Hi all,
I think my friend and i bricked his phone last night.
Its the HTC one x and we used the Hasoon2000 method. I think the problem was the perm root part of the software said unable to connect to device.
I searched around and someone said to flash supersu and that should do it. However after flashing that we did a backup of the phone in clockwork recovery.
We then tried flashing the viperX rom which we did on another one X and worked fine, it got to 1% and restarted. It then stuck at the quietly brilliant page.
We can't get it to boot into recovery but can get it to go to the bootloader. We tried to do the fastboot command from the PC to erase fastboot cache but it couldnt connect to the device.
I have read this thread http://forum.xda-developers.com/showthread.php?t=1764421 and but it is about the AT&T version, what recovery image would i need?
Also how can i tell if it is hard bricked or soft bricked? As i'm worried it could be hard bricked cause i couldnt erase the fastboot cache.
Any help is appreciated, and sorry if this is answered somewhere else but i couldnt see an answer.
Bit more bootloader info:
Unlocked
S-On
Hboot 1.39.0000
If possible i'd like to help my friend finish rooting it but if its easier put it back to normal.
Again thanks if anyone can help me.
What does the bootloader say, EVITA or ENDEAVORU ?
It says endeavoru
Then stay away from the HTC one XL forum, its a different phone !!!
Do you have the HTC drivers installed and a folder on the pc with the fastboot files ?
Place these files in a folder like this
http://db.tt/ldx3qOOU
C:\fastboot\files i gave you
Then put the phone in the bootloader and open a command prompt inside the fastboot folder on the pc and type
Fastboot devices
If a serial comes up we are good to go !
Mr Hofs said:
Then stay away from the HTC one XL forum, its a different phone !!!
Do you have the HTC drivers installed and a folder on the pc with the fastboot files ?
Place these files in a folder like this
http://db.tt/ldx3qOOU
C:\fastboot\files i gave you
Then put the phone in the bootloader and open a command prompt inside the fastboot folder on the pc and type
Fastboot devices
If a serial comes up we are good to go !
Click to expand...
Click to collapse
Well we installed the HTC drivers with the Hasoon tool so yes. Just meeting my friend now so i'll put these files in a folder and try that straight away.
Thanks, will let you know shortly.
DannyBLOL said:
Well we installed the HTC drivers with the Hasoon tool so yes. Just meeting my friend now so i'll put these files in a folder and try that straight away.
Thanks, will let you know shortly.
Click to expand...
Click to collapse
Just connected it to my laptop and the pc said fastboot drivers installed and made the noise of a device connecting and disconnecting.
Haven't tried what you said yet as it said battery is too low on the bootloader. I've now plugged it in a plug socket and have it on the htc quietly brilliant screen. I take it this should still charge it?
DannyBLOL said:
Just connected it to my laptop and the pc said fastboot drivers installed and made the noise of a device connecting and disconnecting.
Haven't tried what you said yet as it said battery is too low on the bootloader. I've now plugged it in a plug socket and have it on the htc quietly brilliant screen. I take it this should still charge it?
Click to expand...
Click to collapse
Is it possible for you to turn the phone off?
IF so it should charge a bit quicker that way
Also just to clarify, how did you try to install Viper X on your phone?
Hmm no, if its bootlooping then yes. Is the bootloader unkocked and do you have a custom recovery installed yet ?
In case you have a custom recovery installed put the phone in the recovery it will charge the batt in there .....
Otherwise put the phone in the bootloader and run this file from within the fastboot folder
http://db.tt/aLqeTpPO
It will continuously reboot the phone and charge it little by little, leave it like this for an hour or so.
No, if i go into bootloader and fastboot then power down it turns itself back on if its plugged in.
Mr Hofs said:
Hmm no, if its bootlooping then yes. Is the bootloader unkocked and do you have a custom recovery installed yet ?
In case you have a custom recovery installed put the phone in the recovery it will charge the batt in there .....
Otherwise put the phone in the bootloader and run this file from within the fastboot folder
http://db.tt/aLqeTpPO
It will continuously reboot the phone and charge it little by little, leave it like this for an hour or so.
Click to expand...
Click to collapse
The bootloader says unlocked, and we had CWM recovery installed it no longer loads up, it just reboots itself.
I'm confused by what you mean, what command would i use to run that file from the fastboot folder and after doing that do you mean i should leave it charging from the laptop?
Link to image of the bootloader if this helps - http://imgbin.org/index.php?page=image&id=11217
Just connect the phone to the pc and put the phone in the bootloader then execute the .bat file from the fastboot folder (download it and move it in there)
It should start rebooting the phone over and over again.
Edit : I see fastboot usb in the bootloader that's good ! :thumbup:
We need to get the batt charged so we can reflash the recovery, that will probably solve it all.
Mr Hofs said:
Just connect the phone to the pc and put the phone in the bootloader then execute the .bat file from the fastboot folder (download it and move it in there)
It should start rebooting the phone over and over again
Click to expand...
Click to collapse
Ok this is working. It doesn't say about low battery anymore on the bootloader. But ill leave it charging for a bit. What is my next step?
Next step is to reflash the recovery, download this one
http://db.tt/Krlm4dPs
Rename it to recovery.img and Copy the file in the fastboot folder. Put the phone in the bootloader again and flash the recovery
All these commands are executed from the command prompt inside the fastboot folder.
Fastboot erase cache
Fastboot flash recovery recovery.img
Fastboot erase cache
Then enter the recovery by pressing hboot one time (confirm with powerbutton) then press recovery
Ignore me Mr Hoffs beat me to it
Mr Hofs said:
Next step is to reflash the recovery, download this one
http://db.tt/Krlm4dPs
Rename it to recovery.img and Copy the file in the fastboot folder. Put the phone in the bootloader again and flash the recovery
All these commands are executed from the command prompt inside the fastboot folder.
Fastboot erase cache
Fastboot flash recovery recovery.img
Fastboot erase cache
Then enter the recovery by pressing hboot one time (confirm with powerbutton) then press recovery
Click to expand...
Click to collapse
YES! That has worked, we are in recovery. What can i do now? Should i try flashing ViperX or is the phone not permarooted?
Last time i tried to do permroot with the Hasoon2000 tool. That didnt work and i just flashed superSU, i think i must be missing something.
Thanks so much for your help!
If you do this, you will be good. Maybe you van skip some steps because you already did them before but I mention them anyway
Download the viper x JB rom, open it with an unpack program and copy the boot.img and place it in the fastboot folder. Copy the rom.zip to the phone (mount as usb drive in the mounts & storage part of the recovery)
Now put the phone back in the bootloader and flash the boot.img
Fastboot erase cache
Fastboot flash boot boot img
Fastboot erase cache
Enter the recovery again and do a full wipe , also wipe the dalvik cache under the advanced tab. Then install the rom.zip with the
Install zip from sdcard menu !
Install the viper and choose in the aroma installer of the rom FULL WIPE and the question you get about the custom kernel you answer with NO !
Don't worry about root, the rom is standard rooted
Good to go mate
Mr Hofs said:
If you do this, you will be good. Maybe you van skip some steps because you already did them before but I mention them anyway
Download the viper x JB rom, open it with an unpack program and copy the boot.img and place it in the fastboot folder. Copy the rom.zip to the phone (mount as usb drive in the mounts & storage part of the recovery)
Now put the phone back in the bootloader and flash the boot.img
Fastboot erase cache
Fastboot flash boot boot img
Fastboot erase cache
Enter the recovery again and do a full wipe , also wipe the dalvik cache under the advanced tab. Then install the rom.zip with the
Install zip from sdcard menu !
Install the viper and choose in the aroma installer of the rom FULL WIPE and the question you get about the custom kernel you answer with NO !
Don't worry about root, the rom is standard rooted
Good to go mate
Click to expand...
Click to collapse
Thanks so much mate!
Worked flawlessly. Seriously can't thank you enough!
Nice :thumbup:
Have fun with it !
CASE CLOSED !
Related
Can anyone tell me what do I need to do to unbrick my phone.
I not really sure that my phone is bricked or what. cuz I tried to install android 4.2 but I not use Clockmod recovery and there are some problem with it. but now, when I turn my phone on, it just keep reset my phone, it doesn't show up the android screen.
Well! I try to search some unbricked topics but i don't understand how to do it.
I already got my Fastboot + ADB, RUU_ENDEAVOR_U_ICS_40_H3G_UK_1.29.771.11_Radio_1.1204.105.14H_release_260888_signed
I not really that my RUU is the lastest one or not my phone is htc one x uk, three carrier
I just need to know what do I have to do with these things :-ss
Did u flash the boot.img with fastboot.commands ???
And what recovery are u using ???
Need some more info to work with:
Bootloader unlocked?
CWM installed?
Did you flash boot.img through fastboot?
Full wipe before install?
ROM name?
Are you intending to continue installing 4.2 or go back to stock?
E:ninja'd
TToivanen said:
Need some more info to work with:
Bootloader unlocked?
CWM installed?
Did you flash boot.img through fastboot?
Full wipe before install?
ROM name?
Are you intending to continue installing 4.2 or go back to stock?
E:ninja'd
Click to expand...
Click to collapse
:banghead: :sly: here we go again ....
LOL
MarcelHofs said:
:banghead: :sly: here we go again ....
LOL
Click to expand...
Click to collapse
You can have it since you were the fist one to post. :laugh:
TToivanen said:
You can have it since you were the fist one to post. :laugh:
Click to expand...
Click to collapse
he's offline now
my phone is unlock bootloader and its unlock ... i want to continue install android 4.2
CWM installed? i didn't install what's why my fone is bricked
Did you flash boot.img through fastboot? yes I do but because i didn't have CWM so ....
Full wipe before install? i think i not
ROM name? ROM ??? I don't know
I just wonder how to get android back >"< if it 4.2 it would be good but if be back to sock then it's fine
What did you actually install to get your phone in this state?
"android 4.2" isn't good enough answer.
Sent from my HTC One X
The steps are
Unlock bootloader (check)
Flash cwm custom recovery with fastboot commands
Flash the boot.img of the desired rom with fastboot commands
Do a full wipe in recovery
Install the rom.zip in recovery
Do you understand this all ?
All I try to bricked my fone is I followed this guide >"<
http://www.theandroidsoul.com/install-android-4-2-on-your-htc-one-x-downloads-and-guide/
Click to expand...
Click to collapse
and i get stuck on step 13 because i didn't install CWM.
like what you says Flash cwm custom recovery with fastboot commands
how do I flash cwm like what you said >"<
Im sorry but I really noob on this stuff >"<
Download this file
http://db.tt/Krlm4dPs
And put it in your fastboot folder on the pc, put your phone in fastboot USB mode and do these commands
Fastboot erase cache
Fastboot flash recovery recoveryname.img
Fastboot erase cache
With this recovery you can mount the phone as USB diskdrive to copy over the rom to install. You already know how to flash the boot.img ?
nope it's would be really greats if u show me step by step like that xDDD thankss
and i don't know wt to do with boot.img >"<
start reading carefully here
http://forum.xda-developers.com/showthread.php?t=1843585
I'm off to bed now, really need to get some sleep
I'm gladly answering your questions and helping you all the way .....but it's bedtime now :thumbup:
ONE Quick question: how do i need to use these code ?? on command promt ? and 1 really stupid question is I stuck on get to the direct folder. I contain it on my C driver and on android folder...
Fastboot erase cache
Fastboot flash recovery recoveryname.img
Fastboot erase cache
1 PROBLEM
Fastboot flash recovery recoveryname.img
error can't not load "recovery"
No you guys have any complete guides on how to unbrick htc one x ? im a bit confuse on those steps u told me
The link i gave you is a full guide to flash a custom rom.....start at page 1
Really all info is there !
You need to put the recovery.img in the fastboot folder on the pc....
Navigate to the folder and open a dosprompt there
Then do the command
Fastboot devices
If your serial pops up its good ....
Otherwise you need to install HTC sync and then uninstall HTC sync and leave the drivers .... And if that doesn't work you need the java SDK platform !
Connect your HTC One X to your USB cable and then to the PC, choose Disk Drive, next, copy and paste the CWM-SuperSU-v0.94.Zip file onto the root of the SD card for your HOX. Once that's on there, change the phones USB connection to charge only.
Click to expand...
Click to collapse
i understand that but my android OS not even turn no >"< how do I suppose to change to disk drive. and I try to install sdk,htc sync manager but it doesn't work .
im on fastboot usb mode but my lap doesn't detect my fone
But i don't understand this : you flashed the boot.img with fastboot command.....why does the recovery image doesn't work then and why do you have a lost connection ?
You need to have the phone in fastboot USB mode when flashing boot.img and recovery's ! Let's get back to basic .....
At what point are you now : it's bootlooping but you can acces the bootloader ?
no im on fastboot usb mode..
like what you said and from the guide:
copy and paste the CWM-SuperSU-v0.94.Zip file onto the root of the SD card for your HOX
Click to expand...
Click to collapse
but I have problem with connect usb to the pc. it's show up at unspecified, i try to troubleshoot it but it doesn't help. .. still finding the solution
nkenny94 said:
but I have problem with connect usb to the pc. it's show up at unspecified, i try to troubleshoot it but it doesn't help. .. still finding the solution
Click to expand...
Click to collapse
Better look here then, there re more people with that what you have just described.
Hi Everyone,
I was trying to install the vemon viper x 3.3.6 (Im kind of new to flashing rom onto phones) onto my htc one x and had to update my hboot from 0.98 to 1.31 which i did with JBW tool and worked perfect and i unlocked my bootloader again but wen i was finished unlocking my bootloader i accendently factory reset my phone so it removed the vemon viper x 3.3.6 zip folder off my phone and cant run my old rom which is the vemon viper x 2.7 as it isnt a jellybean rom. So when i start my phone it loads the rom but doesn't boot. All i can get into is my hboot. My htc one x is s-on as well. Please any help would be great.
Flash a recovery, mount usb storage, copy rom to phone and flash it.
TToivanen said:
Flash a recovery, mount usb storage, copy rom to phone and flash it.
Click to expand...
Click to collapse
I flashed clockworkmod recovery onto my phone but i cant get into my phone to use the usb storage option to copy the rom onto my phone.
enter the bootloader by pressing volume - and the power button together as long as you are in the bootloader, do not let go before that.....then navigate to HBOOT - RECOVERY. it boots to recovery and activate the mount as mass storage device in the mounts and storage section (if you have CWM) if you get an error by doing that i suggest you flash the latest CWM recovery 5.8.4.0 first. older ones dont have this option !
Mr Hofs said:
enter the bootloader by pressing volume - and the power button together as long as you are in the bootloader, do not let go before that.....then navigate to HBOOT - RECOVERY. it boots to recovery and activate the mount as mass storage device in the mounts and storage section (if you have CWM) if you get an error by doing that i suggest you flash the latest CWM recovery 5.8.4.0 first. older ones dont have this option !
Click to expand...
Click to collapse
I will giv it a go, thanks for your help
rwhelan said:
I will giv it a go, thanks for your help[/QUO[/I]
I have noticed when it loads hboot it says my usb master mode cannot be accessed and asks to remove my usb cable, what does that mean??? I installed the vemon viper x rom through recovery on my fone but it keeps bring up the hboot when i turn on my fone it does booth into my fone at all and my recovery doesnt appear when i go into it just goes black booths back into my hboot. does anyone know whats going on and what should i do ( i am a bit of a noob when it comes to these things)????
Click to expand...
Click to collapse
rwhelan said:
rwhelan said:
I will giv it a go, thanks for your help[/QUO[/I]
I have noticed when it loads hboot it says my usb master mode cannot be accessed and asks to remove my usb cable, what does that mean??? I installed the vemon viper x rom through recovery on my fone but it keeps bring up the hboot when i turn on my fone it does booth into my fone at all and my recovery doesnt appear when i go into it just goes black booths back into my hboot. does anyone know whats going on and what should i do ( i am a bit of a noob when it comes to these things)????
Click to expand...
Click to collapse
That notification is normal, we all have that due to the usb cable being connected !
Did you install the rom with the cable connected ? That's a no go......always install a rom without the usb connected ! First put the phone into the bootloader, hold power and volume - until you are in. Then the fastboot command
Fastboot erase cache
From this point you disconnect the cable. enter the recovery and re-install the viper rom again.
You did flash the boot.img from the rom right ?
Click to expand...
Click to collapse
Mr Hofs said:
rwhelan said:
That notification is normal, we all have that due to the usb cable being connected !
Did you install the rom with the cable connected ? That's a no go......always install a rom without the usb connected ! First put the phone into the bootloader, hold power and volume - until you are in. Then the fastboot command
Fastboot erase cache
From this point you disconnect the cable. enter the recovery and re-install the viper rom again.
You did flash the boot.img from the rom right ?
Click to expand...
Click to collapse
It couldn't fastboot the boot.img file so decided to install it from recovery i see now that was a bit of a mistake. I will " fastboot erase cache" and fastboot the boot.img. Hope for the best
Click to expand...
Click to collapse
You need to flash the boot.img file just like a recovery . Boot.img file in the fastboot folder
In the command window
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Then unhook the cable
Enter recovery and install the rom. And for the kernel question you answer with option 1.viper x delivered !
Mr Hofs said:
You need to flash the boot.img file just like a recovery . Boot.img file in the fastboot folder
In the command window
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Then unhook the cable
Enter recovery and install the rom. And for the kernel question you answer with option 1.viper x delivered !
Click to expand...
Click to collapse
I have one last big problem, my phone is on a boot loop after trying to install my rom from recovery and the battery is too low so it wont allow me to flash anything onto my phone. What can i do???
can you still enter the recovery ? if so....put the phone in the recovery and put it on the wallcharger, then you select 1 time REBOOT RECOVERY and let it sit there. it will charge up !
Mr Hofs said:
can you still enter the recovery ? if so....put the phone in the recovery and put it on the wallcharger, then you select 1 time REBOOT RECOVERY and let it sit there. it will charge up ![/QUI
I cant get into the recovery. Is there anything i can do??
Click to expand...
Click to collapse
Yes put the phone in the bootloader and put this script in the fastboot folder. Open a command window there and type
Batt script.bat
http://db.tt/aLqeTpPO
It will continuesly reboot the bootloader and charge the phone little by little ! Until you got some power and can acces the custom recovery to charge it more !
If it does not work, remove the space in batt script.bat so it says battscript.bat .....
Mr Hofs said:
Yes put the phone in the bootloader and put this script in the fastboot folder. Open a command window there and type
Batt script.bat
http://db.tt/aLqeTpPO
It will continuesly reboot the bootloader and charge the phone little by little ! Until you got some power and can acces the custom recovery to charge it more !
If it does not work, remove the space in batt script.bat so it says battscript.bat .....
Click to expand...
Click to collapse
I am going to sound very stupid. Could you give me the exact line of command to use if the fastboot folder is saved in the local storage on the computer (c: drive), i dont want to do more damage then i have.:silly:
Example when the fastboot files are in
C:\fastboot\the fastboot files
Then you copy that battscript into that folder
Then you navigate to that folder and hold down shift and right click the mouse inside that folder, then choose "open command prompt here"
In that command prompt you type
Battscript.bat (hit enter)
And the phone should start rebooting.
If the fastboot folder is somewhere else you repeat my steps only change folder that i used.....
Mr Hofs said:
Example when the fastboot files are in
C:\fastboot\the fastboot files
Then you copy that battscript into that folder
Then you navigate to that folder and hold down shift and right click the mouse inside that folder, then choose "open command prompt here"
In that command prompt you type
Battscript.bat (hit enter)
And the phone should start rebooting.
If the fastboot folder is somewhere else you repeat my steps only change folder that i used.....
Click to expand...
Click to collapse
The file worked perfectly just opened it in the fastboot files and left it run all night. Then fastboot erase cache and the recovery is back up and running just have to flash the boot.img and phone up and running. Thanks for your help.
No problem. Glad its sorted !
Im sorry if this has been answered so many times but ive spent about 4 hours looking around and i couldnt understand half of the solutions that were out there. My problem is that i attempted to root my htc one x and i succeeded. Then i tried to put the new jellybean 4.2.2 cyanogen10.1 mod nightlies or something like that. This failed terribly. I have no back ups or anything what so ever. I dont care about anything i may have lost, i only want to get the phone working again. I know i should have researched this further before trying, but yeah... if anybody has done the same thing and solved there matter i'd be so grateful. it still responds on fastboot. heres some info on the bootloader screen. I tried factory resetting it, clearing the cache...none worked.
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.39.0000
CPLD-None
MICROP-None
Radio-5.1204.164.30H
eMMC-bootmode:disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
Dec 17 2012,13:59:37
Did you flash the boot.img from the CM10.1 rom ?
Mr Hofs said:
Did you flash the boot.img from the CM10.1 rom ?
Click to expand...
Click to collapse
well not sure what you mean but i did put the boot.img in the same folder with the adb stuff and attempted to reboot it on fastboot but the same thing happened.
Phone in the bootloader and flash the boot.img
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Did you do that from the command window on the pc ?
Mr Hofs said:
Phone in the bootloader and flash the boot.img
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Did you do that from the command window on the pc ?
Click to expand...
Click to collapse
yes however i only did the fastboot erase cache once not after the the second command. Also i wiped all the date on recovery mode. should i try the commands above again? sorry if im being a pain
Best to do is :
Full wipe in the recovery ! Then install the CM10.1 rom and directly the GAPPS. don't reboot but type in the command window
Adb reboot bootloader
Then flash the boot.img and reboot
Mr Hofs said:
Best to do is :
Full wipe in the recovery ! Then install the CM10.1 rom and directly the GAPPS. don't reboot but type in the command window
Adb reboot bootloader
Then flash the boot.img and reboot
Click to expand...
Click to collapse
thanks but how do i install the cm10.1 and gapps when i cant enter my phones mass storage on pc.
Mount is a usb drive in the recovery
Mr Hofs said:
Mount is a usb drive in the recovery
Click to expand...
Click to collapse
okay ive installed the clockwork mod and im trying to enter the phones sotrage on pc, but i cant seem to do it. which option is it. mount/sdcard and mount/usb storage dont work
What recovery do have ? Version number ?
https://www.dropbox.com/s/guvfqd7tp8acxg6/recovery 5.8.4.0.img
Flash this one and go to mounts and storage and tap the last option in the list
Please help me..
Hi, same problem here..
my phone got stuck on the startup screen (HTC quietly brilliant). But my case is different because im a total noob, newly registered here. I bought my htc one x that is already in CM10 jellybean mode. last night i got a notification for cm10 update, I just click it without thinking much (cause im a noob) then after rebooting it just freezes... I hope senior members here can help me, i reallly dont want to lose my data..
You probably updated to CM10.1. You need to take the update's boot.img and flash it in fastboot.
Sent from my One X using xda premium
TToivanen said:
You probably updated to CM10.1. You need to take the update's boot.img and flash it in fastboot.
Sent from my One X using xda premium
Click to expand...
Click to collapse
many thanks for replying me..
sorry but im totally clueless at this point, i spent all night reading posts, watching videos.. i've seen the same advice (flash boot.img in fastboot) in several places, but still dont know how to do it .. I would be very very grateful if someone can guide me step by step to do this
You place the boot.img file from the CM10 rom.zip (its inside) in the fastboot folder on the pc, then you put the phone in the bootloader
Open the command window in the fastboot folder(point in the fastboot folder hold down shift + right mouse button- open command window here) and type
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Mr Hofs said:
You place the boot.img file from the CM10 rom.zip (its inside) in the fastboot folder on the pc, then you put the phone in the bootloader
Open the command window in the fastboot folder(point in the fastboot folder hold down shift + right mouse button- open command window here) and type
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Click to expand...
Click to collapse
Does it usually took a long time for every command to complete? im entering fastboot erase cache and <waiting for device> appear and its still there right now..
just to be sure, the bootloader mode is when the HBOOT is highlighted blue am i right?
oh i hate myself..
It should say
Fastboot usb in red text above that
In bootloader you should highlight fastboot using volume keys and press power. Then fastboot mode should be engaged and FASTBOOT USB text visible.
Sent from my One X using xda premium
Mr Hofs said:
It should say
Fastboot usb in red text above that
Click to expand...
Click to collapse
now i have fastboot usb in red and "<waiting for devices>" still there. any thoughts?? does this mean the PC doesn't recognize my phone or it I should wait longer?
Do you have HTC syncmanager installed on the pc ? Uninstall it but leave the drivers when asked !
Reboot the pc and the bootloader....check again.
And you should have a myhtc in the device manager when the phone is plugged in the pc
Mr Hofs said:
What recovery do have ? Version number ?
https://www.dropbox.com/s/guvfqd7tp8acxg6/recovery 5.8.4.0.img
Flash this one and go to mounts and storage and tap the last option in the list
Click to expand...
Click to collapse
i have version 5.8.4.0, i went to the last option and it still does not come up on the pc
I have an international One x, I don't know what I did wrong but my phone never gets past the ROM's logo screen. I've tried flashing about 6 different ROMs that all worked before but the boot.img file never flashes. When I type the command in fastboot, it says it flashed successfully on the pc but the phone just shuts down. When I open it again, it doesn't boot. I also tried restoring to a stock nandroid backup (from here: http://forum.xda-developers.com/show....php?t=1975140 ) and. I tried restoring to a backup I'd made a month ago but neither worked.
I tried looking for a RUU to run but none worked or are compatible because I can't find one higher than 3.16 and I have S-ON so can't flash anything below that. I looked on the internet in general and here http://www.androidruu.com/?developer=Endeavor
Info about the phone:
It's S-ON with an unlocked bootloader
hboot 1.39.0000
CID HTC__J15
Software version 3.16.415.4
radio-5.1204.162.29
Posting here is a last resort, I've tried everything I can think of over the past 3 weeks and I don't know what to do
Hadya said:
I have an international One x, I don't know what I did wrong but my phone never gets past the ROM's logo screen. I've tried flashing about 6 different ROMs that all worked before but the boot.img file never flashes. When I type the command in fastboot, it says it flashed successfully on the pc but the phone just shuts down. When I open it again, it doesn't boot. I also tried restoring to a stock nandroid backup (from here: http://forum.xda-developers.com/show....php?t=1975140 ) and. I tried restoring to a backup I'd made a month ago but neither worked.
I tried looking for a RUU to run but none worked or are compatible because I can't find one higher than 3.16 and I have S-ON so can't flash anything below that. I looked on the internet in general and here http://www.androidruu.com/?developer=Endeavor
Info about the phone:
It's S-ON with an unlocked bootloader
hboot 1.39.0000
CID HTC__J15
Software version 3.16.415.4
radio-5.1204.162.29
Posting here is a last resort, I've tried everything I can think of over the past 3 weeks and I don't know what to do
Click to expand...
Click to collapse
Wow what a poem first thing as you may know, flashing the boot.img is a really important step to do if you want your rom to work... I see that you can't do it but i have just a question, does your phone shuts down immediately after you type the command or at the end of the flashing process?
Sent from my HTC One X using xda app-developers app
matt95 said:
Wow what a poem first thing as you may know, flashing the boot.img is a really important step to do if you want your rom to work... I see that you can't do it but i have just a question, does your phone shuts down immediately after you type the command or at the end of the flashing process?
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Shuts down the second I press enter.
The only other thing I can think of is trying to flash the ROM whose boot.img last successfully flashed but I don't know which one that is. Is there a way to find out?
Hadya said:
Shuts down the second I press enter.
The only other thing I can think of is trying to flash the ROM whose boot.img last successfully flashed but I don't know which one that is. Is there a way to find out?
Click to expand...
Click to collapse
That could be a solution but there's no way to find out the Rom you've installed previously...
matt95 said:
That could be a solution but there's no way to find out the Rom you've installed previously...
Click to expand...
Click to collapse
Okay. Do you have any suggestions then?
Is there a way that I can change the files inside the RUU?
Hadya said:
Is there a way that I can change the files inside the RUU?
Click to expand...
Click to collapse
Don't think so, and it would be very dangerous for your phone
matt95 said:
Don't think so, and it would be very dangerous for your phone
Click to expand...
Click to collapse
So I should just give up for now and wait for a suitable RUU?
Hadya said:
So I should just give up for now and wait for a suitable RUU?
Click to expand...
Click to collapse
That's your only option as long as i know
Maybe you can try on a different pc or reinstall drivers?
Sent from my HTC One X using xda app-developers app
Stefan0vic said:
Maybe you can try on a different pc or reinstall drivers?
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
I've tried re-installing the drivers but I don't see how a different pc would help since there are no compatible RUUs
You can use a nandroid backup
http://forum.xda-developers.com/showthread.php?t=1975140
Sent from my HTC One X using xda app-developers app
Hi Hadya!
I guess you should start from scratch. U will lost all data on your device but after all it is working again.
!!! IMPORTANT !!!
1. Make sure your device is fully charged for this. Otherwise it will be a big stress to get it back to work.
2. Copy all data from the SDCard away because you will loose EVERYTHING!!!
3. You need your unlock_token.bin to unlock your device again. If you don't have it available please request this from the HTC web site.
Now, let's recover your device...
1. Download this file and extract it.
http://ul.to/j4j1cpft
2. Enter fastboot
Press POWER & VOLUME DOWN KEY and enter the bootloader
3. Connect your device to PC for the 1st Recover
Test if your device is available via fastboot and use this command:
fastboot devices
You should see your device with Serial number
Now lock your device back with command:
fastboot oem lock
You will see a short message and your bootloader is locked. You should see the message on top of the bootloader with RELOCKED.
That's fine.
Now start the ARUWIZARD from the downloade ZIP file and flash your device as you know it.
There is a ROM file inside which is same as your current hboot. This flash procedure will allign your partitions on the device and it might be that you will loose all SDCard files. I'm pretty sure that you will loose it.
The ROM contains only hboot, recovery and boot Images but it will "RECOVER" your device.
4. Unlock your device
After this procedure you are ready to unlock your device again. Enter fastboot and flash your unlock token again.
fastboot flash unlocktoken unlock_token.bin
After the device is unlocked flash boot and recovery image of your choice within this way:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot erase Cache
After this you have a half running device.
5. Second Recover Step
Now you need to do a final repair for the device. For this you need to download Android Revolution HD 31.x ROM.
1. Put this ROM on your SDCard
2. Enter recovery and flash this ROM
3. Flash the boot.img to your device
4. Start your device and ignore the 1st Setup steps.
5. Now go to:
SETTINGS > Backup & reset > Reset phone (touch this)
6. On the next page scroll down to the bottom and select:
"Erase Music, Picture... on the storage"
7. Press "OK" and wait
When the phone is back again device is fully recovered. The SDCard is reformated and all partitons are back again.
Now you can do everything you want with your device again.
Best regards!
MrT69 said:
Hi Hadya!
I guess you should start from scratch. U will lost all data on your device but after all it is working again.
!!! IMPORTANT !!!
1. Make sure your device is fully charged for this. Otherwise it will be a big stress to get it back to work.
2. Copy all data from the SDCard away because you will loose EVERYTHING!!!
3. You need your unlock_token.bin to unlock your device again. If you don't have it available please request this from the HTC web site.
Now, let's recover your device...
1. Download this file and extract it.
http://ul.to/j4j1cpft
2. Enter fastboot
Press POWER & VOLUME DOWN KEY and enter the bootloader
3. Connect your device to PC for the 1st Recover
Test if your device is available via fastboot and use this command:
fastboot devices
You should see your device with Serial number
Now lock your device back with command:
fastboot oem lock
You will see a short message and your bootloader is locked. You should see the message on top of the bootloader with RELOCKED.
That's fine.
Now start the ARUWIZARD from the downloade ZIP file and flash your device as you know it.
There is a ROM file inside which is same as your current hboot. This flash procedure will allign your partitions on the device and it might be that you will loose all SDCard files. I'm pretty sure that you will loose it.
The ROM contains only hboot, recovery and boot Images but it will "RECOVER" your device.
4. Unlock your device
After this procedure you are ready to unlock your device again. Enter fastboot and flash your unlock token again.
fastboot flash unlocktoken unlock_token.bin
After the device is unlocked flash boot and recovery image of your choice within this way:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot erase Cache
After this you have a half running device.
5. Second Recover Step
Now you need to do a final repair for the device. For this you need to download Android Revolution HD 31.x ROM.
1. Put this ROM on your SDCard
2. Enter recovery and flash this ROM
3. Flash the boot.img to your device
4. Start your device and ignore the 1st Setup steps.
5. Now go to:
SETTINGS > Backup & reset > Reset phone (touch this)
6. On the next page scroll down to the bottom and select:
"Erase Music, Picture... on the storage"
7. Press "OK" and wait
When the phone is back again device is fully recovered. The SDCard is reformated and all partitons are back again.
Now you can do everything you want with your device again.
Best regards!
Click to expand...
Click to collapse
I'm facing a tiny problem with running the ARUWizard. It says my phone's battery is below 30% and won't flash every time although I fully charged it till the light turned green.
Hmmm... this seems to be a tricky thing.
Try this:
1. Copy the rom.zip into the same Folder where your fastboot.exe is located
2. Enter bootloader and go to fastboot.
3. Flash the file with this command:
fastboot flash zip rom.zip
4. Enter the original recovery
5. When you see the red triangle than do a short press on the power button and vol up and you will see the menue as same as you know it from the CWM Recovery
6. Wipe Cache
7. Wipe data/factory
8. unlock the bootloader
9. Flash the rom.img from AHD Image
fastboot flash boot boot.img
10. Flash CWM recovery
fastboot flash recovery recovery.img
11. enter Recovery and Mount USB
12. Copy the AHD ROM to your device & flash it
13. Boot the ROM, wait up to 10 minutes bevore you use it & ignore the setup
14. Within the Phone enter Settings and do a FACTORY RESET
MrT69 said:
Hmmm... this seems to be a tricky thing.
Try this:
1. Copy the rom.zip into the same Folder where your fastboot.exe is located
2. Enter bootloader and go to fastboot.
3. Flash the file with this command:
fastboot flash zip rom.zip
4. Enter the original recovery
5. When you see the red triangle than do a short press on the power button and vol up and you will see the menue as same as you know it from the CWM Recovery
6. Wipe Cache
7. Wipe data/factory
8. unlock the bootloader
9. Flash the rom.img from AHD Image
fastboot flash boot boot.img
10. Flash CWM recovery
fastboot flash recovery recovery.img
11. enter Recovery and Mount USB
12. Copy the AHD ROM to your device & flash it
13. Boot the ROM, wait up to 10 minutes bevore you use it & ignore the setup
14. Within the Phone enter Settings and do a FACTORY RESET
Click to expand...
Click to collapse
I tried that but it just says this in cmd when I try to flash the rom.zip
sending 'zip' (12882 KB)...
OKAY [ 1.654s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 1.864s
Hadya said:
I tried that but it just says this in cmd when I try to flash the rom.zip
sending 'zip' (12882 KB)...
OKAY [ 1.654s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 1.864s
Click to expand...
Click to collapse
Sorry!!!!!
This is the wrong way. Use this command:
fastboot oem rebootRUU fastboot flash zip rom.zip
MrT69 said:
Sorry!!!!!
This is the wrong way. Use this command:
fastboot oem rebootRUU fastboot flash zip rom.zip
Click to expand...
Click to collapse
Okay. It worked! Thank you!
Hadya said:
Okay. It worked! Thank you!
Click to expand...
Click to collapse
Is everything now working again?
Yes! All working. Thanks.
So, I tried to get the latest Cyanogenmod on my phone.
Resulted in the the process com.android.phone has stopped issue.
FInally managed to get around that but no my phone is stuck with no CWM, no USB Windows fileshare and a HTC bootscreen.
I have searched, and read a lot of posts and the closes thing to recovery is a post on putting on a Nandroid backup for my Y13 (http://forum.xda-developers.com/showthread.php?t=1975140)
But, since I have no USB fileshare I am unable to get it on the phone and start the process.
Can anybody point me in the right direction?
I need to completely wipe and reinstall everything but has no access other that fastboot USB.
What info should I post and how do I find it if more is needed.
smurf69 said:
So, I tried to get the latest Cyanogenmod on my phone.
Resulted in the the process com.android.phone has stopped issue.
FInally managed to get around that but no my phone is stuck with no CWM, no USB Windows fileshare and a HTC bootscreen.
I have searched, and read a lot of posts and the closes thing to recovery is a post on putting on a Nandroid backup for my Y13 (http://forum.xda-developers.com/showthread.php?t=1975140)
But, since I have no USB fileshare I am unable to get it on the phone and start the process.
Can anybody point me in the right direction?
I need to completely wipe and reinstall everything but has no access other that fastboot USB.
What info should I post and how do I find it if more is needed.
Click to expand...
Click to collapse
Download Philz recovery and flash via fastboot. After this go in recovery and mound the sd card and wait 3-4 min. copy your rom on SD card flash the rom and flash the boot.img!
Thant said:
Download Philz recovery and flash via fastboot. After this go in recovery and mound the sd card and wait 3-4 min. copy your rom on SD card flash the rom and flash the boot.img!
Click to expand...
Click to collapse
Thanks Thant!
So, I have downloaded Philz, I think I have flashed the recovery.img file over to the phone from CMD shell window.
I have rebooted my phone to fastboot menu and selectet recovery.
The result is still the same. Just the htc boot screen.
I`m sure I`m doing something wrong but cant figure out how. Philz How to uses USB / PC file transfer so I`m unable to use it as a step by step.
Would really appreciate a step by step command overview. If possible with an explanation so that I learn why I do the different commands. Then I wont be so f.. ignorant about these things anymore. Hopefully
smurf69 said:
Thanks Thant!
So, I have downloaded Philz, I think I have flashed the recovery.img file over to the phone from CMD shell window.
I have rebooted my phone to fastboot menu and selectet recovery.
The result is still the same. Just the htc boot screen.
I`m sure I`m doing something wrong but cant figure out how. Philz How to uses USB / PC file transfer so I`m unable to use it as a step by step.
Would really appreciate a step by step command overview. If possible with an explanation so that I learn why I do the different commands. Then I wont be so f.. ignorant about these things anymore. Hopefully
Click to expand...
Click to collapse
The command to flash the recovery is fastboot flash recovery recovery.img you must to put recovery.img in your fastboot directory and you can run the command fastboot erase cache after this go in bootloader and choice the recovery this is all
Thant said:
The command to flash the recovery is fastboot flash recovery recovery.img you must to put recovery.img in your fastboot directory and you can run the command fastboot erase cache after this go in bootloader and choice the recovery this is all
Click to expand...
Click to collapse
Again, thanks!!
Forgot my phone at work so I`ll have a go tomorrow!
This issue will remain unsolved.
The phone no longer charges so I am unable to start any process what so ever.
Thank you so much for the help I got
smurf69 said:
This issue will remain unsolved.
The phone no longer charges so I am unable to start any process what so ever.
Thank you so much for the help I got
Click to expand...
Click to collapse
there is also a zip with a .bat file to charge in fastboot ...it should all work...as it was said before fastboot flash recovery recovery.img and fastboot erase cache...if nothng works then do the factory reset through bootloader helps often...if not working...hm try to find latest RUU for your CID which ould work...if already on hboot 1.7x only RUU from 3.14 and up would work
One-X-master said:
there is also a zip with a .bat file to charge in fastboot ...it should all work...as it was said before fastboot flash recovery recovery.img and fastboot erase cache...if nothng works then do the factory reset through bootloader helps often...if not working...hm try to find latest RUU for your CID which ould work...if already on hboot 1.7x only RUU from 3.14 and up would work
Click to expand...
Click to collapse
Thanks, but the phone is completely dead and unable to boot.
There is no power and the phone won`t charge so I guess it`s a gonner.
smurf69 said:
Thanks, but the phone is completely dead and unable to boot.
There is no power and the phone won`t charge so I guess it`s a gonner.
Click to expand...
Click to collapse
Search the forums, there are answers to get your device back to live. Like the charging script.