Thank you for taking time to read this!
I have a htc one x international version, i successfully unlocked the bootloader installed clockwormod recovery v5.8.4.0 and rooted the phone installing superSU without any problems.
I have been using some mod rom for a long time, And recently updated BUSYBOX, and then turned off phone. Now and now i cant get passed the htc boot screen, i have tried deleting cache, loading a previous restore img from 6 months ago, rebooting bootloader but none of that worked, here are the details from the boot screen:
p.s if you can get me into the phone, would be a life saver! or stock android 4.x that would be an added "Brucey" bonus.
Thank you again for your time, best regards
Ernest
ENDEAVORU PUT SHIP S-ON RL
HBOOT-0.95.0000
CPLD-None
MICROP-None
RADIO-1.1204.105.14
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
Modem Path: Off
May 8 2012 21:32:10
HBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
SHOW BARCODE
IMAGE CRC
Erniemac said:
Thank you for taking time to read this!
I have a htc one x international version, i successfully unlocked the bootloader installed clockwormod recovery v5.8.4.0 and rooted the phone installing superSU without any problems.
I have been using some mod rom for a long time, And recently updated BUSYBOX, and then turned off phone. Now and now i cant get passed the htc boot screen, i have tried deleting cache, loading a previous restore img from 6 months ago, rebooting bootloader but none of that worked, here are the details from the boot screen:
p.s if you can get me into the phone, would be a life saver! or stock android 4.x that would be an added "Brucey" bonus.
Thank you again for your time, best regards
Ernest
ENDEAVORU PUT SHIP S-ON RL
HBOOT-0.95.0000
CPLD-None
MICROP-None
RADIO-1.1204.105.14
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
Modem Path: Off
May 8 2012 21:32:10
HBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
SHOW BARCODE
IMAGE CRC
Click to expand...
Click to collapse
try fastboot erase cache:good:
rudresh128631 said:
try fastboot erase cache:good:
Click to expand...
Click to collapse
Hi there!
I went into Fastboot, and only have:
HBOOT
REBOOT
REBOOT BOOTLOADER
POWER DOWN
so i went back into HBOOT
RECOVERY
-Wipe Cache Partition
I have previously also tried fixing user permissions and wipe dalvik cache.
Still no joy I can mount the SD Card so my stuff is still there, i have backed up my photos and whatsapp as I'd like to keep the chat msgs haha.
Do you have any other ideas rudresh?
Thanks
To install a new rom i suggest to update the hboot. It's to low for current developed roms/mods.
Post the outcome of
Fastboot getvar version-main
Get you back to stock and update the phone. Then re-root or install a custom rooted rom
Mr Hofs said:
To install a new rom i suggest to update the hboot. It's to low for current developed roms/mods.
Post the outcome of
Fastboot getvar version-main
Get you back to stock and update the phone. Then re-root or install a custom rooted rom
Click to expand...
Click to collapse
atm i dont have fastboot getvar version-main, will this option become available once i have updated HBOOT?
many thanks for answering my noobie questions!
It's a command via fastboot. You put the phone in the bootloader where you see FASTBOOT USB in red when you connect the phone to the pc. Then open a command prompt on the pc from the fastboot folder and type in that command.
Download HTC one x fastboot tools. Install htc drivers. Open fast boot tool folder. Hold shift button and right click then chose open in command window from dropdown list. Boot your device into boot loader. Connect your device. Select fastboot in device. Then it should turn fastboot to fastboot usb highlighted in red color. In command prompt type fastboot devices. If your devices serial number appeared in command window then your device is connected. Type fastboot erase cache. After erasing cache reboot.
Sent from my HTC One X using xda premium
rudresh128631 said:
Download HTC one x fastboot tools. Install htc drivers. Open fast boot tool folder. Hold shift button and right click then chose open in command window from dropdown list. Boot your device into boot loader. Connect your device. Select fastboot in device. Then it should turn fastboot to fastboot usb highlighted in red color. In command prompt type fastboot devices. If your devices serial number appeared in command window then your device is connected. Type fastboot erase cache. After erasing cache reboot.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Not gonna work.....
Mr Hofs said:
It's a command via fastboot. You put the phone in the bootloader where you see FASTBOOT USB in red when you connect the phone to the pc. Then open a command prompt on the pc from the fastboot folder and type in that command.
Click to expand...
Click to collapse
Hi Mr Hofs!
THanks for your advice, I have fastboot working now at home. I tried fastboot erase cache just in case it worked. Then did your command
Code:
C:\Android\android-sdk\platform-tools>Fastboot getvar version-main
version-main: 1.29.401.11
finished. total time: 0.085s
Okay, make a copy of the sdcard to the pc just in case. Then download this ruu
http://www.androidruu.com/getdownlo...Radio_2.1204.127.19_release_271851_signed.exe
Relock the bootloader :
Fastboot oem lock
Then keep the phone in the bootloader and execute the ruu with admins rights. Right click the ruu.exe and choose
Run as administrator
It flashes the phone to stock. Boot it up after that and go to settings-about-software update and check for ota ..... Do this after every ota you get until you get no notifications anymore. Report back with issues or when you have updated the phone multiple times.
Mr Hofs said:
Okay, make a copy of the sdcard to the pc just in case. Then download this ruu
http://www.androidruu.com/getdownlo...Radio_2.1204.127.19_release_271851_signed.exe
Relock the bootloader :
Fastboot oem lock
Then keep the phone in the bootloader and execute the ruu with admins rights. Right click the ruu.exe and choose
Run as administrator
It flashes the phone to stock. Boot it up after that and go to settings-about-software update and check for ota ..... Do this after every ota you get until you get no notifications anymore. Report back with issues or when you have updated the phone multiple times.
Click to expand...
Click to collapse
Wow your fast! i just figured out what your trying to get me to do, and found the RUU page haha. Thank you so much for your time. BRB in 20 mins or so!
Mr Hofs said:
Okay, make a copy of the sdcard to the pc just in case. Then download this ruu
http://www.androidruu.com/getdownlo...Radio_2.1204.127.19_release_271851_signed.exe
Relock the bootloader :
Fastboot oem lock
Then keep the phone in the bootloader and execute the ruu with admins rights. Right click the ruu.exe and choose
Run as administrator
It flashes the phone to stock. Boot it up after that and go to settings-about-software update and check for ota ..... Do this after every ota you get until you get no notifications anymore. Report back with issues or when you have updated the phone multiple times.
Click to expand...
Click to collapse
OK IM IN!!!!!!!!! Android 4.03 but im not getting any OTA updates, maybe because Im abroad currently? ill dig around for some updates.
Thanks so much, ill drop you a lil tip once i get paid before Chinese New Year
Then download this one and run it too
http://www.persianhtc.net/index.php...Radio_2.1204.135.20_release_274900_signed.exe
And if you don't get ota after that one you can continue to install this one
http://www.androidruu.com/getdownlo...Radio_5.1204.162.29_release_302015_signed.exe
And then there must be ota available
Mr Hofs said:
Then download this one and run it too
http://www.persianhtc.net/index.php...Radio_2.1204.135.20_release_274900_signed.exe
And if you don't get ota after that one you can continue to install this one
http://www.androidruu.com/getdownlo...Radio_5.1204.162.29_release_302015_signed.exe
And then there must be ota available
Click to expand...
Click to collapse
First one was perfect getting updates galore!
Quick question: My old apps are still on the SD Card, so say i install Whatsapp / WeChat from the PlayStore, and move to SD Card will it link up the old data? or just overwrite the folder so Titanium back up is my best bet.
Just gonna finish them then i guess flash SUupdate.zip or whatever it is and i can use titanium back up to restore my apps.
Many thanks again
-E
Yeah via TB is a good option have fun
Related
Hello,
my HTC desire has been rooted for like 8 months or so, with Oxygen 2.3.2 ROM installed. Yesterday i had my first problem, my apps began to freeze, and it ended up that my hole phone were froozen. I pulled my battery in and out, nothing happened.
I went into recovery and made a factoery reset, and wiped everything i could (i have read, that it was a good idea) and when i turned my phone up again, i realised that i had deleted my ROM on the phone...
So again... i went in to recovery and tryed to flash my ROM again, but i ran into a problem:
Code:
E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(No such file or directory)
E:Can't mount /sdcard
after i googled and tryed for like an hour and a half, i got it fixed with
Code:
cd C:\android-sdk-windows\platform-tools
fastboot oem enableqxdm 0
fastboot oem eraseconfig
and as i remember i took my batteri out again, and placed my memery-card into my computer, moved my ROM (oxygen 2.3.2) over again. So i tryed to get into recovery, but now it wont get in there, after i press the POWER-button on "Recovery" it just stocks on the HTC load screen, i left it that way the hole night, and when i woke up, nothing was happened...
i pulled my battery out, and now i got some problems just booting up to fastboot/hboot to.
so the problems now:
problems getting into RECORVERY
Sometimes problems booting to HBOOT/FASTBOOT
If you need any information, please tell me so
PS: Im sorry if my english is kind of bad
You should try flashing a new recovery image via fastboot once you get there. That worked for me when i couldnt enter recovery.
Sent from my HTC Runnymede using XDA App
according to....
EvertorN said:
You should try flashing a new recovery image via fastboot once you get there. That worked for me when i couldnt enter recovery.
Sent from my HTC Runnymede using XDA App
Click to expand...
Click to collapse
according to: theunlockr.com/2009/10/15/how-to-flash-a-new-recovery-image-if-you-are-already-rooted i need to get into the phone and download an app, and i dont got a ROM installed, i kind of deleted it in a way
magnuskahr said:
according to: theunlockr.com/2009/10/15/how-to-flash-a-new-recovery-image-if-you-are-already-rooted i need to get into the phone and download an app, and i dont got a ROM installed, i kind of deleted it in a way
Click to expand...
Click to collapse
I assume you are S-OFFed so just download a recovery.img file of your recovery, boot into fastboot and flash via fastboot utility your recovery.img file like 'fastboot flash recovery path\to\recovery.img'
Goodluck!
USB functions are working? (Mount/debuging)
alexei_kom said:
I assume you are S-OFFed so just download a recovery.img file of your recovery, boot into fastboot and flash via fastboot utility your recovery.img file like 'fastboot flash recovery path\to\recovery.img'
Goodluck!
Click to expand...
Click to collapse
I'm S-ON, will this help:?
http://forum.xda-developers.com/showthread.php?t=1275632
"I'm S-ON, I can't boot recovery, and my phone doesn't boot "
This is a bit of a worse situation, as you cannot flash system critical parts such as the recovery image and just restore a backup. This unfortunately means that you will lose all of your data when you attempt to fix the phone.
[STEP1]- Make sure that you have a goldcard. If not, create one from the tutorial.
[STEP2]- Battery pull. Hold the BACK button and the POWER button to boot into FASTBOOT mode.
[STEP3]- Download the latest WWE RUU from here
[STEP4]- Run the RUU and wait for completion WARNING: DO NOT, BY ANY CIRCUMSTANCES INTERRUPT THE PROCESS - THIS WILL MORE THAN LIKELY END UP WITH A BRICKED PHONE - NOT EVEN IF GOD HIMSELF TELLS YOU TO DO SO, OR IF THE US PRESIDENT THREATENS YOU WITH THERMO-NUCLEAR WAR
[STEP5]- Once the phone is booted, you are now returned completely to stock. You will need to re-root again, and I'd recommend S-OFF
Click to expand...
Click to collapse
name.vic said:
USB functions are working? (Mount/debuging)
Click to expand...
Click to collapse
i dont remember, im in school and was stupid enough not to take the desire with me, i will test later when i come home
What is the hboot version?
name.vic said:
What is the hboot version?
Click to expand...
Click to collapse
Again, when i come home i will tjeck it
so in about 4 hours
My freind got the Desire too, and it's as old as mine, and we rooted our phones from the same tutorial.. so i gesh we got the same hboot version??
here is his hboot (as i remember, i got the same) HBOOT-0.93.0001
magnuskahr said:
I'm S-ON, will this help:?
http://forum.xda-developers.com/showthread.php?t=1275632
Click to expand...
Click to collapse
Are you sure you are S-ON? Because you can't perform these
fastboot oem enableqxdm 0
fastboot oem eraseconfig
Click to expand...
Click to collapse
if you are S-ON...
Post here your phone specs while in hboot...
last i checked i was on S-ON, i dont know if that were those commands which helped me (but it think it was)
but i will make sure about it, when i get home
now writing what is on the fastboot screen:
BRAVO PVT1 SHIP S-ON
HBOOT-0.93.0001
TOUCH PANEL-SYN0101
RADIO-5.11.05.27
Aug 10 2010, 17:52:18
FASTBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
BOOTLOADER
REBOOT
REBOOT BOOTLOADER
POWER DOWN
name.vic said:
USB functions are working? (Mount/debuging)
Click to expand...
Click to collapse
My pc is making a sound when i connect it, but it wont find the hdd, but i can run
Code:
fastboot oem boot
and the phone boots and stucks and the android-skatbording-screen
i just ran
Code:
fastboot reboot
the phone shut down, and i cant turn it on... any ideas?
magnuskahr said:
i just ran
Code:
fastboot reboot
the phone shut down, and i cant turn it on... any ideas?
Click to expand...
Click to collapse
SLCD brick?
Try to pull the battery, power on + back (this will get you into fastboot), wait about 10-20 seconds, then connect it to usb. In fastboot utility type 'fastboot devices' and see if it detects your phone. If it does, run an RUU.
Jep i tryed pull the battery out, i can still not turn it on
magnuskahr said:
Jep i tryed pull the battery out, i can still not turn it on
Click to expand...
Click to collapse
If you are SLCD bricked you won't see anything on your screen. Read the previous post I wrote...
i guess that "fastboot utility" is cmd right??
if that so, nothing happend
I flash new custom rom, but I clean all sd card.
My mobile restart only fastboot,
I can't do anything because my battery are low.
I've downloaded RUU and tried flash boot and image but appers a error: "remote: not allowed"
I'm using fastboot recharge all time.
* RUU_ENDEAVOR_U_ICS_40_S_HTC_ARA_2.17.415.2_Radio_2.1204.135.20_release_275980_signed
Follow my screen:
**** relocked ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.12.0000
CPLD-Nome
MICROP-Nome
RADIO-2.1204.135.20
eMMC-bootmode:disable
CPU-bootmode :disable
HW Secure boot :disable
MODEM PATH FF
Jun 28 2012,11:31:28
Fastboot USB
<VOL UP>
<VOL DOWN>
<POWER>
HBOOT
REBOOT
REBOOT BOOTLOADER
POWER DOWN.
sorry my bad english
Why do you clean your sd card?
From fastboot you can flash custom recovery, and then you can enter your custom recovery to mount the sd card..
from there, copy a custom rom on your choice and flash it..remember to flash the kernel too..
Good luck bro! :good:
I tried too
RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed.exe
RUU_ENDEAVOR_U_ICS_40_S_hTC_Asia_WWE_2.17.707.3_Radio_2.1204.135.20_release_278245_signed.exe
No efect. all gime a error.
Anybody??
Freddy1X said:
Why do you clean your sd card?
From fastboot you can flash custom recovery, and then you can enter your custom recovery to mount the sd card..
from there, copy a custom rom on your choice and flash it..remember to flash the kernel too..
Good luck bro! :good:
Click to expand...
Click to collapse
I already tried it and nothing
vitorhumel said:
I already tried it and nothing
Click to expand...
Click to collapse
When I try enter to recovery appears "this build is for development purposes only....bla bla" what should i do?"this build is for development purposes only....bla bla"
what should i do?
you must re-unlock your bootloader first with fastboot flash Unlock_code.bin
full instructions here http://www.htcdev.com/bootloader/unlock-instructions/page-4
then flash recovery
vitorhumel said:
I flash new custom rom, but I clean all sd card.
My mobile restart only fastboot,
I can't do anything because my battery are low.
I've downloaded RUU and tried flash boot and image but appers a error: "remote: not allowed"
I'm using fastboot recharge all time.
* RUU_ENDEAVOR_U_ICS_40_S_HTC_ARA_2.17.415.2_Radio_2.1204.135.20_release_275980_signed
Follow my screen:
**** relocked ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.12.0000
CPLD-Nome
MICROP-Nome
RADIO-2.1204.135.20
eMMC-bootmode:disable
CPU-bootmode :disable
HW Secure boot :disable
MODEM PATH FF
Jun 28 2012,11:31:28
Fastboot USB
<VOL UP>
<VOL DOWN>
<POWER>
HBOOT
REBOOT
REBOOT BOOTLOADER
POWER DOWN.
sorry my bad english
Click to expand...
Click to collapse
please follow these steps:
1- from the fastboot unplug ur phone then use vol- button to "Power Down" option then clock the power button
2- wait like 10 seconds or so then plug it to the wall charger, not the PC USB one, it'll charge, just be sure that it remains off and the red light is on for charging, redo the prev steps if it power itself on again
3- give it like half an hour just to be sure it has some battery to do the coming steps
4- power it on and from FASTBOOT USB then on the cmd of the fastboot folder write the following "fastboot flash unlocktoken Unlock_code.bin" just be sure that u have the "Unlock_code.bin" at the same fastboot folder
5- another screen will appear to your device asking if u wanna unlock your bootloader, click yes using vol+ then Power button
Now you have the boot loader unlocked
6- download the "custom recovery 5.8.4.2" and put it to the same fastboot folder
7- from the FASTBOOT USB use the cmd and write the following "fastboot flash recovery <the name of the downloaded recovery.img>" then hit Enter
8- from fastboot go to recovery
9- select mount and storage
10- select mount USB storage
11- plug your device to ur PC and wait till it appear as a flash drive
12- add your "CUSTOM rom" to your SD
13- unmount the device
14- from the recovery select "install from zip"
15- select your CUSTOM rom
16- wait till the installation completes
17- reboot
18-done
hope this will solve your problem
just hit thanks if it did
Hossam.Abdelsalam said:
please follow these steps:
1- from the fastboot unplug ur phone then use vol- button to "Power Down" option then clock the power button
2- wait like 10 seconds or so then plug it to the wall charger, not the PC USB one, it'll charge, just be sure that it remains off and the red light is on for charging, redo the prev steps if it power itself on again
3- give it like half an hour just to be sure it has some battery to do the coming steps
4- power it on and from FASTBOOT USB then on the cmd of the fastboot folder write the following "fastboot flash unlocktoken Unlock_code.bin" just be sure that u have the "Unlock_code.bin" at the same fastboot folder
5- another screen will appear to your device asking if u wanna unlock your bootloader, click yes using vol+ then Power button
Now you have the boot loader unlocked
6- download the "custom recovery 5.8.4.2" and put it to the same fastboot folder
7- from the FASTBOOT USB use the cmd and write the following "fastboot flash recovery <the name of the downloaded recovery.img>" then hit Enter
8- from fastboot go to recovery
9- select mount and storage
10- select mount USB storage
11- plug your device to ur PC and wait till it appear as a flash drive
12- add your "CUSTOM rom" to your SD
13- unmount the device
14- from the recovery select "install from zip"
15- select your CUSTOM rom
16- wait till the installation completes
17- reboot
18-done
hope this will solve your problem
just hit thanks if it did
Click to expand...
Click to collapse
Now I already installed the custom rom (ARHD 9.7.2). But when appears the wallpaper to start setting up, it restarts in boot loop.
I tried to restore using a backup and it didn't work. (old backup CWM 5.8.2.7) now I have CWM 5.8.4.0
What should I do?
vitorhumel said:
Now I already installed the custom rom (ARHD 9.7.2). But when appears the wallpaper to start setting up, it restarts in boot loop.
I tried to restore using a backup and it didn't work. (old backup CWM 5.8.2.7) now I have CWM 5.8.4.0
What should I do?
Click to expand...
Click to collapse
1- from the downloaded ARHD zip file extract the "boot.img"
2- put it to your fastboot folder
3- plug your device to the FASTBOOT USB
4- flash the boot.img "fastboot flash boot boot.img" then hit enter
5- then "fastboot erase cache" then hit enter again
6- then "fastboot reboot"
you are done
Hossam.Abdelsalam said:
1- from the downloaded ARHD zip file extract the "boot.img"
2- put it to your fastboot folder
3- plug your device to the FASTBOOT USB
4- flash the boot.img "fastboot flash boot boot.img" then hit enter
5- then "fastboot erase cache" then hit enter again
6- then "fastboot reboot"
you are done
Click to expand...
Click to collapse
Now everthing is ok. Thanks for all Everybody.
i do have similar problem but another system and country
Guys i do have the same problem but - here what is different:
***Unlocked***
Endeavoru PVT Ship S-On Rl
HBOOT-1.12.0000
CPLD-NONE
MICROP-NONE
RADIO- 1.1204.103.14h (it was different minute ago ?)
ennc0biitnide:dissabled
Cpu-bootmode: disabled
HW secureboot: enabled
Modem path : off
Jun 28 2012 11:31:28
Recovery i do have - CWM v.5.8.4.0
I did wipe data too by mistake... wrong button ;(
Problem is my phone is HTC ONE X - hutchinson 3g UK
when i used cmd.exe and Fastboot i have putet version-main: 2.17.771.3 -> and i can not get it anywhere on net.... i have downloaded those:
RUU_ENDEAVOR_U_ICS_40_S_HTC_ARA_2.17.415.2_Radio_2.1204.135.20_release_275980_signed
RUU_ENDEAVOR_U_ICS_40_H3G_UK_1.28.771.9_Radio_1.1204.103.14H_release_256494_signed
RUU_ENDEAVOR_U_ICS_40_H3G_UK_1.26.771.2_Radio_1.1204.90.13H_release_251403_signed
non above working with this phone its just saing FAILED. phone is charged.
Sorry for overtoping but please help me with that ... i have tryed from exacly 13 hours sitting ALL THE TIME AT FRONT OF MY PC trying to fix that stupid phone ;/ human error, 14 hours fail...
_______________
Ok now i manage to get to recovery mode - > mound sd card - copy rom - install it BUT !! ->>> phone is booting to wallpaper and lock screen and rebooting over and over after seeing "time and lock screen" ??????????? wtf?
_________________
YEEEEEEEEEEEEEEEEEES I have done it i promiss i will support xda with at least 500£ in next week <3
- i just checked last post again... :> love u
Hossam.Abdelsalam said:
please follow these steps:
1- from the fastboot unplug ur phone then use vol- button to "Power Down" option then clock the power button
2- wait like 10 seconds or so then plug it to the wall charger, not the PC USB one, it'll charge, just be sure that it remains off and the red light is on for charging, redo the prev steps if it power itself on again
3- give it like half an hour just to be sure it has some battery to do the coming steps
4- power it on and from FASTBOOT USB then on the cmd of the fastboot folder write the following "fastboot flash unlocktoken Unlock_code.bin" just be sure that u have the "Unlock_code.bin" at the same fastboot folder
5- another screen will appear to your device asking if u wanna unlock your bootloader, click yes using vol+ then Power button
Click to expand...
Click to collapse
First of all thank you Hossam.Abdelsalam for the instructions. However, screen on my HTC One X (TM UK) is not staying off if I connect wall charger (step 1 and 2). So, it is not charging battery. Any idea what can I do?
mhs409 said:
First of all thank you Hossam.Abdelsalam for the instructions. However, screen on my HTC One X (TM UK) is not staying off if I connect wall charger (step 1 and 2). So, it is not charging battery. Any idea what can I do?
Click to expand...
Click to collapse
Have a search for a bat file that lets you charge your phone in a reboot cycle, then you can go from there.
vitorhumel said:
Now everthing is ok. Thanks for all Everybody.
Click to expand...
Click to collapse
have the same problem..but remains at thc one beat audioi...bl blah start up..it's there athor possibilities to erase chache....i don';t kniw...from recovery mode.or something like that it's give me an error in cmd fastboot erase cache...errror
ciprian077 said:
have the same problem..but remains at thc one beat audioi...bl blah start up..it's there athor possibilities to erase chache....i don';t kniw...from recovery mode.or something like that it's give me an error in cmd fastboot erase cache...errror
Click to expand...
Click to collapse
What error?
BenPope said:
What error?
Click to expand...
Click to collapse
i've make'it...to fastboot erase cache...i;ve instaled the arhd...pff....all the thing step by step....but it's no passing for the thc one beats audio screen...what can i do???
ciprian077 said:
i've make'it...to fastboot erase cache...i;ve instaled the arhd...pff....all the thing step by step....but it's no passing for the thc one beats audio screen...what can i do???
Click to expand...
Click to collapse
Yeah, but what error? what does it say when you try to erase cache?
Please, slow down and tell us what you are trying to do and what you have already done.
Did you:
- unlock the phone with HTC Dev?
- flash Unlock_code.bin?
- install custom recovery?
- install custom rom?
- install the boot.img for the custom rom via fastboot?
We're here to help but we cant if your not telling us whats wrong
TheJoker79 said:
Yeah, but what error? what does it say when you try to erase cache?
Please, slow down and tell us what you are trying to do and what you have already done.
Did you:
- unlock the phone with HTC Dev?
- flash Unlock_code.bin?
- install custom recovery?
- install custom rom?
- install the boot.img for the custom rom via fastboot?
We're here to help but we cant if your not telling us whats wrong
Click to expand...
Click to collapse
after all that...scuse me...unlock bootloader..instal cwm/..instal custom rom....instalk boot img..and after all that....it do like a boot loop...any ideeas???/i'm from romania..i don;t know if it's mathers..but:-??
ciprian077 said:
after all that...scuse me...unlock bootloader..instal cwm/..instal custom rom....instalk boot img..and after all that....it do like a boot loop...any ideeas???/i'm from romania..i don;t know if it's mathers..but:-??
Click to expand...
Click to collapse
Did you try to install a JB version of ARHD?
If so, it sounds like you haven't updated the hboot.
It's almost impossible to help if you don't answer questions though.
ciprian077 said:
after all that...scuse me...unlock bootloader..instal cwm/..instal custom rom....instalk boot img..and after all that....it do like a boot loop...any ideeas???/i'm from romania..i don;t know if it's mathers..but:-??
Click to expand...
Click to collapse
BenPope said:
Did you try to install a JB version of ARHD?
If so, it sounds like you haven't updated the hboot.
It's almost impossible to help if you don't answer questions though.
Click to expand...
Click to collapse
That sound about right... but what rom did you install?
if it is a sense Jellybean rom like ARHD 12 you probably forgot to update the hboot with the firmware.zip
Sent from my HTC One X using Tapatalk 2
First of all I'm new to this forum so Hello! second of all I'm also new to rooting and custom ROM's.
So today after 3 days of trying to unlock my HTC One X by htcdev.com i finally submitted my identifier token and i got the Unlock_code.bin
I downloaded Android Revolution HD 18.1, I also downloaded the CWM v5.8.4.0 and installed it on my phone.
After that i followed the instructions on how to install the Revolution HD 18.1, after doing all the steps on my phone it told me it was succesfully installed and i had to reboot the system. So i did it, then the part comes where i'm getting stuck. It was rebooting my htc , and it wouldn't go further then the opening screen HTC quietly brilliant it was stuck there. trying to put my phone on and off and on and off, same problem. Now i can only go in the boot-loader menu and in recovery menu and that's it. I re-lock my phone again to update firmware. NOW I HAVE ONLY ACESS TO BOOT MENU AND BATTERY IS ALSO NOT CHARGING I PUT IT ON CHARGING FOR 5, 6 HOURS. WHEN EVER I TRY TOO UNLOCK BOOT LOADER IT SAYS BATTER LOW
I did a lot of research on how to fix my problem, unfortunately nothing helped. (Maybe cuz I'm a noob and new to this)
I tried almost every thing but nothing help
Can someone please help me with this, i've been trying it all day now and i'm giving up the hope.
Some information at the hboot menu of my HTC one X
SHIP S-ON RL
HBOOT-1.31
CPLD-None
MICROP-None
RADIO-2.1204.135.20
eMMC-bootmode: disabled
CPU-bootmode : disabled
1. How to charge my HOX battery as it remain low after long time charging and not allow me to do anything.
2. Before ARHD 18.1 i am running with rom skydragon. please help
Sorry about some information i post above my cell phone is hardly on for10 or 15 sec so i put some information as i remember now here is the exact information.
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.39.0000
CPLD-None
MICROP-None
RADIO-5.1204.162.29
eMMC-bootmode: disabled
CPU-bootmode : disabled
HW SECURE BOOT : ENABLE
MODE PATH : OFF
DEC 17 2012, 13:59:37
If any one from you guys help me will appreciate.
My phone is rooted but re lock. so i am not able to go in recovery mood. and phone directly go too fast boot mood.
Secondly it is not charging i put it on charging for long time the red led light is not stable and continue blinking. So i am not able to run any command as it say : Battery level is too low to flash. before flashing with ARHD 18.1 battery is normal. please help. I am so sick of any one come with good recommendation. Regards in advanced.
flash the boot.img witch came with your rom zip charge your battery in recovery
thanks if i helpped
too flash the boot img go to bootloader then fastboot
and put the boot.img from the rom zip to the fastboot folder and type
'fastboot flash boot boot.img'
then 'fastboot erase cache'
then it should work fine
thank me if i helped
How to charge in recovery
The5alodi said:
flash the boot.img witch came with your rom zip charge your battery in recovery
thanks if i helpped
too flash the boot img go to bootloader then fastboot
and put the boot.img from the rom zip to the fastboot folder and type
'fastboot flash boot boot.img'
then 'fastboot erase cache'
then it should work fine
thank me if i helped
Click to expand...
Click to collapse
Dear i put cell on charging for long time but when i switched it red line say fast mode low battery status. when ever i try to run any command it says. Failed.( remote battery low). my device is rooted but its relocked so i am not able to go in recovery.
http://forum.xda-developers.com/showthread.php?t=1609190
this will defiantly help
This'll help even more. It will reboot your phone over and over again and it will eventually charge.
http://forum.xda-developers.com/showthread.php?t=1658084&highlight=batch
Sent from my One X
Stiill not get it
The5alodi said:
http://forum.xda-developers.com/showthread.php?t=1609190
this will defiantly help
Click to expand...
Click to collapse
The psot is good but not work for me the main problem is still there: when ever i connect it to pc the cell phone remain on for 30 sec and then restart.I put it charge for long time but still it sucks. i try to unlock boot loader and image recovery the message display in cmd " remote device low battery". I attached the image please see.
syed124 said:
The psot is good but not work for me the main problem is still there: when ever i connect it to pc the cell phone remain on for 30 sec and then restart.I put it charge for long time but still it sucks. i try to unlock boot loader and image recovery the message display in cmd " remote device low battery". I attached the image please see.
Click to expand...
Click to collapse
leave it on the bootloader to charge
Leaving it in the bootloader will drain the phone, it does not charge there.
Use the bat script in the right way ? Place this
http://db.tt/aLqeTpPO
In the fastboot folder on the pc, put the phone in the bootloader/fastboot usb mode
Right click the .bat file and select it to run as administrator ! That's the only way to charge the batt up. Leave it for an hour and you should be able to unlock it and flash a custom recovery from where you can charge the up to more power
Thanks and whta next dear
TToivanen said:
This'll help even more. It will reboot your phone over and over again and it will eventually charge.
http://forum.xda-developers.com/showthread.php?t=1658084&highlight=batch
Sent from my One X
Click to expand...
Click to collapse
Thank u it's work for me i am in recovery mode and unlock as i indicated above the detail of my HOX. what should i do next i have ARHD18.1 zip and CWN super-su v0.87 zip on my sd. But why it stuck on quitely brilliant screen. detail is as follow
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.39.0000
CPLD-None
MICROP-None
RADIO-5.1204.162.29
eMMC-bootmode: disabled
CPU-bootmode : disabled
HW SECURE BOOT : ENABLE
MODE PATH : OFF
DEC 17 2012, 13:59:37
Don't touch the supersu.zip, it is unnecessary.
1. Wipe/factory reset
2. Flash the ARHD.zip
3. Flash the boot.img from the ARHD.zip "fastboot flash boot boot.img"
Yep the rom is pre rooted so you can skip that
TToivanen said:
Don't touch the supersu.zip, it is unnecessary.
1. Wipe/factory reset
2. Flash the ARHD.zip
3. Flash the boot.img from the ARHD.zip "fastboot flash boot boot.img"
Click to expand...
Click to collapse
Yesterday i do the same but i stuck on screen. please see the details above about h-boot an d radio. Should i need to install firmware and kindly will you be please specific. will be great full to you.
I am Confuse
Mr Hofs said:
Yep the rom is pre rooted so you can skip that
Click to expand...
Click to collapse
How to charge in recovery and secondly how to fast boot after flashing with ARHD confuse
You flashed cwm recovery 5.4.8.0 ? If you are in the recovery and you see the led burning is okey, of not leave the cable on the phone and on the pc and reboot the recovery
Like fastboot command but instead fastboot you type
Adb reboot recovery
It reboots the recovery and the led should go on !
And if you want to go to the bootloader from the recovery you type
Adb reboot bootloader
syed124 said:
Yesterday i do the same but i stuck on screen. please see the details above about h-boot an d radio. Should i need to install firmware and kindly will you be please specific. will be great full to you.
Click to expand...
Click to collapse
No need to flash firmware.
syed124 said:
How to charge in recovery and secondly how to fast boot after flashing with ARHD confuse
Click to expand...
Click to collapse
1. Download HTC drivers and install them. Choose one of the following 32 BIT 64 BIT
2. Download the attached fastboot files. Extract them to a folder on your PC where they are easily accessible.
3. Extract the boot.img from ARHD.zip to the folder too.
4. Hold SHIFT and click RIGHT mouse button anywhere in that folder. Select "open command prompt here".
5. Type
Code:
fastboot flash boot boot.img
and
Code:
fastboot erase cache
How to charge in recovery
TToivanen said:
No need to flash firmware.
1. Download HTC drivers and install them. Choose one of the following 32 BIT 64 BIT
2. Download the attached fastboot files. Extract them to a folder on your PC where they are easily accessible.
3. Extract the boot.img from ARHD.zip to the folder too.
4. Hold SHIFT and click RIGHT mouse button anywhere in that folder. Select "open command prompt here".
5. Type
Code:
fastboot flash boot boot.img
and
Code:
fastboot erase cache
Click to expand...
Click to collapse
sir actually i charge my battery to 3.68 to unlock the boot. my cell phone battery is still down. i wipe data and factory set. and flash with ARHD18.1 it,s complete and says fully done. but when i do the command as u mention above it's says remote battery low. my question is how i put my HOX in recovery charging that i can get cell charge to perform the above commands u said. remember i out my cell phone in batch command charging so right know it is 3580mv. kindly give me the procedure that i put cell in recovery charging and kindly tell me what happen when me flash battery status option in recovery.
Just boot to recovery and it should charge. The led will not light but it does charge.
You can use the batch script too if you want.
Sent from my One X
TToivanen said:
Just boot to recovery and it should charge. The led will not light but it does charge.
You can use the batch script too if you want.
Sent from my One X
Click to expand...
Click to collapse
Last night i boot into recovery and put my cell phone on charge but it's not charge battery is as usuall low. i am running with clockwork mood recovery v5.8.2.7. In reccovery it remain own for some time than powerd off but not charging.
syed124 said:
Last night i boot into recovery and put my cell phone on charge but it's not charge battery is as usual low. i am running with clockwork mood recovery v5.8.2.7. In recovery it remain own for some time than powered off but not charging.
Click to expand...
Click to collapse
I get it i am running lin low recovery 5.8.2.7. can you tell me how much battery is require to run cwm 5.8.4. and how to charge my HoX to get the battery of desired level please help. i am trying it from 4 days and i am getting sick. i am really sick. headache and running in fever. so please can you guide me will be really really grateful to you.
use this batch
http://db.tt/aLqeTpPO
Place it in the fastboot folder and put the phone in fastboot usb mode and then run the .bat file.
It will continuously reboot the phone and charge it little by littl, leave it like that for an hour or so and then flash this recovery
http://db.tt/Krlm4dPs
Sent from my HTC One X using xda premium
Im sorry if this has been answered so many times but ive spent about 4 hours looking around and i couldnt understand half of the solutions that were out there. My problem is that i attempted to root my htc one x and i succeeded. Then i tried to put the new jellybean 4.2.2 cyanogen10.1 mod nightlies or something like that. This failed terribly. I have no back ups or anything what so ever. I dont care about anything i may have lost, i only want to get the phone working again. I know i should have researched this further before trying, but yeah... if anybody has done the same thing and solved there matter i'd be so grateful. it still responds on fastboot. heres some info on the bootloader screen. I tried factory resetting it, clearing the cache...none worked.
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.39.0000
CPLD-None
MICROP-None
Radio-5.1204.164.30H
eMMC-bootmode:disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
Dec 17 2012,13:59:37
Did you flash the boot.img from the CM10.1 rom ?
Mr Hofs said:
Did you flash the boot.img from the CM10.1 rom ?
Click to expand...
Click to collapse
well not sure what you mean but i did put the boot.img in the same folder with the adb stuff and attempted to reboot it on fastboot but the same thing happened.
Phone in the bootloader and flash the boot.img
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Did you do that from the command window on the pc ?
Mr Hofs said:
Phone in the bootloader and flash the boot.img
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Did you do that from the command window on the pc ?
Click to expand...
Click to collapse
yes however i only did the fastboot erase cache once not after the the second command. Also i wiped all the date on recovery mode. should i try the commands above again? sorry if im being a pain
Best to do is :
Full wipe in the recovery ! Then install the CM10.1 rom and directly the GAPPS. don't reboot but type in the command window
Adb reboot bootloader
Then flash the boot.img and reboot
Mr Hofs said:
Best to do is :
Full wipe in the recovery ! Then install the CM10.1 rom and directly the GAPPS. don't reboot but type in the command window
Adb reboot bootloader
Then flash the boot.img and reboot
Click to expand...
Click to collapse
thanks but how do i install the cm10.1 and gapps when i cant enter my phones mass storage on pc.
Mount is a usb drive in the recovery
Mr Hofs said:
Mount is a usb drive in the recovery
Click to expand...
Click to collapse
okay ive installed the clockwork mod and im trying to enter the phones sotrage on pc, but i cant seem to do it. which option is it. mount/sdcard and mount/usb storage dont work
What recovery do have ? Version number ?
https://www.dropbox.com/s/guvfqd7tp8acxg6/recovery 5.8.4.0.img
Flash this one and go to mounts and storage and tap the last option in the list
Please help me..
Hi, same problem here..
my phone got stuck on the startup screen (HTC quietly brilliant). But my case is different because im a total noob, newly registered here. I bought my htc one x that is already in CM10 jellybean mode. last night i got a notification for cm10 update, I just click it without thinking much (cause im a noob) then after rebooting it just freezes... I hope senior members here can help me, i reallly dont want to lose my data..
You probably updated to CM10.1. You need to take the update's boot.img and flash it in fastboot.
Sent from my One X using xda premium
TToivanen said:
You probably updated to CM10.1. You need to take the update's boot.img and flash it in fastboot.
Sent from my One X using xda premium
Click to expand...
Click to collapse
many thanks for replying me..
sorry but im totally clueless at this point, i spent all night reading posts, watching videos.. i've seen the same advice (flash boot.img in fastboot) in several places, but still dont know how to do it .. I would be very very grateful if someone can guide me step by step to do this
You place the boot.img file from the CM10 rom.zip (its inside) in the fastboot folder on the pc, then you put the phone in the bootloader
Open the command window in the fastboot folder(point in the fastboot folder hold down shift + right mouse button- open command window here) and type
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Mr Hofs said:
You place the boot.img file from the CM10 rom.zip (its inside) in the fastboot folder on the pc, then you put the phone in the bootloader
Open the command window in the fastboot folder(point in the fastboot folder hold down shift + right mouse button- open command window here) and type
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Click to expand...
Click to collapse
Does it usually took a long time for every command to complete? im entering fastboot erase cache and <waiting for device> appear and its still there right now..
just to be sure, the bootloader mode is when the HBOOT is highlighted blue am i right?
oh i hate myself..
It should say
Fastboot usb in red text above that
In bootloader you should highlight fastboot using volume keys and press power. Then fastboot mode should be engaged and FASTBOOT USB text visible.
Sent from my One X using xda premium
Mr Hofs said:
It should say
Fastboot usb in red text above that
Click to expand...
Click to collapse
now i have fastboot usb in red and "<waiting for devices>" still there. any thoughts?? does this mean the PC doesn't recognize my phone or it I should wait longer?
Do you have HTC syncmanager installed on the pc ? Uninstall it but leave the drivers when asked !
Reboot the pc and the bootloader....check again.
And you should have a myhtc in the device manager when the phone is plugged in the pc
Mr Hofs said:
What recovery do have ? Version number ?
https://www.dropbox.com/s/guvfqd7tp8acxg6/recovery 5.8.4.0.img
Flash this one and go to mounts and storage and tap the last option in the list
Click to expand...
Click to collapse
i have version 5.8.4.0, i went to the last option and it still does not come up on the pc
Ok so got the htc one x off Craigslist. One click Rooted it. So I wanted to change the boot up logo to tmobile. So I flashed a zip file called "flash boot" then it restarted to the GCI logo and sits there..... I tried going to hboot and it says sd failed. Ummm I did factory restore and erase cache and erase . I'm now looking into the whole RUU thing but I can't find any LInkS to a RUU file.
Here's what it says in recover screen
***unlocked***
Endeavors pvt ship s-on rl
Hboot o.43.0000
Cplld-none
Microp-none
Radio-none
Emmc-bootmode: disabled
CPU: bootmode disabled
Hw secure boot: enable
Modem path : off
March 17 2012
In fastboot under hboot when connected to computer it says:
Failed to open USB master mode
Please plug USB off.
So I'm not able to connect to the computer to load files
Update: my computer recognize my phone as a cd drive(d
Then I get the windows is installing drives message in the bottom right and says failed. "htc mtp device failed"
Learn fastboot commands, post back this command output
Fastboot getvar version-main
sent from my .......
.? So learn fast boot commands? Ok then after I learn fast boot commands what do you want me to post?
The outcome of that command
Some reading material
http://forum.xda-developers.com/showthread.php?t=1832891
sent from my .......
Do you think I will be able to use commands even if it boot up to just my carriers logo? I can get into recovery but the problem is when you go into fastboot and hboot while connected to the computer it says failed to load USB master. But my device still shows up on my notebook as a cd-rom drive (d
Commands are done with the phone in the bootloader. The usb master fail error is only because you enter the bootloader with the usb cable plugged in !
sent from my .......
And please do not make multiple threads, @Mr Hofs was already trying to help you in this thread and you started another one this morning, stick with this thread and forget the other
Yea, or stay there and then i am out
Fastboot commands :
Download android sdk bundle and unpack it to a specific folder, open the platform tools subfolder. Point with the mouse in that folder and hold down shift. Then right click the mouse and select
Open command window here
Then put the phone in the bootloader so you see "fastboot usb" in red text on the phone.
Then type this in the command window
Fastboot getvar version-main
sent from my .......
Mr Hofs said:
Yea, or stay there and then i am out
Fastboot commands :
Download android sdk bundle and unpack it to a specific folder, open the platform tools subfolder. Point with the mouse in that folder and hold down shift. Then right click the mouse and select
Open command window here
Then put the phone in the bootloader so you see "fastboot usb" in red text on the phone.
Then type this in the command window
Fastboot getvar version-main
sent from my .......
Click to expand...
Click to collapse
I did that and it showed:
Version-main: 1.26.401.2
Finished. Total time 0.010s
Download via this thread the full ruu's
1.29.401
2.17.401
3.14.401.31
http://forum.xda-developers.com/showthread.php?t=2094113
Relock the bootloader and execute the 2.17 ruu.exe from the pc with admin rights......it should flash the phone to full stock ICS rom. Not sure if it works directly therefore i noted the 1.29.401 too. But run the 2.17 first.
sent from my .......
Mr Hofs said:
Download via this thread the full ruu's
1.29.401
2.17.401
3.14.401.31
http://forum.xda-developers.com/showthread.php?t=2094113
Relock the bootloader and execute the 2.17 ruu.exe from the pc with admin rights......it should flash the phone to full stock ICS rom. Not sure if it works directly therefore i noted the 1.29.401 too. But run the 2.17 first.
sent from my .......
Click to expand...
Click to collapse
Ok I get run the 2.17 file on my computer in fastboot mode....before that how do I relock the boot loader before I start this process?
Fastboot oem lock
That's the command
sent from my .......
Mr Hofs said:
Fastboot oem lock
That's the command
sent from my .......
Click to expand...
Click to collapse
Great! Now just one more thing sorry. But there is a list about 50 ruu's from that link you provided. Several say 2.17.401. Like one says htc Asia, htc Europe, orange uk. So the question would be which 2.17.401.x-x.xx.xxx I would use?
noob_2010 said:
Great! Now just one more thing sorry. But there is a list about 50 ruu's from that link you provided. Several say 2.17.401. Like one says htc Asia, htc Europe, orange uk. So the question would be which 2.17.401.x-x.xx.xxx I would use?
Click to expand...
Click to collapse
The one with 401 thats your phones region. If 2.17.401 wont work try 3.14.401
3.14 won't work instantly, you have to be on 2.17.401 before the 3.14 works
And there is no Asia 2.17.401....... 401 is Europe only ! Asia is 707, read carefully ......
sent from my .......
Mr Hofs said:
3.14 won't work instantly, you have to be on 2.17.401 before the 3.14 works
And there is no Asia 2.17.401....... 401 is Europe only ! Asia is 707, read carefully ......
sent from my .......
Click to expand...
Click to collapse
Thanks, I'm at a halt right now I'm getting the battery is lower than %30 so I have to find a good way to charge it before I go to sleep tonight. So in the morning I'm going try to run the 1.29 ruu exe. Then as a bonus I'm gonna try install clockworkmod through fastboot with windows.
noob_2010 said:
Thanks, I'm at a halt right now I'm getting the battery is lower than %30 so I have to find a good way to charge it before I go to sleep tonight. So in the morning I'm going try to run the 1.29 ruu exe. Then as a bonus I'm gonna try install clockworkmod through fastboot with windows.
Click to expand...
Click to collapse
What recovery do you have ? Go in there and it charges the batt !
And after the 1.29 you still have a long way to go to update the phone !
1.29-2.17, 2.17-3.14, 3.14-3.20, 3.20-4.18 !
sent from my .......
Mr Hofs said:
What recovery do you have ? Go in there and it charges the batt !
And after the 1.29 you still have a long way to go to update the phone !
1.29-2.17, 2.17-3.14, 3.14-3.20, 3.20-4.18 !
sent from my .......
Click to expand...
Click to collapse
Omg this was a big waste of time I fresking left the phone on my carriers screen thought it was charging. I woke up this morning the phone was off. Now I'm getting the battery is low message. Smh
I can't go into recovery it sends me back to the fastboot menu I can only select recovery then it sends me back to fastboot/hboot.
Then when i let the phone boot to my carriers screen I get the installing drivers message. Then it says failed - htc mtp device
Oke put the phone in fastboot mode and run this script with admin rights on the pc from the fastboot folder
https://db.tt/aLqeTpPO
It will continuously reboot the bootloader and charge the phone bit by bit. Leave til it reaches round 3800 mV .....then enter the recovery and charge it more in there
What recovery do you have exactly ?
sent from my .......
Mr Hofs said:
Oke put the phone in fastboot mode and run this script with admin rights on the pc from the fastboot folder
https://db.tt/aLqeTpPO
It will continuously reboot the bootloader and charge the phone bit by bit. Leave til it reaches round 3800 mV .....then enter the recovery and charge it more in there
What recovery do you have exactly ?
sent from my .......
Click to expand...
Click to collapse
Ummm I think it's stock recovery. When I had access to clockworkmod it just goes into a black screen. I'm saying stock recovery because when I went to the android store and downloaded clockworkmod it couldn't my device for clockworkmod. So I believe it's just stock recovery