Develop Bugs

[Q] cm9 overclock problem !

i flashed cm9 modified by liumiao . i have read that it overclocks the processor speed to 806mhz . but its still showing only 600mhz for me ? any solution ?

The default setting is for 600Mhz.You have to change it yourself .Goto Settings>performance>Processor>Change the Maximum cpu frequency.Hope that helped

hassan89 said:
The default setting is for 600Mhz.You have to change it yourself .Goto Settings>performance>Processor>Change the Maximum cpu frequency.Hope that helped
Click to expand...
Click to collapse
Be careful about overclocking though, not every cpu comes out the factory alike. Some can handle overclocking better than others, if you experience any force closing of apps you should try lowering the max cpu figure. And while overclocking will give you a smoother UI experience, you may notice a reduced battery life. Good luck.

thanks mates it has helped me

[Q] Max CPU speed ???

Hi there,
Does anyone know what is max CPU speed on HTC Desire(bravo) GSM ??? But it has to be stable and realiable speed,with good performance. I am using No-Frills CPU software to set my CPU speed,and my max speed that I can set is 1.267,also it can be chosen slower speed.
So is software right,can I set it to max(or lower then max) speed and it wont brick or anything ???
I use Supernova XTREME ROM if that tells anything.
Thanks for answers,
Cubbe

mine is always set to 998 max (usually thats default) never needed to change it. soo if it aint broke dont fix it comes to mind
Sent from my HTC Desire

No fixed answer. Every hardware is unique. Try some settings and see what works for you.
via xda app

[Q] Strange undervolting results

I've been using System Tuner Pro for undervolting on the most often used frequencies and I got those result:
19MHz (is this 'deep sleep'?) 800mV
768-800mV
998-800
1070-975
1150-1150
The problem is, that if I set the voltage under the stock 925mV for 384, 245 or 128mV, the phone crashes almost instantly. How is it possible that higher freqs like 998MHz run just fine on 800MHz but those much lower ones wont?

If your phone crash on low voltages you need to increase them

No sh!t, Sherlock.
Talking about irrelevant responses...

[Q] Governors behave badly when low speed at 245

Hi folks,
I am getting some issues when i have the governor set to interactive and the low speed set to 245 on my G2 andromadus JB 4.2.2
kernel 3.0.068-gb57022d-dirty
it appears to be that at some point in the phone operation it will seem to get stuck at the 245 speed making the phone usage unbearably slow.
When i set the governor to performance it runs pretty smooth.
it will run smooth in interactive/ondemand with low set to 245 for a while after boot but eventually the performance will start to decay if left in interactive.
any ideas on what to do here. how to find the actual issue or resolve the symptom?
if i bump the low speed to 786 it runs ok but sucks down battery a bit fast.

Jb isn't too stable for our device..that's y it lag..also Ur clock speed is far too low..u can run 245 on GB..as GB is much more stable than jb for our device. Performance governor is smooth as the phone run at max speed full time,doest need time to scan for the frequency to bump up.
Sent from my Desire Z using xda app-developers app

yeah thats likely. still it does seem to something to do with google now or location services in general.

[Q] ARHD with XM Kernel 1.3ghz default?

Hi i have ARHD on my phone with the XM Kernel. I was slightly suprised in the Trickster MOD app, the max clock speed is 1.3ghz. Yes i know i can OC to 1.5 but im not sure what is setting this. When i had ARHD installed with stock kernel it was showing 1.3 as default. I assume that was set by the ROM. But i installed this kernel and still has 1.3 as the default.
Also the default govenor settings for the gaming one has the boost_freq set at 1300000, which is 1.3ghz, that can be changed to 1.5 also. But surely the boost freq would be the max freq no matter if you move the slider to 1.5 in the basic controls? But i would be suprised that the gaming govenor would underclock the cpu, surely for gaming you would want the phone maxed out?
Is this expected with the XM Kernel and the ARHD? And if so, is there any things i can change in the govenor settings to make sure it performs at absolute max?

It's kernel related; Xmisters' kernels since 188 have a hard cap(1.3Ghz) by default, but using trickster mod, or another o/c apk, you can raise it to the stock 1.5Ghz(tick 'set on boot' to ensure it stays at 1.5) The best settings are trial and error, tbh, I use touchdemand/sio though smartmax seems to be the best balance.

Thanks for the answer. i can change it to 1.5 easy enough, but if you look in the govenor control, the boost_freq is is set to 1300000. If i left it at that, would it prevent the cpu from going up to 1.5?

Danw20 said:
Thanks for the answer. i can change it to 1.5 easy enough, but if you look in the govenor control, the boost_freq is is set to 1300000. If i left it at that, would it prevent the cpu from going up to 1.5?
Click to expand...
Click to collapse
you have sleep (lowest CPU can go), ideal freq(the speed the CPU aims for while awake), touch poke (when you touch the screen), boost (what it boosts too to prevent lag) and max (CPU flat out)
Setting the boost to 1.3 will still allow the could to run at full speed.
Sent from my HTC One X using xda app-developers app

That makes sense, cheers. So its probably a good idea to leave it as it is then.