i have a marvel unlocked s on wildfire s.
i can't root my phone because when i go into the recovery mode, the black screen comes up with the 4 lighting keys. i don't know what to do. i read the related posts but nothing seems to help. could you guys please help.. i unlocked my phone for rooting and now i can't do anything.
You can root your phone by using the HTC super tool, just google for it.
I assume you have stock recovery on your phone, then you actually can't really use that recovery. You should try to root it with supertool
and then install CWM with ROM Manager
I hope this came in handy for you!
Sent from my VegaCream RC2 using xda premium
MrGuyFawkes said:
You can root your phone by using the HTC super tool, just google for it.
I assume you have stock recovery on your phone, then you actually can't really use that recovery. You should try to root it with supertool
and then install CWM with ROM Manager
I hope this came in handy for you!
Sent from my VegaCream RC2 using xda premium
Click to expand...
Click to collapse
i tried the supertool but it doesn't work. i tried everything even the clockworkmode recovery, the flashing of cwm works perfectly fine but the recovery mode doesn't show up so that i can install from sd card. only a black screen with key lighted comes up. i tried the things given in the black screen recovery article of xda .. but nothing seems to help. could you help me out to see through this. my moms htc wildfire s which is one year old works perfectly fine but the problem is with my new one.. i also heard that lot of people are experiencing the same.
After unlocking, you have to root the device first then install CWM and take a nandroid backup thru Recovery option.
For rooting you can also use root.zip method. just google it.
To flash CWM, goto Hboot menu and select fastboot, then goto cmd (command prompt) on pc try using fastboot commands to flash boot.img, system.img and recovery.img.
Hope this may be useful.....
Senthamil said:
After unlocking, you have to root the device first then install CWM and take a nandroid backup thru Recovery option.
For rooting you can also use root.zip method. just google it.
To flash CWM, goto Hboot menu and select fastboot, then goto cmd (command prompt) on pc try using fastboot commands to flash boot.img, system.img and recovery.img.
Hope this may be useful.....
Click to expand...
Click to collapse
bro,
i tried the root.zip method. i copied the zip file on the memory card and then went to hboot. but then i found the error which is : CID ERROR
PRESS POWER BUTTON TO REBOOT.
this is what i get.
i have a s-on unlocked marvel a510e. please help..
ok. now try this way! which helped me to solve the same issue.....
forum.xda-developers.com/showpost.php?p=21891784&postcount=1
hope this may be useful......(if really, press thanks).
Senthamil said:
ok. now try this way! which helped me to solve the same issue.....
forum.xda-developers.com/showpost.php?p=21891784&postcount=1
hope this may be useful......(if really, press thanks).
Click to expand...
Click to collapse
bro, this time i flashed the PG76IMG.zip files but when i go into the recovery to flash install from root.zip, the same black screen comes up. this is the problem which i have been having.. the black screen on recovery which makes us do nothing at all..
i think a new custom recovery has to be made for the htc wildfire s inorder to prevent the black screen on recovery. or does anyone know how to root wildfires without the need to go into any custom recovery mode. please help .. this has become a real problem.. i really wish there was a way.
aryan41 said:
bro, this time i flashed the PG76IMG.zip files but when i go into the recovery to flash install from root.zip, the same black screen comes up. this is the problem which i have been having.. the black screen on recovery which makes us do nothing at all..
Click to expand...
Click to collapse
Maybe you need to downgrade your stock ROM (if you still can boot it up so to say).
Look for a RUU for WFS and try to downgrade/upgrade HBOOT and such to an older/newer version.
Sorry that I can't post any links too RUUs, I'm on my phone.
But there is a tread with these in the Dev section I think, but if they don't work you can just google for them.
tbh I have a similar problem with my bro's WFS, I can't even unlock it because of wrong versions a such so I think your problem could be related to this.
Sent from my VegaCream RC2 using xda premium
Choose the right recovery image....
aryan41 said:
i think a new custom recovery has to be made for the htc wildfire s inorder to prevent the black screen on recovery. or does anyone know how to root wildfires without the need to go into any custom recovery mode. please help .. this has become a real problem.. i really wish there was a way.
Click to expand...
Click to collapse
I think you you've chosen the wrong cwm. Chose the right one here :
http://forum.xda-developers.com/showthread.php?t=1213229
download PG76IMG.zip and you need to install it using fastboot, it will not work using the zip file from your sd card. Make sure you delete that file before attempting what is below (adapted from CafeKampuchia's guide on rooting).
You will need SDK tools for Android, Java runtime, and HTC Sync installed on your Windows computer. Install the SDK tools in a directory named something like c:\android. Put the recovery image in this directory, too, not the zip file.
Boot the phone into HBOOT by turning the phone off, removing the battery, replacing the battery then holding down the power key and volume button. After it scans for PG7610.zip, select FASTBOOT and press the power button then connect the USB cable. The word FASTBOOT will change into FASTBOOT USB. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
Open a command prompt in Windows and navigate to c:\android
Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Hope this will install ClockworkMod recovery properly. (If really press 'thank').
Senthamil said:
I think you you've chosen the wrong cwm. Chose the right one here :
http://forum.xda-developers.com/showthread.php?t=1213229
download PG76IMG.zip and you need to install it using fastboot, it will not work using the zip file from your sd card. Make sure you delete that file before attempting what is below (adapted from CafeKampuchia's guide on rooting).
You will need SDK tools for Android, Java runtime, and HTC Sync installed on your Windows computer. Install the SDK tools in a directory named something like c:\android. Put the recovery image in this directory, too, not the zip file.
Boot the phone into HBOOT by turning the phone off, removing the battery, replacing the battery then holding down the power key and volume button. After it scans for PG7610.zip, select FASTBOOT and press the power button then connect the USB cable. The word FASTBOOT will change into FASTBOOT USB. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
Open a command prompt in Windows and navigate to c:\android
Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Hope this will install ClockworkMod recovery properly. (If really press 'thank').
Click to expand...
Click to collapse
i dont think that would work i've tried every recovery i've found here and still black screen you may want to downgrade your kernel after unlock of bootloader then use superoneclick. if not working look for my post before which uses taco root to root the device
Senthamil said:
I think you you've chosen the wrong cwm. Chose the right one here :
http://forum.xda-developers.com/showthread.php?t=1213229
download PG76IMG.zip and you need to install it using fastboot, it will not work using the zip file from your sd card. Make sure you delete that file before attempting what is below (adapted from CafeKampuchia's guide on rooting).
You will need SDK tools for Android, Java runtime, and HTC Sync installed on your Windows computer. Install the SDK tools in a directory named something like c:\android. Put the recovery image in this directory, too, not the zip file.
Boot the phone into HBOOT by turning the phone off, removing the battery, replacing the battery then holding down the power key and volume button. After it scans for PG7610.zip, select FASTBOOT and press the power button then connect the USB cable. The word FASTBOOT will change into FASTBOOT USB. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
Open a command prompt in Windows and navigate to c:\android
Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Hope this will install ClockworkMod recovery properly. (If really press 'thank').
Click to expand...
Click to collapse
first u need adb.exe, adbwinapi.dll, fastboot.exe in that c:\android\
u need a command in cmd to navigate. "cd c:\android"
yeah other than that its pretty complete. See the post he referring to. I remember using this post to root mine.
androidforums.com/wildfire-s-all-things-root/480954-guide-how-root-wildfire-s-s-finally.html
Try my all in one tool here: http://forum.xda-developers.com/showthread.php?t=1697985
It will work
Senthamil said:
I think you you've chosen the wrong cwm. Chose the right one here :
http://forum.xda-developers.com/showthread.php?t=1213229
download PG76IMG.zip and you need to install it using fastboot, it will not work using the zip file from your sd card. Make sure you delete that file before attempting what is below (adapted from CafeKampuchia's guide on rooting).
You will need SDK tools for Android, Java runtime, and HTC Sync installed on your Windows computer. Install the SDK tools in a directory named something like c:\android. Put the recovery image in this directory, too, not the zip file.
Boot the phone into HBOOT by turning the phone off, removing the battery, replacing the battery then holding down the power key and volume button. After it scans for PG7610.zip, select FASTBOOT and press the power button then connect the USB cable. The word FASTBOOT will change into FASTBOOT USB. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
Open a command prompt in Windows and navigate to c:\android
Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Hope this will install ClockworkMod recovery properly. (If really press 'thank').
Click to expand...
Click to collapse
i used the exact same version of clockworkmode recovery. the problem is not with the recovery i think its with my phone. and i tried downgrading the hboot using ruu but the problem still exists ... that is the black screen on recovery.
rezo609 said:
Try my all in one tool here: http://forum.xda-developers.com/showthread.php?t=1697985
It will work
Click to expand...
Click to collapse
bro, my wildfire s is the new one with the black screen on recovery problem, are u sure this utility will work the new phones also..?
rezo609 said:
Try my all in one tool here: http://forum.xda-developers.com/showthread.php?t=1697985
It will work
Click to expand...
Click to collapse
bro, i tried this but failed. i can't get the recovery screen where i have to select install from sd card. this is my problem .. i don't get the recovery screen instead i get a black screen.
Is your phone a marvelc ?
no it is marvel
i wish some one could come up with custom recovery which doesn't lead into this black recovery screen. please help.. isn't there any other way ?
please help rezo
rezo609 said:
Is your phone a marvelc ?
Click to expand...
Click to collapse
bro, isn't there any other way to root my wildfire s.. without ending up in the black recovery screen.. please help.. i am losing all hope..
Related
hi...
can any1 tell me how to install custom roms using pc...........
i have searched the forum....but couldnt find any answer.................
sorry for starting a new thread........
thanks in advance
General Method:
- find, download and copy a flashable rom called "fullwipe 1.3" to the sd
- copy the zip with the rom you want to load in it to your sd card
- reboot into cwm recovery
- install zip from sd card
- choose the fullwipe 1.3 zip
- install
- then choose the rom's zip
- install
- reboot
wait for it to load. there you go.
For more advanced rom's, you must make directory's on your sd card for them to work properly. Follow instructions posted by the Rom's developer for proper installation.
thanks bro..........4 all ur help..............
1 more question........
what about using it through the fone......
i mean .....after downloading through the rom manager..........should i follow the same procedure ????
question
I rooted today, s-off & eng-off, installed rom manager
what do i have to do to get clockwork to work
I try booting into recovery but, display goes blank & has a red triangle symbol & after many minutes nothing happens..... can some inform me of the step I may have missed or something i can do to verify that i have the device set up properly.
Hopefully Thanks in advance.
gixer131 said:
question
I rooted today, s-off & eng-off, installed rom manager
what do i have to do to get clockwork to work
I try booting into recovery but, display goes blank & has a red triangle symbol & after many minutes nothing happens..... can some inform me of the step I may have missed or something i can do to verify that i have the device set up properly.
Hopefully Thanks in advance.
Click to expand...
Click to collapse
Flash CWM recovery from rom manager again.
Hawks556 said:
Flash CWM recovery from rom manager again.
Click to expand...
Click to collapse
I can appreciate that, but I need to know what to do. I try to do that & i get an error while attempting to run privileged commands. Flashing sounds all great but I cant seem to get it to do anything in recovery... error issues trying to do that, or anything else, I also have super user update issues that say they put a recovery image on the sd card & to go boot that from within recovery.
Just hoping to find out why i cant do the simple things everyone speaks of.
gixer131 said:
I can appreciate that, but I need to know what to do. I try to do that & i get an error while attempting to run privileged commands. Flashing sounds all great but I cant seem to get it to do anything in recovery... error issues trying to do that, or anything else, I also have super user update issues that say they put a recovery image on the sd card & to go boot that from within recovery.
Just hoping to find out why i cant do the simple things everyone speaks of.
Click to expand...
Click to collapse
Well if you can't flash recovery from Rom Manager then there's something wrong with your root privileges or s-offs... Just to make things clear, how did you try to flash the recovery?
AT THE TOP OF THE BOOTLOADER IT MUST SAY "... ENG S-OFF RL" FOR THIS TO WORK
With the device connected, boot into bootloader and select FASTBOOT and press power once.
It will now show FASTBOOT USB, and give you 4 options.
Download the newest 4.x.x.x version of the cwm recovery from the dev section.
Download My Toolkit and Extract to C:\
In the recovery zip that you downloaded from the dev thread, find the "recovery.img" and extract it to the RESOURCE folder of my toolkit. (make sure its only the recovery.img and not the folders it sits in)
open up a command prompt (windows key + R, type "cmd" and hit enter)
type in: cd "C:\HTC ACE TOOLKIT\RESOURCE" and hit enter.
the prompt should now be in that directory.
now type in the following EXACTLY and press enter afterwards:
fastboot flash recovery recovery.img
Let it flash, and badaboom, you have just flash cwm recovery.
JSLEnterprises said:
AT THE TOP OF THE BOOTLOADER IT MUST SAY "... ENG S-OFF RL" FOR THIS TO WORK
With the device connected, boot into bootloader and select FASTBOOT and press power once.
It will now show FASTBOOT USB, and give you 4 options.
Download the newest 4.x.x.x version of the cwm recovery from the dev section.
Download My Toolkit and Extract to C:\
In the recovery zip that you downloaded from the dev thread, find the "recovery.img" and extract it to the RESOURCE folder of my toolkit. (make sure its only the recovery.img and not the folders it sits in)
open up a command prompt (windows key + R, type "cmd" and hit enter)
type in: cd "C:\HTC ACE TOOLKIT\RESOURCE" and hit enter.
the prompt should now be in that directory.
now type in the following EXACTLY and press enter afterwards:
fastboot flash recovery recovery.img
Let it flash, and badaboom, you have just flash cwm recovery.
Click to expand...
Click to collapse
The BOOTLOADER SAYs "... ENG S-OFF but no RL @ the end
Can someone instruct me to what I may have done wrong? I know if I try to s-off or ENG-off I now get a connection problem but the first time I tried it seemed to work properly.
Thanks
Thanks for the help, I have successfuly flached clockwork now & a new rom.... What should I do to update a radio for my device on telus? Thanks
gixer131 said:
Thanks for the help, I have successfuly flached clockwork now & a new rom.... What should I do to update a radio for my device on telus? Thanks
Click to expand...
Click to collapse
well, in that toolkit i told you to download is a command script that does pretty much what I told you do to for the recovery.
Since you and I have the exact same phone I recommend grabbing the radio from the 2.52 korean build (Radio_12.59.60.26U_26.11.04.21_M), and the rill's as well.
Here is the radio and ril (first 2 links, download via the dropbox links): http://forum.xda-developers.com/showthread.php?t=996630
make sure you're in bootloader > fastboot and it says FASTBOOT USB on the screen
take a radio.img from within the zip and drop it into the resource folder and then run the shorcut in the toolkit.
It will now flash the radio to your phone and reboot.
Now with the rill's you flash via cwm recovery, from the RIL zip you downloaded, off your sd card in the same way you would flash a rom.
JSLEnterprises said:
well, in that toolkit i told you to download is a command script that does pretty much what I told you do to for the recovery.
Since you and I have the exact same phone I recommend grabbing the radio from the 2.52 korean build (Radio_12.59.60.26U_26.11.04.21_M), and the rill's as well.
Here is the radio and ril (first 2 links, download via the dropbox links): http://forum.xda-developers.com/showthread.php?t=996630
make sure you're in bootloader > fastboot and it says FASTBOOT USB on the screen
take a radio.img from within the zip and drop it into the resource folder and then run the shorcut in the toolkit.
It will now flash the radio to your phone and reboot.
Now with the rill's you flash via cwm recovery, from the RIL zip you downloaded, off your sd card in the same way you would flash a rom.
Click to expand...
Click to collapse
I would Like to thank you for your help & support, I was a the step of having fastboot usb And on my pc I unziped the radio And droped the image in the resource folder, a window pops up (disk burner) only option to choose is DVD R Drive.... do I have to have the SD card unmouted as a disk drive to the computer?
leave disk burner outta this. lol
The phone should be in bootloader under "fastboot" so the highlighted area will say FASTBOOT USB (since your phone is connected to your pc).
If radio.img is in the RESOURCE folder of my toolkit, go back to the main folder (HTC ACE TOOLKIT) and just double click the "Flash Radio" shorcut.
JSLEnterprises said:
leave disk burner outta this. lol
The phone should be in bootloader under "fastboot" so the highlighted area will say FASTBOOT USB (since your phone is connected to your pc).
If radio.img is in the RESOURCE folder of my toolkit, go back to the main folder (HTC ACE TOOLKIT) and just double click the "Flash Radio" shorcut.
Click to expand...
Click to collapse
Most excellent! Thanks & Thank you, your help has been most usefull & is quite appreciated!
Changed Rom
Changed rom last night & wanted to know weather I should flash the "rill's" & "radio" each time I change roms. I just did the radio now so hope that cures the tinny sound, also it sounded kinda tinny just playing music, is there a patch or something else to do or is all that fixed in the radio?
Any suggestion on roms to try? using Revolution HD right now.
Hi guys...
i want to install the CM7 hboot on my desire, and i boot my desire in fastboot mode (voldown + power and select fastboot) and then i plug it in the computer
then i have tried to use both android flasher and fastboot commander but both of em can't contact my phone.... fastboot commander cant retrieve device info or anything...
what am i doing wrong?
i have used the alpharev method to S-off...
Root + S-OFF using Revolutionary. Then, boot into HBOOT (remove the battery, re-insert it, hold Volume Down + Power until you get a white screen). The volume rockers will probably do nothing now, as it has to check for a ZIP file first. After about 15 seconds, you should be able to browse in the menu. Select 'Fastboot' with the volume rockers, and press Power. Connect it to your PC, and use the tools you mentioned to flash a custom HBOOT.
After flashing a custom HBOOT, you'll also have to reinstall your ROM! Perhaps you also have to reinstall your recovery, but I'm not sure about that.
Chaosz-X said:
Root + S-OFF using Revolutionary. Then, boot into HBOOT (remove the battery, re-insert it, hold Volume Down + Power until you get a white screen). The volume rockers will probably do nothing now, as it has to check for a ZIP file first. After about 15 seconds, you should be able to browse in the menu. Select 'Fastboot' with the volume rockers, and press Power. Connect it to your PC, and use the tools you mentioned to flash a custom HBOOT.
After flashing a custom HBOOT, you'll also have to reinstall your ROM! Perhaps you also have to reinstall your recovery, but I'm not sure about that.
Click to expand...
Click to collapse
OP has already got root & S-OFF...
menthos said:
Hi guys...
i want to install the CM7 hboot on my desire, and i boot my desire in fastboot mode (voldown + power and select fastboot) and then i plug it in the computer
then i have tried to use both android flasher and fastboot commander but both of em can't contact my phone.... fastboot commander cant retrieve device info or anything...
what am i doing wrong?
i have used the alpharev method to S-off...
Click to expand...
Click to collapse
Before you start, boot recovery and backup your ROM!
Lets use cmd. You'll need fastboot.exe, for simplicity - put it in your c:\ (if you don't have it, download & unzip my attachment into c:\)
Download the cm7 hboot from alpharev (and check md5!!!!! - also attached md5 checker) and put it in c:\
open cmd (start menu, accessories) and type:
Code:
cd\
fastboot flash hboot bravo_alphaspl-cm7r2.img
fastboot reboot-bootloader
fastboot oem gencheckpt [COLOR="Red"](optional: this just boots you into recovery)[/COLOR]
You're more than likely to get a bootloop from your current ROM if you don't re-flash it.
bortak said:
OP has already got root & S-OFF...
Before you start, boot recovery and backup your ROM!
Lets use cmd. You'll need fastboot.exe, for simplicity - put it in your c:\ (if you don't have it, download & unzip my attachment into c:\)
Download the cm7 hboot from alpharev (and check md5!!!!! - also attached md5 checker) and put it in c:\
open cmd (start menu, accessories) and type:
Code:
cd\
fastboot flash hboot bravo_alphaspl-cm7r2.img
fastboot reboot-bootloader
fastboot oem gencheckpt [COLOR="Red"](optional: this just boots you into recovery)[/COLOR]
You're more than likely to get a bootloop from your current ROM if you don't re-flash it.
Click to expand...
Click to collapse
thanks for the good description.... actually it was my drivers that was wrong... i checked in device manager and tried to update driver and it found the right driver then...
actually i found it almost easier to use CMD than thoose programs
menthos said:
thanks for the good description.... actually it was my drivers that was wrong... i checked in device manager and tried to update driver and it found the right driver then...
actually i found it almost easier to use CMD than thoose programs
Click to expand...
Click to collapse
Yeah CMD is pretty easy, specially if you know the right commands etc. if you look at some guides you'll get the hang of it pretty fast (it's pretty simple really), there's also less to go wrong so it's safer (especially when flashing radio :O) since cmd is less prone to crashing than other programs (not that I've had a crash before.. just saying)
and I could've made it simpler.. you're just not a spanktard that doesn't get anything and you actually understand things lol so well done on that
cm7/r2
Hi, I would like to have in my desire cm7/r2 but I have a problem instal it.
Now I'm already S-OFF used Revolutionary, unrevoked, in this time NO ROOT, because I updated to offic. A2.3.3. I have: HBOOT-6.93.1002, RADIO-5.1105.27.
I would like to try install cm7/r2 hboot because I have a problem install Aurora ROM. I can't boot into the system after installation. Can anyone help me and write step by step guide? I tried cmd and fastboot but it's not working for me.
I have had installed few custom ROMs from XDA, but I'm still newbie so please be patient with me
http://imageshack.us/photo/my-images/718/cmdme.jpg/
http://imageshack.us/photo/my-images/638/revolutionary.jpg/
EDIT: OK guys I did it in other way.
I have a Tmobile G2 rooted running Gingervillian (gingerbread 2.3.1) and I tried to install the Desire z hboot to get the Sense ui.
I followed the steps here, "http://www.youtube.com/watch?v=ogZfSWLlvPg"
HERES THE PROCEDURE OF WHAT I DID:
After updating the PC10IMG.zip (Desire Z hboot) folder to the root of my G2, I was stuck on the HTC logo screen after updating. So I followed what the guy said in the video, deleted the PC10IMG file in my SD card then rebooted my phone.
After rebooting my phone, I was booted back same rom. So I flash/recovery my phone through Rom Manager and tried rebooting my phone to clockwork mod recovery mode.
After rebooting, I didn't go to Clockwork Mod but to FASTBOOT screen? I select "bootloader" and it goes to a quick load that says something like "SD loading, no image or wrong image". I select "Recovery" then it goes to the HTC logo for a split second then I'm back to FASTBOOT screen again.
This is the info on the fasboot screen? don't know if that'll help:
Vision pvt eng S-off
Hboot-0.84.2000 (pc1010000)
Microp-0425
Radio-26.02.15_m2
eMMC-boot
Sep 8 2010, 15:65:38
So now, I don't know what to do and my questions are:
1.) Is there a way to go back to the G2 hboot?
2. Can I still fix this and procedure on and install new roms on recovery clockwork mode, using Desire Z hboot? (as the video did)
Please help a brother out I'm still a noob and still learning. If this is in the wrong place, please move it to the correct place.
Anyone? if it seems confusing, please ask questions or if I need to provide more information. I really need help with this. Any suggestions will help.
Zedomax's guide are outdated, he never updated them when new methods surfaced.
Try a downgrade
http://www.youtube.com/watch?v=VdWt65tUBVc
tarroyo said:
Zedomax's guide are outdated, he never updated them when new methods surfaced.
Try a downgrade
http://www.youtube.com/watch?v=VdWt65tUBVc
Click to expand...
Click to collapse
would any PP99IMG.zip file work? And do I basically put it in the SD's root and put it into the boot menu to update the file?
Thanks
by the way, is this compatible with G2s?
don´t put the pp99img.zip on your sd !
do something different:
download a recovery.img (3.0.2.4 for vision):
http://forum.xda-developers.com/wik...sion#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
be sure to remove any pc10img.zip or so from your sdcard. then put your phone in fastboot mode (power & tp-wake) connect it to pc and flash the recovery through fastboot by typing: fastboot flash recovery recovery.img
after that you should be able to enter recovery. be sure to wipe before installing a new rom...
hoffmas said:
don´t put the pp99img.zip on your sd !
do something different:
download a recovery.img (3.0.2.4 for vision):
http://forum.xda-developers.com/wik...sion#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
be sure to remove any pc10img.zip or so from your sdcard. then put your phone in fastboot mode (power & tp-wake) connect it to pc and flash the recovery through fastboot by typing: fastboot flash recovery recovery.img
after that you should be able to enter recovery. be sure to wipe before installing a new rom...
Click to expand...
Click to collapse
I'm assuming I need to do ADB? If so, Is there a way for Mac ios
prototype2 said:
I'm assuming I need to do ADB? If so, Is there a way for Mac ios
Click to expand...
Click to collapse
Yes, you can run adb on a Mac. See the link to my adb guide in my signature (assuming you're not viewing from the XDA app, which doesn't show the full sig).
Sent from my Desire Z running CM7.
Okay, just to make it clear (I am a "step by step" guy when it comes to technical computer/phone stuff.), from my understanding:
1. Download the recovery.img (3.0.2.4 for vision) and put it in the root of my SD card.
2. Delete any pc10img.zip files from SD card.
3. Turn phone off and then turn phone onto FASTBOOT mode by holding power/volume down/camera or power and tp-wake? (Btw what's tp-wake? and during this process, is the phone in fastboot screen mode while I'm about to type the "flashboot flash recovery recovery.img"?
4. Connect to computer, open up terminal (Mac) and do the ADB process and type in "fastboot flash recovery recovery.img"
5. Wipe clean and install new rom in recovery mode? (Clockwork Mod recovery mode?)
PLEASE correct my steps or add in any steps that I'm missing. I bought my phone rooted so I never went through these steps before. Anyways please correct me, I don't want to ruin my phone anymore than it is already.
anyone can review my steps?
good morning
ad step 1: don´t put it onto your sd; put it into the adb tool folder on your pc !
ad step 3: tp-wake = the square button at the bottom of your phone (the one that acts like a mouse); to enter fastboot mode press power & tp-wake
...the phone should be in fastboot mode while typing the command.
before you type "fastboot flash recovery recovery.img" type "fastboot devices" and look if your phone shows up... if so go ahead with flashig the recovery (by the way, you may have to rename the recovery file)
step 4 and 5 look fine...
good luck
okay, I will try it in a little bit here.
In FASTBOOT USB mode, it wont recognize my device but when my device is fully on, adb works.
I get when I type "flashboot devices" (while the phone is on FASTBOOT) in terminal and get:
"-bash: fastboot: command not found"
By the way, I renamed the downloaded flash to "recovery.img" and put that file in the "platform-tools". Don't know if that'll work.
The "fastboot" command should be on your PC in the same folder as the "adb" command. Where did you get adb from, did you install the SDK and platform tools, or something cut-down ?
Sent from my Desire Z running CM7.
hm... that means that you do not have fastboot installed. maybe google for fastboot on mac, because i have a linux system... so i can´t help you in that point.
other thing you could do is following this guide (it´s a pc10img.zip with dz hboot and clockwork recovery):
http://www.virtuousrom.com/2011/06/t-mobile-g2-users-migrating-to-desirez.html
but first i would try the fastboot method - it´s safer.
Okay, I got the fastboot devices to read my phone. But it cannot load my recovery.img?
This is what got when I typed in "fastboot flash recovery recovery.img" :
error: cannot load 'recovery.img'
rename it to recovery and try again...
It's not loading the img file for some reason..
prototype2 said:
It's not loading the img file for some reason..
Click to expand...
Click to collapse
http://wiki.cyanogenmod.com/wiki/Fastboot
or use the virtuous link...
hoffmas said:
http://wiki.cyanogenmod.com/wiki/Fastboot
or use the virtuous link...
Click to expand...
Click to collapse
that link isn't working
Hello guys, first, sorry for my bad english
I was asked many times how to update CWM, I have sometimes made a little guide!
the installation:
To use the ClockworkMod recovery, you have to install it to first on your device. This is relatively simple and is implemented using the fastboot commands from the Android SDK. To install the recovery so you need:
-the Android SDK with fastboot.exe
-the right Recovery.img
First, turn off your phone and your start up in bootloader. How is that working with the many devices usually different. If your in the boot loader since, you go to the option "Fast Boot" by your using the Volume Down and Volume Up keys to navigate to the item and then press the power button once. If your boat has been in fast, you will start to enter a new CMD window with "Windows Key + R" and CMD. Press ENTER again and the cmd window should appear. Now you have spingen her to the place by the fastboot.exe exists. In our case, it goes like this:
cd C: \ tools adb
In the folder is copied by the fastboot.exe You now have the recovery.img Once you have your cell phone now infected, provided that the USB driver installed, you give into the CMD window the following command:
fastboot flash recovery recovery.img
The file is recovery.img while the ClockworkMod recovery. After the command is executed successfully, the ClockworkMod recovery is successfully installed.
if there are any questions, just write
Some times hard to follow your English but very good guide thanks for sharing
sent from my android powered beast!
or you could possibly download rom manager from the play store and flash clockworkmod recovery?
yes, this is possibly too, but than you maybe have not the latest version of the CWM
Edit: and for any Roms you need the latest version of CWM to install it
And thid is a guide how to update the CWM, not how to install it
Sent from my Wildfire S using XDA
This is Exactly what i did when i Google it.. WEll Thanks MAte.. this will Sure Help Other Newbies like me.. I Believe this is only applicable on Unlocked BOOTLOADERS as i dont have S-OFF... (Am i Right?)
Keep Sharing!
you only need to unlock your Bootloader with HTCDev! than you can flah the CMW Recovery
TheSolving said:
yes, this is possibly too, but than you maybe have not the latest version of the CWM
Edit: and for any Roms you need the latest version of CWM to install it
And thid is a guide how to update the CWM, not how to install it
Sent from my Wildfire S using XDA
Click to expand...
Click to collapse
You can download and update CWM with ROMmanager
Envoyé depuis mon HTC Wildfire S A510e
thanks, i don't knew that
Hi
I bought my wfs in poland (sorry for my english and mistakes). I have problem because I updated my phone to 2.26.401.3 in phone jumped message about new soft and I update. Now I unlocked bootloader with htcdev and when I go into recovery (cwm installed by rom manager) I have black screen and under screen leds are light. I tried this but this isn't working now i downgraded phone to 2.13.401.3 and recovery (cwm) still not working. I tried another recovery but no one working. I want install new rom. What do? Can I install custom rom without recovery? or any solutions of this problem?
I had very similar problems, and could not find any solution, so I created custom recovery.img with appropriate kernel. Download attached recovery.img and using fastboot burn it:
$ fastboot flash recovery recovery,img
Phone needs to be in "fastboot usb" mode. Let me know if you have problems with it. Works for me.
lanaczko said:
I had very similar problems, and could not find any solution, so I created custom recovery.img with appropriate kernel. Download attached recovery.img and using fastboot burn it:
$ fastboot flash recovery recovery,img
Phone needs to be in "fastboot usb" mode. Let me know if you have problems with it. Works for me.
Click to expand...
Click to collapse
Dint work for me dude. Recovery is still a blank screen.
rajanand made a thread about this last time look for it and it works
ngoralph said:
rajanand made a thread about this last time look for it and it works
Click to expand...
Click to collapse
Thankyou! Found his post. I shall give it a shot now. Cheers
it dint work for me .. do you know any other way to get rid of this black screen on recovery.. or atleast findout the reason behind such a thing.
[TUTORIAL] How to Install ClockworkMod Recovery on wildfire s
I Hope you have SDK tools for Android, Java runtime, and HTC Sync installed on your Windows PC. After unlocking the bootloader and rooted your device follow this:
(Note: You only need to install HTC Sync for the drivers that come with it. But the program sometimes causes conflicts, so during this procedure, make sure it is not running. Open Task Manager in Windows and kill it. If you don’t use HTC Sync, you may also open Control Panel and uninstall it without uninstalling the drivers.)
[OPTIONAL] Update Android software version to 2.3.5
If you have a Marvel/A510e, It is recommended updating to 2.3.5 before proceeding (if possible), though you can root a 2.3.3 device. If you decide to root 2.3.3 now and install 2.3.5 later, you’ll loose your root, cwm and have to do it again.
Make sure the phone is connected in Charge only mode. Enable USB debugging by going to Settings > Applications > Development > USB. Also Disable "Fast boot" by go to Settings>Power>uncheck "Fast boot".
1. Download the official 5.0.2.8 image at ClockworkMod’s index of recoveries here: http://www.clockworkmod.com/rommanager/
Make sure you choose the right one for your device whether Marvel or MarvelC. If you downloaded the zip version, extract the img file from the zip you just downloaded.
2. Boot the phone into HBOOT. After it scans for PG7610.zip, select 'FASTBOOT' and press the <Power> button then connect the USB cable. The word 'FASTBOOT' will change into 'FASTBOOT USB'. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
3. Open command prompt in Windows and navigate to the folder where you extracted the recovery image in step 1.
4. Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Try the above method, if it fails then go down:
It's a full version, so just download the .zip put it in sdcard then replace battery, press <power> with Vol Down.
http://forum.xda-developers.com/showthread.php?t=1213229
____________________________________________
Hope this may be useful. (If really, Just press 'Thanks').
http://forum.xda-developers.com/showthread.php?t=1781105 this will work i bet ya dont say thanks just click it
cant work for me dear senior
Senthamil said:
I Hope you have SDK tools for Android, Java runtime, and HTC Sync installed on your Windows PC. After unlocking the bootloader and rooted your device follow this:
(Note: You only need to install HTC Sync for the drivers that come with it. But the program sometimes causes conflicts, so during this procedure, make sure it is not running. Open Task Manager in Windows and kill it. If you don’t use HTC Sync, you may also open Control Panel and uninstall it without uninstalling the drivers.)
[OPTIONAL] Update Android software version to 2.3.5
If you have a Marvel/A510e, It is recommended updating to 2.3.5 before proceeding (if possible), though you can root a 2.3.3 device. If you decide to root 2.3.3 now and install 2.3.5 later, you’ll loose your root, cwm and have to do it again.
Make sure the phone is connected in Charge only mode. Enable USB debugging by going to Settings > Applications > Development > USB. Also Disable "Fast boot" by go to Settings>Power>uncheck "Fast boot".
1. Download the official 5.0.2.8 image at ClockworkMod’s index of recoveries here: http://www.clockworkmod.com/rommanager/
Make sure you choose the right one for your device whether Marvel or MarvelC. If you downloaded the zip version, extract the img file from the zip you just downloaded.
2. Boot the phone into HBOOT. After it scans for PG7610.zip, select 'FASTBOOT' and press the <Power> button then connect the USB cable. The word 'FASTBOOT' will change into 'FASTBOOT USB'. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
3. Open command prompt in Windows and navigate to the folder where you extracted the recovery image in step 1.
4. Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Try the above method, if it fails then go down:
It's a full version, so just download the .zip put it in sdcard then replace battery, press <power> with Vol Down.
http://forum.xda-developers.com/showthread.php?t=1213229
____________________________________________
Hope this may be useful. (If really, Just press 'Thanks').
Click to expand...
Click to collapse
cant work for me dear