Develop Bugs

[Q] installing custom roms

hi...
can any1 tell me how to install custom roms using pc...........
i have searched the forum....but couldnt find any answer.................
sorry for starting a new thread........
thanks in advance

General Method:
- find, download and copy a flashable rom called "fullwipe 1.3" to the sd
- copy the zip with the rom you want to load in it to your sd card
- reboot into cwm recovery
- install zip from sd card
- choose the fullwipe 1.3 zip
- install
- then choose the rom's zip
- install
- reboot
wait for it to load. there you go.
For more advanced rom's, you must make directory's on your sd card for them to work properly. Follow instructions posted by the Rom's developer for proper installation.

thanks bro..........4 all ur help..............
1 more question........
what about using it through the fone......
i mean .....after downloading through the rom manager..........should i follow the same procedure ????

question
I rooted today, s-off & eng-off, installed rom manager
what do i have to do to get clockwork to work
I try booting into recovery but, display goes blank & has a red triangle symbol & after many minutes nothing happens..... can some inform me of the step I may have missed or something i can do to verify that i have the device set up properly.
Hopefully Thanks in advance.

gixer131 said:
question
I rooted today, s-off & eng-off, installed rom manager
what do i have to do to get clockwork to work
I try booting into recovery but, display goes blank & has a red triangle symbol & after many minutes nothing happens..... can some inform me of the step I may have missed or something i can do to verify that i have the device set up properly.
Hopefully Thanks in advance.
Click to expand...
Click to collapse
Flash CWM recovery from rom manager again.

Hawks556 said:
Flash CWM recovery from rom manager again.
Click to expand...
Click to collapse
I can appreciate that, but I need to know what to do. I try to do that & i get an error while attempting to run privileged commands. Flashing sounds all great but I cant seem to get it to do anything in recovery... error issues trying to do that, or anything else, I also have super user update issues that say they put a recovery image on the sd card & to go boot that from within recovery.
Just hoping to find out why i cant do the simple things everyone speaks of.

gixer131 said:
I can appreciate that, but I need to know what to do. I try to do that & i get an error while attempting to run privileged commands. Flashing sounds all great but I cant seem to get it to do anything in recovery... error issues trying to do that, or anything else, I also have super user update issues that say they put a recovery image on the sd card & to go boot that from within recovery.
Just hoping to find out why i cant do the simple things everyone speaks of.
Click to expand...
Click to collapse
Well if you can't flash recovery from Rom Manager then there's something wrong with your root privileges or s-offs... Just to make things clear, how did you try to flash the recovery?

AT THE TOP OF THE BOOTLOADER IT MUST SAY "... ENG S-OFF RL" FOR THIS TO WORK
With the device connected, boot into bootloader and select FASTBOOT and press power once.
It will now show FASTBOOT USB, and give you 4 options.
Download the newest 4.x.x.x version of the cwm recovery from the dev section.
Download My Toolkit and Extract to C:\
In the recovery zip that you downloaded from the dev thread, find the "recovery.img" and extract it to the RESOURCE folder of my toolkit. (make sure its only the recovery.img and not the folders it sits in)
open up a command prompt (windows key + R, type "cmd" and hit enter)
type in: cd "C:\HTC ACE TOOLKIT\RESOURCE" and hit enter.
the prompt should now be in that directory.
now type in the following EXACTLY and press enter afterwards:
fastboot flash recovery recovery.img
Let it flash, and badaboom, you have just flash cwm recovery.

JSLEnterprises said:
AT THE TOP OF THE BOOTLOADER IT MUST SAY "... ENG S-OFF RL" FOR THIS TO WORK
With the device connected, boot into bootloader and select FASTBOOT and press power once.
It will now show FASTBOOT USB, and give you 4 options.
Download the newest 4.x.x.x version of the cwm recovery from the dev section.
Download My Toolkit and Extract to C:\
In the recovery zip that you downloaded from the dev thread, find the "recovery.img" and extract it to the RESOURCE folder of my toolkit. (make sure its only the recovery.img and not the folders it sits in)
open up a command prompt (windows key + R, type "cmd" and hit enter)
type in: cd "C:\HTC ACE TOOLKIT\RESOURCE" and hit enter.
the prompt should now be in that directory.
now type in the following EXACTLY and press enter afterwards:
fastboot flash recovery recovery.img
Let it flash, and badaboom, you have just flash cwm recovery.
Click to expand...
Click to collapse
The BOOTLOADER SAYs "... ENG S-OFF but no RL @ the end
Can someone instruct me to what I may have done wrong? I know if I try to s-off or ENG-off I now get a connection problem but the first time I tried it seemed to work properly.
Thanks

Thanks for the help, I have successfuly flached clockwork now & a new rom.... What should I do to update a radio for my device on telus? Thanks

gixer131 said:
Thanks for the help, I have successfuly flached clockwork now & a new rom.... What should I do to update a radio for my device on telus? Thanks
Click to expand...
Click to collapse
well, in that toolkit i told you to download is a command script that does pretty much what I told you do to for the recovery.
Since you and I have the exact same phone I recommend grabbing the radio from the 2.52 korean build (Radio_12.59.60.26U_26.11.04.21_M), and the rill's as well.
Here is the radio and ril (first 2 links, download via the dropbox links): http://forum.xda-developers.com/showthread.php?t=996630
make sure you're in bootloader > fastboot and it says FASTBOOT USB on the screen
take a radio.img from within the zip and drop it into the resource folder and then run the shorcut in the toolkit.
It will now flash the radio to your phone and reboot.
Now with the rill's you flash via cwm recovery, from the RIL zip you downloaded, off your sd card in the same way you would flash a rom.

JSLEnterprises said:
well, in that toolkit i told you to download is a command script that does pretty much what I told you do to for the recovery.
Since you and I have the exact same phone I recommend grabbing the radio from the 2.52 korean build (Radio_12.59.60.26U_26.11.04.21_M), and the rill's as well.
Here is the radio and ril (first 2 links, download via the dropbox links): http://forum.xda-developers.com/showthread.php?t=996630
make sure you're in bootloader > fastboot and it says FASTBOOT USB on the screen
take a radio.img from within the zip and drop it into the resource folder and then run the shorcut in the toolkit.
It will now flash the radio to your phone and reboot.
Now with the rill's you flash via cwm recovery, from the RIL zip you downloaded, off your sd card in the same way you would flash a rom.
Click to expand...
Click to collapse
I would Like to thank you for your help & support, I was a the step of having fastboot usb And on my pc I unziped the radio And droped the image in the resource folder, a window pops up (disk burner) only option to choose is DVD R Drive.... do I have to have the SD card unmouted as a disk drive to the computer?

leave disk burner outta this. lol
The phone should be in bootloader under "fastboot" so the highlighted area will say FASTBOOT USB (since your phone is connected to your pc).
If radio.img is in the RESOURCE folder of my toolkit, go back to the main folder (HTC ACE TOOLKIT) and just double click the "Flash Radio" shorcut.

JSLEnterprises said:
leave disk burner outta this. lol
The phone should be in bootloader under "fastboot" so the highlighted area will say FASTBOOT USB (since your phone is connected to your pc).
If radio.img is in the RESOURCE folder of my toolkit, go back to the main folder (HTC ACE TOOLKIT) and just double click the "Flash Radio" shorcut.
Click to expand...
Click to collapse
Most excellent! Thanks & Thank you, your help has been most usefull & is quite appreciated!

Changed Rom
Changed rom last night & wanted to know weather I should flash the "rill's" & "radio" each time I change roms. I just did the radio now so hope that cures the tinny sound, also it sounded kinda tinny just playing music, is there a patch or something else to do or is all that fixed in the radio?
Any suggestion on roms to try? using Revolution HD right now.

[tutorial] How to Unlock Bootloader and Root your Htc One V

Here is a simple tutorial on how to unlock bootloader and root your Htc One V.
Do this AT YOUR OWN RISK and I don't guarantee it will work on all Htc One V (but successfully done on my Htc One V (PrimoU)).
First: Credits go to:
1) paulobrien for his tools & guide
2) bagofcrap24 for the stolen unlocking bootloader tutorial..
Second: It is good to have official RUU for your Htc One V version. You can find the official RUU HERE(credit : JMZ) & HTCSync in case you something goes wrong and you need to revive your One V.
Or make a nandroid backup after you successfully unlock the bootloader. How ? Read further below. So read fully before you attempt to unlock bootloader and rooting.
Third: the tutorial
Unlocking Your Bootloader
Note: After doing unlocking bootloader, all your data/apps are gone so make a backup to your PC first.
You will need to run the initial setup again.
1. Go Here "http://www.htcdev.com/" and create yourself an account on HTCDEV.
2. Download These Fastboot Files
3. Make a new folder on your C: drive called fastboot.
4. Extract The Zip downloaded in step 2 to the new folder
5. Go Here http://www.htcdev.com/bootloader/ and select "All Other Supported Models" and "then begin unlock bootloader"
6. Yes, Tick both Boxes, Proceed
7. Skip up to step 8 as we have all we need for the first 7 steps
8. Power off your phone by holding the power button down for 5-7 seconds (the three keys will flash a few times then it will power off)
9. Hold volume down button, the device will boot to HBOOT
10. Select Fastboot With Volume+or- then press Power once (you'll be in fastboot mode)
11. plug your phone into your PC and open a Command Prompt.
(windows XP - Click Start > Run > type CMD in box then press OK
(Windows 7 - Click Start > type CMD in search box then press Enter)
12. cd to your folder where we put fastboot files cd c:\fastboot
13. type this into your command prompt window fastboot oem get_identifier_token
14. select & copy the text as per step 9 on the HTCDev website
15. paste your identifier token into the box at the bottom and submit
You Will Very Shortly Receive an email from HTCDev with a link to the second part of the instructions and your "Unlock_code.bin" attached
16. download the "Unlock_code.bin" from the email and save it to the same folder that we extracted fastboot files to in step 2
17. type this into your command prompt window fastboot flash unlocktoken Unlock_code.bin
18. The Display Will change on your phone, press Vol + to accept and power to confirm.
Congratulations You Have Successfully Unlocked Your Bootloader
UPDATE: Read the IMPORTANT note added below
Rooting with Superboot for GSM Device (Primo U)
1. Download r1-primo-superboot.zip to your computer and extract in any directory.
2. Download the modded boot.superboot.img
3. Replace the boot.superboot.img in the folder that you extracted just now (r1-primo-superboot).
Or download one of the Superboot that relevant to your device HERE
4. Power off your phone by holding the power button down for 5-7 seconds (the three keys will flash a few times then it will power off)
5. Hold volume down button, the device will boot to HBOOT
6. Select Fastboot With Volume+or- then press Power once (you'll be in fastboot mode)
7. Connect your phone to PC
8. Double click ‘install-superboot-windows.bat’
Rooting with Superboot for CDMA Device (Primo C)
1. Download r1-primo-cdma-superboot.zip to your computer and extract in any directory.
2. Power off your phone by holding the power button down for 5-7 seconds (the three keys will flash a few times then it will power off)
3. Hold volume down button, the device will boot to HBOOT
4. Select Fastboot With Volume+or- then press Power once (you'll be in fastboot mode)
5. Connect your phone to PC
6. Double click ‘install-superboot-windows.bat’
Once it complete, the phone will reboot on its own. In app drawer you will see a SuperSU icon, click on it and update SU binary then you are done with rooting your Htc One V.
You can try any app with root access to confirm it is working.
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
IMPORTANT
As some people forget to make a nandroid backup for their stock ROM, after they successfully unlocked their device,
when a soft brick happens, it will be a big problem to be back on stock when they are unable to find the official RUU for their device.
So make sure, after successfully unlocked your device, don't do anything else yet, flash the CWM recovery and make a nandroid, make nandroid and nandroid of your stock ROM.
Download the Recovery for GSM Device:
CWM 5 - http://forum.xda-developers.com/showthread.php?p=28153112
Direct download link : http://download.clockworkmod.com/recoveries/recovery-clockwork-5.8.4.5-primou.img
CWM 6 - http://forum.xda-developers.com/showthread.php?t=1871243 (the latest version as at 05 Sep 2012)
Download the Recovery for CDMA Device:
CWM - http://forum.xda-developers.com/showthread.php?t=1749798
How to make a nandroid backup ?
Once the CWM recovery installed:
Press power once (to go to hboot)
press volume down/up to navigate the menu to RECOVERY, press POWER once
Once in the RECOVERY menu:
click backup and restore
click backup
the backup process is running. It will be a few minutes to complete.
once complete, check whether the backup is successful
click backup and restore
click restore
you will see your backup files, e.g: 2012-06-12.0.13.04
click Go Back or use the back button
click reboot system now to boot your device
once fully booted, mount your sdcard to PC, browse to \clockworkmod\backup and copy the 2012-06-12.0.13.04 folder to your PC as a second backup in case something is wrong with your sdcard.
2012-06-12.0.13.04 is an example only, you will get a different no.
Alternatively, you also can use TWRP recovery:
GSM version - http://forum.xda-developers.com/showthread.php?t=1721749
CDMA version - http://forum.xda-developers.com/showthread.php?t=1764183
Now you are ready to do the rooting process.
Once your device is rooted, you are free to do whatever you want to do with your device, to flash a custom ROM, a custom kernel... whatever.
If soft brick happens and there is no official RUU, a stock nandroid backup may helps you

It doesn't work !!!!
It stucks at -waiting for device- in
11. type this into your command prompt window fastboot oem get_identifier_token

It works perfectly when s off and root. But why cant i gain root access when i already have SU app?
I tried to update the SU but it failed on gaining root access and busybox list.
When i used root uninstaller app, it asked me for adb access which i dunno. What do i have to do?
Sent from my HTC One V using XDA

handisetyadi said:
It works perfectly when s off and root. But why cant i gain root access when i already have SU app?
I tried to update the SU but it failed on gaining root access and busybox list.
When i used root uninstaller app, it asked me for adb access which i dunno. What do i have to do?
Sent from my HTC One V using XDA
Click to expand...
Click to collapse
Which boot.superboot.img inside the r1-primo-superboot folder that you have ?
The original one is 4126 kb (SU not working)
The modded one is 4106 kb (SU should work)

Ohh, my bad. It's fully rooted now, thankksss.
And i was panic cz it cudnt turn on wifi. But once i reboot my one v it backs on
Sent from my HTC One V using XDA

You're in the wrong section dude!
better move to development ask the mod

Aarush said:
You're in the wrong section dude!
better move to development ask the mod
Click to expand...
Click to collapse
I don't see why rooting is a development issue. Development is for, well, software development like ROMs and recoveries, etc. Rooting is required to develop, but isn't development per-se.

I am planning on buying this phone.
I just have a few questions.
What is S-off and S-on?
Also, what is RUU?

nightshade246 said:
I am planning on buying this phone.
I just have a few questions.
What is S-off and S-on?
Also, what is RUU?
Click to expand...
Click to collapse
I just give a basic explanation:
S-Off - security off - you can change everything including hboot partition layout, radio, system, data & recovery
S-On - opposite of the above, all cannot be change (which normally with a locked bootloader)
S-On + unlocked bootloader - you can change only system, data & recovery
RUU - ROM Update Utility - and exe file which consist all the OS files to be installed to the phone.

ckpv5 said:
Here is a simple tutorial on how to unlock bootloader and root your Htc One V.
Do this AT YOUR OWN RISK and I don't guarantee it will work on all Htc One V (but successfully done on my Htc One V (base 1.58.707.3)).
Click to expand...
Click to collapse
My brand new android phone has never been rooted faster! thank you very much! let's start theming!!!

ckpv5 said:
I just give a basic explanation:
S-Off - security off - you can change everything including hboot partition layout, radio, system, data & recovery
S-On - opposite of the above, all cannot be change (which normally with a locked bootloader)
S-On + unlocked bootloader - you can change only system, data & recovery
RUU - ROM Update Utility - and exe file which consist all the OS files to be installed to the phone.
Click to expand...
Click to collapse
Thank you for your response.
How do you toggle S-On to S-off?
Why is it recommended to have the RUU you said one should have?

nightshade246 said:
How do you toggle S-On to S-off?
Click to expand...
Click to collapse
We have to wait until a developer finds an exploit.

To root, it is mandatory to have S-OFF?
Can I just make the root without the S-OFF?

Im here again:
How can I make S-OFF in my HTC One V, the HTCDev teaches seeks to remove the battery, but the HTC One V has internal battery (you can not remove)?
Someone who has made S-OFF on your HTC One V, could you help me?
(sorry my bad english, im speak portuguese only)...

oups... after playing with my phone, I have made bad mistakes!!!
- I have moved htc system apks for have more fluidity
- I have made a "restore factory settings" and now I have no launcher!!!
- I have tried to flash with "RUU_PRIMO_U_ICS_40A_HTC_Europe_1.41.401.1_Radio_20.62.30.0830U_3822.15.00.03_M_release_247272_signed.exe" but it doesn't work!
Someone could help me to have an original HTC One V?
Thanks!
edit: I kept these apks on my sdcard...

Thanks,my HTC One V now is rooted...
\O/

ZeuBug said:
oups... after playing with my phone, I have made bad mistakes!!!
- I have moved htc system apks for have more fluidity
- I have made a "restore factory settings" and now I have no launcher!!!
- I have tried to flash with "RUU_PRIMO_U_ICS_40A_HTC_Europe_1.41.401.1_Radio_20.62.30.0830U_3822.15.00.03_M_release_247272_signed.exe" but it doesn't work!
Someone could help me to have an original HTC One V?
Thanks!
edit: I kept these apks on my sdcard...
Click to expand...
Click to collapse
You cannot do restore factory settings when you moved some system apks out from nand.
In order to flash a RUU:
1) you need an official RUU for your device.
2) you have htc usb drivers installed on PC.
3) relock the bootloader
in fastboot mode type fastboot oem lock
4) flash RUU
Do you have some kind of note of your actual software version number ?

ckpv5 said:
You cannot do restore factory settings when you moved some system apks out from nand.
In order to flash a RUU:
1) you need an official RUU for your device.
2) you have htc usb drivers installed on PC.
3) relock the bootloader
in fastboot mode type fastboot oem lock
4) flash RUU
Do you have some kind of note of your actual software version number ?
Click to expand...
Click to collapse
Thanks ckpv5. Now I feel less alone
Here is the informations I have on HBOOT screen:
PRIMOV PVT SHIP S-ON RL
HBOOT-1.16.0000
RADIO-3831.15.00.19_M
eMMC-boot
My phone is a french retail version... I'm trying fastboot oem lock then "RUU_PRIMO_U_ICS_40A_HTC_Europe_1.41.401.1_Radio_20.62.30.0830U_3822.15.00.03_M_release_247272_signed.exe"
Edit: I have fastboot relocked but unable to flash with the rom above... I was something like "please update with the proper utility". When I try to flash I have "From Image version 1.56.401.1" "to Image version 1.41.401.1".
Maybe I have to push system files again with adb?

ZeuBug said:
Thanks ckpv5. Now I feel less alone
Here is the informations I have on HBOOT screen:
PRIMOV PVT SHIP S-ON RL
HBOOT-1.16.0000
RADIO-3831.15.00.19_M
eMMC-boot
My phone is a french retail version... I'm trying fastboot oem lock then "RUU_PRIMO_U_ICS_40A_HTC_Europe_1.41.401.1_Radio_20.62.30.0830U_3822.15.00.03_M_release_247272_signed.exe"
Edit: I have fastboot relocked but unable to flash with the rom above... I was something like "please update with the proper utility". When I try to flash I have "From Image version 1.56.401.1" "to Image version 1.41.401.1".
Click to expand...
Click to collapse
That is not the correct RUU for your phone.
You need this one:
http://www.filefactory.com/file/c42...31U_3831.15.00.19_M_release_251449_signed.exe

ZeuBug said:
Thanks ckpv5. Now I feel less alone
Here is the informations I have on HBOOT screen:
PRIMOV PVT SHIP S-ON RL
HBOOT-1.16.0000
RADIO-3831.15.00.19_M
eMMC-boot
My phone is a french retail version... I'm trying fastboot oem lock then "RUU_PRIMO_U_ICS_40A_HTC_Europe_1.41.401.1_Radio_20.62.30.0830U_3822.15.00.03_M_release_247272_signed.exe"
Edit: I have fastboot relocked but unable to flash with the rom above... I was something like "please update with the proper utility". When I try to flash I have "From Image version 1.56.401.1" "to Image version 1.41.401.1".
Maybe I have to push system files again with adb?
Click to expand...
Click to collapse
Find the ruu for Europe (1.56.401.1)
You cannot downgrade..
Sent from my HTC One V using XDA

Wildfire S black screen recovery 1.26.401.3 hboot 1.09.0099

Hi
I bought my wfs in poland (sorry for my english and mistakes). I have problem because I updated my phone to 2.26.401.3 in phone jumped message about new soft and I update. Now I unlocked bootloader with htcdev and when I go into recovery (cwm installed by rom manager) I have black screen and under screen leds are light. I tried this but this isn't working now i downgraded phone to 2.13.401.3 and recovery (cwm) still not working. I tried another recovery but no one working. I want install new rom. What do? Can I install custom rom without recovery? or any solutions of this problem?

I had very similar problems, and could not find any solution, so I created custom recovery.img with appropriate kernel. Download attached recovery.img and using fastboot burn it:
$ fastboot flash recovery recovery,img
Phone needs to be in "fastboot usb" mode. Let me know if you have problems with it. Works for me.

lanaczko said:
I had very similar problems, and could not find any solution, so I created custom recovery.img with appropriate kernel. Download attached recovery.img and using fastboot burn it:
$ fastboot flash recovery recovery,img
Phone needs to be in "fastboot usb" mode. Let me know if you have problems with it. Works for me.
Click to expand...
Click to collapse
Dint work for me dude. Recovery is still a blank screen.

rajanand made a thread about this last time look for it and it works

ngoralph said:
rajanand made a thread about this last time look for it and it works
Click to expand...
Click to collapse
Thankyou! Found his post. I shall give it a shot now. Cheers

it dint work for me .. do you know any other way to get rid of this black screen on recovery.. or atleast findout the reason behind such a thing.

[TUTORIAL] How to Install ClockworkMod Recovery on wildfire s
I Hope you have SDK tools for Android, Java runtime, and HTC Sync installed on your Windows PC. After unlocking the bootloader and rooted your device follow this:
(Note: You only need to install HTC Sync for the drivers that come with it. But the program sometimes causes conflicts, so during this procedure, make sure it is not running. Open Task Manager in Windows and kill it. If you don’t use HTC Sync, you may also open Control Panel and uninstall it without uninstalling the drivers.)
[OPTIONAL] Update Android software version to 2.3.5
If you have a Marvel/A510e, It is recommended updating to 2.3.5 before proceeding (if possible), though you can root a 2.3.3 device. If you decide to root 2.3.3 now and install 2.3.5 later, you’ll loose your root, cwm and have to do it again.
Make sure the phone is connected in Charge only mode. Enable USB debugging by going to Settings > Applications > Development > USB. Also Disable "Fast boot" by go to Settings>Power>uncheck "Fast boot".
1. Download the official 5.0.2.8 image at ClockworkMod’s index of recoveries here: http://www.clockworkmod.com/rommanager/
Make sure you choose the right one for your device whether Marvel or MarvelC. If you downloaded the zip version, extract the img file from the zip you just downloaded.
2. Boot the phone into HBOOT. After it scans for PG7610.zip, select 'FASTBOOT' and press the <Power> button then connect the USB cable. The word 'FASTBOOT' will change into 'FASTBOOT USB'. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
3. Open command prompt in Windows and navigate to the folder where you extracted the recovery image in step 1.
4. Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Try the above method, if it fails then go down:
It's a full version, so just download the .zip put it in sdcard then replace battery, press <power> with Vol Down.
http://forum.xda-developers.com/showthread.php?t=1213229
____________________________________________
Hope this may be useful. (If really, Just press 'Thanks').

http://forum.xda-developers.com/showthread.php?t=1781105 this will work i bet ya dont say thanks just click it

cant work for me dear senior
Senthamil said:
I Hope you have SDK tools for Android, Java runtime, and HTC Sync installed on your Windows PC. After unlocking the bootloader and rooted your device follow this:
(Note: You only need to install HTC Sync for the drivers that come with it. But the program sometimes causes conflicts, so during this procedure, make sure it is not running. Open Task Manager in Windows and kill it. If you don’t use HTC Sync, you may also open Control Panel and uninstall it without uninstalling the drivers.)
[OPTIONAL] Update Android software version to 2.3.5
If you have a Marvel/A510e, It is recommended updating to 2.3.5 before proceeding (if possible), though you can root a 2.3.3 device. If you decide to root 2.3.3 now and install 2.3.5 later, you’ll loose your root, cwm and have to do it again.
Make sure the phone is connected in Charge only mode. Enable USB debugging by going to Settings > Applications > Development > USB. Also Disable "Fast boot" by go to Settings>Power>uncheck "Fast boot".
1. Download the official 5.0.2.8 image at ClockworkMod’s index of recoveries here: http://www.clockworkmod.com/rommanager/
Make sure you choose the right one for your device whether Marvel or MarvelC. If you downloaded the zip version, extract the img file from the zip you just downloaded.
2. Boot the phone into HBOOT. After it scans for PG7610.zip, select 'FASTBOOT' and press the <Power> button then connect the USB cable. The word 'FASTBOOT' will change into 'FASTBOOT USB'. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
3. Open command prompt in Windows and navigate to the folder where you extracted the recovery image in step 1.
4. Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Try the above method, if it fails then go down:
It's a full version, so just download the .zip put it in sdcard then replace battery, press <power> with Vol Down.
http://forum.xda-developers.com/showthread.php?t=1213229
____________________________________________
Hope this may be useful. (If really, Just press 'Thanks').
Click to expand...
Click to collapse
cant work for me dear

i can't root my wildfire s ...

i have a marvel unlocked s on wildfire s.
i can't root my phone because when i go into the recovery mode, the black screen comes up with the 4 lighting keys. i don't know what to do. i read the related posts but nothing seems to help. could you guys please help.. i unlocked my phone for rooting and now i can't do anything.

You can root your phone by using the HTC super tool, just google for it.
I assume you have stock recovery on your phone, then you actually can't really use that recovery. You should try to root it with supertool
and then install CWM with ROM Manager
I hope this came in handy for you!
Sent from my VegaCream RC2 using xda premium

MrGuyFawkes said:
You can root your phone by using the HTC super tool, just google for it.
I assume you have stock recovery on your phone, then you actually can't really use that recovery. You should try to root it with supertool
and then install CWM with ROM Manager
I hope this came in handy for you!
Sent from my VegaCream RC2 using xda premium
Click to expand...
Click to collapse
i tried the supertool but it doesn't work. i tried everything even the clockworkmode recovery, the flashing of cwm works perfectly fine but the recovery mode doesn't show up so that i can install from sd card. only a black screen with key lighted comes up. i tried the things given in the black screen recovery article of xda .. but nothing seems to help. could you help me out to see through this. my moms htc wildfire s which is one year old works perfectly fine but the problem is with my new one.. i also heard that lot of people are experiencing the same.

After unlocking, you have to root the device first then install CWM and take a nandroid backup thru Recovery option.
For rooting you can also use root.zip method. just google it.
To flash CWM, goto Hboot menu and select fastboot, then goto cmd (command prompt) on pc try using fastboot commands to flash boot.img, system.img and recovery.img.
Hope this may be useful.....

Senthamil said:
After unlocking, you have to root the device first then install CWM and take a nandroid backup thru Recovery option.
For rooting you can also use root.zip method. just google it.
To flash CWM, goto Hboot menu and select fastboot, then goto cmd (command prompt) on pc try using fastboot commands to flash boot.img, system.img and recovery.img.
Hope this may be useful.....
Click to expand...
Click to collapse
bro,
i tried the root.zip method. i copied the zip file on the memory card and then went to hboot. but then i found the error which is : CID ERROR
PRESS POWER BUTTON TO REBOOT.
this is what i get.
i have a s-on unlocked marvel a510e. please help..

ok. now try this way! which helped me to solve the same issue.....
forum.xda-developers.com/showpost.php?p=21891784&postcount=1
hope this may be useful......(if really, press thanks).

Senthamil said:
ok. now try this way! which helped me to solve the same issue.....
forum.xda-developers.com/showpost.php?p=21891784&postcount=1
hope this may be useful......(if really, press thanks).
Click to expand...
Click to collapse
bro, this time i flashed the PG76IMG.zip files but when i go into the recovery to flash install from root.zip, the same black screen comes up. this is the problem which i have been having.. the black screen on recovery which makes us do nothing at all..

i think a new custom recovery has to be made for the htc wildfire s inorder to prevent the black screen on recovery. or does anyone know how to root wildfires without the need to go into any custom recovery mode. please help .. this has become a real problem.. i really wish there was a way.

aryan41 said:
bro, this time i flashed the PG76IMG.zip files but when i go into the recovery to flash install from root.zip, the same black screen comes up. this is the problem which i have been having.. the black screen on recovery which makes us do nothing at all..
Click to expand...
Click to collapse
Maybe you need to downgrade your stock ROM (if you still can boot it up so to say).
Look for a RUU for WFS and try to downgrade/upgrade HBOOT and such to an older/newer version.
Sorry that I can't post any links too RUUs, I'm on my phone.
But there is a tread with these in the Dev section I think, but if they don't work you can just google for them.
tbh I have a similar problem with my bro's WFS, I can't even unlock it because of wrong versions a such so I think your problem could be related to this.
Sent from my VegaCream RC2 using xda premium

Choose the right recovery image....
aryan41 said:
i think a new custom recovery has to be made for the htc wildfire s inorder to prevent the black screen on recovery. or does anyone know how to root wildfires without the need to go into any custom recovery mode. please help .. this has become a real problem.. i really wish there was a way.
Click to expand...
Click to collapse
I think you you've chosen the wrong cwm. Chose the right one here :
http://forum.xda-developers.com/showthread.php?t=1213229
download PG76IMG.zip and you need to install it using fastboot, it will not work using the zip file from your sd card. Make sure you delete that file before attempting what is below (adapted from CafeKampuchia's guide on rooting).
You will need SDK tools for Android, Java runtime, and HTC Sync installed on your Windows computer. Install the SDK tools in a directory named something like c:\android. Put the recovery image in this directory, too, not the zip file.
Boot the phone into HBOOT by turning the phone off, removing the battery, replacing the battery then holding down the power key and volume button. After it scans for PG7610.zip, select FASTBOOT and press the power button then connect the USB cable. The word FASTBOOT will change into FASTBOOT USB. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
Open a command prompt in Windows and navigate to c:\android
Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Hope this will install ClockworkMod recovery properly. (If really press 'thank').

Senthamil said:
I think you you've chosen the wrong cwm. Chose the right one here :
http://forum.xda-developers.com/showthread.php?t=1213229
download PG76IMG.zip and you need to install it using fastboot, it will not work using the zip file from your sd card. Make sure you delete that file before attempting what is below (adapted from CafeKampuchia's guide on rooting).
You will need SDK tools for Android, Java runtime, and HTC Sync installed on your Windows computer. Install the SDK tools in a directory named something like c:\android. Put the recovery image in this directory, too, not the zip file.
Boot the phone into HBOOT by turning the phone off, removing the battery, replacing the battery then holding down the power key and volume button. After it scans for PG7610.zip, select FASTBOOT and press the power button then connect the USB cable. The word FASTBOOT will change into FASTBOOT USB. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
Open a command prompt in Windows and navigate to c:\android
Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Hope this will install ClockworkMod recovery properly. (If really press 'thank').
Click to expand...
Click to collapse
i dont think that would work i've tried every recovery i've found here and still black screen you may want to downgrade your kernel after unlock of bootloader then use superoneclick. if not working look for my post before which uses taco root to root the device

Senthamil said:
I think you you've chosen the wrong cwm. Chose the right one here :
http://forum.xda-developers.com/showthread.php?t=1213229
download PG76IMG.zip and you need to install it using fastboot, it will not work using the zip file from your sd card. Make sure you delete that file before attempting what is below (adapted from CafeKampuchia's guide on rooting).
You will need SDK tools for Android, Java runtime, and HTC Sync installed on your Windows computer. Install the SDK tools in a directory named something like c:\android. Put the recovery image in this directory, too, not the zip file.
Boot the phone into HBOOT by turning the phone off, removing the battery, replacing the battery then holding down the power key and volume button. After it scans for PG7610.zip, select FASTBOOT and press the power button then connect the USB cable. The word FASTBOOT will change into FASTBOOT USB. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
Open a command prompt in Windows and navigate to c:\android
Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Hope this will install ClockworkMod recovery properly. (If really press 'thank').
Click to expand...
Click to collapse
first u need adb.exe, adbwinapi.dll, fastboot.exe in that c:\android\
u need a command in cmd to navigate. "cd c:\android"
yeah other than that its pretty complete. See the post he referring to. I remember using this post to root mine.
androidforums.com/wildfire-s-all-things-root/480954-guide-how-root-wildfire-s-s-finally.html

Try my all in one tool here: http://forum.xda-developers.com/showthread.php?t=1697985
It will work

Senthamil said:
I think you you've chosen the wrong cwm. Chose the right one here :
http://forum.xda-developers.com/showthread.php?t=1213229
download PG76IMG.zip and you need to install it using fastboot, it will not work using the zip file from your sd card. Make sure you delete that file before attempting what is below (adapted from CafeKampuchia's guide on rooting).
You will need SDK tools for Android, Java runtime, and HTC Sync installed on your Windows computer. Install the SDK tools in a directory named something like c:\android. Put the recovery image in this directory, too, not the zip file.
Boot the phone into HBOOT by turning the phone off, removing the battery, replacing the battery then holding down the power key and volume button. After it scans for PG7610.zip, select FASTBOOT and press the power button then connect the USB cable. The word FASTBOOT will change into FASTBOOT USB. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
Open a command prompt in Windows and navigate to c:\android
Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Hope this will install ClockworkMod recovery properly. (If really press 'thank').
Click to expand...
Click to collapse
i used the exact same version of clockworkmode recovery. the problem is not with the recovery i think its with my phone. and i tried downgrading the hboot using ruu but the problem still exists ... that is the black screen on recovery.

rezo609 said:
Try my all in one tool here: http://forum.xda-developers.com/showthread.php?t=1697985
It will work
Click to expand...
Click to collapse
bro, my wildfire s is the new one with the black screen on recovery problem, are u sure this utility will work the new phones also..?

rezo609 said:
Try my all in one tool here: http://forum.xda-developers.com/showthread.php?t=1697985
It will work
Click to expand...
Click to collapse
bro, i tried this but failed. i can't get the recovery screen where i have to select install from sd card. this is my problem .. i don't get the recovery screen instead i get a black screen.

Is your phone a marvelc ?

no it is marvel

i wish some one could come up with custom recovery which doesn't lead into this black recovery screen. please help.. isn't there any other way ?

please help rezo
rezo609 said:
Is your phone a marvelc ?
Click to expand...
Click to collapse
bro, isn't there any other way to root my wildfire s.. without ending up in the black recovery screen.. please help.. i am losing all hope..

[Q] One x NO ROM/ NO RECOVERY/ JUST FASTBOOT and NO RECHARGE

I flash new custom rom, but I clean all sd card.
My mobile restart only fastboot,
I can't do anything because my battery are low.
I've downloaded RUU and tried flash boot and image but appers a error: "remote: not allowed"
I'm using fastboot recharge all time.
* RUU_ENDEAVOR_U_ICS_40_S_HTC_ARA_2.17.415.2_Radio_2.1204.135.20_release_275980_signed
Follow my screen:
**** relocked ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.12.0000
CPLD-Nome
MICROP-Nome
RADIO-2.1204.135.20
eMMC-bootmode:disable
CPU-bootmode :disable
HW Secure boot :disable
MODEM PATH FF
Jun 28 2012,11:31:28
Fastboot USB
<VOL UP>
<VOL DOWN>
<POWER>
HBOOT
REBOOT
REBOOT BOOTLOADER
POWER DOWN.
sorry my bad english

Why do you clean your sd card?
From fastboot you can flash custom recovery, and then you can enter your custom recovery to mount the sd card..
from there, copy a custom rom on your choice and flash it..remember to flash the kernel too..
Good luck bro! :good:

I tried too
RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed.exe
RUU_ENDEAVOR_U_ICS_40_S_hTC_Asia_WWE_2.17.707.3_Radio_2.1204.135.20_release_278245_signed.exe
No efect. all gime a error.
Anybody??

Freddy1X said:
Why do you clean your sd card?
From fastboot you can flash custom recovery, and then you can enter your custom recovery to mount the sd card..
from there, copy a custom rom on your choice and flash it..remember to flash the kernel too..
Good luck bro! :good:
Click to expand...
Click to collapse
I already tried it and nothing

vitorhumel said:
I already tried it and nothing
Click to expand...
Click to collapse
When I try enter to recovery appears "this build is for development purposes only....bla bla" what should i do?"this build is for development purposes only....bla bla"
what should i do?

you must re-unlock your bootloader first with fastboot flash Unlock_code.bin
full instructions here http://www.htcdev.com/bootloader/unlock-instructions/page-4
then flash recovery

vitorhumel said:
I flash new custom rom, but I clean all sd card.
My mobile restart only fastboot,
I can't do anything because my battery are low.
I've downloaded RUU and tried flash boot and image but appers a error: "remote: not allowed"
I'm using fastboot recharge all time.
* RUU_ENDEAVOR_U_ICS_40_S_HTC_ARA_2.17.415.2_Radio_2.1204.135.20_release_275980_signed
Follow my screen:
**** relocked ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.12.0000
CPLD-Nome
MICROP-Nome
RADIO-2.1204.135.20
eMMC-bootmode:disable
CPU-bootmode :disable
HW Secure boot :disable
MODEM PATH FF
Jun 28 2012,11:31:28
Fastboot USB
<VOL UP>
<VOL DOWN>
<POWER>
HBOOT
REBOOT
REBOOT BOOTLOADER
POWER DOWN.
sorry my bad english
Click to expand...
Click to collapse
please follow these steps:
1- from the fastboot unplug ur phone then use vol- button to "Power Down" option then clock the power button
2- wait like 10 seconds or so then plug it to the wall charger, not the PC USB one, it'll charge, just be sure that it remains off and the red light is on for charging, redo the prev steps if it power itself on again
3- give it like half an hour just to be sure it has some battery to do the coming steps
4- power it on and from FASTBOOT USB then on the cmd of the fastboot folder write the following "fastboot flash unlocktoken Unlock_code.bin" just be sure that u have the "Unlock_code.bin" at the same fastboot folder
5- another screen will appear to your device asking if u wanna unlock your bootloader, click yes using vol+ then Power button
Now you have the boot loader unlocked
6- download the "custom recovery 5.8.4.2" and put it to the same fastboot folder
7- from the FASTBOOT USB use the cmd and write the following "fastboot flash recovery <the name of the downloaded recovery.img>" then hit Enter
8- from fastboot go to recovery
9- select mount and storage
10- select mount USB storage
11- plug your device to ur PC and wait till it appear as a flash drive
12- add your "CUSTOM rom" to your SD
13- unmount the device
14- from the recovery select "install from zip"
15- select your CUSTOM rom
16- wait till the installation completes
17- reboot
18-done
hope this will solve your problem
just hit thanks if it did

Hossam.Abdelsalam said:
please follow these steps:
1- from the fastboot unplug ur phone then use vol- button to "Power Down" option then clock the power button
2- wait like 10 seconds or so then plug it to the wall charger, not the PC USB one, it'll charge, just be sure that it remains off and the red light is on for charging, redo the prev steps if it power itself on again
3- give it like half an hour just to be sure it has some battery to do the coming steps
4- power it on and from FASTBOOT USB then on the cmd of the fastboot folder write the following "fastboot flash unlocktoken Unlock_code.bin" just be sure that u have the "Unlock_code.bin" at the same fastboot folder
5- another screen will appear to your device asking if u wanna unlock your bootloader, click yes using vol+ then Power button
Now you have the boot loader unlocked
6- download the "custom recovery 5.8.4.2" and put it to the same fastboot folder
7- from the FASTBOOT USB use the cmd and write the following "fastboot flash recovery <the name of the downloaded recovery.img>" then hit Enter
8- from fastboot go to recovery
9- select mount and storage
10- select mount USB storage
11- plug your device to ur PC and wait till it appear as a flash drive
12- add your "CUSTOM rom" to your SD
13- unmount the device
14- from the recovery select "install from zip"
15- select your CUSTOM rom
16- wait till the installation completes
17- reboot
18-done
hope this will solve your problem
just hit thanks if it did
Click to expand...
Click to collapse
Now I already installed the custom rom (ARHD 9.7.2). But when appears the wallpaper to start setting up, it restarts in boot loop.
I tried to restore using a backup and it didn't work. (old backup CWM 5.8.2.7) now I have CWM 5.8.4.0
What should I do?

vitorhumel said:
Now I already installed the custom rom (ARHD 9.7.2). But when appears the wallpaper to start setting up, it restarts in boot loop.
I tried to restore using a backup and it didn't work. (old backup CWM 5.8.2.7) now I have CWM 5.8.4.0
What should I do?
Click to expand...
Click to collapse
1- from the downloaded ARHD zip file extract the "boot.img"
2- put it to your fastboot folder
3- plug your device to the FASTBOOT USB
4- flash the boot.img "fastboot flash boot boot.img" then hit enter
5- then "fastboot erase cache" then hit enter again
6- then "fastboot reboot"
you are done

Hossam.Abdelsalam said:
1- from the downloaded ARHD zip file extract the "boot.img"
2- put it to your fastboot folder
3- plug your device to the FASTBOOT USB
4- flash the boot.img "fastboot flash boot boot.img" then hit enter
5- then "fastboot erase cache" then hit enter again
6- then "fastboot reboot"
you are done
Click to expand...
Click to collapse
Now everthing is ok. Thanks for all Everybody.

i do have similar problem but another system and country
Guys i do have the same problem but - here what is different:
***Unlocked***
Endeavoru PVT Ship S-On Rl
HBOOT-1.12.0000
CPLD-NONE
MICROP-NONE
RADIO- 1.1204.103.14h (it was different minute ago ?)
ennc0biitnide:dissabled
Cpu-bootmode: disabled
HW secureboot: enabled
Modem path : off
Jun 28 2012 11:31:28
Recovery i do have - CWM v.5.8.4.0
I did wipe data too by mistake... wrong button ;(
Problem is my phone is HTC ONE X - hutchinson 3g UK
when i used cmd.exe and Fastboot i have putet version-main: 2.17.771.3 -> and i can not get it anywhere on net.... i have downloaded those:
RUU_ENDEAVOR_U_ICS_40_S_HTC_ARA_2.17.415.2_Radio_2.1204.135.20_release_275980_signed
RUU_ENDEAVOR_U_ICS_40_H3G_UK_1.28.771.9_Radio_1.1204.103.14H_release_256494_signed
RUU_ENDEAVOR_U_ICS_40_H3G_UK_1.26.771.2_Radio_1.1204.90.13H_release_251403_signed
non above working with this phone its just saing FAILED. phone is charged.
Sorry for overtoping but please help me with that ... i have tryed from exacly 13 hours sitting ALL THE TIME AT FRONT OF MY PC trying to fix that stupid phone ;/ human error, 14 hours fail...
_______________
Ok now i manage to get to recovery mode - > mound sd card - copy rom - install it BUT !! ->>> phone is booting to wallpaper and lock screen and rebooting over and over after seeing "time and lock screen" ??????????? wtf?
_________________
YEEEEEEEEEEEEEEEEEES I have done it i promiss i will support xda with at least 500£ in next week <3
- i just checked last post again... :> love u

Hossam.Abdelsalam said:
please follow these steps:
1- from the fastboot unplug ur phone then use vol- button to "Power Down" option then clock the power button
2- wait like 10 seconds or so then plug it to the wall charger, not the PC USB one, it'll charge, just be sure that it remains off and the red light is on for charging, redo the prev steps if it power itself on again
3- give it like half an hour just to be sure it has some battery to do the coming steps
4- power it on and from FASTBOOT USB then on the cmd of the fastboot folder write the following "fastboot flash unlocktoken Unlock_code.bin" just be sure that u have the "Unlock_code.bin" at the same fastboot folder
5- another screen will appear to your device asking if u wanna unlock your bootloader, click yes using vol+ then Power button
Click to expand...
Click to collapse
First of all thank you Hossam.Abdelsalam for the instructions. However, screen on my HTC One X (TM UK) is not staying off if I connect wall charger (step 1 and 2). So, it is not charging battery. Any idea what can I do?

mhs409 said:
First of all thank you Hossam.Abdelsalam for the instructions. However, screen on my HTC One X (TM UK) is not staying off if I connect wall charger (step 1 and 2). So, it is not charging battery. Any idea what can I do?
Click to expand...
Click to collapse
Have a search for a bat file that lets you charge your phone in a reboot cycle, then you can go from there.

vitorhumel said:
Now everthing is ok. Thanks for all Everybody.
Click to expand...
Click to collapse
have the same problem..but remains at thc one beat audioi...bl blah start up..it's there athor possibilities to erase chache....i don';t kniw...from recovery mode.or something like that it's give me an error in cmd fastboot erase cache...errror

ciprian077 said:
have the same problem..but remains at thc one beat audioi...bl blah start up..it's there athor possibilities to erase chache....i don';t kniw...from recovery mode.or something like that it's give me an error in cmd fastboot erase cache...errror
Click to expand...
Click to collapse
What error?

BenPope said:
What error?
Click to expand...
Click to collapse
i've make'it...to fastboot erase cache...i;ve instaled the arhd...pff....all the thing step by step....but it's no passing for the thc one beats audio screen...what can i do???

ciprian077 said:
i've make'it...to fastboot erase cache...i;ve instaled the arhd...pff....all the thing step by step....but it's no passing for the thc one beats audio screen...what can i do???
Click to expand...
Click to collapse
Yeah, but what error? what does it say when you try to erase cache?
Please, slow down and tell us what you are trying to do and what you have already done.
Did you:
- unlock the phone with HTC Dev?
- flash Unlock_code.bin?
- install custom recovery?
- install custom rom?
- install the boot.img for the custom rom via fastboot?
We're here to help but we cant if your not telling us whats wrong

TheJoker79 said:
Yeah, but what error? what does it say when you try to erase cache?
Please, slow down and tell us what you are trying to do and what you have already done.
Did you:
- unlock the phone with HTC Dev?
- flash Unlock_code.bin?
- install custom recovery?
- install custom rom?
- install the boot.img for the custom rom via fastboot?
We're here to help but we cant if your not telling us whats wrong
Click to expand...
Click to collapse
after all that...scuse me...unlock bootloader..instal cwm/..instal custom rom....instalk boot img..and after all that....it do like a boot loop...any ideeas???/i'm from romania..i don;t know if it's mathers..but:-??

ciprian077 said:
after all that...scuse me...unlock bootloader..instal cwm/..instal custom rom....instalk boot img..and after all that....it do like a boot loop...any ideeas???/i'm from romania..i don;t know if it's mathers..but:-??
Click to expand...
Click to collapse
Did you try to install a JB version of ARHD?
If so, it sounds like you haven't updated the hboot.
It's almost impossible to help if you don't answer questions though.

ciprian077 said:
after all that...scuse me...unlock bootloader..instal cwm/..instal custom rom....instalk boot img..and after all that....it do like a boot loop...any ideeas???/i'm from romania..i don;t know if it's mathers..but:-??
Click to expand...
Click to collapse
BenPope said:
Did you try to install a JB version of ARHD?
If so, it sounds like you haven't updated the hboot.
It's almost impossible to help if you don't answer questions though.
Click to expand...
Click to collapse
That sound about right... but what rom did you install?
if it is a sense Jellybean rom like ARHD 12 you probably forgot to update the hboot with the firmware.zip
Sent from my HTC One X using Tapatalk 2