[Q] many problems - Desire Q&A, Help & Troubleshooting

Hello,
my HTC desire has been rooted for like 8 months or so, with Oxygen 2.3.2 ROM installed. Yesterday i had my first problem, my apps began to freeze, and it ended up that my hole phone were froozen. I pulled my battery in and out, nothing happened.
I went into recovery and made a factoery reset, and wiped everything i could (i have read, that it was a good idea) and when i turned my phone up again, i realised that i had deleted my ROM on the phone...
So again... i went in to recovery and tryed to flash my ROM again, but i ran into a problem:
Code:
E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(No such file or directory)
E:Can't mount /sdcard
after i googled and tryed for like an hour and a half, i got it fixed with
Code:
cd C:\android-sdk-windows\platform-tools
fastboot oem enableqxdm 0
fastboot oem eraseconfig
and as i remember i took my batteri out again, and placed my memery-card into my computer, moved my ROM (oxygen 2.3.2) over again. So i tryed to get into recovery, but now it wont get in there, after i press the POWER-button on "Recovery" it just stocks on the HTC load screen, i left it that way the hole night, and when i woke up, nothing was happened...
i pulled my battery out, and now i got some problems just booting up to fastboot/hboot to.
so the problems now:
problems getting into RECORVERY
Sometimes problems booting to HBOOT/FASTBOOT
If you need any information, please tell me so
PS: Im sorry if my english is kind of bad

You should try flashing a new recovery image via fastboot once you get there. That worked for me when i couldnt enter recovery.
Sent from my HTC Runnymede using XDA App

according to....
EvertorN said:
You should try flashing a new recovery image via fastboot once you get there. That worked for me when i couldnt enter recovery.
Sent from my HTC Runnymede using XDA App
Click to expand...
Click to collapse
according to: theunlockr.com/2009/10/15/how-to-flash-a-new-recovery-image-if-you-are-already-rooted i need to get into the phone and download an app, and i dont got a ROM installed, i kind of deleted it in a way

magnuskahr said:
according to: theunlockr.com/2009/10/15/how-to-flash-a-new-recovery-image-if-you-are-already-rooted i need to get into the phone and download an app, and i dont got a ROM installed, i kind of deleted it in a way
Click to expand...
Click to collapse
I assume you are S-OFFed so just download a recovery.img file of your recovery, boot into fastboot and flash via fastboot utility your recovery.img file like 'fastboot flash recovery path\to\recovery.img'
Goodluck!

USB functions are working? (Mount/debuging)

alexei_kom said:
I assume you are S-OFFed so just download a recovery.img file of your recovery, boot into fastboot and flash via fastboot utility your recovery.img file like 'fastboot flash recovery path\to\recovery.img'
Goodluck!
Click to expand...
Click to collapse
I'm S-ON, will this help:?
http://forum.xda-developers.com/showthread.php?t=1275632
"I'm S-ON, I can't boot recovery, and my phone doesn't boot "
This is a bit of a worse situation, as you cannot flash system critical parts such as the recovery image and just restore a backup. This unfortunately means that you will lose all of your data when you attempt to fix the phone.
[STEP1]- Make sure that you have a goldcard. If not, create one from the tutorial.
[STEP2]- Battery pull. Hold the BACK button and the POWER button to boot into FASTBOOT mode.
[STEP3]- Download the latest WWE RUU from here
[STEP4]- Run the RUU and wait for completion WARNING: DO NOT, BY ANY CIRCUMSTANCES INTERRUPT THE PROCESS - THIS WILL MORE THAN LIKELY END UP WITH A BRICKED PHONE - NOT EVEN IF GOD HIMSELF TELLS YOU TO DO SO, OR IF THE US PRESIDENT THREATENS YOU WITH THERMO-NUCLEAR WAR
[STEP5]- Once the phone is booted, you are now returned completely to stock. You will need to re-root again, and I'd recommend S-OFF
Click to expand...
Click to collapse

name.vic said:
USB functions are working? (Mount/debuging)
Click to expand...
Click to collapse
i dont remember, im in school and was stupid enough not to take the desire with me, i will test later when i come home

What is the hboot version?

name.vic said:
What is the hboot version?
Click to expand...
Click to collapse
Again, when i come home i will tjeck it
so in about 4 hours

My freind got the Desire too, and it's as old as mine, and we rooted our phones from the same tutorial.. so i gesh we got the same hboot version??
here is his hboot (as i remember, i got the same) HBOOT-0.93.0001

magnuskahr said:
I'm S-ON, will this help:?
http://forum.xda-developers.com/showthread.php?t=1275632
Click to expand...
Click to collapse
Are you sure you are S-ON? Because you can't perform these
fastboot oem enableqxdm 0
fastboot oem eraseconfig
Click to expand...
Click to collapse
if you are S-ON...
Post here your phone specs while in hboot...

last i checked i was on S-ON, i dont know if that were those commands which helped me (but it think it was)

but i will make sure about it, when i get home

now writing what is on the fastboot screen:
BRAVO PVT1 SHIP S-ON
HBOOT-0.93.0001
TOUCH PANEL-SYN0101
RADIO-5.11.05.27
Aug 10 2010, 17:52:18
FASTBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
BOOTLOADER
REBOOT
REBOOT BOOTLOADER
POWER DOWN

name.vic said:
USB functions are working? (Mount/debuging)
Click to expand...
Click to collapse
My pc is making a sound when i connect it, but it wont find the hdd, but i can run
Code:
fastboot oem boot
and the phone boots and stucks and the android-skatbording-screen

i just ran
Code:
fastboot reboot
the phone shut down, and i cant turn it on... any ideas?

magnuskahr said:
i just ran
Code:
fastboot reboot
the phone shut down, and i cant turn it on... any ideas?
Click to expand...
Click to collapse
SLCD brick?
Try to pull the battery, power on + back (this will get you into fastboot), wait about 10-20 seconds, then connect it to usb. In fastboot utility type 'fastboot devices' and see if it detects your phone. If it does, run an RUU.

Jep i tryed pull the battery out, i can still not turn it on

magnuskahr said:
Jep i tryed pull the battery out, i can still not turn it on
Click to expand...
Click to collapse
If you are SLCD bricked you won't see anything on your screen. Read the previous post I wrote...

i guess that "fastboot utility" is cmd right??
if that so, nothing happend

Related

[Q]Too many issues?

First of all I'm new to this forum so Hello! second of all I'm also new to rooting and custom ROM's.
So today after 3 days of trying to unlock my HTC One X by htcdev.com i finally submitted my identifier token and i got the Unlock_code.bin
I downloaded Android Revolution HD 18.1, I also downloaded the CWM v5.8.4.0 and installed it on my phone.
After that i followed the instructions on how to install the Revolution HD 18.1, after doing all the steps on my phone it told me it was succesfully installed and i had to reboot the system. So i did it, then the part comes where i'm getting stuck. It was rebooting my htc , and it wouldn't go further then the opening screen HTC quietly brilliant it was stuck there. trying to put my phone on and off and on and off, same problem. Now i can only go in the boot-loader menu and in recovery menu and that's it. I re-lock my phone again to update firmware. NOW I HAVE ONLY ACESS TO BOOT MENU AND BATTERY IS ALSO NOT CHARGING I PUT IT ON CHARGING FOR 5, 6 HOURS. WHEN EVER I TRY TOO UNLOCK BOOT LOADER IT SAYS BATTER LOW
I did a lot of research on how to fix my problem, unfortunately nothing helped. (Maybe cuz I'm a noob and new to this)
I tried almost every thing but nothing help
Can someone please help me with this, i've been trying it all day now and i'm giving up the hope.
Some information at the hboot menu of my HTC one X
SHIP S-ON RL
HBOOT-1.31
CPLD-None
MICROP-None
RADIO-2.1204.135.20
eMMC-bootmode: disabled
CPU-bootmode : disabled
1. How to charge my HOX battery as it remain low after long time charging and not allow me to do anything.
2. Before ARHD 18.1 i am running with rom skydragon. please help
Sorry about some information i post above my cell phone is hardly on for10 or 15 sec so i put some information as i remember now here is the exact information.
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.39.0000
CPLD-None
MICROP-None
RADIO-5.1204.162.29
eMMC-bootmode: disabled
CPU-bootmode : disabled
HW SECURE BOOT : ENABLE
MODE PATH : OFF
DEC 17 2012, 13:59:37
If any one from you guys help me will appreciate.
My phone is rooted but re lock. so i am not able to go in recovery mood. and phone directly go too fast boot mood.
Secondly it is not charging i put it on charging for long time the red led light is not stable and continue blinking. So i am not able to run any command as it say : Battery level is too low to flash. before flashing with ARHD 18.1 battery is normal. please help. I am so sick of any one come with good recommendation. Regards in advanced.
flash the boot.img witch came with your rom zip charge your battery in recovery
thanks if i helpped
too flash the boot img go to bootloader then fastboot
and put the boot.img from the rom zip to the fastboot folder and type
'fastboot flash boot boot.img'
then 'fastboot erase cache'
then it should work fine
thank me if i helped
How to charge in recovery
The5alodi said:
flash the boot.img witch came with your rom zip charge your battery in recovery
thanks if i helpped
too flash the boot img go to bootloader then fastboot
and put the boot.img from the rom zip to the fastboot folder and type
'fastboot flash boot boot.img'
then 'fastboot erase cache'
then it should work fine
thank me if i helped
Click to expand...
Click to collapse
Dear i put cell on charging for long time but when i switched it red line say fast mode low battery status. when ever i try to run any command it says. Failed.( remote battery low). my device is rooted but its relocked so i am not able to go in recovery.
http://forum.xda-developers.com/showthread.php?t=1609190
this will defiantly help
This'll help even more. It will reboot your phone over and over again and it will eventually charge.
http://forum.xda-developers.com/showthread.php?t=1658084&highlight=batch
Sent from my One X
Stiill not get it
The5alodi said:
http://forum.xda-developers.com/showthread.php?t=1609190
this will defiantly help
Click to expand...
Click to collapse
The psot is good but not work for me the main problem is still there: when ever i connect it to pc the cell phone remain on for 30 sec and then restart.I put it charge for long time but still it sucks. i try to unlock boot loader and image recovery the message display in cmd " remote device low battery". I attached the image please see.
syed124 said:
The psot is good but not work for me the main problem is still there: when ever i connect it to pc the cell phone remain on for 30 sec and then restart.I put it charge for long time but still it sucks. i try to unlock boot loader and image recovery the message display in cmd " remote device low battery". I attached the image please see.
Click to expand...
Click to collapse
leave it on the bootloader to charge
Leaving it in the bootloader will drain the phone, it does not charge there.
Use the bat script in the right way ? Place this
http://db.tt/aLqeTpPO
In the fastboot folder on the pc, put the phone in the bootloader/fastboot usb mode
Right click the .bat file and select it to run as administrator ! That's the only way to charge the batt up. Leave it for an hour and you should be able to unlock it and flash a custom recovery from where you can charge the up to more power
Thanks and whta next dear
TToivanen said:
This'll help even more. It will reboot your phone over and over again and it will eventually charge.
http://forum.xda-developers.com/showthread.php?t=1658084&highlight=batch
Sent from my One X
Click to expand...
Click to collapse
Thank u it's work for me i am in recovery mode and unlock as i indicated above the detail of my HOX. what should i do next i have ARHD18.1 zip and CWN super-su v0.87 zip on my sd. But why it stuck on quitely brilliant screen. detail is as follow
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.39.0000
CPLD-None
MICROP-None
RADIO-5.1204.162.29
eMMC-bootmode: disabled
CPU-bootmode : disabled
HW SECURE BOOT : ENABLE
MODE PATH : OFF
DEC 17 2012, 13:59:37
Don't touch the supersu.zip, it is unnecessary.
1. Wipe/factory reset
2. Flash the ARHD.zip
3. Flash the boot.img from the ARHD.zip "fastboot flash boot boot.img"
Yep the rom is pre rooted so you can skip that
TToivanen said:
Don't touch the supersu.zip, it is unnecessary.
1. Wipe/factory reset
2. Flash the ARHD.zip
3. Flash the boot.img from the ARHD.zip "fastboot flash boot boot.img"
Click to expand...
Click to collapse
Yesterday i do the same but i stuck on screen. please see the details above about h-boot an d radio. Should i need to install firmware and kindly will you be please specific. will be great full to you.
I am Confuse
Mr Hofs said:
Yep the rom is pre rooted so you can skip that
Click to expand...
Click to collapse
How to charge in recovery and secondly how to fast boot after flashing with ARHD confuse
You flashed cwm recovery 5.4.8.0 ? If you are in the recovery and you see the led burning is okey, of not leave the cable on the phone and on the pc and reboot the recovery
Like fastboot command but instead fastboot you type
Adb reboot recovery
It reboots the recovery and the led should go on !
And if you want to go to the bootloader from the recovery you type
Adb reboot bootloader
syed124 said:
Yesterday i do the same but i stuck on screen. please see the details above about h-boot an d radio. Should i need to install firmware and kindly will you be please specific. will be great full to you.
Click to expand...
Click to collapse
No need to flash firmware.
syed124 said:
How to charge in recovery and secondly how to fast boot after flashing with ARHD confuse
Click to expand...
Click to collapse
1. Download HTC drivers and install them. Choose one of the following 32 BIT 64 BIT
2. Download the attached fastboot files. Extract them to a folder on your PC where they are easily accessible.
3. Extract the boot.img from ARHD.zip to the folder too.
4. Hold SHIFT and click RIGHT mouse button anywhere in that folder. Select "open command prompt here".
5. Type
Code:
fastboot flash boot boot.img
and
Code:
fastboot erase cache
How to charge in recovery
TToivanen said:
No need to flash firmware.
1. Download HTC drivers and install them. Choose one of the following 32 BIT 64 BIT
2. Download the attached fastboot files. Extract them to a folder on your PC where they are easily accessible.
3. Extract the boot.img from ARHD.zip to the folder too.
4. Hold SHIFT and click RIGHT mouse button anywhere in that folder. Select "open command prompt here".
5. Type
Code:
fastboot flash boot boot.img
and
Code:
fastboot erase cache
Click to expand...
Click to collapse
sir actually i charge my battery to 3.68 to unlock the boot. my cell phone battery is still down. i wipe data and factory set. and flash with ARHD18.1 it,s complete and says fully done. but when i do the command as u mention above it's says remote battery low. my question is how i put my HOX in recovery charging that i can get cell charge to perform the above commands u said. remember i out my cell phone in batch command charging so right know it is 3580mv. kindly give me the procedure that i put cell in recovery charging and kindly tell me what happen when me flash battery status option in recovery.
Just boot to recovery and it should charge. The led will not light but it does charge.
You can use the batch script too if you want.
Sent from my One X
TToivanen said:
Just boot to recovery and it should charge. The led will not light but it does charge.
You can use the batch script too if you want.
Sent from my One X
Click to expand...
Click to collapse
Last night i boot into recovery and put my cell phone on charge but it's not charge battery is as usuall low. i am running with clockwork mood recovery v5.8.2.7. In reccovery it remain own for some time than powerd off but not charging.
syed124 said:
Last night i boot into recovery and put my cell phone on charge but it's not charge battery is as usual low. i am running with clockwork mood recovery v5.8.2.7. In recovery it remain own for some time than powered off but not charging.
Click to expand...
Click to collapse
I get it i am running lin low recovery 5.8.2.7. can you tell me how much battery is require to run cwm 5.8.4. and how to charge my HoX to get the battery of desired level please help. i am trying it from 4 days and i am getting sick. i am really sick. headache and running in fever. so please can you guide me will be really really grateful to you.
use this batch
http://db.tt/aLqeTpPO
Place it in the fastboot folder and put the phone in fastboot usb mode and then run the .bat file.
It will continuously reboot the phone and charge it little by littl, leave it like that for an hour or so and then flash this recovery
http://db.tt/Krlm4dPs
Sent from my HTC One X using xda premium

[Q] Fix Bootloop with RUU?

Hey guys.
Couldn't find any other posts so I'm hoping I'm not breaking any rules.
Yes, I'm a n00b. Was handed down an old Desire Z still using Froyo and decided to install Cyanogenmod.
My attempted install didn't get past rooting for reasons unbeknownst to me. I used CM's guide: Installing CM for Vision. I got stuck at Rooting the Desire Z.
I followed it to the letter and made it to step 10. Upon reboot the phone reaches "HTC - quietly brilliant" and sounds it's little jingle. Goes black after a while and plays the jingle/logo again. And again. And again. I have to remove the battery to get it quiet again. I can make it to HBOOT and the screen displays (beware verbosity):
Vision PVT ENG S-OFF
HBOOT-0.84.2000 (PC10*****)
MICROP-0425
RADIO-26.03.02.18_M3
eMMC-boot
Sep 8 2010, 15:56:38
HBOOT
<VOL UP> to previous item
<VOL DOWN. to next item
<POWER. to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
SYSTEM INFO
IMAGE CRC
I believe the guide I followed installed a custom recovery image. Clockwork Recovery? Accessing RECOVERY results in a quick buzz with HTC logo and a prompt return to FASTBOOT. FACTORY RESET yields the same result. SIMLOCK comes up with "SD init fail !!! Process done, reboot device?" SYSTEM INFO comes up with what the title hints. I'll list if need be. IMAGE CRC comes up with checksums:
hboot: 0x2A125CF4
boot: 0xF7629548
recovery: 0x3921C16D
system: 0xD5CE705B
That's about as far as I can get from concise.
I've downloaded an RUU for it, have the Android SDK and Odin.
I'm not sure if the RUU will fix anything or how to install it. So my question is, how do I get my phone booting again?
Any feedback would be very appreciated.
you used THIS GUIDE? step ten is to check if gfree worked, did it? you didnt need to reboot first to check
anyway looking at your current spl i believe you should be fine, just flash a custom recovery in fastboot - download from CM SITE and check md5
cbc776e7941ebf030e9fa39473d5b6f1
Click to expand...
Click to collapse
then boot into fastboot mode and have phone connected to pc
open a cmd in the location of fastboot.exe and type type
fastboot devices
Click to expand...
Click to collapse
if you see yours then all is good, if not then you need to set up fastboot.exe (odin is only for sammy)
then type
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
and then
fastboot reboot-bootloader
Click to expand...
Click to collapse
once rebooted
adb reboot recovery
Click to expand...
Click to collapse
now youll be in clockwork and flash a rom from there (i suggest looking into 4ext recovery)
oh and for the above to work you need to change name of recovery you downloaded to recover.img, also need to have changed your path in environmental variables or have the image in same folder as fastboot.exe is in
Thanks!
Thanks so much I owe you big-time. And thanks for the quick reply.
I followed your instructions, got Clockwork up, factory reset, got stock firmware back up and flashed Cyanogenmod and it's all running fine now. (I did have to Cyanogenmod twice) I'll be sure to take a look at 4EXT. Thanks again.

adb/fastboot and constantly rebooting

I was trying to look what was installed on a friend's HTC Desire, so I used "adb reboot bootloader", and only used "fastboot devices" to make sure it sees the smartphone. I left it connected for some time while I was looking for some things related to installing a custom firmware and it got hot. I have a HTC Hero and I had it gone hotter and nothing happened, but after I restarted this HTC Desire it kept restarting continously after it played the HTC animation. I can still get into the bootloader/recovery, but that's kind about it, nothing more. Should I just wait for it to cool down, or I might just bricked it?
<<Update>>
It's been more than 8 hours and the smartphone still does this. The thing is the volume buttons are broken, I only have fastboot control over it. The only solution that came to my mind was to flash it with a Touch ROM, but I can't find a fastboot command to restart directly into recovery, I can only get into the bootloader/fastboot. Does anybody have an idea on how to get directly to recovery from fastboot?
Well, in fasboot you select "bootloader", then recovery.
abaaaabbbb63 said:
Well, in fasboot you select "bootloader", then recovery.
Click to expand...
Click to collapse
I can't do that because the volume buttons are broken, so I can't select anything.
cata3092 said:
I can't do that because the volume buttons are broken, so I can't select anything.
Click to expand...
Click to collapse
Is the phone s-off or unlocked?
It's S-OFFed
cata3092 said:
It's S-OFFed
Click to expand...
Click to collapse
Download the 4ext recovery.img on your PC. Then boot the phone into fastboot and run the following command:
Code:
fastboot boot recovery.img
It worked, now the phone it's fully functional (except the volume buttons of course) .
I used the following steps:
1. fastboot boot recovery.img
2. wipe both types of data
3. went to advanced menu and used the other type of wipe (dalvanic or something).
Thanks .

7 vibrations but I can get to hboot and green htc splach screen

Hi there
I have an HTC inspire 4G and I'm trying to install a rom on it just to get to work :/
And I've already fixed hboot problem thanks to chrisb906 and I tried several RUUs and it doesn't seem to work even if they are successfully installed!
If I boot it normally I get : 1 vibration > htc green splach screen > 2~3 secs later > 7 vibrations > black screen > nothing!
here is what I get in HBOOT
***UNLOCKED***
ACE PVT SHIP S-OFF RL
HBOOT-2.00.0030
MICROP-0438
RADIO-26.10.04.03_M
eMMC-boot
Feb 20 2012,16:03:18
Help me please if you can
midi_1996 said:
Hi there
I have an HTC inspire 4G and I'm trying to install a rom on it just to get to work :/
And I've already fixed hboot problem thanks to chrisb906 and I tried several RUUs and it doesn't seem to work even if they are successfully installed!
If I boot it normally I get : 1 vibration > htc green splach screen > 2~3 secs later > 7 vibrations > black screen > nothing!
here is what I get in HBOOT
***UNLOCKED***
ACE PVT SHIP S-OFF RL
HBOOT-2.00.0030
MICROP-0438
RADIO-26.10.04.03_M
eMMC-boot
Feb 20 2012,16:03:18
Help me please if you can
Click to expand...
Click to collapse
Do you have a custom recovery?
If you dont, you can find one here 4ext recovery
Download it and extract the .img file to ur adb/fastboot directory.
Rename the .img file to recovery.img
Boot your device into bootloader.
Connect your device to your PC and enter...
Code:
fastboot devices
(just to be sure.
Code:
fastboot flash recovery recovery.img
Once its done flashing, reboot your device into recovery.
Transfer a rom to ur sd card.
Flash it and flash inpiremod if not added to rom already.
mickeyasamoah said:
Do you have a custom recovery?
If you dont, you can find one here 4ext recovery
Download it and extract the .img file to ur adb/fastboot directory.
Rename the .img file to recovery.img
Boot your device into bootloader.
Connect your device to your PC and enter...
Code:
fastboot devices
(just to be sure.
Code:
fastboot flash recovery recovery.img
Once its done flashing, reboot your device into recovery.
Transfer a rom to ur sd card.
Flash it and flash inpiremod if not added to rom already.
Click to expand...
Click to collapse
Thanks for your answer, and i tried theses steps and w/o success, but i will try another suggestion of relocking bl then flashing an ruu
midi_1996 said:
Thanks for your answer, and i tried theses steps and w/o success, but i will try another suggestion of relocking bl then flashing an ruu
Click to expand...
Click to collapse
Wait i think i am beginning to get you. Pls answer these questions
1. When you boot into bootloader and then select recovery, does it vibrate and gives you a black screen?
2. When you turn it off and connect it to a computer via usb, does the charging light come on and shows up as QHSUSB_DLOAD on your computer?
3. When you try flashing ruu, via placing the ***IMG.zip on your sdcard and boot to bootloader, does it detect the ruu, asks you weather you want to flash. And after pressing volume up for yes, its looks as if its flashing but after rebooting stays the same?
4. Or when you try to flash the system.img via fastboot, does it gets stuck flashing?
1) yes, it vibrates and then 7 vibrations (after 2~3 secs) and then a black screen, and hitting the power button wont reboot the phone
2) yes, and even when it is on and on black screen it gives it to me
3) yes
3) no, never tried it
midi_1996 said:
1) yes, it vibrates and then 7 vibrations (after 2~3 secs) and then a black screen, and hitting the power button wont reboot the phone
2) yes, and even when it is on and on black screen it gives it to me
3) yes
3) no, never tried it
Click to expand...
Click to collapse
Lol..you are in serious trouble.
You might be wondering how i knew all that.
Cause it happened to my old Desire HD(Still didnt know weather it was a DHD or Inspire 4G.
It turned out it was emmc problem.
You should think of getting a new device or getting a new motherboard as that was what i did.
I followed an unbrick thread here.
It never worked for me. But you could try.
I remember i installed a wrong QHSUSB_DLOAD drivers which kind of corrupted the bootloader.
So watch out what drivers you use. There might be a possiblity, your might work.

Can't Enter CWM Recovery After Rooting HTC G2

Can't enter CWM recovery after rooting HTC G2
I rooted my HTC G2 and want to upgrade ROM.
However, I can't get into ClockworkMod Recovery mode. When I boot the phone using Power + Home + VolDown I get this screen:
i.imgur.com/h7MjBT0.jpg
(Since I'm too new to embed images these are the HTTP URLs)
But pressing VolDown does nothing. After a few seconds it moves itself along to this screen:
i.imgur.com/3kNbdsR.jpg
And finally back to this screen.
i.imgur.com/Nvgr5o7.jpg
Any ideas what is wrong, or what I need to do to get into CWM recovery so I can install the ROM zip from the sdcard? (Or is there another method I can use to load the ROM and gapps?)
dbooksta said:
I rooted my HTC G2 and want to upgrade ROM.
However, I can't get into ClockworkMod Recovery mode. When I boot the phone using Power + Home + VolDown I get this screen:
i.imgur.com/h7MjBT0.jpg
(Since I'm too new to embed images these are the HTTP URLs)
But pressing VolDown does nothing. After a few seconds it moves itself along to this screen:
i.imgur.com/3kNbdsR.jpg
And finally back to this screen.
i.imgur.com/Nvgr5o7.jpg
Any ideas what is wrong, or what I need to do to get into CWM recovery so I can install the ROM zip from the sdcard? (Or is there another method I can use to load the ROM and gapps?)
Click to expand...
Click to collapse
You need to remove the PC10IMG.zip from your SD card, after that you will be able to get into recovery
That does indeed allow me to select Recovery, but that boots me to this screen:
i.imgur.com/e2H7hTi.jpg
What's going wrong now?
dbooksta said:
That does indeed allow me to select Recovery, but that boots me to this screen:
i.imgur.com/e2H7hTi.jpg
What's going wrong now?
Click to expand...
Click to collapse
Been a while so I can't say for sure, but I believe that is stock recovery
Take a look here
http://forum.xda-developers.com/showthread.php?t=2348266
You will find links to various recovery options as well as a fastboot guide to flash the image
Pretty much just download appropriate recovery and flash it like
fastboot flash recovery nameofrecovery.img
Well I can get the fastboot to recognize the phone, but whether I try to "fastboot flash" an "hboot x.img" or a "recovery x.img" I get
Code:
FAILED (remote: not allowed)
Which appears to be due to the fact that no Cyanogen recovery is available for the vision-compatible builds!
I have no trouble getting that "recovery screen" I showed in the previous message, but I don't understand how to get anything to actually recover.
So I have this kernel (AndromadusMod) that I want to install, but I'm so confused...
dbooksta said:
Well I can get the fastboot to recognize the phone, but whether I try to "fastboot flash" an "hboot x.img" or a "recovery x.img" I get
Which appears to be due to the fact that no Cyanogen recovery is available for the vision-compatible builds!
I have no trouble getting that "recovery screen" I showed in the previous message, but I don't understand how to get anything to actually recover.
So I have this kernel (AndromadusMod) that I want to install, but I'm so confused...
Click to expand...
Click to collapse
Boot into bootloader and write down all info on that screen, with this I should be able to help further
demkantor said:
Boot into bootloader and write down all info on that screen, with this I should be able to help further
Click to expand...
Click to collapse
Initial boot into ClockworkMod (i.e., Power + Vol Down + TouchPad):
Code:
VISION PVT SHIP S-OFF
HBOOT-0.82.0000
MICROP-0425
RADIO-26.02.01.15_M2
eMMC-boot
SEP 2 2010, 17:50:38
HBOOT USB PLUG
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
If I select FASTBOOT from that screen then I get
Code:
VISION PVT SHIP S-OFF
HBOOT-0.82.0000
MICROP-0425
RADIO-26.02.01.15_M2
eMMC-boot
SEP 2 2010, 17:50:38
FASTBOOT USB
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
BOOTLOADER
REBOOT
REBOOT BOOTLOADER
POWER DOWN
At this point if I run "fastboot devices" from the attached computer I get "SH12SRT203241 fastboot".
dbooksta said:
Initial boot into ClockworkMod (i.e., Power + Vol Down + TouchPad):
If I select FASTBOOT from that screen then I get
At this point if I run "fastboot devices" from the attached computer I get "SH12SRT203241 fastboot".
Click to expand...
Click to collapse
So right now you do have security flags removed but still a stock bootloader so you can't flash with fastboot
...I'm having troubles with links right now (using an experimental version of xda app) so I'm going to just paste in a quote from an old thread where I was helping someone in a similar situation
demkantor said:
um, md5sum is just well a sum, it is a unique algorithm to make sure the file downloaded matches (complete/ no corruption)
you can flash just the Hboot, but it also makes no difference if you were to flash the same firmware over the same firmware. so you don't need to bother extracting anything. ill post when I get home,
~make nandroid in recovery
~download
~check md5sum
~name PC10IMG.zip
~put on SDcard
~boot to Hboot
~let it run, it will reboot halfway (needs to cycle emmc)
~let it finish
~reboot to recovery (via adb)
~reformat all in recovery
~remove PC10IMG.zip from SD
~restore nandroid and reboot to OS
EDIT:
DROPBOX LINK ill upload to op when i get a minute but for know here is this
md5 for g2:
md5 for dz:
*thanks again to nipqer for pointing out my obvious mistakes creating these!
EDIT:
Not sure if i made this clear earlier - flashing firmware using any method is potentially
dangerous. Although very unlikely if you follow these steps I'm still throwing out the waring.
If at all possible it is still best to use fastboot to flash these as an error will be given
to you and you can fix your issue before you reboot and make things permanent.
The above is also dangerous without having true radio s-off, if you are not sure
if you have true s-off - follow these steps:
download THIS COPY OF GFREE md5sum:
now unzip it and open a command where gfree is on computer - have phone plugged
in, debugging on and screen unlocked (after you type "su" you need to grant superuser permissions.)
Now type:
If this is your output, you are in good shape!
@CID: 11111111 means you have superCID (able to flash all software once locked out of)
@SIMLOCK= 00 means you're sim-unlocked (able to use any carrier's sim card)
@secu_flag: 0 this means your radio is S-OFF (This is the important info needed!)
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
---------- Post added at 07:14 AM ---------- Previous post was at 07:11 AM ----------
...looks like it didn't post the links when I quoted.... Check out the fastboot thread from the link I sent earlier... This is post #30 there and those links are still active
If you need help let me know and when I get to a PC I'll link you better
I tried to follow your post, but when I tried su I got "su: permission denied". Proceeding anyway and running gfree_verify I get:
Error: could not open modem device: /dev/smd0
Error: verify could not initialize device!
Click to expand...
Click to collapse
Per your recommendation here I also wanted to try switching to 4ext, but when I ran fastboot erase recovery I got:
erasing 'recovery'...
FAILED (remote: not allowed)
Click to expand...
Click to collapse
Flash the custom PC10IMG.zip I made, the link is in that post #30
Do this like before, put on root of sdcard
When its done you will have an engineering bootloader and 4ext recovery
Then just be sure to remove it off SD in order to get into recovery to flash ROM of choice
That is a great image, and 4ext is a great recovery!
However after I reformatted and restored the AndromadusMod.zip the phone just boot cycles to the "htc" screen.
Attached is a current screenshot of the hboot System Info. Should I give up, or am I close?
You have the g2 engineering bootloader now, but the dz one is needed for most ROMs above ICS as it has a larger system partition, do the same thing you did but this time flash the dzPC10IMG.zip from the post I linked you, then ROM and gapps
I think there's something wrong with that dz bootloader: It only ever offers to update [SD ZIP]. I have to physically remove the sdcard and delete the PCIMG10.zip after it runs its install cycle in order to get into recovery; it's impossible to get it to startup in any other mode that allows sdcard access.
After I do delete the PCIMG10.zip, reformat all but sdcard, and install the ROM (which appears to "succeed" suspiciously quickly) I get the boot loop problem again and have to pull the battery to get back into hboot....
Sounds like a bad download, check the md5sum to make sure its good
Yes, MD5 matches that given in the post.
Maybe I misunderstood, so when when flashing the PC10IMG.zip through bootloader it works and changes your bootloader and then you remove the file off sdcard and you are able to get to recovery?
If that all is working then you are in good shape, try another ROM/gapps
Try a gingerbread ROM just to make sure you can get up and running.
Correct. So I just re-wiped and installed this Gingerbread kernel: http://elite-force.eu/elitemod/MOD_EliteKernel_120319.zip
It took a "reasonable" amount of time for 4ext to install that one.
But now it's doing the same boot cycling as before, though much faster than on the JellyBean kernel I previously tried ?
Is there a known stable kernel I should be trying? Maybe I'm as bad at choosing kernels as I am at choosing women....
Haha,
Well a kernel alone won't help, you will need a kernel and a ROM (and probably gapps too)
Try cyanX, its a ROM I put together a few years back, its gingerbread based but has a lot of ICS and jb features back ported to it
Once we know that is working then move on to newer ones
Ah ha: that does help! Putting a JB ROM on did the trick. For some reason in all my reading I didn't get the message that the ROM isn't part of the kernel....
Thank you for all your help!

Categories

Resources