Related
Hi!
I'm an owner of the HTC One X and I'm also a clean freak!
I noticed that the back marks really easily and the only way of cleaning it I have found so far is to use window cleaner, but I'm worried it will damage the material. Does anybody have any ideas?
Also, dust and dirt get into the gaps between the screen and the bezel, as well as inside the front facing camera. Once again, any ideas?
I'd be happy to hear any suggestions or any other troubles people have had cleaning it.
Thank you!
ORStoner said:
Also, dust and dirt get into the gaps between the screen and the bezel, as well as inside the front facing camera. Once again, any ideas?
Click to expand...
Click to collapse
I used some post-it notes and carefully cleaned out the dust. If anything gets stick in the speaker holes then you can use the sticky part of a post-it to remove it.
Don't go nuts though and really jam in the paper as you might get it stuck then tear it or you may push dust further into the phone.
There is a paper tape. It is very good suction dust >>> People still use it to suck the dust particles remaining on the screen before applying the protective sheet.
I think the measures are very good so you can remove dust in crevices on your device.
Thanks, it works!
The problem is I used a pin before and I think I've pushed a lot in too far.
I guess I messed up.
What colour phone do you have?
Sent from my HTC One X using Tapatalk 2
I have been using "Pledge clean and dust multi-surface Original" for a couple of years to clean my notebook including the screen and and other electronics including my mobile phones it works great, also it cheap to buy, just make sure you spay a small amount onto a cloth and not on the item to be cleaned.
It says it for metal, electronic, glass and wood on the can.
http://www.ocado.com/product/50112011
John.
jameslfc5 said:
What colour phone do you have?
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
I have the Grey version.
ORStoner said:
I have the Grey version.
Click to expand...
Click to collapse
Can you please make some photos of the marks and tell how scratch prone is the phone.
I'm thinking if airbrushing some speckles into my white One X so that if it does get dirty, you wont be able to tell!!!
Reckless187 said:
I'm thinking if airbrushing some speckles into my white One X so that if it does get dirty, you wont be able to tell!!!
Click to expand...
Click to collapse
I think an airbrushed one x would look amazing actually . I hope someone is crazy enough to do it
Idk but this product pop out my mind when I saw this thread cyber clean
ORStoner said:
I noticed that the back marks really easily and the only way of cleaning it I have found so far is to use window cleaner, but I'm worried it will damage the material. Does anybody have any ideas?
Click to expand...
Click to collapse
You could test it by spraying some on an old junk CD/DVD that you don't want. The One X case is polycarbonate and so are CDs/DVDs. The exact recipe of polycarbonate isn't going to be the same but if the cleaner damages the CD/DVD then it isn't going to be a good idea to try it on the One X.
for daily cleaning the DHD official case with microfiber internals is doing wonders
sadly a little bit of the phone remains out of it like 5-10%
I got the white one x and typically use just water and microfiber cloth. If water doesn't do the trick I use eye glass solution. Seems to work fine.
Sent from my HTC One X using XDA
I have the white HTC One X, and I work building and fitting sheds and gates ( so a lot of dirt ). I picked up my phone after a days work and the back just got covered in dirt finger prints/smudges, and i know this sounds ridiculous, but the next day they were all gone and the phone was as clean as new... Thanks HTC for the self cleaning phone
ORStoner said:
Hi!
I'm an owner of the HTC One X and I'm also a clean freak!
I noticed that the back marks really easily and the only way of cleaning it I have found so far is to use window cleaner, but I'm worried it will damage the material. Does anybody have any ideas?
Also, dust and dirt get into the gaps between the screen and the bezel, as well as inside the front facing camera. Once again, any ideas?
I'd be happy to hear any suggestions or any other troubles people have had cleaning it.
Thank you!
Click to expand...
Click to collapse
Try using 3M lint remover.
Sent from my HTC One X using xda premium
wayne56 said:
I have the white HTC One X, and I work building and fitting sheds and gates ( so a lot of dirt ). I picked up my phone after a days work and the back just got covered in dirt finger prints/smudges, and i know this sounds ridiculous, but the next day they were all gone and the phone was as clean as new... Thanks HTC for the self cleaning phone
Click to expand...
Click to collapse
and there goes my worries about getting the white one because it might get dirty very quickly
zekit said:
and there goes my worries about getting the white one because it might get dirty very quickly
Click to expand...
Click to collapse
The only time I have noticed it got dirty was the first time taking it into work, once it 'self cleaned' it has never had dirt smudges on it since ( not from memory anyway), strange I know, I'm not mad...
OP, Google a product called Cyber Clean. It's similar to silly puddy. You smear it on your phone. Once you remove the goo, it picks up most of the hard to reach dust particles. You can get it at most computer stores.
Sent from my HTC Desire using Tapatalk 2
I was using some liquid eyeglass cleaner on my screen and some must have leaked in to the display. A dark grey blob started from the left of the display and gradually began moving toward the center, shrinking as it made its way across the screen. It ended up disappearing overnight and there's no sign that it was ever there. Moral of the story? 1) Be careful with liquid cleaners and 2) the display's not entirely or well sealed.
I noticed today that just above the bottom end of the volume rocker, between that and where the screen sits, there was a slight, sharp bump in the polycarbonate. I have managed to smooth it out some what by gently shaving it down with a sharp blade.
So i was wondering, Has anyone else noticed any defects in the casing. Things like sharp ridges, bumps or burr's?
I've not noticed anything on my phone but somebody else on this forum did have one where there was a very thin crack or molding line on one of the corners. They had it replaced IIRC.
My first one had a couple of "air bubbles" in the casing. They were very small. There was also a dark dot on the white surface on the back. I didn't swap the unit out for this..it had other problems.
The one I have now seems to be free of defects. But I did read other reports with similar things.
Perfection....not!
OK, so I'm not the only one. I guess i do have the plus side of i didn't get a white one so if there is any marks on the casing they won't show up as easily.
M3PH said:
I noticed today that just above the bottom end of the volume rocker, between that and where the screen sits, there was a slight, sharp bump in the polycarbonate. I have managed to smooth it out some what by gently shaving it down with a sharp blade.
So i was wondering, Has anyone else noticed any defects in the casing. Things like sharp ridges, bumps or burr's?
Click to expand...
Click to collapse
I have a sharp bump/ imperfection on right below the microUSB slot. Good thing its virtually invisible unless you look for it.
Sent from my HTC One X using Tapatalk 2
bimmerboii said:
I have a sharp bump/ imperfection on right below the microUSB slot. Good thing its virtually invisible unless you look for it.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
I only noticed the one i had because my finger brsuhed over it. I would guess it's a burr from the molding process but then it would be in the same place on every device. Although if there are different molds for the grey/black and white ones then it may just be what i suspect.
As i said in an earlier post, you can get rid of it by using a sharp blade and running of it the bump gently a couple of times to shave it down
Could you post some pictures?
Sent from my HTC One X using XDA
mzaza said:
Could you post some pictures?
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
I would but it doesn't show up so there isn't much point.
Wont it show up in proper lightning angle?
I have on the back a small line which you can see only when holding the phone in proper lightning angle. It's hard to see, I had the phone for 15 days but I just noticed it today.
Sent from my HTC One X using XDA
It's on the opposite side to the dock pins.
Sent from my HTC One X using XDA
mzaza said:
Wont it show up in proper lightning angle?
I have on the back a small line which you can see only when holding the phone in proper lightning angle. It's hard to see, I had the phone for 15 days but I just noticed it today.
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
Nope. I was taking some shots of it today for a review i've done for installornot.com (link in my sig) and it just didn't show up.
But i can describe it as left over from plastic from an injection moulding process. You know how when plastic is injection moulded it leaves a sort of spike where the plastic was injected into the mould. It was exactly like that.
Ah! I've got that too plus the one in the opposite side of the dock I was explaining in the previous post.
Has any one found the same problem, the line on the back?
EDIT: I think it's the borders of the battery because I can see similar lines in proper lightning around the dock pins.
Sent from my HTC One X using XDA
I've found two small defects on the polycarbonate body: one near the 3.5mm jack plug, like a small imperfection such as if the body was hit by something thin like a blade, and another one almost invisible on the left side.. Oh, there is also a very little gray dot on the bottom, but this is really invisible to the most people
mzaza said:
Ah! I've got that too plus the one in the opposite side of the dock I was explaining in the previous post.
Has any one found the same problem, the line on the back?
EDIT: I think it's the borders of the battery because I can see similar lines in proper lightning around the dock pins.
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
The moulding of these cases is really not all that precise but also partly due to the fact that the casing is heated to "glue" bits of plastic and components to the inside back of the case.
I have seen on the white version if you hold it under a spot light and look along its length so you can clearly see the matte mottled effect on the back...then slowly tip the phone back and forth and you will see two horizontal lines running left to right. One a bit above the HTC logo, and one near the speaker grill. It roughly conforms to where the battery is. I also notice that for the line above the HTC logo, towards the right, the moulding dips in ever so slightly. ONce again looking at the inside back, there is some kind of component fixed there. So the cases are just not that precise I'm afraid. Check some of the teardown pictures so you can see the inside of the back casing and you will understand what I mean. It is not just a shell, but an intricate moulding of internal bits as well.
When I first noticed this I was worried if the polycarbonate case was melting due to the heat in the phone. But I googled and found that polycarbonate doesn't start becoming soft until at least 130 degrees C, so it isn't going to be melting!
Your post made me feel better now
jonstatt said:
The moulding of these cases is really not all that precise but also partly due to the fact that the casing is heated to "glue" bits of plastic and components to the inside back of the case.
I have seen on the white version if you hold it under a spot light and look along its length so you can clearly see the matte mottled effect on the back...then slowly tip the phone back and forth and you will see two horizontal lines running left to right. One a bit above the HTC logo, and one near the speaker grill. It roughly conforms to where the battery is. I also notice that for the line above the HTC logo, towards the right, the moulding dips in ever so slightly. ONce again looking at the inside back, there is some kind of component fixed there. So the cases are just not that precise I'm afraid. Check some of the teardown pictures so you can see the inside of the back casing and you will understand what I mean. It is not just a shell, but an intricate moulding of internal bits as well.
When I first noticed this I was worried if the polycarbonate case was melting due to the heat in the phone. But I googled and found that polycarbonate doesn't start becoming soft until at least 130 degrees C, so it isn't going to be melting!
Click to expand...
Click to collapse
Good work there lad.
I know there are forums out there that talks about painting the Nexus Housing, but I want instructions that shows that the paint won't rub off, chip, and crack.
Have anyone found instructions that has flawless results that last if done right???
Doubt you'll find such a guarantee as nothing lasts for ever.....
SysAdmNj said:
Doubt you'll find such a guarantee as nothing lasts for ever.....
Click to expand...
Click to collapse
True. But I didn't say forever. I said that last.
And by last I mean at least a year. Ice only dropped the phone once between my 7 months. So I'm pretty confident I won't drop it again.
Dragn4rce said:
I know there are forums out there that talks about painting the Nexus Housing, but I want instructions that shows that the paint won't rub off, chip, and crack.
Have anyone found instructions that has flawless results that last if done right???
Click to expand...
Click to collapse
Mask properly.
Sand liberally, but not abusively.
Primer optional.
Paint lightly to prevent running.
Multiple layers. Let set in between.
Allow plenty of time to dry.
Use a dust free environment. I recommend rigging a couple CPU fans near it pointing away.
Sent from my Galaxy Nexus using xda premium
Jubomime said:
Mask properly.
Sand liberally, but not abusively.
Primer optional.
Paint lightly to prevent running.
Multiple layers. Let set in between.
Allow plenty of time to dry.
Use a dust free environment. I recommend rigging a couple CPU fans near it pointing away.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
You forgot the oven bake drying or somethin...
Jubomime said:
Mask properly.
Sand liberally, but not abusively.
Primer optional.
Paint lightly to prevent running.
Multiple layers. Let set in between.
Allow plenty of time to dry.
Use a dust free environment. I recommend rigging a couple CPU fans near it pointing away.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
What brand of paint so you recommend for this job???
Don't say of my choosing. I want ur opinion of what would do well for this kind of use.
SysAdmNj said:
You forgot the oven bake drying or somethin...
Click to expand...
Click to collapse
That step is that between which one???
You can also use a paint that has the primer built in but again it is optional. Its not like your painting an orange wall white . Anyways I did I used rustoleum also the key is to LET IT DRY between applications. And do not do multiple applications because it will take forever to dry and u do not have forever as u need ur phone. Beside u only need 4 to 5 light coats. Distribute evenly good luck
sarni84 said:
You can also use a paint that has the primer built in but again it is optional. Its not like your painting an orange wall white . Anyways I did I used rustoleum also the key is to LET IT DRY between applications. And do not do multiple applications because it will take forever to dry and u do not have forever as u need ur phone. Beside u only need 4 to 5 light coats. Distribute evenly good luck
Click to expand...
Click to collapse
Thanks.
So you've painted ur phone??? How is it holding up??? And how long have it been???
My dad keeps saying I'm gonna fu×k up and that it will chip no matter what and I'm like, "challenge accepted.:sly:"
A chip is a chip.. but how bad it looks after the chip will depend on how thick the paint is. Considering the material you're painting, I would go with a paint specific for plastics. Try a hobby store that has a good model car section.
Sent from my Galaxy Nexus using xda premium
But to be perfectly honest, if you're asking us for painting advice then you probably aren't pro. That means there's a good chance your dad is right. My advice is don't do it. But if you do, mask the **** out of it.
Sent from my Galaxy Nexus using xda premium
Don't listen to him (your dad) and so far no chips and everything looks good its been about 3 weeks also. Anyways be careful when taking volume and power rockers off they are easy tho and for the gold pogo pins there is a black bar that goes over them work on each end and pry the bar up it will have a hole on each end. Then when the black bar is off u will see three individual pogo pins u have to stick something against them from outside (like pushing them inward) then they will fallout out. Tape off everything that is important. And remember this will prolly void your warranty so u should grab an extra grey housing and battery cover (if u decide to paint that). I personally am getting the white housing and white battery door I get bored quick
Jubomime said:
A chip is a chip.. but how bad it looks after the chip will depend on how thick the paint is. Considering the material you're painting, I would go with a paint specific for plastics. Try a hobby store that has a good model car section.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Alright. Thanks for that.
I have a dumb question, how come the paint doesn't chip of a car easily if you paint a fiber glass part.
My dad has a bumper and it came white and got it painted black and not a single chip.
sarni84 said:
Don't listen to him (your dad) and so far no chips and everything looks good its been about 3 weeks also. Anyways be careful when taking volume and power rockers off they are easy tho and for the gold pogo pins there is a black bar that goes over them work on each end and pry the bar up it will have a hole on each end. Then when the black bar is off u will see three individual pogo pins u have to stick something against them from outside (like pushing them inward) then they will fallout out. Tape off everything that is important. And remember this will prolly void your warranty so u should grab an extra grey housing and battery cover (if u decide to paint that). I personally am getting the white housing and white battery door I get bored quick
Click to expand...
Click to collapse
Yeah I'm gonna buy a new one before doing this and use the old one as my test since it has dings and scratches on it.
sarni84 said:
I personally am getting the white housing and white battery door I get bored quick
Click to expand...
Click to collapse
I have the Verizon i515 version.
The only thing available is the white door.
Damn those sellers!!!!! Selling stuff half way.
Vinyl dye bonds directly to plastic, dries in minutes, and won't chip or scratch away. Just 2-3 light coats is all you need for good coverage. The only limitation is that you don't have much choice in the color or finishes.
earlyberd said:
Vinyl dye bonds directly to plastic, dries in minutes, and won't chip or scratch away. Just 2-3 light coats is all you need for good coverage. The only limitation is that you don't have much choice in the color or finishes.
Click to expand...
Click to collapse
Love that word. Bond.
Jubomime said:
But to be perfectly honest, if you're asking us for painting advice then you probably aren't pro. That means there's a good chance your dad is right. My advice is don't do it. But if you do, mask the **** out of it.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I know how to paint.
Just don't know what to do with a housing that gonna be rubbed against my skin and pants.
Dragn4rce said:
Love that word. Bond.
Click to expand...
Click to collapse
It's a good word for what vinyl dye does. I've been using it for years when painting game controllers and have never had it wear off.
Somehow my younger nephew got hold of my phone and thought it would be funny to use a dirty rubber on the back of it. Luckily I caught him in the act just in time before he done more damage to it and now my phone has a medium sized patch thats quite dark and noticible. While its not a major problem its kinda spoilt the beautiful finish of the back of HOX. I tried using a damp cloth and scrubbing real hard to get rid of it but it didnt make the slightest difference. Is there any way I can get rid of it and bring it back to the normal look or am I stuck with this? Attached a photo to give you a better idea of what it looks like, it actually doesnt look that bad in the picture but trust me its alot worse.
Try a bit of CIF mate, I heard that works.
Be careful!
Try using a clean rubber ??
Wilks3y said:
Try a bit of CIF mate, I heard that works.
Be careful!
Click to expand...
Click to collapse
chaun1308 said:
Try using a clean rubber ??
Click to expand...
Click to collapse
Tried both these suggestions, neither worked
I have no idea what can you do at this situation d ... I'd probably use a damp cloth but since it didn't work .... >.< Buy a case for it if you don't want the patch to be seen or , this might be nuts but use paint thinner LOL
Why was he humping your phone?
Sent from my AT100 using xda premium
DharmzVala said:
Tried both these suggestions, neither worked
Click to expand...
Click to collapse
a brand new backing is around sixty bucks, just change it
Sent from my HTC One X using Tapatalk 2
What is dirty rubber? Was it something like one of those hard abrasive ink erasers? If it was one of those then most probably that area is worn off. Probably nothing much you can do except change the entire case, or you could try to rub the rest of the surface with the same thing to give it a uniform look . I did something similar with one of my old Siemens phones, it had a painted back which was fading away due to normal wear, so I took a very soft sandpaper and sanded away all the paint to give it a nice uniform matte black finish. It turned out pretty good considering how it looked before .
PhoenixFx said:
What is dirty rubber? Was it something like one of those hard abrasive ink erasers? If it was one of those then most probably that area is worn off. Probably nothing much you can do except change the entire case, or you could try to rub the rest of the surface with the same thing to give it a uniform look . I did something similar with one of my old Siemens phones, it had a painted back which was fading away due to normal wear, so I took a very soft sandpaper and sanded away all the paint to give it a nice uniform matte black finish. It turned out pretty good considering how it looked before .
Click to expand...
Click to collapse
i think the english call erasers rubber.
Sent from my HTC One X using Tapatalk 2
I'd try some lens cleaner spray and a lens cloth. It my be like the finger prints that become hard to get off. I lens cleaner has really helped me
Sent from my One X using xda premium
ruffdogtechy said:
I'd try some lens cleaner spray and a lens cloth. It my be like the finger prints that become hard to get off. I lens cleaner has really helped me
Sent from my One X using xda premium
Click to expand...
Click to collapse
Lens cleaner is generally just very pure Isopropyl alcohol
Nevermind guys i just decided to buy a case and use that lol.
Try hair spray. It's the best solvent...
Just a bit on a rag and wipe the back before it's getting dry.
So I'm thinking of upgrading and I just had a few questions about the m8 I can't find through a giggle search.
1. Did HTC fix the purple tint issue with the camera? I don't feel like sending my phone in for a replacement every 6 months for the camera module.
2. The m7 is known for running pretty hot, is the m8 any better?
Sent from my HTC One using XDA Premium 4 mobile app
jukiewalsh said:
So I'm thinking of upgrading and I just had a few questions about the m8 I can't find through a giggle search.
1. Did HTC fix the purple tint issue with the camera? I don't feel like sending my phone in for a replacement every 6 months for the camera module.
2. The m7 is known for running pretty hot, is the m8 any better?
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I upgraded from a m7. I never experienced the purple tint issue on my m7. But I'm not the most avid photographer.
As far as heat, again didn't notice much heat on my m7. My m8 stays petty cool.
Heisenberg420 said:
I upgraded from a m7. I never experienced the purple tint issue on my m7. But I'm not the most avid photographer.
As far as heat, again didn't notice much heat on my m7. My m8 stays petty cool.
Click to expand...
Click to collapse
http://forums.androidcentral.com/ht...inny-infamous-purple-tint-thermal-defect.html read that article and it was also constantly on the m7 q&a threads. As for the temperature I don't understand how you never noticed it because it too is a fairly common issue that happens for some regardless of what task is being done but especially when playing games or watching videos. I don't mean some unbearable heat that burns you but it's significantly hotter than other phones in comparison.
Can someone who maybe experienced this give some info? I tried searching around but can't find much info on the heat or whether or not htc did anything to fix the camera this time around.
Well just thought I'd share my experience as I've used both phones.
What exactly are you doing that's causing heat? The only time I notice significant heat is when watching hd video for a long time, or after flashing a ROM, both normal conditions that cause heat. I also noticed on my m7 after listening to Pandora for a while it got warm which is a little odd, maybe something to do with the powerful speakers. Receiving large amounts of data over LTE also causes heat.
Keep in mind these phones are 80% aluminum (90% on the m8) which holds heat more so than plastic or polycarbonate.
There is no purple tint issue with this phone. I know how frustrating that was because I had two M7 that had to have service because of it.
The phone can get warm but I don't see it as an issue. When doing demanding stuff it can get hot but most phones do. And you have to take into account like someone else said it's an aluminum phone and it's bound to get hotter than plastic. It will absorb the heat more. I've never had my phone so hot that it bothers me though.
Heisenberg420 said:
Keep in mind these phones are 80% aluminum (90% on the m8) which holds heat more so than plastic or polycarbonate.
Click to expand...
Click to collapse
I never really thought about that fact, thanks for the input!
dannejanne said:
There is no purple tint issue with this phone. I know how frustrating that was because I had two M7 that had to have service because of it.
The phone can get warm but I don't see it as an issue. When doing demanding stuff it can get hot but most phones do. And you have to take into account like someone else said it's an aluminum phone and it's bound to get hotter than plastic. It will absorb the heat more. I've never had my phone so hot that it bothers me though.
Click to expand...
Click to collapse
Okay great, that was my main concern. As for the heat it never really bothered me its just something I noticed that I wondered maybe was changed.
Sent from my HTC One using XDA Premium 4 mobile app
dannejanne said:
There is no purple tint issue with this phone. I know how frustrating that was because I had two M7 that had to have service because of it.
The phone can get warm but I don't see it as an issue. When doing demanding stuff it can get hot but most phones do. And you have to take into account like someone else said it's an aluminum phone and it's bound to get hotter than plastic. It will absorb the heat more. I've never had my phone so hot that it bothers me though.
Click to expand...
Click to collapse
It doesn't absorb it more. It dissipates it faster thus releases it faster and more efficiently. Plastic absorbs the heat.
If you'll notice anandtech's comparison of the m8 vs gs5 the gs5 benches a little better in the quick benchmarks but the m8 does better in the longer benchmarks and has much better frames per second because it doesn't have to throttle as much because the aluminum allows the heat to escape quicker. If you use a plastic case that covers the back of the m8 it will mitigatesome of that advantage because some of the heat will be trapped in between the aluminum and plastic not mention the little bit of air of which air doesn't conduct heat very well either.
sent from my HTC One M8 using hofo mobile app