Develop Bugs

android market problem

my android market is not working when i want do dowload something it says could not dowload file because of error 492
what's the problem and how can i fix it ???
sorry for my english i know its bad but i hope you understand me

ivanboba said:
my android market is not working when i want do dowload something it says could not dowload file because of error 492
what's the problem and how can i fix it ???
sorry for my english i know its bad but i hope you understand me
Click to expand...
Click to collapse
try this
"http://www.mediafire.com/?gd99r8388mon1qc"
Download and install the .apk
then check if does work

still the same problem help me pls

Why do we even have a search function in this forum?
Sent from my HTC_A510c

what are, you talking about, post something that can help me or shut ce fu*k up
from my DeSiRe S android 2.3.5 sense 3.0 stock using XDA App

SpyMike said:
try this
"***.mediafire.com/?gd99r8388mon1qc"
Download and install the .apk
then check if does work
Click to expand...
Click to collapse
What version of Market is this, plz? I'm using v3.4.4 from unofficial CM702-KANG.

Knut-PV11 said:
What version of Market is this, plz? I'm using v3.4.4 from unofficial CM702-KANG.
Click to expand...
Click to collapse
the same wersion but still not working market on my wildfire s when i go to dowload it says could not dowload file because of error 492 how can i fix it can anyone help me

go recovery and then advanced and wipe dalvik cache this will fix ur problem
i had the same problem and fixed it with this way
try it

hanynemesis said:
go recovery and then advanced and wipe dalvik cache this will fix ur problem
i had the same problem and fixed it with this way
try it
Click to expand...
Click to collapse
can you give me some instructions i don't know how to do that can you help me pls

if u just upgrade to 2.3.5 and simply make a factory reset. in the last week who installed 2.3.5 everyone got this market issue. just a simple factory reset

Take your battery out, put it in, hold volume down and push the power button, hold down till it goes into hboot, wait a few seconds while it scans for files, then use volume down to go to recovery and push power to select the option. Once in recovery go to advanced, wipe dalvik cache, and select yes to wipe, then reboot. It will take longer to boot the first time while it rebuilds the cache.
But If u don't know what the dalvik cache is or how to boot into recovery, then im assuming u probably don't have a recovery installed. U need to be root and install cwm5 following the guides on this forum.
Unless there is some app u can use or some other way I'm unaware of to wipe dalvik
Do your research before asking such a stupid question please.
Sent from my AT100 using Tapatalk

ivanboba said:
what are, you talking about, post something that can help me or shut ce fu*k up
from my DeSiRe S android 2.3.5 sense 3.0 stock using XDA App
Click to expand...
Click to collapse
Dude, just follow the rules and use the search function. If the xda search function doesn't work to your liking, use Google.
And stop acting like a 12 yr old girl. Nobody wants to hear that crap.
Sent from my HTC Wildfire S using Tapatalk

hanynemesis said:
go recovery and then advanced and wipe dalvik cache this will fix ur problem
i had the same problem and fixed it with this way
try it
Click to expand...
Click to collapse
Thanks for you info. I don´t need to re/install a new Market and it's seems to work properly.

problem fixed with a factory reset thanks )

[Q] How to get CM7 zip for defy???

Hey guys I m very confused for getting cm7 file...actually I didn't found that...so plz if have direct link then plz upload here...
Thanx...
Sent from my MB525 using xda premium

http://defy.wdscript.fr/jordan-nightly/
Epsylon3 nightly version

All files are compulsory???
Sent from my MB525 using xda premium

use a stable version
[ http://download.cyanogenmod.com/?type=stable&device=umts_jordan ]
root your phone
install 2ndinit
copy cm7 zip to sd card
go to recovery mode
go custom recovery
select "choose a zip from sd card"
select cm7 zip
then install GAPPS [you can find here on XDA]
enjoy it

MrNiick said:
use a stable version
root your phone
install 2ndinit
copy cm7 zip to sd card
go to recovery mode
go custom recovery
select "choose a zip from sd card"
select cm7 zip
then install GAPPS [you can find here on XDA]
enjoy it
Click to expand...
Click to collapse
Have to agree here - the official CM7 version is very, very good. Our devs are rapidly finalizing CM9 too, but it's not ready for prime time yet.

Thanks dude
Sent from my MB525 using xda premium

Thanx buddy...for this easy info...
Sent from my MB525 using xda premium

Hey,
i tried to install it to my MB525. after installing the zip file i tried to reboot it, but it only showed up the boot screen for some hours. Now the phone turned off and doesnt start again?
I tried to plugin it into my PC but the only thing that happens is that the LED turns on (white).
Is there a way to restore it, or is it completely destroyed?
Thank you for help
Edit: sorry, right after posting it i tried to plugin it again and now I can see the Boot screen again
But i only saw it for some minutes and know it is turned off again. (except the LED)
Edit2: sometimes when i try to start my defy i can access the boot menu but then it turns off after some seconds, too :/
Do you know something to fix it?

Man this is the big problem...now I m confused for installing that zip...and i dont know the solution...
Experts plz help us...
Thanx...
Sent from my MB525 using xda premium

shaGGy5678 said:
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
Does that mean you got your defy working again and you only want to try upgrading again, or do you have the same phone two times?
If you was able to restore your Phone: how?

first for sack148, did you wiped dalvik cache on recovery mode?
can you reach recovery mode?
now for shaggy
dude, it's safe, just don't forget to wipe dalvik cache, it can be the answer for sack148's problem
oh, and sorry for didn't mentioned it before, i didn't wiped dalvik cache and my defy works, :S
sorry again

Thanx NIICK...I already wipe that data...and now I am going to install that zip...
Sent from my MB525 using xda premium

just make sure you have a nandroid copy of your stock rom and a fully charge battery

Ohhh thanx mr. Mckarty...
Really. I dont know that...
Sent from my MB525 using xda premium

you don't really need a nandroid backup, it's just in case of something goes wrong, but, you always have all versions of stock sbfs here on XDA.
just follow my tuto, and you should be fine

Dude after installing cyanogenmod 7.1.0, my defy is not going further the boot screen untill the battery is drained, I am also unable to access the boot menu.. Please suggest the solution...
Sent from my MB526 using XDA

im not able to get to the screen where i can select the boot custom recovery it only has the options, wipe cache, wipe factory reset and reboot..

jlaloon said:
im not able to get to the screen where i can select the boot custom recovery it only has the options, wipe cache, wipe factory reset and reboot..
Click to expand...
Click to collapse
Do you install CWM room manag,2nd init?
---------- Post added at 05:45 AM ---------- Previous post was at 05:38 AM ----------
jlaloon said:
im not able to get to the screen where i can select the boot custom recovery it only has the options, wipe cache, wipe factory reset and reboot..
Click to expand...
Click to collapse
MrNiick said:
you don't really need a nandroid backup, it's just in case of something goes wrong, but, you always have all versions of stock sbfs here on XDA.
just follow my tuto, and you should be fine
Click to expand...
Click to collapse
That's why you need a nandroid backup, when SOME THING goes wrong!!!!!!! If you don't know what to do read this it will be so help full http://forum.xda-developers.com/showthread.php?t=1216982

ok so i redid it again i just selected the wrong 2ndinit another question?how can i disable the charging LED light on CM7 >.< cant seem to find it in the settings unlike with the stock ROM that has ability to disable..

jlaloon said:
ok so i redid it again i just selected the wrong 2ndinit another question?how can i disable the charging LED light on CM7 >.< cant seem to find it in the settings unlike with the stock ROM that has ability to disable..
Click to expand...
Click to collapse
well, on CM7 stable you cant disable LED, that option has been added in CM7.2 nightlies, which i m using.
I dont remember if its there in latest nightlies of CM7.

Urgent!! Need assistance.

Hi,
I tried to flash CyanogenMod today from JellyBellyv3.
It originally worked, but it wouldn't sync my google contacts, wouldn't let me open the play store or gmail app, so I decided to reformat.
Now nothing of mine is on the phone, play store isn't available even and it won't let me sync whatsoever.
What the hell did I do and how do I fix this? XD
-Mike

Flash GAPPS?

Sounds like you didnt flash gapps after flashing the rom.
Get it here: http://goo.im/gapps

El Daddy said:
Sounds like you didnt flash gapps after flashing the rom.
Get it here: http://goo.im/gapps
Click to expand...
Click to collapse
Question is, how do I flash this without rom manager?

Aerolith514 said:
Question is, how do I flash this without rom manager?
Click to expand...
Click to collapse
CWM???
Sent from my i9250

Think I got it, sorry I'm really new at this.
Hopefully I can sync all my contacts & jazz now :X

Made it worse...now i'm stuck at the "Welcome to galaxy nexus" and the wizard keeps crashing.

Aerolith514 said:
Made it worse...now i'm stuck at the "Welcome to galaxy nexus" and the wizard keeps crashing.
Click to expand...
Click to collapse
Did you wipe data before flashing CM10? It's best to wipe data when changing to a different rom.
Steps are:
1) wipe data
2) Flash ROM
3) Flash Gapps
4) Reboot
EDIT: Also make sure you are flashing the 20121110 gapps if you are running CM10 with 4.1.2

Wipe all data from CWM?
Question being, if I entirely reformat, will CWM still be there?
I had downloaded the wrong gapps, I'm gonna try using the right one now.

Aerolith514 said:
Wipe all data from CWM?
Question being, if I entirely reformat, will CWM still be there?
I had downloaded the wrong gapps, I'm gonna try using the right one now.
Click to expand...
Click to collapse
Just user data

Aerolith514 said:
Wipe all data from CWM?
Question being, if I entirely reformat, will CWM still be there?
I had downloaded the wrong gapps, I'm gonna try using the right one now.
Click to expand...
Click to collapse
No, Wipe data will just wipe any of the ROM data
Also wipe cache then advanced/wipe davik cache
Everything will still be on your sdcard
Sent from my Galaxy Nexus using XDA Premium HD app
---------- Post added at 09:13 PM ---------- Previous post was at 09:09 PM ----------
These are the latest JBean Gapps 10/11/2012 http://goo.im/gapps/gapps-jb-20121011-signed.zip
Sent from my Galaxy Nexus using XDA Premium HD app

You rock.
Crisis averted. Running CM10. Just gotta re-download all my apps, but everything sync'd well otherwise.
Thanks a ton for helping out a noob.
-mike

Aerolith514 said:
You rock.
Crisis averted. Running CM10. Just gotta re-download all my apps, but everything sync'd well otherwise.
Thanks a ton for helping out a noob.
-mike
Click to expand...
Click to collapse
whenever you change roms, you need to wipe data/cache otherwise you might up with similar problems again.

[Q] What's wrong with my phone? Help!

After rooting to CM2RC2, when rebooting it stuck at "Samsung Galaxy W Wonder GT-18150 cyanogen(mod) page.. & I did do back up at first, but it failed and damaged my SD card, after that I thought it didn't matter because the zip files were still visible, and that sometimes when I reboot, my SD card is working, but not showing on comp. And yes, I skipped the Nandroid backup. PLEASE HELP. :crying:

meeshvl said:
After rooting to CM2RC2, when rebooting it stuck at "Samsung Galaxy W Wonder GT-18150 cyanogen(mod) page.. & I did do back up at first, but it failed and damaged my SD card, after that I thought it didn't matter because the zip files were still visible, and that sometimes when I reboot, my SD card is working, but not showing on comp. And yes, I skipped the Nandroid backup. PLEASE HELP. :crying:
Click to expand...
Click to collapse
Seems you experience an awful lot today. But it happens to everyone's first time.
Go to recovery mode, reflash CM9RC2 and Gapps. Then factory reset - Clear cache - Wipe Dalvik Cache - Fix permission. These are important steps. If you miss either one it might cause problems.

Try going pristine and btw I'd you post a brick problem you need to say if you can access download/recovery mode.
Go to the general section to know what, why and how to do a pristine flashing, it will end your problems.
Just to make sure, did you follow Arco's instructions carefully? Pristine is always better but those instructions some times work great.
Sent from my GT-I8150 using xda app-developers app

KiD3991 said:
Seems you experience an awful lot today. But it happens to everyone's first time.
Go to recovery mode, reflash CM9RC2 and Gapps. Then factory reset - Clear cache - Wipe Dalvik Cache - Fix permission. These are important steps. If you miss either one it might cause problems.
Click to expand...
Click to collapse
Hahaa, I see we have a stalker. LOLjk
Uhmm, I just did that, but it doesn't work. Still stuck. :crying:
7amada100 said:
Try going pristine and btw I'd you post a brick problem you need to say if you can access download/recovery mode.
Go to the general section to know what, why and how to do a pristine flashing, it will end your problems.
Just to make sure, did you follow Arco's instructions carefully? Pristine is always better but those instructions some times work great.
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
I did! Well, uhm.. I followed keithross39 one, because I managed to do step 1 well!
I am readingg it now. :angel:

help me
Sent from my GT-I8150 using XDA Free mobile app
---------- Post added at 12:17 AM ---------- Previous post was at 12:14 AM ----------
front camera for socail is not working
Sent from my GT-I8150 using XDA Free mobile app
---------- Post added at 12:22 AM ---------- Previous post was at 12:17 AM ----------
Sent from my GT-I8150 using XDA Free mobile app

[Q] Help me my galaxy wonder cant booting

Hello all,
My device is Galaxy Wonder gt8150..
im using cyanogen mod 10 alpha 7
recovery mode still default..
yesterday i try to update my kernel to yoon kernel chronos.. i install that kernel through recovery mode..
after installing kernel i reboot my device but when the reboot processing, it says cant access system/csc/xse/system..
what should i do? i cant access my external sd card too..

1. Make sure you flashed the right kernel. hadi made 2 versions of Yoon.kernel, one for ICS, and one for JB.
2. After flashing, did you remember to wipe cache + Dalvik cache? It's very important.
3. Try the following from your recovery: wipe cache, wipe Dalvik cache, Fix Permissions
4. If all fails, reflash your ROM, but this time, go the *Pristine* way (thread in the General forum).
Sent from my GT-I8150 using xda app-developers app

pepoluan said:
1. Make sure you flashed the right kernel. hadi made 2 versions of Yoon.kernel, one for ICS, and one for JB.
2. After flashing, did you remember to wipe cache + Dalvik cache? It's very important.
3. Try the following from your recovery: wipe cache, wipe Dalvik cache, Fix Permissions
4. If all fails, reflash your ROM, but this time, go the *Pristine* way (thread in the General forum).
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
hi pep, i have a question for u.
when I try to Flash Xistance 4.1.2 Rootbox for my W, its always stuck on Bootanimation (sometime "blank Screen" after Cyanogenmod logo Appear)???
(I have downloaded 2 .zip ROM from difference PC, and try to Flash with each ROM)
I did it with your pristine too.
it never happen when I Flash with Arco CM9 or CM10.
-----hope you see my post pep--

beehaapxl said:
hi pep, i have a question for u.
when I try to Flash Xistance 4.1.2 Rootbox for my W, its always stuck on Bootanimation (sometime "blank Screen" after Cyanogenmod logo Appear)???
(I have downloaded 2 .zip ROM from difference PC, and try to Flash with each ROM)
I did it with your pristine too.
it never happen when I Flash with Arco CM9 or CM10.
-----hope you see my post pep--
Click to expand...
Click to collapse
Probably one of the init.d scripts 'hung'.
If you're using TWRP, mount /system then go to /system/etc/init.d and rename *all* files there: append ".disabled" (without quotes) to each. Then, reboot.
Sent from my GT-I8150 using xda app-developers app

pepoluan said:
1. Make sure you flashed the right kernel. hadi made 2 versions of Yoon.kernel, one for ICS, and one for JB.
2. After flashing, did you remember to wipe cache + Dalvik cache? It's very important.
3. Try the following from your recovery: wipe cache, wipe Dalvik cache, Fix Permissions
4. If all fails, reflash your ROM, but this time, go the *Pristine* way (thread in the General forum).
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
thanks pep.. now my galaxy wonder fixed.. but i have some problem @[email protected]
im using Cyanogenmod 10, with athena kernel.. but why i cant use my wifi and tethering hot spot.. it cant be activated @[email protected]

pepoluan said:
Probably one of the init.d scripts 'hung'.
If you're using TWRP, mount /system then go to /system/etc/init.d and rename *all* files there: append ".disabled" (without quotes) to each. Then, reboot.
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
i'm using CWM Recovery. just do the same way or defferent??

beehaapxl said:
i'm using CWM Recovery. just do the same way or defferent??
Click to expand...
Click to collapse
AFAIK, CWM has no file manager, unlike TWRP...
That's why I prefer TWRP instead of CWM now. It's much more functional.
Sent from my GT-I8150 using xda app-developers app
---------- Post added at 06:38 PM ---------- Previous post was at 06:36 PM ----------
sinryu99 said:
thanks pep.. now my galaxy wonder fixed.. but i have some problem @[email protected]
im using Cyanogenmod 10, with athena kernel.. but why i cant use my wifi and tethering hot spot.. it cant be activated @[email protected]
Click to expand...
Click to collapse
Arco's latest kernel introduced a new driver, which needs changes in the ROM. Older ROMs won't work with the latest kernel, and vice versa.
Perhaps your kernel cooker hasn't integrated Arco's fix yet? Try asking the kernel maker...
Edit: That's why I refrain from flashing CM9RC7... @hadidjapri is busy with his finals, and Yoon.kernel Chronos is not compatible with CM9RC7...
Sent from my GT-I8150 using xda app-developers app

pepoluan said:
Probably one of the init.d scripts 'hung'.
If you're using TWRP, mount /system then go to /system/etc/init.d and rename *all* files there: append ".disabled" (without quotes) to each. Then, reboot.
Click to expand...
Click to collapse
pep, so.. after install the RootBox Rom and if its stuck on Boot logo then
mount /system then go to /system/etc/init.d and rename *all* files there: append ".disabled"
there is 2 file "00banner" and "90userinit" (it's in the CM10 Alpha 7 init.d) so i just rename the 2 file(just example) to "00banner.disabled" and "90userinit.disabled" and then reboot???
sorry pep, just want to make me sure.
thank u pep,
terima kasih
matur nuwun

beehaapxl said:
pep, so.. after install the RootBox Rom and if its stuck on Boot logo then
mount /system then go to /system/etc/init.d and rename *all* files there: append ".disabled"
there is 2 file "00banner" and "90userinit" (it's in the CM10 Alpha 7 init.d) so i just rename the 2 file(just example) to "00banner.disabled" and "90userinit.disabled" and then reboot???
sorry pep, just want to make me sure.
thank u pep,
terima kasih
matur nuwun
Click to expand...
Click to collapse
Yup. Also, remember to wipe cache and Dalvik cache. And Fix Permissions.
Sent from my GT-I8150 using xda app-developers app

pepoluan said:
Yup. Also, remember to wipe cache and Dalvik cache. And Fix Permissions.
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
sorry pep, it didn't work.
after install rom, wipe cache n dalvik, reboot, and blank screen.
reboot recovery, rename file under init.d, wipe cache and dalvik success.
fix permissions failed , because "failed because format system"mayb... owh I forget..
reboot system and still the same.

pepoluan said:
AFAIK, CWM has no file manager, unlike TWRP...
That's why I prefer TWRP instead of CWM now. It's much more functional.
Sent from my GT-I8150 using xda app-developers app
---------- Post added at 06:38 PM ---------- Previous post was at 06:36 PM ----------
Arco's latest kernel introduced a new driver, which needs changes in the ROM. Older ROMs won't work with the latest kernel, and vice versa.
Perhaps your kernel cooker hasn't integrated Arco's fix yet? Try asking the kernel maker...
Edit: That's why I refrain from flashing CM9RC7... @hadidjapri is busy with his finals, and Yoon.kernel Chronos is not compatible with CM9RC7...
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
hmm.. yeah i think its not compatible.. but now i change my kernel again.. hehe..
thx pep..