[Q] Xperia Play display bug - Xperia Play Q&A, Help & Troubleshooting

Hello there.
I bough my second hand Xperia Play few months ago and it was fine. I rooted it, but kept stock ROM, as I found out my device have forbidden access to bootloader (and it cannot be done, or at least that's how I understood it - nevermind it now).
It was fine, until let's say 3 weeks ago. My phone started to graphically glitch in a very weird way. It grew worse and worse and now I cannot use it anymore ... unless it "wants" to, because sometimes the phone works perfectly normally.
I captured the problem with my second phone ... it's not so high quality, but please try to imagine the weird colours and shapes you see on the screen, only that in reality, they are extra sharp. It looks like colourful grains of sand
youtube.com/watch?v=S1qkkiuEU8M&feature=youtu.be
I suppose something has happened with graphic chip in the device and while this has happened before (to my w550i), this case is a bit different. It works sometimes. I push OFF button and it shows grain. I push it again and grain is there again. But sometimes it normally shows me unlocking slider, I unlock it and it's OK. Sometimes it stucks during unlocking and while the phone works, display shows last working state, for example unlocking slider in the middle of sliding.
I've tried to search for such topic, if it happened before, but wasn't able to come with good search terms to start with : /
I also tried to restart the phone many times, to no avail (grain display is simply during startup too), or even install ROM again through SE updater ... nothing. That was my last choice, now I'm clueless.
Anyone who knows about this issue, from different mobile phone (it doesn't matter), or if it can be repaired by me, or in shop for money (that wouldn't cost more than new phone) or simply any hint you can give me ? I'll be glad, will appreciate it.
EDIT: I added photo too:
i48.tinypic.com/2z71ypy.jpg
Again - it looks like that, only much sharper.

Martyrius said:
Hello there.
I bough my second hand Xperia Play few months ago and it was fine. I rooted it, but kept stock ROM, as I found out my device have forbidden access to bootloader (and it cannot be done, or at least that's how I understood it - nevermind it now).
It was fine, until let's say 3 weeks ago. My phone started to graphically glitch in a very weird way. It grew worse and worse and now I cannot use it anymore ... unless it "wants" to, because sometimes the phone works perfectly normally.
I captured the problem with my second phone ... it's not so high quality, but please try to imagine the weird colours and shapes you see on the screen, only that in reality, they are extra sharp. It looks like colourful grains of sand
youtube.com/watch?v=S1qkkiuEU8M&feature=youtu.be
I suppose something has happened with graphic chip in the device and while this has happened before (to my w550i), this case is a bit different. It works sometimes. I push OFF button and it shows grain. I push it again and grain is there again. But sometimes it normally shows me unlocking slider, I unlock it and it's OK. Sometimes it stucks during unlocking and while the phone works, display shows last working state, for example unlocking slider in the middle of sliding.
I've tried to search for such topic, if it happened before, but wasn't able to come with good search terms to start with : /
I also tried to restart the phone many times, to no avail (grain display is simply during startup too), or even install ROM again through SE updater ... nothing. That was my last choice, now I'm clueless.
Anyone who knows about this issue, from different mobile phone (it doesn't matter), or if it can be repaired by me, or in shop for money (that wouldn't cost more than new phone) or simply any hint you can give me ? I'll be glad, will appreciate it.
EDIT: I added photo too:
i48.tinypic.com/2z71ypy.jpg
Again - it looks like that, only much sharper.
Click to expand...
Click to collapse
Imo that should be the flex cable problem, the cable which connects the motherboard and the screen, is damaged. Unroot, send to Sony centre, or maybe you can purchase it from eBay and fix it yourself.
Sent from my awesome Xperia Play with DoomKernel

Thanks man a lot, because you gave me what I needed (second to) most - search terms through which I can find more.
I knew that there has to be cables connecting display with main body somewhere, such as there are similar cables in hinges between notebook display and main body ... but I supposed they would be well crafted, because the mobile is suppose to be sliding between these two states quite often.
I also saw this, to which your another post helped me to go:
http://forum.xda-developers.com/showthread.php?t=1646537
I will now try to learn how to take the phone apart (some are easy, some are hard to do so) and hope for the best. The good thing is that display is probably OK. Display usually costs a lot, right ?
So if I won't be able to take it apart by myself and will be forced to go to repair shop, I will have KNOWLEDGE ( ) and won't be fooled by greedy repairmen, who would want to tax me new display or something apart of cable-replacing/connecting.

Good luck to you mate. All the best.
Sent from my awesome Xperia Play with DoomKernel

OK, news update - so far, nothing real has happened. I contacted one friend whose father repairs stuff, maybe it will help. I also bought set of T4 screwdriver heads so I can remove those buggers on the phone (and if that father-repairman plan fails I'll just do it myself). I also contacted guy from whom I bought the phone (because it's only 3 months old), maybe he will feel a bit guilty (it's actually a shop, not just person) and help me to repair it for bargain price.
We'll see.
And just one question for you, or anyone else who ever did this. How often it is needed to replace flex cable ? Or in other words - how often just connecting it again is enough ? Because buying form ebay isn't option for me (no credit card, no paypal, or whatever is needed - and I live in Central Europe). Not sure if such specialized parts are freely available to buy in electronic shops. After all, Xperia Play isn't so widely spread android phone and to add to improbability - flex cable replacement isn't usual problem too. Or is it ?
Just food for thoughts.

Related

Artemis white screen + screen shaking problem

hi all gurus,
my artemis recently got a white screen of death..
symptom
- the whole screen slowly becomes white
- will happens especially in hot (outdoor, noon time, or when loading big programs)
- the phone itself is noticeable hotter than normal when white screen happens...
- need to unplug the battery in order to restart.. soft-reset wont work when screen goes white..
- at early stage, still can connect to pc and flash new ROM, but now, cannot connect to pc already (pc just wont recognize it)
- the screen is seems to be shaking left to right all the time (a noticeable extra 5 pixels appears on the left most border of the screen, and the goes disappear, repeatingly)
- have already replaced a stable and clean ROM at the stage were the ppc still can connect to pc (i use the ROM before for few months, no problem)
- have try to switch on with a new battery, problem remains..
- battery drains quickly...
does anyone face this kind of problem before? it is hardware problem right? i search on the time, some says is the CPU need resoldering, some says need to replace the LCD ribbons... but the unfortunately things is, no pda repair expert near by area...
any feedback is apperciated. Sorry if my english grammer is not so good.
thanks.
i have the same problem...
i have bought a new battery and it still happens.
I now only get the following on boot:
IPL: 3.04.0001
SPL:1.11.0000
GSM: 03.08.90
I don't get the fourth one and it no longer loads - does this mean that the os is fluffed..?
Had the same problem, hard reset solved it
I have like this proble in my p3300
anyone can help us ??
oman_jeep said:
I have like this proble in my p3300
anyone can help us ??
Click to expand...
Click to collapse
Hi...
I had the same prob. as in first post here...with my aretemis.Tried to fix it (after i ve read sh... load of threads) by heating up board and CPU (I was pissed so I just wanted to destroy it) and I managed to do so.
Now I get only red led when it is con.to PC.
After that I found post of some guy from ROMANIA who claims that he managed to fix it by one of these:
1. reheating CPU
2. changing CPY clock crystal
3.(I can't recall third thing, but it was hardware too)
After that I went on eBay, got a better one and now I'm happy with my new artemis,plus I have spare screen battery etc..in case I damage it somehow...
Ah yes...before I tried to f...(fix) it, I found that my warranty is expired for 1 month....so you can imagine why i lost my patience.
i know this will bring you down,sorry,but I had the same symptoms...
now I'm changing custom roms to see which one fits me, and still i get amazed with this beautiful phone....
cheers,
Z
Looks like a general problem with no fixes/solutions to be found anywhere.
My solution:
Get rid of this HTC sh!t and roll back to Motorola...
Found a solution!
Still being under manufacturers warranty, I took it to the repairs agents, they replaced the motherboard and voila!
Never blame a WSOD on software...

Serious problem with my Galaxy S Screen!!!

Hi to all,
A couple of days ago I noticed that when I answered a call the colors of the screen looked bad, and I didn't pay attention to it.
Now my screen has transparent horizontal lines which are pretty visible, kind of like interference you get in computer screens when you take a picture of them.
I would like to mention that I haven't dropped the phone even once.
I'm considering doing a factory resest in hopes that it will solve the problem, but I doubt that it is a software issue.
What do you guys think?
Please advise
Itay
Sounds like a broken screen to me. And definitely like a warrenty case. Restore stock f/w if you have flashed and return it.
Restore the original firmware (if you have flashed the phone) and call the samsung service for the assistance.
the thing is that now I don't see it at all.
It's as if it came and gone.
I disabled my task killer and juice defender, performed a complete titanium backup, in case I want to restore afterwards, and now everything is normal.
It does sound like a hardware issue, but do you think there's a chance it is software related?
I'm asking because I purchased it in europe, and I don't live there, so sending it for repair is something I would rather avoid.
Of course, if it is indeed 100% hardare issue, I have no choice.
That is why I'm asking, to be certain and to see if there are others who experienced this issue.
Your replies are much appreciated
update:
It appeared again -> Did a Factory Reset -> It's still there -> Sending for repair.
Must be a hardware issue.
Thank you for your replies.
I've actually always had slight screen issues with my Galaxy S also. The screen flickers slightly once in a while. I don't know if the radio is actually the cause but it's the kind of thing you might expect from radio interference.
Has anybody else noticed this?
Benjamin Dobell said:
Has anybody else noticed this?
Click to expand...
Click to collapse
Nope, never seen any flicker. My screen seems to have a defect of it's own though, but I'm not sure if it's worth the effort to send it in, because I imported mine from the UK while I live in South Africa.
When in the sun or under bright light I can see a two vertical lines near the sides and a horizontal line on dark/black colours and when the screen is off. As if those pixels have a grey/brown tint to them. The line is mostly one pixel thick but in places it is two pixels.
They are almost impossible to see unless under sunlight where they are clearly visible where the screen is black.
Does anyone else see this or know anything about it?
Edit: Apparently it's just the motherboard or something visible through the screen and they all have it, so I'm worrying about nothing...
That's interesting...
It used to come and go, but I think now it's here to stay.
It's really annoying and the screen, while usable, is really not a pleasant sight to look at.
I've attached some photos showing the problem.
With a normal screen I would say that it looks that way because that's what you see when you photograph a screen of an electronic device, but the sad thing is that what you see in the picture is exactly what I'm seeing now.
I did a factory reset, so it's in german now.
I heard some Droid X had a similar problem, but didn't know Galaxy S was having it as well.
In any event, can you confirm that after a factory reset, I no longer have root access?
Just making sure so that they don't give me problems with the warranty.
seem like the phone was dropped, and the screen got damaged
the connectors are lose
double posted again....
Really?
That's very weird...
The only time it was "dropped" was from half a meter , it didn't fall directly but partially sideways, it was with a case, and it landed on its back, not on the screen.
I wouldn't even call that a fall.
Unless, someone in my family dropped it without telling me...
Either way, I think there's no escape but to send it to repair.
If you think it's a problem with the connectors, would you try and give it to some local lab to try and fix it or send it to samsung for replacement?
I faced similar problem.
This problem only occurs when I use the phone in 2g mode.
there are occasions whereby the signal bar for 2g is full and when I place the phone near some conductive surfaces the lines becomes very obvious, to the point of irritating.
nit sure if anyone has such problems too
I have same problems with horizontal lines.
I never paid attention if i am on 2g or 3g when it happens. I will now.
Edit: rooted on jm5
-------------
It seems that my phone too has started to do the same thing since last night.
I have called Samsung and am waiting to hear from them now.
I hope this is a thing covered in the warranty.
I have reverted to the local ROM for India and have deleted everything on my device.
Yet it shows lines flickering like you can see on old computer monitors.
Its not as bad as the ones on the attachment above but it is starting to annoy me.
It usually happens when the screen is completely filled with a single color except black.
Eg. When you pull down the notification tray down.
Also I seem to notice that when the wifi is off, it stops.(I dunno maybe a placebo effect)
aditya_t90 ,
I have sent it to Samsung for repair, and they should tell me in the coming days exactly what the problem is and whether it can be fixed under warranty or not.
I will update as soon as I hear from them.
Until then, try to see if it changes when you hold the phone differently, for example if you grip it more firmly or hold it in another way.
itaykoren said:
aditya_t90 ,
I have sent it to Samsung for repair, and they should tell me in the coming days exactly what the problem is and whether it can be fixed under warranty or not.
I will update as soon as I hear from them.
Until then, try to see if it changes when you hold the phone differently, for example if you grip it more firmly or hold it in another way.
Click to expand...
Click to collapse
When did you send it in and when did they receive it(if you were not there when they got it).
Also how long has it been without your phone?
The samsung service center is shut in my area today.
I will go to them tomorrow and get this sorted out.
Its not like the phone was cheap or anything.
I actually sent it to my uncle in Germany because it was purchased there.
He went to the store where he bought it and the store owner immediately sent it to samsung and said that probably by this Tuesday or Wednesday (so tomorrow or in 2 days) he will get an answer from them and see what's going on.
aditya_90 ,
Just to let you know that Samsung are sending me a new phone to replace the damaged one.
I sent in my phone for repairs and they replaced the LCD module. The problem is now gone.
I suggest that you should do the same while the warranty still holds since it appears to be the LCD that failed somewhat.

[Q] [Panic] Ditigitizer problem or Motherboard?

This is my problem:
In may, I bought a Xperia Play on second-hand web from a guy on my city. In time, the phone got wet by rain, and digitizer started to go sometimes crazy, specially texting. I could survive with it.
After 2 months, the Ribbon Flex crashed, it showed screen completely screwed up, like in TV, you know, that problem that happen to everyone after sometime . So I changed it.
The point its, when i changed it, my old Digitizer stopped working ok, it gave too much problems. For 2 minutes it worked normally, except the base of the screen (that zone of the screen didnt detect my fingers, dont know why). Then, it wouldnt work totally, till, in some moments I took the phone, it would work for only minutes. I controlled the phone with the pad, but when it went out of battery by accident, I wasnt able to unlock again, as I couldnt touch and unlock the Pin code so I can use the phone again with the pad.
So I buyed a new one, which of course, I dont know why it doesnt work too (this replacement comes from a trusted dealer from my uncle electronics shop, so for the moment, I dont think the new digitizer itself its the problem).
What the hell Im supossed to do man? Im starting to go panic, because I dont know if the Motherboard have something to do with all this, and that means Phone dead right? Ive seem a lot of posts, all I could google with the same problem, and there is a lot of different cases and solutions with the damned Xperia Play, all starting with the damn unresponsive digitizer.
I saw the guide above amd i already posted there, but I wanted to leave a thread. Please, I need your help if its posible. Thank you at least for reading this.
Try replacing your flex cable again. Something like this happened to be, but the digitizer was completely unresponsive. After I replaced it, it works fine.

[Q] Captivate Glide: Screen 'redding out', not that old.

Too late to return of course, and the seller on Ebay (bought it new) is retired.
I've had the phone about 4 months now, and like the phone a lot, its fine. Except now suddenly the screen is starting to get a reddish/purplish smeary "hue" around all the icons. This comes and goes.
I've found if I slide the keyboard out briskly and snap it back, the screen will usually (but not always) right itself. But I'm sure that's not going to keep working for long.
The suggestion is a loose video cable or wire somewhere inside. I've found the video below which gives the steps of taking the phone apart for a 'screen repair', but its about as long as an open heart surgery procedure and I don't look forward to risking taking the phone apart any more than I need to.
However.... loose wire? Has anybody seen this, and is there any suggestion for a fix? I have much customization on the phone, and my worst fear is the display will suddenly short out leaving me bricked at a complete loss.
Also, there is a second problem which I have suddenly noticed- the phone will not dial. I tap on a contact and it says "Dialing...", but takes forever for it to begin, or never does (forcing it to reboot). I'm not sure if this is related or not but thought I'd mention.
Thanks much for any suggestions!!

[Q] Xperia Play Screen Issue

Hi
I am trying to get my old Xperia Play working again. I had no issues during the two years when it was my main phone, but I since have got the HTC One, and let the wife use the Xperia as her second phone. As far as i can tell, the rings on her fingers have damaged the screen. It does not respond to about 90% of commands, but there are some areas on the screen that still work. Typing is a nightmare, you have to turn the phone 90 and 180 degrees for certain letters to work, and some don't work at all...
I am pretty sure that a new screen would fix it, but somebody I work with said that even a new screen would not fix this issue as it's an old phone that relies on pressure on the screen to work.
Please can anyone advise what parts I would need to repair it. I am happy to do it myself, but don't know if it's a lost cause?
Any help would be much appreciated!
Xperia play screen is not pressure based. I don't like this kind of people that think they know best. I actually think that you actually can replace a pressure based (capacitive I think?) screen btw.
Anyway, all you need to replace is most probably just a digitizer. It's not that expensive and the repair is not that hard to do.
Here's a replacement guide that I used mainly because it's high resolution and you can actually see which screw originally was, that's really helpful.
https://www.google.pl/url?sa=t&sour...YbGu3YV4G_0d32Jmw&sig2=zfJiuxMUKufhSRmectIvHA
Thanks friend, I will give this a go!
Do you think this will be ok?
EBay item number 290930665920

Categories

Resources