Develop Bugs

[Q] synicate frozen 1.2

so i just rooted my epic using this version.. [MOD][One Click Root]ClockworkMod version 3.1.0.1[RFS & EXT4] and i wasnted to flash the frozen rom 1.2 but for some reason it is telling me to re run that if i have the purple cwm should i be good to go, do all i have to do to flash that is boot into clockwork mod wipe data cache dalvic cache and flash rom and reboot oh and does it come with a kernal or do i have to find a specific kernal with that rom or does someone have a kernal they can suggest... ?? thanks in advance..

bfitzpatrickd2d said:
so i just rooted my epic using this version.. [MOD][One Click Root]ClockworkMod version 3.1.0.1[RFS & EXT4] and i wasnted to flash the frozen rom 1.2 but for some reason it is telling me to re run that if i have the purple cwm should i be good to go, do all i have to do to flash that is boot into clockwork mod wipe data cache dalvic cache and flash rom and reboot oh and does it come with a kernal or do i have to find a specific kernal with that rom or does someone have a kernal they can suggest... ?? thanks in advance..
Click to expand...
Click to collapse
No kernel, you need to grab one. I suggest Genocide 2.0. You can flash them back to back.
Also FYI, there is a Q and A section for questions. some internet police wanna be mods may get upset. Also kernel is with an e...

Si I can just flash this rom via purple cwm with no issues as stated above sorry ill sure it will be moved shortly
Sent from my SPH-D700 using xda premium

bfitzpatrickd2d said:
Si I can just flash this rom via purple cwm with no issues as stated above sorry ill sure it will be moved shortly
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Yeah, the purple CWM. Wipe data, cashe, and dalvik 3 times each, install zip from sd card, kernel, install zip, rom, reboot.
That will get you there.

Thank you...
Sent from my SPH-D700 using xda premium

WOOOT! Fellow Packers Fan!!
couldnt resist.

[Q] Interference with mods?

Hello, as of now i am on the CDMA CM9 nightly ROMs. I have recently installed a mod that tweaks the notification bar, which can be found here. Since i have installed it do i have to do anything different when flashing the latest nightly? correct me if im wrong.
1. Make a nandroid backup
2. install zip from sd (do i need to wipe?)
3. chose the latest nightly
and after i install the latest nightly will i have to reflash my kernel and mod i previously installed?
Thanks in advance!

If you are installing a nightly on top of CM9 you should wipe both cache and dalvik cache before flashing.
And yes, you will have to re-flash any mods or kernels as well.

El Daddy said:
If you are installing a nightly on top of CM9 you should wipe both cache and dalvik cache before flashing.
And yes, you will have to re-flash any mods or kernels as well.
Click to expand...
Click to collapse
So if I flash a nightly on another nightly I have to wipe both the dalvik and normal cache? But I don't have to clear all user data, right?
Sent from my Galaxy Nexus using XDA App

No need to wipe data. You may need to flash gapps again after the rom flash though.
Sent from my Xoom using XDA Premium HD app

If I boot up without gaps I can always flash it by going back into clockwork right?
Sent from my Galaxy Nexus using XDA App

[Q] CM7 stuck on FreeXperia logo

Don't understand why..
I flashed the boot.img included in the zip via fastboot
then i went into recovery and installed FXPCM7
rebooted
Stuck on FreeXperia logo for 30mins.
Whats going on?

After you flash the kernel boot into recovery...
wipe data/factory reset
wipe cache
then go into advanced then wipe dalvik cache
Then flash the CM7.zip
Let me know how it goes - good luck

- wipe data/factory reset
- wipe cache partition
- advance > dalvik cache
install FXPCM7

tried it, still stuck on FreeXperia logo
do i need to be on stock when installing it?
I am currently on the enhanced v2 firmware with doom kernel..
update:
tried stock too, doesnt work..

Hm try this
Redownload CM7
using flash tool flash this FTF - It has the newest baseband and largest user partiton
flash the kernel that came with CM7
Enter recovery and..
> factory reset
> wipe cache partiton
go into advanced and
>clear dalvik cache
Then install the CM7 zip from sd-card let me know how it goes

Thanks, but that was the firmware i was on.
I tried that method twice but the same thing kept happening to me
stuck at FreeXperia logo

Just to check if the problem is specific only to CM7 rom itself try installing another rom like Gin2Jellybean - Good luck

I have used various ROMS (all working perfectly) such as:
Gin2ICS/JellyBean
xDarkICS 4.0.3
Xperia NXT
JokaWild
Advanced Stock
So I think it may be just a problem with CM7?

Oh that's strange, try to download it again or try another build from here

tried the stable build now.. same problem :/
EDIT:
Tried flashing doom kernal, this time it actually boots.. touch screen doesnt work but it boots..
Is there another kernal i can use that works?

help please? would love to get cm7

Gamepad doesn't work on CM7. Flashing the ICS fixes kinda works
Sent from my R800i using xda premium

CTU_Loscombe said:
Gamepad doesn't work on CM7. Flashing the ICS fixes kinda works
Sent from my R800i using xda premium
Click to expand...
Click to collapse
lol?
Sent from my Xperia Play

AudioCreaper said:
lol?
Sent from my Xperia Play
Click to expand...
Click to collapse
Why lol?
I couldn't get the pad to work so I flashed the ICS Circle fix and the CM9 gamepad one and it worked. For emulators anyway
If theres a proper fix please let me know
Sent from my R800i using xda premium

I finally figured out how to do it. Go in CWM and delete user data, dalvik cache, cache, and then go to the Mounts and Storage menu, and Format the System Partition. Make sure not to clear the SD partition on accident. Anyways, this is the only way I could get it to work
Sent from my R800x using xda app-developers app

Phascinate said:
I finally figured out how to do it. Go in CWM and delete user data, dalvik cache, cache, and then go to the Mounts and Storage menu, and Format the System Partition. Make sure not to clear the SD partition on accident. Anyways, this is the only way I could get it to work
Sent from my R800x using xda app-developers app
Click to expand...
Click to collapse
didnt work for me >_<

CTU_Loscombe said:
Why lol?
I couldn't get the pad to work so I flashed the ICS Circle fix and the CM9 gamepad one and it worked. For emulators anyway
If theres a proper fix please let me know
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Isnt the topic of this thread helping the op to get cm7 working on his phone? And you're talking about the circle button.
Sent from my Xperia Play

How to flash a new ROM

Hey guys, I just bought my Galaxy S III, I'm coming from the S II.
On the S II, there would be an installation process that I remembered by heart after flashing several times:
Open CWM
Backup
Install Darkside SuperWipe
Flash ROM
Flash gapps
Install Darkside Cachewipe
Reboot
Wait 10 min
Reboot.
While I've been on the S III forums for the past 2 days I haven't seen any of the devs have an installation guide, I figured I might have to wipe dalvik, wipe data or something but haven't tried just yet. Maybe I could just flash ROM over it.
If there's a process can someone please tell me.
Thank you, greatly appreciated.
Sent from my SGH-T999 using xda premium

Backup
Wipe cache
Wipe dalvik
Wipe data/factory reset
Install ROM
Wipe cache
Wipe dalvik
Reboot (unless u need a kernel then see below)
Some ROMs require to flash kernel in that case after the last dalvik wipe flash kernel then wipe cache and dalvik.
P.s. u posted in the wrong section and u will here it from more than me this should be In Q &A hope that helps ya tho....
Sent from my SGH-T999 using xda premium

real_khali said:
Hey guys, I just bought my Galaxy S III, I'm coming from the S II.
On the S II, there would be an installation process that I remembered by heart after flashing several times:
Open CWM
Backup
Install Darkside SuperWipe
Flash ROM
Flash gapps
Install Darkside Cachewipe
Reboot
Wait 10 min
Reboot.
While I've been on the S III forums for the past 2 days I haven't seen any of the devs have an installation guide, I figured I might have to wipe dalvik, wipe data or something but haven't tried just yet. Maybe I could just flash ROM over it.
If there's a process can someone please tell me.
Thank you, greatly appreciated.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Superwipe , wipe cache and cache/dalvik install ROM and then gapps if your installing a jb 4.1.1 ROM then I would wipe everything again and then fix permissions and reboot, wait 10 min and reboot again
Please correct me if I missed a step
Sent from my SGH-T999 using xda app-developers app

shehade08 said:
Superwipe , wipe cache and cache/dalvik install ROM and then gapps if your installing a jb 4.1.1 ROM then I would wipe everything again and then fix permissions and reboot, wait 10 min and reboot again
Please correct me if I missed a step
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
So does SuperWipe work for every phone?
My .zip file for SuperWipe says SGH-T989_Darkside_superwipe.zip

I would not use the super wipe script from The s2 I believe there is one floating around for ours but I do not use it ... I also recommend u use twrp recovery instead of clockworkmod
Sent from my SGH-T999 using xda premium

mikeb85 said:
I would not use the super wipe script from The s2 I believe there is one floating around for ours but I do not use it ... I also recommend u use twrp recovery instead of clockworkmod
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
This is what I did 2 days ago to install AOKP JB Build 3 and its been working like a charm
Reboot recovery
Wipe data factory reset
Wipe cache
Wipe dalvik cache
Flash rom
Let the phone sit for 5 mins then reboot
Haven't had any SOD or RR, should I stick to what I did?

real_khali said:
This is what I did 2 days ago to install AOKP JB Build 3 and its been working like a charm
Reboot recovery
Wipe data factory reset
Wipe cache
Wipe dalvik cache
Flash rom
Let the phone sit for 5 mins then reboot
Haven't had any SOD or RR, should I stick to what I did?
Click to expand...
Click to collapse
U also need gapps for aokp,cm10,paranoid,hellfire, and cna... u do not need gapps for touch wiz jellybean leaks.
Sent from my SGH-T999 using xda premium

mikeb85 said:
U also need gapps for aokp,cm10,paranoid,hellfire, and cna... u do not need gapps for touch wiz jellybean leaks.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
yeah my bad...i also flashed gapps..i forgot to put that in there..
So, should I just stick to what I did previously?

I depends what u are looking for in a ROM..... if u like stock aosp then aokp is probably the most stable but there are tons of features on touchwiz ROMs that have me going back and forth... so its all preference really if u like stock jellybean
Then u are good where u are
Sent from my SGH-T999 using xda premium

mikeb85 said:
I depends what u are looking for in a ROM..... if u like stock aosp then aokp is probably the most stable but there are tons of features on touchwiz ROMs that have me going back and forth... so its all preference really if u like stock jellybean
Then u are good where u are
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
yeah, i like where i stand with the AOKP builds, it always has me going back to it . thanks for the help

edit: just noticed several people have replied already.
But in case you missed this:
Don't post in this section if you're not a developer. Use the Q&A subforum instead.

stir fry a lot said:
edit: just noticed several people have replied already.
But in case you missed this:
Don't post in this section if you're not a developer. Use the Q&A subforum instead.
Click to expand...
Click to collapse
Couldn't have put it any better.
Sent from my SGH-T999 using Tapatalk 2

Thread cleaned
Flaming will not be tolerated
FNM

Superwipe for our device:
http://dl.dropbox.com/u/34055339/XquiziT_SuperWipe_SGH_T999.zip

well typically any ROM that i flash i just use these steps and haven't gotten many problems
reboot into recovery
backup
wipe data
flash rom
flash kernel (optional)
wipe cache
wipe dalvik cache
fix permissions
boot
wait 10 mins
reboot

Testimonyy said:
well typically any ROM that i flash i just use these steps and haven't gotten many problems
reboot into recovery
backup
wipe data
flash rom
flash kernel (optional)
wipe cache
wipe dalvik cache
fix permissions
boot
wait 10 mins
reboot
Click to expand...
Click to collapse
Yes but the superwipe does the same thing and it was built for lazy people. I always say "what ever floats your boat". :good:

[Q] Help me my galaxy wonder cant booting

Hello all,
My device is Galaxy Wonder gt8150..
im using cyanogen mod 10 alpha 7
recovery mode still default..
yesterday i try to update my kernel to yoon kernel chronos.. i install that kernel through recovery mode..
after installing kernel i reboot my device but when the reboot processing, it says cant access system/csc/xse/system..
what should i do? i cant access my external sd card too..

1. Make sure you flashed the right kernel. hadi made 2 versions of Yoon.kernel, one for ICS, and one for JB.
2. After flashing, did you remember to wipe cache + Dalvik cache? It's very important.
3. Try the following from your recovery: wipe cache, wipe Dalvik cache, Fix Permissions
4. If all fails, reflash your ROM, but this time, go the *Pristine* way (thread in the General forum).
Sent from my GT-I8150 using xda app-developers app

pepoluan said:
1. Make sure you flashed the right kernel. hadi made 2 versions of Yoon.kernel, one for ICS, and one for JB.
2. After flashing, did you remember to wipe cache + Dalvik cache? It's very important.
3. Try the following from your recovery: wipe cache, wipe Dalvik cache, Fix Permissions
4. If all fails, reflash your ROM, but this time, go the *Pristine* way (thread in the General forum).
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
hi pep, i have a question for u.
when I try to Flash Xistance 4.1.2 Rootbox for my W, its always stuck on Bootanimation (sometime "blank Screen" after Cyanogenmod logo Appear)???
(I have downloaded 2 .zip ROM from difference PC, and try to Flash with each ROM)
I did it with your pristine too.
it never happen when I Flash with Arco CM9 or CM10.
-----hope you see my post pep--

beehaapxl said:
hi pep, i have a question for u.
when I try to Flash Xistance 4.1.2 Rootbox for my W, its always stuck on Bootanimation (sometime "blank Screen" after Cyanogenmod logo Appear)???
(I have downloaded 2 .zip ROM from difference PC, and try to Flash with each ROM)
I did it with your pristine too.
it never happen when I Flash with Arco CM9 or CM10.
-----hope you see my post pep--
Click to expand...
Click to collapse
Probably one of the init.d scripts 'hung'.
If you're using TWRP, mount /system then go to /system/etc/init.d and rename *all* files there: append ".disabled" (without quotes) to each. Then, reboot.
Sent from my GT-I8150 using xda app-developers app

pepoluan said:
1. Make sure you flashed the right kernel. hadi made 2 versions of Yoon.kernel, one for ICS, and one for JB.
2. After flashing, did you remember to wipe cache + Dalvik cache? It's very important.
3. Try the following from your recovery: wipe cache, wipe Dalvik cache, Fix Permissions
4. If all fails, reflash your ROM, but this time, go the *Pristine* way (thread in the General forum).
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
thanks pep.. now my galaxy wonder fixed.. but i have some problem @[email protected]
im using Cyanogenmod 10, with athena kernel.. but why i cant use my wifi and tethering hot spot.. it cant be activated @[email protected]

pepoluan said:
Probably one of the init.d scripts 'hung'.
If you're using TWRP, mount /system then go to /system/etc/init.d and rename *all* files there: append ".disabled" (without quotes) to each. Then, reboot.
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
i'm using CWM Recovery. just do the same way or defferent??

beehaapxl said:
i'm using CWM Recovery. just do the same way or defferent??
Click to expand...
Click to collapse
AFAIK, CWM has no file manager, unlike TWRP...
That's why I prefer TWRP instead of CWM now. It's much more functional.
Sent from my GT-I8150 using xda app-developers app
---------- Post added at 06:38 PM ---------- Previous post was at 06:36 PM ----------
sinryu99 said:
thanks pep.. now my galaxy wonder fixed.. but i have some problem @[email protected]
im using Cyanogenmod 10, with athena kernel.. but why i cant use my wifi and tethering hot spot.. it cant be activated @[email protected]
Click to expand...
Click to collapse
Arco's latest kernel introduced a new driver, which needs changes in the ROM. Older ROMs won't work with the latest kernel, and vice versa.
Perhaps your kernel cooker hasn't integrated Arco's fix yet? Try asking the kernel maker...
Edit: That's why I refrain from flashing CM9RC7... @hadidjapri is busy with his finals, and Yoon.kernel Chronos is not compatible with CM9RC7...
Sent from my GT-I8150 using xda app-developers app

pepoluan said:
Probably one of the init.d scripts 'hung'.
If you're using TWRP, mount /system then go to /system/etc/init.d and rename *all* files there: append ".disabled" (without quotes) to each. Then, reboot.
Click to expand...
Click to collapse
pep, so.. after install the RootBox Rom and if its stuck on Boot logo then
mount /system then go to /system/etc/init.d and rename *all* files there: append ".disabled"
there is 2 file "00banner" and "90userinit" (it's in the CM10 Alpha 7 init.d) so i just rename the 2 file(just example) to "00banner.disabled" and "90userinit.disabled" and then reboot???
sorry pep, just want to make me sure.
thank u pep,
terima kasih
matur nuwun

beehaapxl said:
pep, so.. after install the RootBox Rom and if its stuck on Boot logo then
mount /system then go to /system/etc/init.d and rename *all* files there: append ".disabled"
there is 2 file "00banner" and "90userinit" (it's in the CM10 Alpha 7 init.d) so i just rename the 2 file(just example) to "00banner.disabled" and "90userinit.disabled" and then reboot???
sorry pep, just want to make me sure.
thank u pep,
terima kasih
matur nuwun
Click to expand...
Click to collapse
Yup. Also, remember to wipe cache and Dalvik cache. And Fix Permissions.
Sent from my GT-I8150 using xda app-developers app

pepoluan said:
Yup. Also, remember to wipe cache and Dalvik cache. And Fix Permissions.
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
sorry pep, it didn't work.
after install rom, wipe cache n dalvik, reboot, and blank screen.
reboot recovery, rename file under init.d, wipe cache and dalvik success.
fix permissions failed , because "failed because format system"mayb... owh I forget..
reboot system and still the same.

pepoluan said:
AFAIK, CWM has no file manager, unlike TWRP...
That's why I prefer TWRP instead of CWM now. It's much more functional.
Sent from my GT-I8150 using xda app-developers app
---------- Post added at 06:38 PM ---------- Previous post was at 06:36 PM ----------
Arco's latest kernel introduced a new driver, which needs changes in the ROM. Older ROMs won't work with the latest kernel, and vice versa.
Perhaps your kernel cooker hasn't integrated Arco's fix yet? Try asking the kernel maker...
Edit: That's why I refrain from flashing CM9RC7... @hadidjapri is busy with his finals, and Yoon.kernel Chronos is not compatible with CM9RC7...
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
hmm.. yeah i think its not compatible.. but now i change my kernel again.. hehe..
thx pep..