Hi Everyone,
I was trying to install the vemon viper x 3.3.6 (Im kind of new to flashing rom onto phones) onto my htc one x and had to update my hboot from 0.98 to 1.31 which i did with JBW tool and worked perfect and i unlocked my bootloader again but wen i was finished unlocking my bootloader i accendently factory reset my phone so it removed the vemon viper x 3.3.6 zip folder off my phone and cant run my old rom which is the vemon viper x 2.7 as it isnt a jellybean rom. So when i start my phone it loads the rom but doesn't boot. All i can get into is my hboot. My htc one x is s-on as well. Please any help would be great.
Flash a recovery, mount usb storage, copy rom to phone and flash it.
TToivanen said:
Flash a recovery, mount usb storage, copy rom to phone and flash it.
Click to expand...
Click to collapse
I flashed clockworkmod recovery onto my phone but i cant get into my phone to use the usb storage option to copy the rom onto my phone.
enter the bootloader by pressing volume - and the power button together as long as you are in the bootloader, do not let go before that.....then navigate to HBOOT - RECOVERY. it boots to recovery and activate the mount as mass storage device in the mounts and storage section (if you have CWM) if you get an error by doing that i suggest you flash the latest CWM recovery 5.8.4.0 first. older ones dont have this option !
Mr Hofs said:
enter the bootloader by pressing volume - and the power button together as long as you are in the bootloader, do not let go before that.....then navigate to HBOOT - RECOVERY. it boots to recovery and activate the mount as mass storage device in the mounts and storage section (if you have CWM) if you get an error by doing that i suggest you flash the latest CWM recovery 5.8.4.0 first. older ones dont have this option !
Click to expand...
Click to collapse
I will giv it a go, thanks for your help
rwhelan said:
I will giv it a go, thanks for your help[/QUO[/I]
I have noticed when it loads hboot it says my usb master mode cannot be accessed and asks to remove my usb cable, what does that mean??? I installed the vemon viper x rom through recovery on my fone but it keeps bring up the hboot when i turn on my fone it does booth into my fone at all and my recovery doesnt appear when i go into it just goes black booths back into my hboot. does anyone know whats going on and what should i do ( i am a bit of a noob when it comes to these things)????
Click to expand...
Click to collapse
rwhelan said:
rwhelan said:
I will giv it a go, thanks for your help[/QUO[/I]
I have noticed when it loads hboot it says my usb master mode cannot be accessed and asks to remove my usb cable, what does that mean??? I installed the vemon viper x rom through recovery on my fone but it keeps bring up the hboot when i turn on my fone it does booth into my fone at all and my recovery doesnt appear when i go into it just goes black booths back into my hboot. does anyone know whats going on and what should i do ( i am a bit of a noob when it comes to these things)????
Click to expand...
Click to collapse
That notification is normal, we all have that due to the usb cable being connected !
Did you install the rom with the cable connected ? That's a no go......always install a rom without the usb connected ! First put the phone into the bootloader, hold power and volume - until you are in. Then the fastboot command
Fastboot erase cache
From this point you disconnect the cable. enter the recovery and re-install the viper rom again.
You did flash the boot.img from the rom right ?
Click to expand...
Click to collapse
Mr Hofs said:
rwhelan said:
That notification is normal, we all have that due to the usb cable being connected !
Did you install the rom with the cable connected ? That's a no go......always install a rom without the usb connected ! First put the phone into the bootloader, hold power and volume - until you are in. Then the fastboot command
Fastboot erase cache
From this point you disconnect the cable. enter the recovery and re-install the viper rom again.
You did flash the boot.img from the rom right ?
Click to expand...
Click to collapse
It couldn't fastboot the boot.img file so decided to install it from recovery i see now that was a bit of a mistake. I will " fastboot erase cache" and fastboot the boot.img. Hope for the best
Click to expand...
Click to collapse
You need to flash the boot.img file just like a recovery . Boot.img file in the fastboot folder
In the command window
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Then unhook the cable
Enter recovery and install the rom. And for the kernel question you answer with option 1.viper x delivered !
Mr Hofs said:
You need to flash the boot.img file just like a recovery . Boot.img file in the fastboot folder
In the command window
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Then unhook the cable
Enter recovery and install the rom. And for the kernel question you answer with option 1.viper x delivered !
Click to expand...
Click to collapse
I have one last big problem, my phone is on a boot loop after trying to install my rom from recovery and the battery is too low so it wont allow me to flash anything onto my phone. What can i do???
can you still enter the recovery ? if so....put the phone in the recovery and put it on the wallcharger, then you select 1 time REBOOT RECOVERY and let it sit there. it will charge up !
Mr Hofs said:
can you still enter the recovery ? if so....put the phone in the recovery and put it on the wallcharger, then you select 1 time REBOOT RECOVERY and let it sit there. it will charge up ![/QUI
I cant get into the recovery. Is there anything i can do??
Click to expand...
Click to collapse
Yes put the phone in the bootloader and put this script in the fastboot folder. Open a command window there and type
Batt script.bat
http://db.tt/aLqeTpPO
It will continuesly reboot the bootloader and charge the phone little by little ! Until you got some power and can acces the custom recovery to charge it more !
If it does not work, remove the space in batt script.bat so it says battscript.bat .....
Mr Hofs said:
Yes put the phone in the bootloader and put this script in the fastboot folder. Open a command window there and type
Batt script.bat
http://db.tt/aLqeTpPO
It will continuesly reboot the bootloader and charge the phone little by little ! Until you got some power and can acces the custom recovery to charge it more !
If it does not work, remove the space in batt script.bat so it says battscript.bat .....
Click to expand...
Click to collapse
I am going to sound very stupid. Could you give me the exact line of command to use if the fastboot folder is saved in the local storage on the computer (c: drive), i dont want to do more damage then i have.:silly:
Example when the fastboot files are in
C:\fastboot\the fastboot files
Then you copy that battscript into that folder
Then you navigate to that folder and hold down shift and right click the mouse inside that folder, then choose "open command prompt here"
In that command prompt you type
Battscript.bat (hit enter)
And the phone should start rebooting.
If the fastboot folder is somewhere else you repeat my steps only change folder that i used.....
Mr Hofs said:
Example when the fastboot files are in
C:\fastboot\the fastboot files
Then you copy that battscript into that folder
Then you navigate to that folder and hold down shift and right click the mouse inside that folder, then choose "open command prompt here"
In that command prompt you type
Battscript.bat (hit enter)
And the phone should start rebooting.
If the fastboot folder is somewhere else you repeat my steps only change folder that i used.....
Click to expand...
Click to collapse
The file worked perfectly just opened it in the fastboot files and left it run all night. Then fastboot erase cache and the recovery is back up and running just have to flash the boot.img and phone up and running. Thanks for your help.
No problem. Glad its sorted !
Related
I tried to root and install CM10 on my HTC One X (AT&T) (v2.20). However, I have run into trouble. Here is what happened:
Successfully rooted phone using Hasooon2000's All-in-one Kit
Flashed Recovery Successfully (I think) using the All-in-one Kit
I'm now able to boot into "TWRP" but I'm not really sure what to do next.
It skips your HBOOT too?
SharkDog2 said:
It skips your HBOOT too?
Click to expand...
Click to collapse
Yes, unfortunately.
Is the phone an evita or endevour? (quad core or dual core). What recovery did you flash? CWM or TWRP?
Try connecting the phone through usb and go to your adb folder and type in cmd: fastboot devices / fastboot list devices see if it is recognized.
Also try holding the power button and volume down button for 1 minute, it might reboot a few times and go back to the screen but I think it should jump back to your Hboot.
SharkDog2 said:
Is the phone an evita or endevour? (quad core or dual core). What recovery did you flash? CWM or TWRP?
Try connecting the phone through usb and go to your adb folder and type in cmd: fastboot devices / fastboot list devices see if it is recognized.
Also try holding the power button and volume down button for 1 minute, it might reboot a few times and go back to the screen but I think it should jump back to your Hboot.
Click to expand...
Click to collapse
Thanks! Okay, I was able to get to TWRP but I'm not sure what to do next.
Well if you are in the recovery now make sure the rom you have downloaded is on your phone.
First open the rom.zip in your computer and take out the file called boot.img. Put this file in your fastboot folder.
Now boot your phone back into fastboot mode
then run this in cmd. "fastboot flast boot boot.img" from the folder your fastboot is located etc. if you are using the boot.img flasher from the rom make sure to put the boot.img there
It will send the boot.img to your phone and say if it is succesful.
Next boot back into your recovery and install the rom zip from inside the recovery.
wrong section, don't flash anything here..
Wrong Forum1!
Bro u have a dual core(At&t) version.The hardware is totally different ..Please post in in the thread for ur phone.
Dont flash anything from here!
Thanks! This worked. I'm now running Jelly Bean -- way better than all that AT&T garbage!
SharkDog2 said:
Well if you are in the recovery now make sure the rom you have downloaded is on your phone.
First open the rom.zip in your computer and take out the file called boot.img. Put this file in your fastboot folder.
Now boot your phone back into fastboot mode
then run this in cmd. "fastboot flast boot boot.img" from the folder your fastboot is located etc. if you are using the boot.img flasher from the rom make sure to put the boot.img there
It will send the boot.img to your phone and say if it is succesful.
Next boot back into your recovery and install the rom zip from inside the recovery.
Click to expand...
Click to collapse
Hi all,
I think my friend and i bricked his phone last night.
Its the HTC one x and we used the Hasoon2000 method. I think the problem was the perm root part of the software said unable to connect to device.
I searched around and someone said to flash supersu and that should do it. However after flashing that we did a backup of the phone in clockwork recovery.
We then tried flashing the viperX rom which we did on another one X and worked fine, it got to 1% and restarted. It then stuck at the quietly brilliant page.
We can't get it to boot into recovery but can get it to go to the bootloader. We tried to do the fastboot command from the PC to erase fastboot cache but it couldnt connect to the device.
I have read this thread http://forum.xda-developers.com/showthread.php?t=1764421 and but it is about the AT&T version, what recovery image would i need?
Also how can i tell if it is hard bricked or soft bricked? As i'm worried it could be hard bricked cause i couldnt erase the fastboot cache.
Any help is appreciated, and sorry if this is answered somewhere else but i couldnt see an answer.
Bit more bootloader info:
Unlocked
S-On
Hboot 1.39.0000
If possible i'd like to help my friend finish rooting it but if its easier put it back to normal.
Again thanks if anyone can help me.
What does the bootloader say, EVITA or ENDEAVORU ?
It says endeavoru
Then stay away from the HTC one XL forum, its a different phone !!!
Do you have the HTC drivers installed and a folder on the pc with the fastboot files ?
Place these files in a folder like this
http://db.tt/ldx3qOOU
C:\fastboot\files i gave you
Then put the phone in the bootloader and open a command prompt inside the fastboot folder on the pc and type
Fastboot devices
If a serial comes up we are good to go !
Mr Hofs said:
Then stay away from the HTC one XL forum, its a different phone !!!
Do you have the HTC drivers installed and a folder on the pc with the fastboot files ?
Place these files in a folder like this
http://db.tt/ldx3qOOU
C:\fastboot\files i gave you
Then put the phone in the bootloader and open a command prompt inside the fastboot folder on the pc and type
Fastboot devices
If a serial comes up we are good to go !
Click to expand...
Click to collapse
Well we installed the HTC drivers with the Hasoon tool so yes. Just meeting my friend now so i'll put these files in a folder and try that straight away.
Thanks, will let you know shortly.
DannyBLOL said:
Well we installed the HTC drivers with the Hasoon tool so yes. Just meeting my friend now so i'll put these files in a folder and try that straight away.
Thanks, will let you know shortly.
Click to expand...
Click to collapse
Just connected it to my laptop and the pc said fastboot drivers installed and made the noise of a device connecting and disconnecting.
Haven't tried what you said yet as it said battery is too low on the bootloader. I've now plugged it in a plug socket and have it on the htc quietly brilliant screen. I take it this should still charge it?
DannyBLOL said:
Just connected it to my laptop and the pc said fastboot drivers installed and made the noise of a device connecting and disconnecting.
Haven't tried what you said yet as it said battery is too low on the bootloader. I've now plugged it in a plug socket and have it on the htc quietly brilliant screen. I take it this should still charge it?
Click to expand...
Click to collapse
Is it possible for you to turn the phone off?
IF so it should charge a bit quicker that way
Also just to clarify, how did you try to install Viper X on your phone?
Hmm no, if its bootlooping then yes. Is the bootloader unkocked and do you have a custom recovery installed yet ?
In case you have a custom recovery installed put the phone in the recovery it will charge the batt in there .....
Otherwise put the phone in the bootloader and run this file from within the fastboot folder
http://db.tt/aLqeTpPO
It will continuously reboot the phone and charge it little by little, leave it like this for an hour or so.
No, if i go into bootloader and fastboot then power down it turns itself back on if its plugged in.
Mr Hofs said:
Hmm no, if its bootlooping then yes. Is the bootloader unkocked and do you have a custom recovery installed yet ?
In case you have a custom recovery installed put the phone in the recovery it will charge the batt in there .....
Otherwise put the phone in the bootloader and run this file from within the fastboot folder
http://db.tt/aLqeTpPO
It will continuously reboot the phone and charge it little by little, leave it like this for an hour or so.
Click to expand...
Click to collapse
The bootloader says unlocked, and we had CWM recovery installed it no longer loads up, it just reboots itself.
I'm confused by what you mean, what command would i use to run that file from the fastboot folder and after doing that do you mean i should leave it charging from the laptop?
Link to image of the bootloader if this helps - http://imgbin.org/index.php?page=image&id=11217
Just connect the phone to the pc and put the phone in the bootloader then execute the .bat file from the fastboot folder (download it and move it in there)
It should start rebooting the phone over and over again.
Edit : I see fastboot usb in the bootloader that's good ! :thumbup:
We need to get the batt charged so we can reflash the recovery, that will probably solve it all.
Mr Hofs said:
Just connect the phone to the pc and put the phone in the bootloader then execute the .bat file from the fastboot folder (download it and move it in there)
It should start rebooting the phone over and over again
Click to expand...
Click to collapse
Ok this is working. It doesn't say about low battery anymore on the bootloader. But ill leave it charging for a bit. What is my next step?
Next step is to reflash the recovery, download this one
http://db.tt/Krlm4dPs
Rename it to recovery.img and Copy the file in the fastboot folder. Put the phone in the bootloader again and flash the recovery
All these commands are executed from the command prompt inside the fastboot folder.
Fastboot erase cache
Fastboot flash recovery recovery.img
Fastboot erase cache
Then enter the recovery by pressing hboot one time (confirm with powerbutton) then press recovery
Ignore me Mr Hoffs beat me to it
Mr Hofs said:
Next step is to reflash the recovery, download this one
http://db.tt/Krlm4dPs
Rename it to recovery.img and Copy the file in the fastboot folder. Put the phone in the bootloader again and flash the recovery
All these commands are executed from the command prompt inside the fastboot folder.
Fastboot erase cache
Fastboot flash recovery recovery.img
Fastboot erase cache
Then enter the recovery by pressing hboot one time (confirm with powerbutton) then press recovery
Click to expand...
Click to collapse
YES! That has worked, we are in recovery. What can i do now? Should i try flashing ViperX or is the phone not permarooted?
Last time i tried to do permroot with the Hasoon2000 tool. That didnt work and i just flashed superSU, i think i must be missing something.
Thanks so much for your help!
If you do this, you will be good. Maybe you van skip some steps because you already did them before but I mention them anyway
Download the viper x JB rom, open it with an unpack program and copy the boot.img and place it in the fastboot folder. Copy the rom.zip to the phone (mount as usb drive in the mounts & storage part of the recovery)
Now put the phone back in the bootloader and flash the boot.img
Fastboot erase cache
Fastboot flash boot boot img
Fastboot erase cache
Enter the recovery again and do a full wipe , also wipe the dalvik cache under the advanced tab. Then install the rom.zip with the
Install zip from sdcard menu !
Install the viper and choose in the aroma installer of the rom FULL WIPE and the question you get about the custom kernel you answer with NO !
Don't worry about root, the rom is standard rooted
Good to go mate
Mr Hofs said:
If you do this, you will be good. Maybe you van skip some steps because you already did them before but I mention them anyway
Download the viper x JB rom, open it with an unpack program and copy the boot.img and place it in the fastboot folder. Copy the rom.zip to the phone (mount as usb drive in the mounts & storage part of the recovery)
Now put the phone back in the bootloader and flash the boot.img
Fastboot erase cache
Fastboot flash boot boot img
Fastboot erase cache
Enter the recovery again and do a full wipe , also wipe the dalvik cache under the advanced tab. Then install the rom.zip with the
Install zip from sdcard menu !
Install the viper and choose in the aroma installer of the rom FULL WIPE and the question you get about the custom kernel you answer with NO !
Don't worry about root, the rom is standard rooted
Good to go mate
Click to expand...
Click to collapse
Thanks so much mate!
Worked flawlessly. Seriously can't thank you enough!
Nice :thumbup:
Have fun with it !
CASE CLOSED !
Im sorry if this has been answered so many times but ive spent about 4 hours looking around and i couldnt understand half of the solutions that were out there. My problem is that i attempted to root my htc one x and i succeeded. Then i tried to put the new jellybean 4.2.2 cyanogen10.1 mod nightlies or something like that. This failed terribly. I have no back ups or anything what so ever. I dont care about anything i may have lost, i only want to get the phone working again. I know i should have researched this further before trying, but yeah... if anybody has done the same thing and solved there matter i'd be so grateful. it still responds on fastboot. heres some info on the bootloader screen. I tried factory resetting it, clearing the cache...none worked.
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.39.0000
CPLD-None
MICROP-None
Radio-5.1204.164.30H
eMMC-bootmode:disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
Dec 17 2012,13:59:37
Did you flash the boot.img from the CM10.1 rom ?
Mr Hofs said:
Did you flash the boot.img from the CM10.1 rom ?
Click to expand...
Click to collapse
well not sure what you mean but i did put the boot.img in the same folder with the adb stuff and attempted to reboot it on fastboot but the same thing happened.
Phone in the bootloader and flash the boot.img
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Did you do that from the command window on the pc ?
Mr Hofs said:
Phone in the bootloader and flash the boot.img
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Did you do that from the command window on the pc ?
Click to expand...
Click to collapse
yes however i only did the fastboot erase cache once not after the the second command. Also i wiped all the date on recovery mode. should i try the commands above again? sorry if im being a pain
Best to do is :
Full wipe in the recovery ! Then install the CM10.1 rom and directly the GAPPS. don't reboot but type in the command window
Adb reboot bootloader
Then flash the boot.img and reboot
Mr Hofs said:
Best to do is :
Full wipe in the recovery ! Then install the CM10.1 rom and directly the GAPPS. don't reboot but type in the command window
Adb reboot bootloader
Then flash the boot.img and reboot
Click to expand...
Click to collapse
thanks but how do i install the cm10.1 and gapps when i cant enter my phones mass storage on pc.
Mount is a usb drive in the recovery
Mr Hofs said:
Mount is a usb drive in the recovery
Click to expand...
Click to collapse
okay ive installed the clockwork mod and im trying to enter the phones sotrage on pc, but i cant seem to do it. which option is it. mount/sdcard and mount/usb storage dont work
What recovery do have ? Version number ?
https://www.dropbox.com/s/guvfqd7tp8acxg6/recovery 5.8.4.0.img
Flash this one and go to mounts and storage and tap the last option in the list
Please help me..
Hi, same problem here..
my phone got stuck on the startup screen (HTC quietly brilliant). But my case is different because im a total noob, newly registered here. I bought my htc one x that is already in CM10 jellybean mode. last night i got a notification for cm10 update, I just click it without thinking much (cause im a noob) then after rebooting it just freezes... I hope senior members here can help me, i reallly dont want to lose my data..
You probably updated to CM10.1. You need to take the update's boot.img and flash it in fastboot.
Sent from my One X using xda premium
TToivanen said:
You probably updated to CM10.1. You need to take the update's boot.img and flash it in fastboot.
Sent from my One X using xda premium
Click to expand...
Click to collapse
many thanks for replying me..
sorry but im totally clueless at this point, i spent all night reading posts, watching videos.. i've seen the same advice (flash boot.img in fastboot) in several places, but still dont know how to do it .. I would be very very grateful if someone can guide me step by step to do this
You place the boot.img file from the CM10 rom.zip (its inside) in the fastboot folder on the pc, then you put the phone in the bootloader
Open the command window in the fastboot folder(point in the fastboot folder hold down shift + right mouse button- open command window here) and type
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Mr Hofs said:
You place the boot.img file from the CM10 rom.zip (its inside) in the fastboot folder on the pc, then you put the phone in the bootloader
Open the command window in the fastboot folder(point in the fastboot folder hold down shift + right mouse button- open command window here) and type
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Click to expand...
Click to collapse
Does it usually took a long time for every command to complete? im entering fastboot erase cache and <waiting for device> appear and its still there right now..
just to be sure, the bootloader mode is when the HBOOT is highlighted blue am i right?
oh i hate myself..
It should say
Fastboot usb in red text above that
In bootloader you should highlight fastboot using volume keys and press power. Then fastboot mode should be engaged and FASTBOOT USB text visible.
Sent from my One X using xda premium
Mr Hofs said:
It should say
Fastboot usb in red text above that
Click to expand...
Click to collapse
now i have fastboot usb in red and "<waiting for devices>" still there. any thoughts?? does this mean the PC doesn't recognize my phone or it I should wait longer?
Do you have HTC syncmanager installed on the pc ? Uninstall it but leave the drivers when asked !
Reboot the pc and the bootloader....check again.
And you should have a myhtc in the device manager when the phone is plugged in the pc
Mr Hofs said:
What recovery do have ? Version number ?
https://www.dropbox.com/s/guvfqd7tp8acxg6/recovery 5.8.4.0.img
Flash this one and go to mounts and storage and tap the last option in the list
Click to expand...
Click to collapse
i have version 5.8.4.0, i went to the last option and it still does not come up on the pc
On my HTC One V I unlock bootloader and rooted it successfully. It was working fine, but about 1-2 weeks later, when I was chatting with my friends on Messenger, it was starting to lag like hell until i couldn't do antyhing. I tried to turn it off and on with the power button. When I turned it on, firstly the logo "Quietly Brilliant" appeared and then...there was just a black screen. The phone was still turned on, but just with a black screen.. a slightly lighter black screen. I tried to turn it on and of. I can go to fast boot mode with Volume down+power button. I tried factory reset, but there was still the black screen. I send it to the manufacture, but they said, that the hardware is destroyed, because I've changed it. I think they mean I changed it with root and unlocking the bootloader...but I think that's not true? I don't think root or unlocking bootloader can change hardware. Yet I tried to unroot and relock the bootloader, but I can't do It if I can't connect my phone to my pc anymore. So my questions are:
1)How could I change the hardware?
2)How can I connect my phone to pc?
3)Is there a way to save my phone?
4)How does the manufacture know, that my phone is rooted when it can't be turned on, or connected to pc
5)Do they just lie about the hardware, so I must pay for it?
first of all, are you gsm or cdma? (do you have a sim?) If you can access bootloader, then you can fix your phone (99,9% of times). all you need to do is flash another rom with the correct kernel
mr_nooby said:
first of all, are you gsm or cdma? (do you have a sim?) If you can access bootloader, then you can fix your phone (99,9% of times). all you need to do is flash another rom with the correct kernel
Click to expand...
Click to collapse
Yes, I have s sim..so I have gsm i think? Right now, the manufacture is sending me back my phone. What is the bootloader exactly? Do you mean the combination of the keys volume down+power button?
If yes and I can acces to bootloader, how can I flash the rom with the correct kernel? Does it mean, my phone will be back to normal like it was at the start?
If I can't acces to bootloader, is there still a way to repair my phone?
btw I can't connect my phone to my pc...at least It didn't worked.
Don't worry, when you get back your phone tell me. If you can access your bootloader we will get your phone back to normal :thumbup:
mr_nooby said:
Don't worry, when you get back your phone tell me. If you can access your bootloader we will get your phone back to normal :thumbup:
Click to expand...
Click to collapse
Thank you very much!! How can I contact you when I get my phone back?
lddangsta said:
Thank you very much!! How can I contact you when I get my phone back?
Click to expand...
Click to collapse
first thing, when you get your phone back access the bootloader, hit fastboot and connect the phone to the pc (then after some seconds try vol up or down), it should say fastboot usb. tell me if it does (write it here)
mr_nooby said:
first thing, when you get your phone back access the bootloader, hit fastboot and connect the phone to the pc (then after some seconds try vol up or down), it should say fastboot usb. tell me if it does (write it here)
Click to expand...
Click to collapse
My phone is back. How can I access bootloader?
lddangsta said:
My phone is back. How can I access bootloader?
Click to expand...
Click to collapse
When starting your phone, hold the VOLUME DOWN BUTTON and Power buttons together
Seraz007 said:
When starting your phone, hold the VOLUME DOWN BUTTON and Power buttons together
Click to expand...
Click to collapse
When It's turned off, I hold the volume down button and power button together for 10 seconds. Then I let it go, but there's no bootloader mode. Before I sended it to the manufacture, I somehow did it, but I don't remember how.
lddangsta said:
When It's turned off, I hold the volume down button and power button together for 10 seconds. Then I let it go, but there's no bootloader mode. Before I sended it to the manufacture, I somehow did it, but I don't remember how.
Click to expand...
Click to collapse
Okay I got it. I couldn't access to bootloader because my phone was connected to my pc
mr_nooby said:
first thing, when you get your phone back access the bootloader, hit fastboot and connect the phone to the pc (then after some seconds try vol up or down), it should say fastboot usb. tell me if it does (write it here)
Click to expand...
Click to collapse
Yesm It said fastboot usb. What now?
mr_nooby said:
first thing, when you get your phone back access the bootloader, hit fastboot and connect the phone to the pc (then after some seconds try vol up or down), it should say fastboot usb. tell me if it does (write it here)
Click to expand...
Click to collapse
Yes, it said fastboot usb. What now?
Hey sorry I have to go to school now.. I'll write a little guide as soon as I come back, be patient. In order you have to unlock and root (if you haven't done it already), flash a recovery (I suggest twrp recovery, you can find it in android development or original android development-This also only if you don't have that already), factory reset from recovery, mount usb storage, copy rom to your phone, unmount, flash the rom, reboot into bootloader and flash the correct kernel found in the rom thread. This should work. I'll give you a hit when I get back tough.
mr_nooby said:
Hey sorry I have to go to school now.. I'll write a little guide as soon as I come back, be patient. In order you have to unlock and root (if you haven't done it already), flash a recovery (I suggest twrp recovery, you can find it in android development or original android development-This also only if you don't have that already), factory reset from recovery, mount usb storage, copy rom to your phone, unmount, flash the rom, reboot into bootloader and flash the correct kernel found in the rom thread. This should work. I'll give you a hit when I get back tough.
Click to expand...
Click to collapse
Its bootloader is unlocked and it's rooted. Now for the recovery i found this:
http://www.teamw.in/project/twrp2/119
They say I should download the newest recovery img, access bootloader, select fastboot, plug the device into computer and run the command:
fastboot flash recovery recoveryfilename.img into command prompt right?
Yes its right. Then you boot into recovery, and mount usb storage and with the pc copy a rom into the sd card, then unmount, from the recovery go to wipe - > factory reset, once it's done go to install and select the zip of the rom. When it's done, go back to the home page of recovery, and from there press reboot bootloader. Now do fastboot, and from the pc, put kernel in fastboot folder (the same place where you put your recovery to flash it), open cmd and type fastboot flash boot nameofkernel.img, wait for it to complete, reboot and enjoy!
mr_nooby said:
Yes its right. Then you boot into recovery, and mount usb storage and with the pc copy a rom into the sd card, then unmount, from the recovery go to wipe - > factory reset, once it's done go to install and select the zip of the rom. When it's done, go back to the home page of recovery, and from there press reboot bootloader. Now do fastboot, and from the pc, put kernel in fastboot folder (the same place where you put your recovery to flash it), open cmd and type fastboot flash boot nameofkernel.img, wait for it to complete, reboot and enjoy!
Click to expand...
Click to collapse
When I type "fastboot flash recovery recoveryfilename.img" into the command prompt..it tells me:'fastboot' is not recognized as an internal or external command, operable program or batch file
Have you downloaded the fastboot folder? And have you located it in cmd?
lddangsta said:
When I type "fastboot flash recovery recoveryfilename.img" into the command prompt..it tells me:'fastboot' is not recognized as an internal or external command, operable program or batch file
Click to expand...
Click to collapse
i think you'll be better off flashing recovery by the all in one toolkit
mr_nooby said:
Have you downloaded the fastboot folder? And have you located it in cmd?
Click to expand...
Click to collapse
I have a folder named Android an there's: adb.exe, AdbWinApi.dll, fastboot.exe, Unlock_code.bin
Do you mean this?
Yes, now create a folder on the desktop called fastboot and copy those files in that folder. Then in cmd type cd desktop (enter) cd fastboot (enter), put the recovery in that folder, connect the phone on fastboot usb and type the recovery command
hi guys i hope u can help me
i flashed cm 10.1.3 and everything went perfect but when i booted and wanted to connect to the wifi but it didnt work, bluetooth doesnt work either.
so i tried to connect to the pc and put cm 10.1.2 rom and flash but pc doesnt find the hox. i tried on 3 computers and i got the same result! :/
i uninstalled all htc programs, usb driver and mtp drivers and re installed them but it didnt work. so guys ur are my only help left!
i appreciate all answers and ask if u dont understand
Flash.......the.........boot......img !!!
Pleaseeeeeee
Remember to flash boot.img in your zip
Sent from my HTC One X using Tapatalk
Mr Hofs said:
Flash.......the.........boot......img !!!
Click to expand...
Click to collapse
Huongnv said:
Pleaseeeeeee
Remember to flash boot.img in your zip
Sent from my HTC One X using Tapatalk
Click to expand...
Click to collapse
1. it says i cant connect the pc on my phone in fast bot (it said so earlier too so not something new)
2. ive deleted everything on my sdcard so its empty the bot img is gone( i thought if i format the sdcard it would work)
so how will i transfer a file?
Mount the sdcard via the recovery and copy the rom. Boot img needs to be flashed via fastboot and not via recovery !
Mr Hofs said:
Mount the sdcard via the recovery and copy the rom. Boot img needs to be flashed via fastboot and not via recovery !
Click to expand...
Click to collapse
thank you for ur replies
but im in recovery and i connect the usband i see the disc on the computer but when i click then it says i "mount a disc"
i get that error
What recovery ?
Mr Hofs said:
What recovery ?
Click to expand...
Click to collapse
i go in to fast bot then pressing recovery and then i come to a menu (cwm)
or what do u mean?
Turn off your device.
1. Hold down volume button with power button for few seconds till it will open bootloader
2. Then choose "fastboot" and not recovery!! But fastboot
3. Make sure so you have connected your htc one x with the USB cable to PC
4. Than go to your fastboot folder on PC (make sure if you have all needed HTC drivers) and extract from rom file "boot.img" and copy it here!
5. When you are in this folder hold shift and right click in folder and choose "Open Command Promt in this folder" or something like this
6. Then just type to command prompt this:
fastboot erase cache
then wait when it says okay.
then:
fastboot flash boot boot.img
wait till it says okay.
Power off device again and again hold down volume button with power button then choose RECOVERY
When you get into your recovery wipe data/cache/dalvik cache and flash rom
Here you go
That is way how I am flashing.
I mean what recovery are you using ! Type and version number and please be specific !
Morrdigian said:
Turn off your device.
1. Hold down volume button with power button for few seconds till it will open bootloader
2. Then choose "fastboot" and not recovery!! But fastboot
3. Make sure so you have connected your htc one x with the USB cable to PC
4. Than go to your fastboot folder on PC (make sure if you have all needed HTC drivers) and extract from rom file "boot.img" and copy it here!
5. When you are in this folder hold shift and right click in folder and choose "Open Command Promt in this folder" or something like this
6. Then just type to command prompt this:
fastboot erase cache
then wait when it says okay.
then:
fastboot flash boot boot.img
wait till it says okay.
Power off device again and again hold down volume button with power button then choose RECOVERY
When you get into your recovery wipe data/cache/dalvik cache and flash rom
Here you go
That is way how I am flashing.
Click to expand...
Click to collapse
dude u saved me and my phone! thank u guys so much! love u!!!!!!!!!:good::good::good: