added at 03:34 AM ---------- Previous post was at 03:24 AM ----------
oh and and usb master mode thing is because you have the cable plugged in when starting bootloader. pull usb cable out before starting bootloader and plug it back in when it loads

How do I update the CWM with no OS installed

Divincus said:
How do I update the CWM with no OS installed
Click to expand...
Click to collapse
I think it is beyond being fixed my friend, when I power up the phone without the cable then I put it in once is have pressed the power key for the fastboot, the phone is still not detected. when the cable is plugged in on the fastboot it shows "fastboot USB" so it must be doing something?
Is there anyway someone would be really kind and use a voip and direct me or is the phone just totally dead now?

Ok, you can get into bootloader so your phone is not bricked. You are rooted, correct ?
You have a fastboot folder on your PC with the necessary files in it ?

alextheg said:
Ok, you can get into bootloader so your phone is not bricked. You are rooted, correct ?
You have a fastboot folder on your PC with the necessary files in it ?
Click to expand...
Click to collapse
Here is whats on the screen 1st.
ENDEAVORU PVT SHIP S-ON RL
HBOOT - 1.39.0000
CPLD-None
MICROP-None
RADIO-5. 1204 .164. 38H
Emmc bootmode: Disabled
Cpu bootmode Disabled
HW Secure boot: Enabled
Modem Path OFF
FASTBOOT
REBOOT
REBOOT BOOT LOADER
POWER DOWN
Yes I made one on my desktop with all the adb files ect from the SDK download.
Yes getting in the HBOOT is no problem at all, thats when if the usb cable is plugged in it says failed to open master used.
So I press the power to select FASTBOOT and insert the usb it then changes at the top FASTBOOT USB?
Is that a good sign

Divincus said:
Here is whats on the screen 1st.
ENDEAVORU PVT SHIP S-ON RL
HBOOT - 1.39.0000
CPLD-None
MICROP-None
RADIO-5. 1204 .164. 38H
Emmc bootmode: Disabled
Cpu bootmode Disabled
HW Secure boot: Enabled
Modem Path OFF
FASTBOOT
REBOOT
REBOOT BOOT LOADER
POWER DOWN
Yes I made one on my desktop with all the adb files ect from the SDK download.
Yes getting in the HBOOT is no problem at all, thats when if the usb cable is plugged in it says failed to open master used.
So I press the power to select FASTBOOT and insert the usb it then changes at the top FASTBOOT USB?
Is that a good sign
Click to expand...
Click to collapse
yes that is good, and from "fastboot usb" is where you install a newer cwm. get it from here>>>>>http://forum.xda-developers.com/showthread.php?t=2240646 rename the file "recovery" and put it in your fastboot folder, then install it by typing in command window "fastboot flash recovery recovery.img" then install your rom or stock nandroid that I linked for you earlier

same problem
Hi I have HTC ONE X after custom rom has lost imei number, bootloader relocked, android probably deleted and can't connect like normal with Laptop "UNKNOWN DEVICE" becouse all identification numers are 0, USB MASS Storage unavailable
Any ideas for bring him back?

Make sure you are in the "fastboot" folder that is on your desktop. In other words, the fastboot folder window is highlighted.
Hold the "shift" key on your keyboard and at the same time right click on empty space in the fastboot folder. Now you will get a menu, click on "Open command prompt here".
You should now have a fastboot terminal window and you can send commands to your phone using fastboot.
As "nogotaclue", said download ClockworkMod Recovery from Here . Put the downloaded recovery image in your fastboot folder. I would rename the downloaded recovery to "recovery_cwm". I do this because I find it easier to distinguish between recoveries that way.
Now go into your fastboot terminal window and type " fastboot flash recovery recovery_cwm.img " without the quote marks and then hit "enter".
Once you get a message saying that it succeeded type
" fastboot erase cache " hit "enter"
Now power off your phone reboot into bootloader and select recovery. If all is well you will be looking at Clockwork mod recovery 5.8.4.0.
Now you just need to get a ROM or a nandroid backup and you should be good to go....

nogotaclue said:
yes that is good, and from "fastboot usb" is where you install a newer cwm. get it from here>>>>>http://forum.xda-developers.com/showthread.php?t=2240646 rename the file "recovery" and put it in your fastboot folder, then install it by typing in command window "fastboot flash recovery recovery.img" then install your rom or stock nandroid that I linked for you earlier
Click to expand...
Click to collapse
I'll try that when I tried to adb devices it would not detect my phone at all, so I should download a new cwm go into the fast boot folder, do the cmd and point it to the cwm image?

MGOneX said:
Hi I have HTC ONE X after custom rom has lost imei number, bootloader relocked, android probably deleted and can't connect like normal with Laptop "UNKNOWN DEVICE" becouse all identification numers are 0, USB MASS Storage unavailable
Any ideas for bring him back?
Click to expand...
Click to collapse
Hold power and volume down button, keep holding them until bootloader screen appears.
Connect to your pc via fastboot usb.
Flash custom recovery
Flash Boot image for the rom you want
Erase cache
Install rom via recovery

Divincus said:
I'll try that when I tried to adb devices it would not detect my phone at all, so I should download a new cwm go into the fast boot folder, do the cmd and point it to the cwm image?
Click to expand...
Click to collapse
Correct, also make sure you have the latest drivers for your device. Or install HTC sync
Sent from my HTC One X using XDA Premium 4 mobile app

alextheg said:
Make sure you are in the "fastboot" folder that is on your desktop. In other words, the fastboot folder window is highlighted.
Hold the "shift" key on your keyboard and at the same time right click on empty space in the fastboot folder. Now you will get a menu, click on "Open command prompt here".
You should now have a fastboot terminal window and you can send commands to your phone using fastboot.
As "nogotaclue", said download ClockworkMod Recovery from Here . Put the downloaded recovery image in your fastboot folder. I would rename the downloaded recovery to "recovery_cwm". I do this because I find it easier to distinguish between recoveries that way.
Now go into your fastboot terminal window and type " fastboot flash recovery recovery_cwm.img " without the quote marks and then hit "enter".
Once you get a message saying that it succeeded type
" fastboot erase cache " hit "enter"
Now power off your phone reboot into bootloader and select recovery. If all is well you will be looking at Clockwork mod recovery 5.8.4.0.
Now you just need to get a ROM or a nandroid backup and you should be good to go....
Click to expand...
Click to collapse
How come then in the current CWM I have, I get the mesagunable to ums lunfile

I do not know why and I would not concern myself with it either.
As long as you can boot into recovery and mount usb storage then you can place a rom or a nandroid on your device and get up and running again.

alextheg said:
I do not know why and I would not concern myself with it either.
As long as you can boot into recovery and mount usb storage then you can place a rom or a nandroid on your device and get up and running again.
Click to expand...
Click to collapse
Well I can enter the boot screen so thats a sign I guess, I am just waiting to charge the phone a little then do the process
So I'll recap what I have to do
1.)Hold Power Button + Bottom volume controller
2).Enters the BOOTSCREEN
3.)Scroll to FASTBOOT and press the power button on the FASTBOOT then (FASTBOOT USB) should appear
4.)Navigate to my C:\Users\Jon\Desktop\fastboot folder where fastboot.exe is and the recovery_cwm.img is
5.)Shift + Right Click open command prompt here blah blah
6.)In the CMD window type "fastboot flash recovery recovery_cwm.img"
7.)If succeeded, then the following "fastboot erase cache" hit enter power off phone.
8.)BOOTLOADER, recovery and CWM should be there.
I have a HTC One X Integra H3G before all this I was on the 4.1.0 version of the HTC, is there a link of H3G roms

Divincus said:
Well I can enter the boot screen so thats a sign I guess, I am just waiting to charge the phone a little then do the process
So I'll recap what I have to do
1.)Hold Power Button + Bottom volume controller
2).Enters the BOOTSCREEN
3.)Scroll to FASTBOOT and press the power button on the FASTBOOT then (FASTBOOT USB) should appear
4.)Navigate to my C:\Users\Jon\Desktop\fastboot folder where fastboot.exe is and the recovery_cwm.img is
5.)Shift + Right Click open command prompt here blah blah
6.)In the CMD window type "fastboot flash recovery recovery_cwm.img"
7.)If succeeded, then the following "fastboot erase cache" hit enter power off phone.
8.)BOOTLOADER, recovery and CWM should be there.
I have a HTC One X Integra H3G before all this I was on the 4.1.0 version of the HTC, is there a link of H3G roms
Click to expand...
Click to collapse
You are pretty much there. When you have confirmed that you can reboot into recovery, power off and then reboot into bootloader / fastboot usb and from the fastboot terminal window type " fastboot getvar main".
Also type "fastboot oem readcid"
Post the result of those commands please

alextheg said:
You are pretty much there. When you have confirmed that you can reboot into recovery, power off and then reboot into bootloader / fastboot usb and from the fastboot terminal window type " fastboot getvar main".
Post the result of that command please
Click to expand...
Click to collapse
All the processes worked upto the point where you told me to "fastboot getvar main"

Divincus said:
All the processes worked upto the point where you told me to "fastboot getvar main"
Click to expand...
Click to collapse
Did you power off the device and restart it in fastboot usb ?

Divincus said:
All the processes worked upto the point where you told me to "fastboot getvar main"
Click to expand...
Click to collapse
I am H3G_01 but as I said, getva is a unknown command, least we are getting somewhere and I really appreciate your help.

Divincus said:
I am H3G_01 but as I said, getva is a unknown command, least we are getting somewhere and I really appreciate your help.
Click to expand...
Click to collapse
You are most welcome.
In fastboot terminal type "fastboot getvar all" and post screen please

[Q] Can't Get Passed Boot Logo - Please help

Thank you for taking time to read this!
I have a htc one x international version, i successfully unlocked the bootloader installed clockwormod recovery v5.8.4.0 and rooted the phone installing superSU without any problems.
I have been using some mod rom for a long time, And recently updated BUSYBOX, and then turned off phone. Now and now i cant get passed the htc boot screen, i have tried deleting cache, loading a previous restore img from 6 months ago, rebooting bootloader but none of that worked, here are the details from the boot screen:
p.s if you can get me into the phone, would be a life saver! or stock android 4.x that would be an added "Brucey" bonus.
Thank you again for your time, best regards
Ernest
ENDEAVORU PUT SHIP S-ON RL
HBOOT-0.95.0000
CPLD-None
MICROP-None
RADIO-1.1204.105.14
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
Modem Path: Off
May 8 2012 21:32:10
HBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
SHOW BARCODE
IMAGE CRC

Erniemac said:
Thank you for taking time to read this!
I have a htc one x international version, i successfully unlocked the bootloader installed clockwormod recovery v5.8.4.0 and rooted the phone installing superSU without any problems.
I have been using some mod rom for a long time, And recently updated BUSYBOX, and then turned off phone. Now and now i cant get passed the htc boot screen, i have tried deleting cache, loading a previous restore img from 6 months ago, rebooting bootloader but none of that worked, here are the details from the boot screen:
p.s if you can get me into the phone, would be a life saver! or stock android 4.x that would be an added "Brucey" bonus.
Thank you again for your time, best regards
Ernest
ENDEAVORU PUT SHIP S-ON RL
HBOOT-0.95.0000
CPLD-None
MICROP-None
RADIO-1.1204.105.14
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
Modem Path: Off
May 8 2012 21:32:10
HBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
SHOW BARCODE
IMAGE CRC
Click to expand...
Click to collapse
try fastboot erase cache:good:

rudresh128631 said:
try fastboot erase cache:good:
Click to expand...
Click to collapse
Hi there!
I went into Fastboot, and only have:
HBOOT
REBOOT
REBOOT BOOTLOADER
POWER DOWN
so i went back into HBOOT
RECOVERY
-Wipe Cache Partition
I have previously also tried fixing user permissions and wipe dalvik cache.
Still no joy I can mount the SD Card so my stuff is still there, i have backed up my photos and whatsapp as I'd like to keep the chat msgs haha.
Do you have any other ideas rudresh?
Thanks

To install a new rom i suggest to update the hboot. It's to low for current developed roms/mods.
Post the outcome of
Fastboot getvar version-main
Get you back to stock and update the phone. Then re-root or install a custom rooted rom

Mr Hofs said:
To install a new rom i suggest to update the hboot. It's to low for current developed roms/mods.
Post the outcome of
Fastboot getvar version-main
Get you back to stock and update the phone. Then re-root or install a custom rooted rom
Click to expand...
Click to collapse
atm i dont have fastboot getvar version-main, will this option become available once i have updated HBOOT?
many thanks for answering my noobie questions!

It's a command via fastboot. You put the phone in the bootloader where you see FASTBOOT USB in red when you connect the phone to the pc. Then open a command prompt on the pc from the fastboot folder and type in that command.

Download HTC one x fastboot tools. Install htc drivers. Open fast boot tool folder. Hold shift button and right click then chose open in command window from dropdown list. Boot your device into boot loader. Connect your device. Select fastboot in device. Then it should turn fastboot to fastboot usb highlighted in red color. In command prompt type fastboot devices. If your devices serial number appeared in command window then your device is connected. Type fastboot erase cache. After erasing cache reboot.
Sent from my HTC One X using xda premium

rudresh128631 said:
Download HTC one x fastboot tools. Install htc drivers. Open fast boot tool folder. Hold shift button and right click then chose open in command window from dropdown list. Boot your device into boot loader. Connect your device. Select fastboot in device. Then it should turn fastboot to fastboot usb highlighted in red color. In command prompt type fastboot devices. If your devices serial number appeared in command window then your device is connected. Type fastboot erase cache. After erasing cache reboot.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Not gonna work.....

Mr Hofs said:
It's a command via fastboot. You put the phone in the bootloader where you see FASTBOOT USB in red when you connect the phone to the pc. Then open a command prompt on the pc from the fastboot folder and type in that command.
Click to expand...
Click to collapse
Hi Mr Hofs!
THanks for your advice, I have fastboot working now at home. I tried fastboot erase cache just in case it worked. Then did your command
Code:
C:\Android\android-sdk\platform-tools>Fastboot getvar version-main
version-main: 1.29.401.11
finished. total time: 0.085s

Okay, make a copy of the sdcard to the pc just in case. Then download this ruu
http://www.androidruu.com/getdownlo...Radio_2.1204.127.19_release_271851_signed.exe
Relock the bootloader :
Fastboot oem lock
Then keep the phone in the bootloader and execute the ruu with admins rights. Right click the ruu.exe and choose
Run as administrator
It flashes the phone to stock. Boot it up after that and go to settings-about-software update and check for ota ..... Do this after every ota you get until you get no notifications anymore. Report back with issues or when you have updated the phone multiple times.

Mr Hofs said:
Okay, make a copy of the sdcard to the pc just in case. Then download this ruu
http://www.androidruu.com/getdownlo...Radio_2.1204.127.19_release_271851_signed.exe
Relock the bootloader :
Fastboot oem lock
Then keep the phone in the bootloader and execute the ruu with admins rights. Right click the ruu.exe and choose
Run as administrator
It flashes the phone to stock. Boot it up after that and go to settings-about-software update and check for ota ..... Do this after every ota you get until you get no notifications anymore. Report back with issues or when you have updated the phone multiple times.
Click to expand...
Click to collapse
Wow your fast! i just figured out what your trying to get me to do, and found the RUU page haha. Thank you so much for your time. BRB in 20 mins or so!

Mr Hofs said:
Okay, make a copy of the sdcard to the pc just in case. Then download this ruu
http://www.androidruu.com/getdownlo...Radio_2.1204.127.19_release_271851_signed.exe
Relock the bootloader :
Fastboot oem lock
Then keep the phone in the bootloader and execute the ruu with admins rights. Right click the ruu.exe and choose
Run as administrator
It flashes the phone to stock. Boot it up after that and go to settings-about-software update and check for ota ..... Do this after every ota you get until you get no notifications anymore. Report back with issues or when you have updated the phone multiple times.
Click to expand...
Click to collapse
OK IM IN!!!!!!!!! Android 4.03 but im not getting any OTA updates, maybe because Im abroad currently? ill dig around for some updates.
Thanks so much, ill drop you a lil tip once i get paid before Chinese New Year

Then download this one and run it too
http://www.persianhtc.net/index.php...Radio_2.1204.135.20_release_274900_signed.exe
And if you don't get ota after that one you can continue to install this one
http://www.androidruu.com/getdownlo...Radio_5.1204.162.29_release_302015_signed.exe
And then there must be ota available

Mr Hofs said:
Then download this one and run it too
http://www.persianhtc.net/index.php...Radio_2.1204.135.20_release_274900_signed.exe
And if you don't get ota after that one you can continue to install this one
http://www.androidruu.com/getdownlo...Radio_5.1204.162.29_release_302015_signed.exe
And then there must be ota available
Click to expand...
Click to collapse
First one was perfect getting updates galore!
Quick question: My old apps are still on the SD Card, so say i install Whatsapp / WeChat from the PlayStore, and move to SD Card will it link up the old data? or just overwrite the folder so Titanium back up is my best bet.
Just gonna finish them then i guess flash SUupdate.zip or whatever it is and i can use titanium back up to restore my apps.
Many thanks again
-E

Yeah via TB is a good option have fun