[Q] Trying to install CM10 - HTC One X

I tried to root and install CM10 on my HTC One X (AT&T) (v2.20). However, I have run into trouble. Here is what happened:
Successfully rooted phone using Hasooon2000's All-in-one Kit
Flashed Recovery Successfully (I think) using the All-in-one Kit
I'm now able to boot into "TWRP" but I'm not really sure what to do next.

It skips your HBOOT too?

SharkDog2 said:
It skips your HBOOT too?
Click to expand...
Click to collapse
Yes, unfortunately.

Is the phone an evita or endevour? (quad core or dual core). What recovery did you flash? CWM or TWRP?
Try connecting the phone through usb and go to your adb folder and type in cmd: fastboot devices / fastboot list devices see if it is recognized.
Also try holding the power button and volume down button for 1 minute, it might reboot a few times and go back to the screen but I think it should jump back to your Hboot.

SharkDog2 said:
Is the phone an evita or endevour? (quad core or dual core). What recovery did you flash? CWM or TWRP?
Try connecting the phone through usb and go to your adb folder and type in cmd: fastboot devices / fastboot list devices see if it is recognized.
Also try holding the power button and volume down button for 1 minute, it might reboot a few times and go back to the screen but I think it should jump back to your Hboot.
Click to expand...
Click to collapse
Thanks! Okay, I was able to get to TWRP but I'm not sure what to do next.

Well if you are in the recovery now make sure the rom you have downloaded is on your phone.
First open the rom.zip in your computer and take out the file called boot.img. Put this file in your fastboot folder.
Now boot your phone back into fastboot mode
then run this in cmd. "fastboot flast boot boot.img" from the folder your fastboot is located etc. if you are using the boot.img flasher from the rom make sure to put the boot.img there
It will send the boot.img to your phone and say if it is succesful.
Next boot back into your recovery and install the rom zip from inside the recovery.

wrong section, don't flash anything here..

Wrong Forum1!
Bro u have a dual core(At&t) version.The hardware is totally different ..Please post in in the thread for ur phone.
Dont flash anything from here!

Thanks! This worked. I'm now running Jelly Bean -- way better than all that AT&T garbage!
SharkDog2 said:
Well if you are in the recovery now make sure the rom you have downloaded is on your phone.
First open the rom.zip in your computer and take out the file called boot.img. Put this file in your fastboot folder.
Now boot your phone back into fastboot mode
then run this in cmd. "fastboot flast boot boot.img" from the folder your fastboot is located etc. if you are using the boot.img flasher from the rom make sure to put the boot.img there
It will send the boot.img to your phone and say if it is succesful.
Next boot back into your recovery and install the rom zip from inside the recovery.
Click to expand...
Click to collapse

Related

[Q] HTC One X Possibly Bricked

Hi all,
I think my friend and i bricked his phone last night.
Its the HTC one x and we used the Hasoon2000 method. I think the problem was the perm root part of the software said unable to connect to device.
I searched around and someone said to flash supersu and that should do it. However after flashing that we did a backup of the phone in clockwork recovery.
We then tried flashing the viperX rom which we did on another one X and worked fine, it got to 1% and restarted. It then stuck at the quietly brilliant page.
We can't get it to boot into recovery but can get it to go to the bootloader. We tried to do the fastboot command from the PC to erase fastboot cache but it couldnt connect to the device.
I have read this thread http://forum.xda-developers.com/showthread.php?t=1764421 and but it is about the AT&T version, what recovery image would i need?
Also how can i tell if it is hard bricked or soft bricked? As i'm worried it could be hard bricked cause i couldnt erase the fastboot cache.
Any help is appreciated, and sorry if this is answered somewhere else but i couldnt see an answer.
Bit more bootloader info:
Unlocked
S-On
Hboot 1.39.0000
If possible i'd like to help my friend finish rooting it but if its easier put it back to normal.
Again thanks if anyone can help me.
What does the bootloader say, EVITA or ENDEAVORU ?
It says endeavoru
Then stay away from the HTC one XL forum, its a different phone !!!
Do you have the HTC drivers installed and a folder on the pc with the fastboot files ?
Place these files in a folder like this
http://db.tt/ldx3qOOU
C:\fastboot\files i gave you
Then put the phone in the bootloader and open a command prompt inside the fastboot folder on the pc and type
Fastboot devices
If a serial comes up we are good to go !
Mr Hofs said:
Then stay away from the HTC one XL forum, its a different phone !!!
Do you have the HTC drivers installed and a folder on the pc with the fastboot files ?
Place these files in a folder like this
http://db.tt/ldx3qOOU
C:\fastboot\files i gave you
Then put the phone in the bootloader and open a command prompt inside the fastboot folder on the pc and type
Fastboot devices
If a serial comes up we are good to go !
Click to expand...
Click to collapse
Well we installed the HTC drivers with the Hasoon tool so yes. Just meeting my friend now so i'll put these files in a folder and try that straight away.
Thanks, will let you know shortly.
DannyBLOL said:
Well we installed the HTC drivers with the Hasoon tool so yes. Just meeting my friend now so i'll put these files in a folder and try that straight away.
Thanks, will let you know shortly.
Click to expand...
Click to collapse
Just connected it to my laptop and the pc said fastboot drivers installed and made the noise of a device connecting and disconnecting.
Haven't tried what you said yet as it said battery is too low on the bootloader. I've now plugged it in a plug socket and have it on the htc quietly brilliant screen. I take it this should still charge it?
DannyBLOL said:
Just connected it to my laptop and the pc said fastboot drivers installed and made the noise of a device connecting and disconnecting.
Haven't tried what you said yet as it said battery is too low on the bootloader. I've now plugged it in a plug socket and have it on the htc quietly brilliant screen. I take it this should still charge it?
Click to expand...
Click to collapse
Is it possible for you to turn the phone off?
IF so it should charge a bit quicker that way
Also just to clarify, how did you try to install Viper X on your phone?
Hmm no, if its bootlooping then yes. Is the bootloader unkocked and do you have a custom recovery installed yet ?
In case you have a custom recovery installed put the phone in the recovery it will charge the batt in there .....
Otherwise put the phone in the bootloader and run this file from within the fastboot folder
http://db.tt/aLqeTpPO
It will continuously reboot the phone and charge it little by little, leave it like this for an hour or so.
No, if i go into bootloader and fastboot then power down it turns itself back on if its plugged in.
Mr Hofs said:
Hmm no, if its bootlooping then yes. Is the bootloader unkocked and do you have a custom recovery installed yet ?
In case you have a custom recovery installed put the phone in the recovery it will charge the batt in there .....
Otherwise put the phone in the bootloader and run this file from within the fastboot folder
http://db.tt/aLqeTpPO
It will continuously reboot the phone and charge it little by little, leave it like this for an hour or so.
Click to expand...
Click to collapse
The bootloader says unlocked, and we had CWM recovery installed it no longer loads up, it just reboots itself.
I'm confused by what you mean, what command would i use to run that file from the fastboot folder and after doing that do you mean i should leave it charging from the laptop?
Link to image of the bootloader if this helps - http://imgbin.org/index.php?page=image&id=11217
Just connect the phone to the pc and put the phone in the bootloader then execute the .bat file from the fastboot folder (download it and move it in there)
It should start rebooting the phone over and over again.
Edit : I see fastboot usb in the bootloader that's good ! :thumbup:
We need to get the batt charged so we can reflash the recovery, that will probably solve it all.
Mr Hofs said:
Just connect the phone to the pc and put the phone in the bootloader then execute the .bat file from the fastboot folder (download it and move it in there)
It should start rebooting the phone over and over again
Click to expand...
Click to collapse
Ok this is working. It doesn't say about low battery anymore on the bootloader. But ill leave it charging for a bit. What is my next step?
Next step is to reflash the recovery, download this one
http://db.tt/Krlm4dPs
Rename it to recovery.img and Copy the file in the fastboot folder. Put the phone in the bootloader again and flash the recovery
All these commands are executed from the command prompt inside the fastboot folder.
Fastboot erase cache
Fastboot flash recovery recovery.img
Fastboot erase cache
Then enter the recovery by pressing hboot one time (confirm with powerbutton) then press recovery
Ignore me Mr Hoffs beat me to it
Mr Hofs said:
Next step is to reflash the recovery, download this one
http://db.tt/Krlm4dPs
Rename it to recovery.img and Copy the file in the fastboot folder. Put the phone in the bootloader again and flash the recovery
All these commands are executed from the command prompt inside the fastboot folder.
Fastboot erase cache
Fastboot flash recovery recovery.img
Fastboot erase cache
Then enter the recovery by pressing hboot one time (confirm with powerbutton) then press recovery
Click to expand...
Click to collapse
YES! That has worked, we are in recovery. What can i do now? Should i try flashing ViperX or is the phone not permarooted?
Last time i tried to do permroot with the Hasoon2000 tool. That didnt work and i just flashed superSU, i think i must be missing something.
Thanks so much for your help!
If you do this, you will be good. Maybe you van skip some steps because you already did them before but I mention them anyway
Download the viper x JB rom, open it with an unpack program and copy the boot.img and place it in the fastboot folder. Copy the rom.zip to the phone (mount as usb drive in the mounts & storage part of the recovery)
Now put the phone back in the bootloader and flash the boot.img
Fastboot erase cache
Fastboot flash boot boot img
Fastboot erase cache
Enter the recovery again and do a full wipe , also wipe the dalvik cache under the advanced tab. Then install the rom.zip with the
Install zip from sdcard menu !
Install the viper and choose in the aroma installer of the rom FULL WIPE and the question you get about the custom kernel you answer with NO !
Don't worry about root, the rom is standard rooted
Good to go mate
Mr Hofs said:
If you do this, you will be good. Maybe you van skip some steps because you already did them before but I mention them anyway
Download the viper x JB rom, open it with an unpack program and copy the boot.img and place it in the fastboot folder. Copy the rom.zip to the phone (mount as usb drive in the mounts & storage part of the recovery)
Now put the phone back in the bootloader and flash the boot.img
Fastboot erase cache
Fastboot flash boot boot img
Fastboot erase cache
Enter the recovery again and do a full wipe , also wipe the dalvik cache under the advanced tab. Then install the rom.zip with the
Install zip from sdcard menu !
Install the viper and choose in the aroma installer of the rom FULL WIPE and the question you get about the custom kernel you answer with NO !
Don't worry about root, the rom is standard rooted
Good to go mate
Click to expand...
Click to collapse
Thanks so much mate!
Worked flawlessly. Seriously can't thank you enough!
Nice :thumbup:
Have fun with it !
CASE CLOSED !

[Q] HELP HELP Upgrading hboot gone bad

Hi Everyone,
I was trying to install the vemon viper x 3.3.6 (Im kind of new to flashing rom onto phones) onto my htc one x and had to update my hboot from 0.98 to 1.31 which i did with JBW tool and worked perfect and i unlocked my bootloader again but wen i was finished unlocking my bootloader i accendently factory reset my phone so it removed the vemon viper x 3.3.6 zip folder off my phone and cant run my old rom which is the vemon viper x 2.7 as it isnt a jellybean rom. So when i start my phone it loads the rom but doesn't boot. All i can get into is my hboot. My htc one x is s-on as well. Please any help would be great.
Flash a recovery, mount usb storage, copy rom to phone and flash it.
TToivanen said:
Flash a recovery, mount usb storage, copy rom to phone and flash it.
Click to expand...
Click to collapse
I flashed clockworkmod recovery onto my phone but i cant get into my phone to use the usb storage option to copy the rom onto my phone.
enter the bootloader by pressing volume - and the power button together as long as you are in the bootloader, do not let go before that.....then navigate to HBOOT - RECOVERY. it boots to recovery and activate the mount as mass storage device in the mounts and storage section (if you have CWM) if you get an error by doing that i suggest you flash the latest CWM recovery 5.8.4.0 first. older ones dont have this option !
Mr Hofs said:
enter the bootloader by pressing volume - and the power button together as long as you are in the bootloader, do not let go before that.....then navigate to HBOOT - RECOVERY. it boots to recovery and activate the mount as mass storage device in the mounts and storage section (if you have CWM) if you get an error by doing that i suggest you flash the latest CWM recovery 5.8.4.0 first. older ones dont have this option !
Click to expand...
Click to collapse
I will giv it a go, thanks for your help
rwhelan said:
I will giv it a go, thanks for your help[/QUO[/I]
I have noticed when it loads hboot it says my usb master mode cannot be accessed and asks to remove my usb cable, what does that mean??? I installed the vemon viper x rom through recovery on my fone but it keeps bring up the hboot when i turn on my fone it does booth into my fone at all and my recovery doesnt appear when i go into it just goes black booths back into my hboot. does anyone know whats going on and what should i do ( i am a bit of a noob when it comes to these things)????
Click to expand...
Click to collapse
rwhelan said:
rwhelan said:
I will giv it a go, thanks for your help[/QUO[/I]
I have noticed when it loads hboot it says my usb master mode cannot be accessed and asks to remove my usb cable, what does that mean??? I installed the vemon viper x rom through recovery on my fone but it keeps bring up the hboot when i turn on my fone it does booth into my fone at all and my recovery doesnt appear when i go into it just goes black booths back into my hboot. does anyone know whats going on and what should i do ( i am a bit of a noob when it comes to these things)????
Click to expand...
Click to collapse
That notification is normal, we all have that due to the usb cable being connected !
Did you install the rom with the cable connected ? That's a no go......always install a rom without the usb connected ! First put the phone into the bootloader, hold power and volume - until you are in. Then the fastboot command
Fastboot erase cache
From this point you disconnect the cable. enter the recovery and re-install the viper rom again.
You did flash the boot.img from the rom right ?
Click to expand...
Click to collapse
Mr Hofs said:
rwhelan said:
That notification is normal, we all have that due to the usb cable being connected !
Did you install the rom with the cable connected ? That's a no go......always install a rom without the usb connected ! First put the phone into the bootloader, hold power and volume - until you are in. Then the fastboot command
Fastboot erase cache
From this point you disconnect the cable. enter the recovery and re-install the viper rom again.
You did flash the boot.img from the rom right ?
Click to expand...
Click to collapse
It couldn't fastboot the boot.img file so decided to install it from recovery i see now that was a bit of a mistake. I will " fastboot erase cache" and fastboot the boot.img. Hope for the best
Click to expand...
Click to collapse
You need to flash the boot.img file just like a recovery . Boot.img file in the fastboot folder
In the command window
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Then unhook the cable
Enter recovery and install the rom. And for the kernel question you answer with option 1.viper x delivered !
Mr Hofs said:
You need to flash the boot.img file just like a recovery . Boot.img file in the fastboot folder
In the command window
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Then unhook the cable
Enter recovery and install the rom. And for the kernel question you answer with option 1.viper x delivered !
Click to expand...
Click to collapse
I have one last big problem, my phone is on a boot loop after trying to install my rom from recovery and the battery is too low so it wont allow me to flash anything onto my phone. What can i do???
can you still enter the recovery ? if so....put the phone in the recovery and put it on the wallcharger, then you select 1 time REBOOT RECOVERY and let it sit there. it will charge up !
Mr Hofs said:
can you still enter the recovery ? if so....put the phone in the recovery and put it on the wallcharger, then you select 1 time REBOOT RECOVERY and let it sit there. it will charge up ![/QUI
I cant get into the recovery. Is there anything i can do??
Click to expand...
Click to collapse
Yes put the phone in the bootloader and put this script in the fastboot folder. Open a command window there and type
Batt script.bat
http://db.tt/aLqeTpPO
It will continuesly reboot the bootloader and charge the phone little by little ! Until you got some power and can acces the custom recovery to charge it more !
If it does not work, remove the space in batt script.bat so it says battscript.bat .....
Mr Hofs said:
Yes put the phone in the bootloader and put this script in the fastboot folder. Open a command window there and type
Batt script.bat
http://db.tt/aLqeTpPO
It will continuesly reboot the bootloader and charge the phone little by little ! Until you got some power and can acces the custom recovery to charge it more !
If it does not work, remove the space in batt script.bat so it says battscript.bat .....
Click to expand...
Click to collapse
I am going to sound very stupid. Could you give me the exact line of command to use if the fastboot folder is saved in the local storage on the computer (c: drive), i dont want to do more damage then i have.:silly:
Example when the fastboot files are in
C:\fastboot\the fastboot files
Then you copy that battscript into that folder
Then you navigate to that folder and hold down shift and right click the mouse inside that folder, then choose "open command prompt here"
In that command prompt you type
Battscript.bat (hit enter)
And the phone should start rebooting.
If the fastboot folder is somewhere else you repeat my steps only change folder that i used.....
Mr Hofs said:
Example when the fastboot files are in
C:\fastboot\the fastboot files
Then you copy that battscript into that folder
Then you navigate to that folder and hold down shift and right click the mouse inside that folder, then choose "open command prompt here"
In that command prompt you type
Battscript.bat (hit enter)
And the phone should start rebooting.
If the fastboot folder is somewhere else you repeat my steps only change folder that i used.....
Click to expand...
Click to collapse
The file worked perfectly just opened it in the fastboot files and left it run all night. Then fastboot erase cache and the recovery is back up and running just have to flash the boot.img and phone up and running. Thanks for your help.
No problem. Glad its sorted !

[Q] SD card appears empty, and phone is stuck on load screen.

A buddy of mine rooted my phone after I had so much difficulty trying to do it myself. I went to update my ROM this afternoon and was brought to the white HTC loading screen with no more activity. Tried getting into my phone to put a new ROM on the SD card and nothing comes up on the SD card folder. I am able to put a ROM in the empty SD card folder and install it, but than it just gets stuck on the same screen as before. I'm really just in the dark here and that friend isn't any longer available to help me out. Thank you all in advance, hopefully this is fixable. I am quite concerned. I should add that I would like to ultimately just get back to stock and be done with things I don't understand so as to avoid this happening again.
Did you flash the boot.img from the rom.zip? These are the correct steps to flash a ROM:
1. Flash the boot.img from ROM.zip via fastboot. "fastboot flash boot boot.img" then "fastboot erase cache"
2. Boot into recovery and use THIS by flashing it.
3. Now flash the ROM.zip and then gapps.zip via recovery.
4. Reboot.
vin4yak said:
Did you flash the boot.img from the rom.zip? These are the correct steps to flash a ROM:
1. Flash the boot.img from ROM.zip via fastboot. "fastboot flash boot boot.img" then "fastboot erase cache"
2. Boot into recovery and use ]THIS[/URL] by flashing it.
3. Now flash the ROM.zip and then gapps.zip via recovery.
4. Reboot.
Click to expand...
Click to collapse
I have tried flashing the boot.img but when I go to put the file onto my phone I don't have any folders such as the boot.img folder to put it in. As for flashing the link above, I am taking a stab in the dark here but I assume that I download that link, extract it and place it on my SD card somewhere. I'm not sure as to how I flash it. Sorry... I really have tried learning the ropes of this, but I can't seem to grasp it.
I somehow now have access to TWRP on my device... I am so confused.
Scalliedhooligan said:
I have tried flashing the boot.img but when I go to put the file onto my phone I don't have any folders such as the boot.img folder to put it in. As for flashing the link above, I am taking a stab in the dark here but I assume that I download that link, extract it and place it on my SD card somewhere. I'm not sure as to how I flash it. Sorry... I really have tried learning the ropes of this, but I can't seem to grasp it.
Click to expand...
Click to collapse
1. First you need to download a custom ROM like this one : http://tunsd.de/downloads/ICJ/IceColdJelly421/aokp_ICJ422-V3.0.zip , Gapps : http://goo.im/gapps/gapps-jb-20130301-signed.zip and Super wipe script: https://www.dropbox.com/s/0y31poo1kiaif4y/Super wipe script.zip
2. Open the aokp_ICJ422-V3.0.zip with winrar/winzip and extract the boot.img and place it in the "fastboot" folder in your PC. (since you have already unlocked/rooted it, I guess you know which is the fastboot folder)
3. Connect your Phone to your PC and make a new folder named "ROM" and put the aokp_ICJ422-V3.0.zip , gapps-jb-20130301-signed.zip and Super wipe script.zipin it.
4. Turn of your phone. Now hold the power button and volume down button together until the bootloader screen pops up. (White screen with 3 android figures at the bottom)
5. Now select "fastboot" using the volume up/down keys and press power button once you highlight it to get into fastboot. Now connect your phone again to your PC.
6. You will hear a sound on your pc and on the screen it will say "fastboot USB".
7. Now open fastboot folder on your PC and press shift key and simultaneously rightclick and click on "open command prompt here".
8. type the following lines:
fastboot erase cache
fastboot flash boot boot.img
fastboot erase cache
9. Now disconnect your phone and head back to "HBOOT" and then select "Recovery".
10. Now go to "install zip from sd" and select "ROM" folder which you had created earlier on the phone.
11. Now select "super wipe script" and install it. After everything is done you will come back to choose zip from sd.
12. Now again navigate to ROM folder and select "aokp_ICJ422-V3.0.zip" and install it. and then install "gapps-jb-20130301-signed.zip".
13. Now go back and select "reboot system now".
14. If you have done all the above steps correctly, you will boot into IceColdJelly Rom!
Scalliedhooligan said:
I somehow now have access to TWRP on my device... I am so confused.
Click to expand...
Click to collapse
Irrespective whether you have CWM or TWRP... Steps will be similar for flashing the ROM... Just the names of the buttons/options will be different!
If you want to use CWM, then download this : http://htcfanboys.com/download/seadersn/?action=list&file=2823
Put the recovery.img in your fastboot folder. Boot your phone in fastboot mode and fire the following lines in CMD.
fastboot erase cache
fastboot flash recovery recovery.img
fastboot erase cache
Now you can follow the steps which I have given blindly!
My phone was unlocked and rooted from a different PC so I have no fastboot folders or any knowledge on what a fastboot folder is.
Scalliedhooligan said:
My phone was unlocked and rooted from a different PC so I have no fastboot folders or any knowledge on what a fastboot folder is.
Click to expand...
Click to collapse
Download HTC Sync Manager: (this is required so that correct drivers are installed on your PC)
http://www.htc.com/www/support/software/htc-sync-manager.aspx
After download is complete, install it and restart your pc.
Download Fastboot Folder:
http://www.mediafire.com/?cm2famr3xd2cnom
Extract it somewhere on your pc.
Now look at my previous post and follow the steps...
Everything went swell until step 10. Every time I tried to install anything it came up as failed. I repeated the steps several times with the same results. I really appreciate your efforts in trying to help me.
Scalliedhooligan said:
Everything went swell until step 10. Every time I tried to install anything it came up as failed. I repeated the steps several times with the same results. I really appreciate your efforts in trying to help me.
Click to expand...
Click to collapse
What error message do you get while you flash?
what is your HBoot version?
Go to bootloader(Power button+Volume Down)... once you get to that white screen, you should be able to see your hboot version... something like hboot 1.39...

Please help with installing Legaxy Xperia 4.2.2

Install Instruction:
Set flashtool to fastboot mode.
Extract the boot.img from the ROM zip.
Place the ROM zip onto your SD card.
Flash the boot.img using fastboot.
Boot into CWM.
Select install zip, choose from SD card and select the ROM zip.
Then flash the GApps package is you put it on your SD card.
Reboot phone and you should be running CM10.1 on your phone now.
------------
Hi,
I am trying to install this rom legacy xperia 4.2.2 But I am stuck at flashing kernel
The tool is flashtool as you can see in picture
http://www.uppic.org/share-AA2F_520F170B.html
When I click select kernel to flash, it doesnt do anything and the red text says error...
Don't use flashtool, try using fastboot.exe instead.
Place the kernel in the same directory as fastboot.exe, press shift and right click on the directory and click "open command window here"
Then type they following into cmd:
fastboot devices
Confirm you see at least one device there, it will appear as a jumbled set of numbers and letters followed by the word fastboot. That will be your device.
After that, type this into cmd:
fastboot flash boot boot.img
If done correctly, it will say boot.img sent or something, it will definitely show some kind of success.
You can disconnect your phone now, boot it up and press vol down when you see a blue flash. This will bring you into CWM recovery.
From there, select install zip -> choose from SD card -> ROM zip
Flash it and reboot, you should have CM10.1 running on your phone now.
P.S this should be in Q&A section instead of general.
僕のLT18iから送られてきた
niruzz said:
Install Instruction:
Set flashtool to fastboot mode.
Extract the boot.img from the ROM zip.
Place the ROM zip onto your SD card.
Flash the boot.img using fastboot.
Boot into CWM.
Select install zip, choose from SD card and select the ROM zip.
Then flash the GApps package is you put it on your SD card.
Reboot phone and you should be running CM10.1 on your phone now.
------------
Hi,
I am trying to install this rom legacy xperia 4.2.2 But I am stuck at flashing kernel
The tool is flashtool as you can see in picture
http://www.uppic.org/share-AA2F_520F170B.html
When I click select kernel to flash, it doesnt do anything and the red text says error...
Click to expand...
Click to collapse
Connect your phone in fastboot mode first. For that, turn off your phone, connect USB cable to the PC, then hold down Menu button and connect USB cable to the phone. If blue LED lights up, phone is in fastboot mode. If not, try again.
popthosegaskets said:
Don't use flashtool, try using fastboot.exe instead.
Place the kernel in the same directory as fastboot.exe, press shift and right click on the directory and click "open command window here"
Then type they following into cmd:
fastboot devices
Confirm you see at least one device there, it will appear as a jumbled set of numbers and letters followed by the word fastboot. That will be your device.
After that, type this into cmd:
fastboot flash boot boot.img
If done correctly, it will say boot.img sent or something, it will definitely show some kind of success.
You can disconnect your phone now, boot it up and press vol down when you see a blue flash. This will bring you into CWM recovery.
From there, select install zip -> choose from SD card -> ROM zip
Flash it and reboot, you should have CM10.1 running on your phone now.
P.S this should be in Q&A section instead of general.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
What's wrong with using the fastboot within Flashtool? It is a lot easier for most of the users.
popthosegaskets said:
Don't use flashtool, try using fastboot.exe instead.
Place the kernel in the same directory as fastboot.exe, press shift and right click on the directory and click "open command window here"
Then type they following into cmd:
fastboot devices
Confirm you see at least one device there, it will appear as a jumbled set of numbers and letters followed by the word fastboot. That will be your device.
After that, type this into cmd:
fastboot flash boot boot.img
If done correctly, it will say boot.img sent or something, it will definitely show some kind of success.
You can disconnect your phone now, boot it up and press vol down when you see a blue flash. This will bring you into CWM recovery.
From there, select install zip -> choose from SD card -> ROM zip
Flash it and reboot, you should have CM10.1 running on your phone now.
P.S this should be in Q&A section instead of general.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Thanks but it doesnt work.
fastboot devices < doesnt return with anything
fastboot flash boot boot.img < it says waiting for device >
I have try many program like Sony flashtool emma, and both do not work
http://postimg.org/image/jnx079uwd/
niruzz said:
Thanks but it doesnt work.
fastboot devices < doesnt return with anything
fastboot flash boot boot.img < it says waiting for device >
I have try many program like Sony flashtool emma, and both do not work
http://postimg.org/image/jnx079uwd/
Click to expand...
Click to collapse
Have you installed adb drivers for your phone?
Sent from International Space Station
yes, http://postimg.org/image/eau58isot/
What API do I have to install?
I am on ultimate HD4 Rom
niruzz said:
yes, http://postimg.org/image/eau58isot/
What API do I have to install?
I am on ultimate HD4 Rom
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1582554 download it from here.
ChillToucH said:
http://forum.xda-developers.com/showthread.php?t=1582554 download it from here.
Click to expand...
Click to collapse
IT WORKS!!!
:victory:
popthosegaskets said:
Don't use flashtool, try using fastboot.exe instead.
Place the kernel in the same directory as fastboot.exe, press shift and right click on the directory and click "open command window here"
Then type they following into cmd:
fastboot devices
Confirm you see at least one device there, it will appear as a jumbled set of numbers and letters followed by the word fastboot. That will be your device.
After that, type this into cmd:
fastboot flash boot boot.img
If done correctly, it will say boot.img sent or something, it will definitely show some kind of success.
You can disconnect your phone now, boot it up and press vol down when you see a blue flash. This will bring you into CWM recovery.
From there, select install zip -> choose from SD card -> ROM zip
Flash it and reboot, you should have CM10.1 running on your phone now.
P.S this should be in Q&A section instead of general.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
yes flashtool doesnt work. but fastboot works.
:laugh:
delete by me
niruzz said:
yes flashtool doesnt work. but fastboot works.
:laugh:
Click to expand...
Click to collapse
Flashtool works. You just have to learn how to use it, like connecting phone in fastboot mode before selecting any fastboot options in flashtool
Sent from my Xperia Arc S using xda premium

[Q] Factory reset and flashed a new rom. I have no google apps, recovery won't load.

I have google apps in a .zip, but no way to access them. My recovery won't load. It's stuck on "checking SD card update..."
How do I fix this or have I turned my phone into a paperweight?
ashleynicholson said:
I have google apps in a .zip, but no way to access them. My recovery won't load. It's stuck on "checking SD card update..."
How do I fix this or have I turned my phone into a paperweight?
Click to expand...
Click to collapse
try other custom recovery.
robchongke said:
try other custom recovery.
Click to expand...
Click to collapse
I have no idea how to do that.
ashleynicholson said:
I have no idea how to do that.
Click to expand...
Click to collapse
are you on sense 5 already? you have to flash it via fastboot comman in CMD.
robchongke said:
are you on sense 5 already? you have to flash it via fastboot comman in CMD.
Click to expand...
Click to collapse
I've been running CM for several months, I've never had Sense 5. I installed the new CM Nightly, and it wouldn't boot, so I had to factory reset my phone and flash an old version of CM. It booted, but the Gapps didn't install. Now when I go back into my recovery (Clockwork), it won't load properly.
ashleynicholson said:
I've been running CM for several months, I've never had Sense 5. I installed the new CM Nightly, and it wouldn't boot, so I had to factory reset my phone and flash an old version of CM. It booted, but the Gapps didn't install. Now when I go back into my recovery (Clockwork), it won't load properly.
Click to expand...
Click to collapse
download any custom recovery here. http://forum.xda-developers.com/showthread.php?t=1832891
put the recovery in your fastboot folder
rename it to recovery.img
enter this command one at a time
fastboot flash recovery recovery.img
fastboot erase cache
then reboot your phone to recovery
robchongke said:
download any custom recovery here. http://forum.xda-developers.com/showthread.php?t=1832891
put the recovery in your fastboot folder
rename it to recovery.img
enter this command one at a time
fastboot flash recovery recovery.img
fastboot erase cache
then reboot your phone to recovery
Click to expand...
Click to collapse
Is that the windows version?
ashleynicholson said:
Is that the windows version?
Click to expand...
Click to collapse
yes. I'm using windows 7
robchongke said:
yes. I'm using windows 7
Click to expand...
Click to collapse
Ok. Does it matter that I'm using a different computer than the one I used originally?
How exactly do I do this, does my phone need to be on or off or what's the story?
Thanks very much.
ashleynicholson said:
Ok. Does it matter that I'm using a different computer than the one I used originally?
How exactly do I do this, does my phone need to be on or off or what's the story?
Thanks very much.
Click to expand...
Click to collapse
phone must be in bootloader and you need fastboot files. how come your phone is on CM10 yet you don't know this fastboot thing?
robchongke said:
phone must be in bootloader and you need fastboot files. how come your phone is on CM10 yet you don't know this fastboot thing?
Click to expand...
Click to collapse
I had great trouble doing it the last time. It took me several hours and I came close to bricking it a few times. I'm pretty technologically incapable. It's my bootloader thing that won't load anyway, so that's no use to me.
Is there any chance you could be a saint and compile together detailed instructions for me? If not, no worries, but I'm a bit of an idiot.
ashleynicholson said:
I had great trouble doing it the last time. It took me several hours and I came close to bricking it a few times. I'm pretty technologically incapable. It's my bootloader thing that won't load anyway, so that's no use to me.
Is there any chance you could be a saint and compile together detailed instructions for me? If not, no worries, but I'm a bit of an idiot.
Click to expand...
Click to collapse
if you dont have htc driver installed in your computer just download and install htc sync manager.
i only use fastboot. here is the file. http://www.mediafire.com/download/q2540u4g3v6qqd7/Fastboot.zip
extract the fastboot zip file and put it in your desktop.
put your downloaded custom recovery inside the fastboot folder. rename it to recovery.img
boot your phone into bootloader press power button+volume down. dont release until you see this.
https://www.google.com.ph/search?q=bootloader+htc+one+x&client=firefox-a&hs=UrW&rls=org.mozilla:en-USfficial&source=lnms&tbm=isch&sa=X&ei=JGZcUuDFEsaoiAf6rYCABA&ved=0CAkQ_AUoAQ&biw=1262&bih=645#facrc=_&imgdii=_&imgrc=OCSTXEIwH8T3jM%3A%3BHGXrRqPSLDR5xM%3Bhttp%253A%252F%252Fcdn2.ubergizmo.com%252Fwp-content%252Fuploads%252F2012%252F05%252Fone-x-boot.jpg%3Bhttp%253A%252F%252Fwww.ubergizmo.com%252F2012%252F05%252Fatt-htc-one-x-bootloader-unofficially-unlocked%252F%3B640%3B459
now in your pc navigate to start>run then type cmd
one you're in command prompt. navigate to where your fastboot folder is. like this C:\Users\ashleynicholson\desktop\fastboot>
you can now enter these two commands. one at a time
fastboot flash recovery recovery.img
fastboot erase cache
you now have custom recovery. reboot your phone.
robchongke said:
if you dont have htc driver installed in your computer just download and install htc sync manager.
i only use fastboot. here is the file. http://www.mediafire.com/download/q2540u4g3v6qqd7/Fastboot.zip
extract the fastboot zip file and put it in your desktop.
put your downloaded custom recovery inside the fastboot folder. rename it to recovery.img
boot your phone into bootloader press power button+volume down. dont release until you see this.
https://www.google.com.ph/search?q=...x-bootloader-unofficially-unlocked%2F;640;459
now in your pc navigate to start>run then type cmd
one you're in command prompt. navigate to where your fastboot folder is. like this C:\Users\ashleynicholson\desktop\fastboot>
you can now enter these two commands. one at a time
fastboot flash recovery recovery.img
fastboot erase cache
you now have custom recovery. reboot your phone.
Click to expand...
Click to collapse
If you hold shift and right click in side the fastboot folder, it will open a cmd window in that location.
To navigate in cmd you use the CD command
E.g
CD C:\\ will take you to the root of C drive.
CD C:\\fastboot will take you to the folder "fastboot" and so on.
Sent from my HTC One X using xda app-developers app
Ok, I've figured out what I was doing wrong. I had my phone plugged into the USB while trying to load the bootloader, and of course that wouldn't work. All is well now, thanks very much.
Sent from my HTC One X using xda app-developers app

Categories

Resources