Hello all,
My device is Galaxy Wonder gt8150..
im using cyanogen mod 10 alpha 7
recovery mode still default..
yesterday i try to update my kernel to yoon kernel chronos.. i install that kernel through recovery mode..
after installing kernel i reboot my device but when the reboot processing, it says cant access system/csc/xse/system..
what should i do? i cant access my external sd card too..
1. Make sure you flashed the right kernel. hadi made 2 versions of Yoon.kernel, one for ICS, and one for JB.
2. After flashing, did you remember to wipe cache + Dalvik cache? It's very important.
3. Try the following from your recovery: wipe cache, wipe Dalvik cache, Fix Permissions
4. If all fails, reflash your ROM, but this time, go the *Pristine* way (thread in the General forum).
Sent from my GT-I8150 using xda app-developers app
pepoluan said:
1. Make sure you flashed the right kernel. hadi made 2 versions of Yoon.kernel, one for ICS, and one for JB.
2. After flashing, did you remember to wipe cache + Dalvik cache? It's very important.
3. Try the following from your recovery: wipe cache, wipe Dalvik cache, Fix Permissions
4. If all fails, reflash your ROM, but this time, go the *Pristine* way (thread in the General forum).
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
hi pep, i have a question for u.
when I try to Flash Xistance 4.1.2 Rootbox for my W, its always stuck on Bootanimation (sometime "blank Screen" after Cyanogenmod logo Appear)???
(I have downloaded 2 .zip ROM from difference PC, and try to Flash with each ROM)
I did it with your pristine too.
it never happen when I Flash with Arco CM9 or CM10.
-----hope you see my post pep--
beehaapxl said:
hi pep, i have a question for u.
when I try to Flash Xistance 4.1.2 Rootbox for my W, its always stuck on Bootanimation (sometime "blank Screen" after Cyanogenmod logo Appear)???
(I have downloaded 2 .zip ROM from difference PC, and try to Flash with each ROM)
I did it with your pristine too.
it never happen when I Flash with Arco CM9 or CM10.
-----hope you see my post pep--
Click to expand...
Click to collapse
Probably one of the init.d scripts 'hung'.
If you're using TWRP, mount /system then go to /system/etc/init.d and rename *all* files there: append ".disabled" (without quotes) to each. Then, reboot.
Sent from my GT-I8150 using xda app-developers app
pepoluan said:
1. Make sure you flashed the right kernel. hadi made 2 versions of Yoon.kernel, one for ICS, and one for JB.
2. After flashing, did you remember to wipe cache + Dalvik cache? It's very important.
3. Try the following from your recovery: wipe cache, wipe Dalvik cache, Fix Permissions
4. If all fails, reflash your ROM, but this time, go the *Pristine* way (thread in the General forum).
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
thanks pep.. now my galaxy wonder fixed.. but i have some problem @[email protected]
im using Cyanogenmod 10, with athena kernel.. but why i cant use my wifi and tethering hot spot.. it cant be activated @[email protected]
pepoluan said:
Probably one of the init.d scripts 'hung'.
If you're using TWRP, mount /system then go to /system/etc/init.d and rename *all* files there: append ".disabled" (without quotes) to each. Then, reboot.
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
i'm using CWM Recovery. just do the same way or defferent??
beehaapxl said:
i'm using CWM Recovery. just do the same way or defferent??
Click to expand...
Click to collapse
AFAIK, CWM has no file manager, unlike TWRP...
That's why I prefer TWRP instead of CWM now. It's much more functional.
Sent from my GT-I8150 using xda app-developers app
---------- Post added at 06:38 PM ---------- Previous post was at 06:36 PM ----------
sinryu99 said:
thanks pep.. now my galaxy wonder fixed.. but i have some problem @[email protected]
im using Cyanogenmod 10, with athena kernel.. but why i cant use my wifi and tethering hot spot.. it cant be activated @[email protected]
Click to expand...
Click to collapse
Arco's latest kernel introduced a new driver, which needs changes in the ROM. Older ROMs won't work with the latest kernel, and vice versa.
Perhaps your kernel cooker hasn't integrated Arco's fix yet? Try asking the kernel maker...
Edit: That's why I refrain from flashing CM9RC7... @hadidjapri is busy with his finals, and Yoon.kernel Chronos is not compatible with CM9RC7...
Sent from my GT-I8150 using xda app-developers app
pepoluan said:
Probably one of the init.d scripts 'hung'.
If you're using TWRP, mount /system then go to /system/etc/init.d and rename *all* files there: append ".disabled" (without quotes) to each. Then, reboot.
Click to expand...
Click to collapse
pep, so.. after install the RootBox Rom and if its stuck on Boot logo then
mount /system then go to /system/etc/init.d and rename *all* files there: append ".disabled"
there is 2 file "00banner" and "90userinit" (it's in the CM10 Alpha 7 init.d) so i just rename the 2 file(just example) to "00banner.disabled" and "90userinit.disabled" and then reboot???
sorry pep, just want to make me sure.
thank u pep,
terima kasih
matur nuwun
beehaapxl said:
pep, so.. after install the RootBox Rom and if its stuck on Boot logo then
mount /system then go to /system/etc/init.d and rename *all* files there: append ".disabled"
there is 2 file "00banner" and "90userinit" (it's in the CM10 Alpha 7 init.d) so i just rename the 2 file(just example) to "00banner.disabled" and "90userinit.disabled" and then reboot???
sorry pep, just want to make me sure.
thank u pep,
terima kasih
matur nuwun
Click to expand...
Click to collapse
Yup. Also, remember to wipe cache and Dalvik cache. And Fix Permissions.
Sent from my GT-I8150 using xda app-developers app
pepoluan said:
Yup. Also, remember to wipe cache and Dalvik cache. And Fix Permissions.
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
sorry pep, it didn't work.
after install rom, wipe cache n dalvik, reboot, and blank screen.
reboot recovery, rename file under init.d, wipe cache and dalvik success.
fix permissions failed , because "failed because format system"mayb... owh I forget..
reboot system and still the same.
pepoluan said:
AFAIK, CWM has no file manager, unlike TWRP...
That's why I prefer TWRP instead of CWM now. It's much more functional.
Sent from my GT-I8150 using xda app-developers app
---------- Post added at 06:38 PM ---------- Previous post was at 06:36 PM ----------
Arco's latest kernel introduced a new driver, which needs changes in the ROM. Older ROMs won't work with the latest kernel, and vice versa.
Perhaps your kernel cooker hasn't integrated Arco's fix yet? Try asking the kernel maker...
Edit: That's why I refrain from flashing CM9RC7... @hadidjapri is busy with his finals, and Yoon.kernel Chronos is not compatible with CM9RC7...
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
hmm.. yeah i think its not compatible.. but now i change my kernel again.. hehe..
thx pep..
Related
im currently on the android remics v3 by krazzy and installed forfivo v1 kernel i would like to make a full reformat of my galaxy w and restore this cwm rom and kernel can you give me instructions how to do and also how o intall the v6 script? thanks or even link will help thanks
Sent from my GT-I8150 using xda premium
Full Reformat? Do you mean Wipe all the data in your phone?
For the V6 you can go here for full-guide and downloads.
yes kreaz fukl reformat and then new install like
ur phone is new everything is new
Sent from my GT-I8150 using xda premium
Do you mean like: "Out-of-the-box?" If so,
1. Do you have ClockWorkMod? If you have CWM, you can easily Wipe All Data (Factory Reset, Wipe Cache Partition and Dalvik Cache).
2. Are you going back to your old ROM (I mean Stock ROM)? If so, you can go here to look for newest stock Firmware.
CMIIW.
i want also to remove the prev folder all of them
Sent from my GT-I8150 using xda premium
format
cris_ronel said:
im currently on the android remics v3 by krazzy and installed forfivo v1 kernel i would like to make a full reformat of my galaxy w and restore this cwm rom and kernel can you give me instructions how to do and also how o intall the v6 script? thanks or even link will help thanks
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
try this
.wipe data
.wipe cache partition
.wipe dalvik cache
.format system
.format cache
.format data
when trying to install a new rom i get the same error (status 7: some symlinks failed) with the cm10 and eclipse ROMs. I don't seem to have any trouble with Buglessbeast and euroskank. I have googled and searched XDA but none of the other threads are for the toroplus.
Edit: Thanks for all the help guys. I'm still having this problem.
Things i have tried: go into mounts and remove the top X on the list.(TWRP)
flashing a stock kernel gets me stuck in a boot loop.
I am using the franco kernel and had this same issue using CWM before switching to TWRP.
You can try this...
simms22 said:
try booting out of recovery into the bootloader, then back to recovery to reflash.
Click to expand...
Click to collapse
If you do a Google search you should find some information on it. Its something with the Franco kernel changing the sdcard. Have to download And move the original back into it's correct place
Sent from my Galaxy Nexus using xda premium
qbanlinxx said:
If you do a Google search you should find some information on it. Its something with the Franco kernel changing the sdcard. Have to download And move the original back into it's correct place
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Huh?
Op never even made mention to the word "kernel" in his post.
Not to mention kernel is not even running in recovery (which itself is a small os).
Sent from my i9250
natheist411 said:
when trying to install a new rom i get the same error (status 7: some symlinks failed) with the cm10 and eclipse ROMs. I don't seem to have any trouble with Buglessbeast and euroskank. I have googled and searched XDA but none of the other threads are for the toroplus.
Click to expand...
Click to collapse
Are you using TWRP recovery? If you are that's the issue. The latest update has a flaw, you have to go into recovery, go into mounts and remove the top X on the list. They said they where working on releasing a correction for it. If your not on TWRP then I don't know what's going on.
Sent from my Galaxy Nexus
I was using cwm but switched to TWRP to retry. Same issue.
Sent from my Galaxy Nexus using xda app-developers app
natheist411 said:
I was using cwm but switched to TWRP to retry. Same issue.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Try it when you get into recovery, go to mounts, remove the X on the top option on the list then flash the rom see if it works.
Sent from my Galaxy Nexus
I had this same issue yesterday, and it was related to flashing a kernel. Sorry for trying to help
bk201doesntexist said:
Huh?
Op never even made mention to the word "kernel" in his post.
Not to mention kernel is not even running in recovery (which itself is a small os).
Sent from my i9250
Click to expand...
Click to collapse
Sent from my Galaxy Nexus using xda premium
qbanlinxx said:
I had this same issue yesterday, and it was related to flashing a kernel. Sorry for trying to help
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I have also seen something similar. What most people don't realize is the some kernels, including Franco, change things in /system as well, which messes with some things.
Sent from my Galaxy Nexus using Tapatalk 2
Okay, thanks. I was not aware of this. Will checkout some kernel zips to see what's going on.
edfunkycold said:
Try it when you get into recovery, go to mounts, remove the X on the top option on the list then flash the rom see if it works.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
I tried this. Still the same outcome. Thanks anyways.
Has this been fixed? I cant install any ROM!
I have exactly the same problem! I am using stock kernal, was using franco kernal before that.
Milamber said:
Has this been fixed? I cant install any ROM!
I have exactly the same problem! I am using stock kernal, was using franco kernal before that.
Click to expand...
Click to collapse
no one here was help but i think i figured it out myself.
try this and see if it works.
when you go to install the rom, before doing so wipe data (factory reset) three times.
i was so frustrated about it i finally said **** it and didnt care if i lost everything, but i didnt loose anything so all is well.
let me know if that works
(status 7) some symlinks failed
I'm fixed this problem, PLEASE ADD THIS POST TO FAQ . Just install Android Commander and copy ROM to phone via it, now i'm on JellyBam android 4.1.2.
1.Install root+busybox.
2.Install via stock recovery siyah 5.0b2
3.In siyah recovery do factory reset
4.Flash any custom ROM
5.Do factory reset, wipe cache, wipe Dalvik cache.
6.Be happy, enjoy.
I'm tryied many recoveryes and kernels, but the problem is in copying process(now all zip's have good CRC, and MD5). . Give me a beer
JeyLo said:
(status 7) some symlinks failed
I'm fixed this problem, PLEASE ADD THIS POST TO FAQ . Just install Android Commander and copy ROM to phone via it, now i'm on JellyBam android 4.1.2.
1.Install root+busybox.
2.Install via stock recovery siyah 5.0b2
3.In siyah recovery do factory reset
4.Flash any custom ROM
5.Do factory reset, wipe cache, wipe Dalvik cache.
6.Be happy, enjoy.
Click to expand...
Click to collapse
Huh? What is siyah 5.0b2???
I did a manual "format /system" from Clock Work Recovery, fixed it for me, Seems the Wipe/Factory reset does not reset the system partition correctly for some strange reason.
This was an issue after a custom kernel.
Milamber said:
Huh? What is siyah 5.0b2???
Click to expand...
Click to collapse
He's on a different device.
Sent from my i9250
chrisjenx2001 said:
I did a manual "format /system" from Clock Work Recovery, fixed it for me, Seems the Wipe/Factory reset does not reset the system partition correctly for some strange reason.
This was an issue after a custom kernel.
Click to expand...
Click to collapse
Wipe/Factory reset does not touch the system partition at all. This is normal. It only wipes the userdata partition.
chrisjenx2001 said:
I did a manual "format /system" from Clock Work Recovery, fixed it for me, Seems the Wipe/Factory reset does not reset the system partition correctly for some strange reason.
This was an issue after a custom kernel.
Click to expand...
Click to collapse
Had a bad download and on initial install I formatted system however it failed. Went back and formatted system and cache manually and worked for me.
I'm not sure if this is related, but I read in the MMuzzy's Jelly Bean 4.2.1 thread (http://forum.xda-developers.com/showthread.php?t=1762846, first post specifically) that unmounting /system fixes this problem, and sure enough it solved the problem for me when I tried to flash that ROM.
I Installed Paranoid (Last Ver.) WiFi Not Working ..
Then... I installed Nova ( Last Ver..) WiFi Not Working..
What i Have To Do
How is it not working? You can't acces wifi settings? Scanning doesn't result anything? You can connect but internet still doesn't work? Which kernel are you using?
Try re flashing this way....
Assuming you did a backup before... (and was on pac18)
Wipe data factory reset
Wipe cache
Wipe dvalik
Format system
Flash rom
Fix permissions
Reboot up to start screen (as if it is first loaded screen)
Hold volume up and power to reboot into recovery.
Advanced restore the data only from your backup.
Wipe cache and dvalik again
Reboot
(will probably work from just backing up what you have now)
Sent from my Jellybean Xperia S
Ben36 said:
Try re flashing this way....
Assuming you did a backup before... (and was on pac18)
Wipe data factory reset
Wipe cache
Wipe dvalik
Format system
Flash rom
Fix permissions
Reboot up to start screen (as if it is first loaded screen)
Hold volume up and power to reboot into recovery.
Advanced restore the data only from your backup.
Wipe cache and dvalik again
Reboot
(will probably work from just backing up what you have now)
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
i already did what u said ... and it Just keep searching for networks for hours and nothing Happens.... :S Really i got Mad
Keep In Mind That I Have Backup For Ice cream Sandwich Rom On That Rom WiFi Working Normally
And Installed Nova Kernel... And Nova Rom.... Before Nova I Installed Paranoid and its Kernel and The Same Prop.
What I Have To Do....
That's very strange. Ask the devs on the actual pax thread itself. Any times I've seen wifi problems its that wifi itself won't turn on at all. But you're saying it does turn on fine. But just won't find anything
Sent from my Jellybean Xperia S
Surf in net and try to find WiFi modules.zip file for xsx and flash it that might help
Sent from my Xperia S using xda app-developers app
anadarco7 said:
Surf in net and try to find WiFi modules.zip file for xsx and flash it that might help
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
Bro I cant Find any module Working.. What To Do???
Ben36 said:
That's very strange. Ask the devs on the actual pax thread itself. Any times I've seen wifi problems its that wifi itself won't turn on at all. But you're saying it does turn on fine. But just won't find anything
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
OkaY But I Know No One Will Answer Me
Ask in the xsspeed kernel thread as there was definitely a flashable zip of wifi modules in there somewhere. But ages ago
Sent from my Jellybean Xperia S
---------- Post added at 11:26 AM ---------- Previous post was at 11:16 AM ----------
Found this -
http://db.tt/q6pBu6Ub
Sent from my Jellybean Xperia S
Here is the WiFi module link
http://www.sendspace.com/file/56jxga
Flash/paste it to /system/lib/modules
With correct permissions
X X
X
X
Reboot and than report
paste what????
after flashing and coping and fixing i reboot then its stopping on boot animation ... :S
Any 'help???
MaDa.. said:
Any 'help???
Click to expand...
Click to collapse
I'd say do a nandroid backup from recovery so you'll have it booting up again. If you have a backup that is.
Then either flash or copy the files don't think you have to do both. And its usually safer to flash as you'll gett the right permission on the files.
Sent from my Xperia S using xda app-developers app
Jmjguru said:
I'd say do a nandroid backup from recovery so you'll have it booting up again. If you have a backup that is.
Then either flash or copy the files don't think you have to do both. And its usually safer to flash as you'll gett the right permission on the files.
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
i didnt understand ...
I think he means restore your backup so its 'as before you tried the wifi mods'
Then just do one, like flash my zip and reboot rather than do it all at once
Sent from my Jellybean Xperia S
MaDa.. said:
I Installed Paranoid (Last Ver.) WiFi Not Working ..
Then... I installed Nova ( Last Ver..) WiFi Not Working..
What i Have To Do
Click to expand...
Click to collapse
Can you change baseland on Xperia S ? Because I've got the same problem On my HTC and it was because of the Baseland...
Sent from my HTC Sensation Z710e using xda premium
seb_labine said:
Can you change baseland on Xperia S ? Because I've got the same problem On my HTC and it was because of the Baseland...
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
How May I Change My Baseland....
Ben36 said:
I think he means restore your backup so its 'as before you tried the wifi mods'
Then just do one, like flash my zip and reboot rather than do it all at once
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
I Tried To Clean Install With Out Any More Data Its Same Prop..
Well look I installed that rom and after a few time of use the screen turn off for a moment and when the screen turn on again the bright turn higher and its very annoying please someone know why is it? and how can I fix it? please help me, thank you
holayoo said:
Well look I installed that rom and after a few time of use the screen turn off for a moment and when the screen turn on again the bright turn higher and its very annoying please someone know why is it? and how can I fix it? please help me, thank you
Click to expand...
Click to collapse
auto brightness turned on maybe?
why do you guys make all these treads about CM 10.1 when there is a tread for general talk about this rom
http://forum.xda-developers.com/showthread.php?t=2061971
CataHd said:
why do you guys make all these treads about CM 10.1 when there is a tread for general talk about this rom
http://forum.xda-developers.com/showthread.php?t=2061971
Click to expand...
Click to collapse
¬¬ Maybe because the new members (like me) we must have at least 10 threads to comment on a topic
we are noob
CataHd said:
why do you guys make all these treads about CM 10.1 when there is a tread for general talk about this rom
http://forum.xda-developers.com/showthread.php?t=2061971
Click to expand...
Click to collapse
and because we have a right to post where ever we want we are just looking for some answers and suggestions for the thread that we are looking for
CM9 Final 3
holayoo said:
Well look I installed that rom and after a few time of use the screen turn off for a moment and when the screen turn on again the bright turn higher and its very annoying please someone know why is it? and how can I fix it? please help me, thank you
Click to expand...
Click to collapse
why don't you try CM9 final3 by: maclaw studio?
here the link if you are interested http://galaxyics.com/
badagila said:
why don't you try CM9 final3 by: maclaw studio?
here the link if you are interested http://galaxyics.com/
Click to expand...
Click to collapse
it's actually what I just did, got here because I'm having issues with the encryption unsuccessful... how'd you get around that?
I went with CWM 5 (signed version 5.0.2.7 ext4+rfs) and then proceeded to install CM9 final 3.
all went according to directions but then I got that msg and the reset button that doesn't do squat...
tried a search for the error message there but couldn't really pinpoint a working solution. so for now i just odin'd back the latest fw for the S5660 (ie S5660XXKTL_S5660XXKT7_S5660DBTKT1_HOME - Germany)
Reason i'm doing all this is because I believe the German baseband is different that the Canadian one (for Telus) since I'm not getting any reception from my provider but i'm able to get (detect) another one...
thanks for your time...
Did you wipe/factory reset?
And wipe dalvik cache?
Sent from my GT-S5660 using xda premium
badagila said:
Did you wipe/factory reset?
And wipe dalvik cache?
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
I did the wipe/factory reset after the flash (just following the directions)
I tried to wipe the dalvik but it would go back to the main cwm menu, not letting me select yes
Try this steps:
1. Wife/factory reset
2. Wife cache partition
3. Advance wife dalvic cache/ bat stats
4. Install from sd car
5. Choose from sd card
6. Choose the rom that you want to install wait untill its finish and reboot your phone
Sent from my GT-S5660 using xda premium
---------- Post added at 12:28 AM ---------- Previous post was at 12:27 AM ----------
Try to do that befote installation and not after installation dude
Sent from my GT-S5660 using xda premium
badagila said:
Try this steps:
1. Wife/factory reset
2. Wife cache partition
3. Advance wife dalvic cache/ bat stats
4. Install from sd car
5. Choose from sd card
6. Choose the rom that you want to install wait untill its finish and reboot your phone
Sent from my GT-S5660 using xda premium
---------- Post added at 12:28 AM ---------- Previous post was at 12:27 AM ----------
Try to do that befote installation and not after installation dude
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
Sorry but the real answer is that op might be coming from stock rom so he needs this file for sucessful installnation
ext4-fomatter.zip(thanks to phiexz)
http://www.mediafire.com/?8p6s9mlpqwowq51
How to install this?
1.Wipe data and cache
2.Install this ext4-formatter
3.Install ur rom
4.Reboot and no more encryption unsucessful problems!
NOTE: Dalvik cache is wiped when wiping cache so its not needed!
press thanks if it helped!
This will help anyone who keeps having flashing issues.
More detailed instructions in my GUIDE!
http://forum.xda-developers.com/showthread.php?t=2295557
THIS IS ONE QUICK/SIMPLE ERROR FREE ROM FLASHING PROCEDURE
This should eliminate a few posts saying, stuck in download mode, stuck at logo. just vibrates and them MANY other issues that somehow, everyone seems to find.
Here is my quick rom flashing process I use ALWAYS (yes always)
THINGS YOU NEED ON extSDCARD
1. Extra kernels (2 or 3 you know works for your device)
2. Optional: 2 recoveries that can be flashed (I use CWM & TWRP)
3. Optional: apps.zip (a zip created from Titantium BU, containing Root Explorer, TU Backup, Quickpic, ES File Explorer and Terminal Emulator)
Flashing the rom: TOUCHWIZ/AOSP ROMS
1. Backup current rom (to the extsdcard)
2. Complete wipe, (I do complete, some people do not) Complete = No Issues [FACTORY RESET + CLEAR CACHE + CLEAR DALVIK CACHE + CLEAR DATA]
3. Flash the rom
4. Flash the kernel (your device kernel) (I know some roms have their own kernel) this is where your problems start.
AGAIN: FLASH YOUR KERNEL, you KNOW it works. 1 more time FLASH YOUR KERNEL. (you can experiment with other kernels after you boot)
AOSP ROMS - require you to flash gapps before you boot. [This is not required for TouchWiz roms]
5. Boot the rom.
FINISHED!!!! SUCCESS!!!
Total time to flash a rom:
7-10min
Errors - NONE
This goes for every rom in my guide.
TIPS:
This flash procedure is for Touchwiz Roms, if you are flashing AOSP roms, you must flash the gapps package associated with the rom you are flashing.
**** SGH-I337M Users: Often requires flashing a different kernel than the one included in most ATT ROMS. Any GT-i9505 kernel will work and Adam kernel and Faux kernel are both confirmed working for us Canadian users.
Note: Flash KERNEL directly after ROM then reboot device.
[Special thanks to blyndfyre for this helpful tip].
The extra recovery I flash if a rom does not like the recovery I am using.
Yes, you can flash recoveries back and forth.
Apps.zip I flash after the rom is up & running. This I use to get the rom setup (like root explorer and others needed)
I am in no way responsible for anything that may do damage to any device - Use these tips at your own risk - period!
If you found this useful in any way, please hit the THANKS button for my effort.
You're forgetting to wipe Cache a D Dalvik Cache after you flash everything and to Fix Permissions at the end.
But, thanks for the guide
Sent from my SGH-M919 using xda app-developers app
kevinrubio1 said:
You're forgetting to wipe Cache a D Dalvik Cache after you flash everything and to Fix Permissions at the end.
But, thanks for the guide
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Lol. That's so unnecessary. Fixing permissions after you flash a ROM does absolutely nothing. You only fix permissions with mods or apps that you're flashing.
Sent from my SGH-M919 using xda app-developers app
That is what I use, no need to make chages to something I KNOW works, this is a simple flash procedure. No need to make it anymore complicated than it is not.
that make sense?
tikay00 said:
Lol. That's so unnecessary. Fixing permissions after you flash a ROM does absolutely nothing. You only fix permissions with mods or apps that you're flashing.
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Absolutely correct.
Thanks, for clearing that up.
(out of thanks for today)
I will try an catch you later on.
kevinrubio1 said:
You're forgetting to wipe Cache a D Dalvik Cache after you flash everything and to Fix Permissions at the end.
But, thanks for the guide
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
You are welcome, and if you master this, you can flash ANY ROM, I know, I have done to many over the years.
tikay00 said:
Lol. That's so unnecessary. Fixing permissions after you flash a ROM does absolutely nothing. You only fix permissions with mods or apps that you're flashing.
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
TheAxman said:
That is what I use, no need to make chages to something I KNOW works, this is a simple flash procedure. No need to make it anymore complicated than it is not.
that make sense?
Click to expand...
Click to collapse
Doing what I said is for an even safer procedure. It won't harm from wiping cache or Dalvik
Sent from my SGH-M919 using xda app-developers app
Complete wipe, means all of the above.
TheAxman said:
Complete wipe, means all of the above.
Click to expand...
Click to collapse
In your OP you did not include what to wipe, that would be helpful
Sent from my SGH-M919 using xda app-developers app
TheAxman said:
Absolutely correct.
Thanks, for clearing that up.
(out of thanks for today)
I will try an catch you later on.
Click to expand...
Click to collapse
I got ya.
Sent from my SGH-M919 using xda app-developers app
Should be the easiest thing you have done yet.
[updated op]
Hmm so everyone is a now a Oriental Flash Master from the far East now huh?
[updated: 07-12-2013]
thanks
good solutions!!!