I know there are forums out there that talks about painting the Nexus Housing, but I want instructions that shows that the paint won't rub off, chip, and crack.
Have anyone found instructions that has flawless results that last if done right???
Doubt you'll find such a guarantee as nothing lasts for ever.....
SysAdmNj said:
Doubt you'll find such a guarantee as nothing lasts for ever.....
Click to expand...
Click to collapse
True. But I didn't say forever. I said that last.
And by last I mean at least a year. Ice only dropped the phone once between my 7 months. So I'm pretty confident I won't drop it again.
Dragn4rce said:
I know there are forums out there that talks about painting the Nexus Housing, but I want instructions that shows that the paint won't rub off, chip, and crack.
Have anyone found instructions that has flawless results that last if done right???
Click to expand...
Click to collapse
Mask properly.
Sand liberally, but not abusively.
Primer optional.
Paint lightly to prevent running.
Multiple layers. Let set in between.
Allow plenty of time to dry.
Use a dust free environment. I recommend rigging a couple CPU fans near it pointing away.
Sent from my Galaxy Nexus using xda premium
Jubomime said:
Mask properly.
Sand liberally, but not abusively.
Primer optional.
Paint lightly to prevent running.
Multiple layers. Let set in between.
Allow plenty of time to dry.
Use a dust free environment. I recommend rigging a couple CPU fans near it pointing away.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
You forgot the oven bake drying or somethin...
Jubomime said:
Mask properly.
Sand liberally, but not abusively.
Primer optional.
Paint lightly to prevent running.
Multiple layers. Let set in between.
Allow plenty of time to dry.
Use a dust free environment. I recommend rigging a couple CPU fans near it pointing away.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
What brand of paint so you recommend for this job???
Don't say of my choosing. I want ur opinion of what would do well for this kind of use.
SysAdmNj said:
You forgot the oven bake drying or somethin...
Click to expand...
Click to collapse
That step is that between which one???
You can also use a paint that has the primer built in but again it is optional. Its not like your painting an orange wall white . Anyways I did I used rustoleum also the key is to LET IT DRY between applications. And do not do multiple applications because it will take forever to dry and u do not have forever as u need ur phone. Beside u only need 4 to 5 light coats. Distribute evenly good luck
sarni84 said:
You can also use a paint that has the primer built in but again it is optional. Its not like your painting an orange wall white . Anyways I did I used rustoleum also the key is to LET IT DRY between applications. And do not do multiple applications because it will take forever to dry and u do not have forever as u need ur phone. Beside u only need 4 to 5 light coats. Distribute evenly good luck
Click to expand...
Click to collapse
Thanks.
So you've painted ur phone??? How is it holding up??? And how long have it been???
My dad keeps saying I'm gonna fu×k up and that it will chip no matter what and I'm like, "challenge accepted.:sly:"
A chip is a chip.. but how bad it looks after the chip will depend on how thick the paint is. Considering the material you're painting, I would go with a paint specific for plastics. Try a hobby store that has a good model car section.
Sent from my Galaxy Nexus using xda premium
But to be perfectly honest, if you're asking us for painting advice then you probably aren't pro. That means there's a good chance your dad is right. My advice is don't do it. But if you do, mask the **** out of it.
Sent from my Galaxy Nexus using xda premium
Don't listen to him (your dad) and so far no chips and everything looks good its been about 3 weeks also. Anyways be careful when taking volume and power rockers off they are easy tho and for the gold pogo pins there is a black bar that goes over them work on each end and pry the bar up it will have a hole on each end. Then when the black bar is off u will see three individual pogo pins u have to stick something against them from outside (like pushing them inward) then they will fallout out. Tape off everything that is important. And remember this will prolly void your warranty so u should grab an extra grey housing and battery cover (if u decide to paint that). I personally am getting the white housing and white battery door I get bored quick
Jubomime said:
A chip is a chip.. but how bad it looks after the chip will depend on how thick the paint is. Considering the material you're painting, I would go with a paint specific for plastics. Try a hobby store that has a good model car section.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Alright. Thanks for that.
I have a dumb question, how come the paint doesn't chip of a car easily if you paint a fiber glass part.
My dad has a bumper and it came white and got it painted black and not a single chip.
sarni84 said:
Don't listen to him (your dad) and so far no chips and everything looks good its been about 3 weeks also. Anyways be careful when taking volume and power rockers off they are easy tho and for the gold pogo pins there is a black bar that goes over them work on each end and pry the bar up it will have a hole on each end. Then when the black bar is off u will see three individual pogo pins u have to stick something against them from outside (like pushing them inward) then they will fallout out. Tape off everything that is important. And remember this will prolly void your warranty so u should grab an extra grey housing and battery cover (if u decide to paint that). I personally am getting the white housing and white battery door I get bored quick
Click to expand...
Click to collapse
Yeah I'm gonna buy a new one before doing this and use the old one as my test since it has dings and scratches on it.
sarni84 said:
I personally am getting the white housing and white battery door I get bored quick
Click to expand...
Click to collapse
I have the Verizon i515 version.
The only thing available is the white door.
Damn those sellers!!!!! Selling stuff half way.
Vinyl dye bonds directly to plastic, dries in minutes, and won't chip or scratch away. Just 2-3 light coats is all you need for good coverage. The only limitation is that you don't have much choice in the color or finishes.
earlyberd said:
Vinyl dye bonds directly to plastic, dries in minutes, and won't chip or scratch away. Just 2-3 light coats is all you need for good coverage. The only limitation is that you don't have much choice in the color or finishes.
Click to expand...
Click to collapse
Love that word. Bond.
Jubomime said:
But to be perfectly honest, if you're asking us for painting advice then you probably aren't pro. That means there's a good chance your dad is right. My advice is don't do it. But if you do, mask the **** out of it.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I know how to paint.
Just don't know what to do with a housing that gonna be rubbed against my skin and pants.
Dragn4rce said:
Love that word. Bond.
Click to expand...
Click to collapse
It's a good word for what vinyl dye does. I've been using it for years when painting game controllers and have never had it wear off.
Related
Hey,
This probably sounds a little dumb but for anyone who likes to keep their screen really clean if you use a dried out baby wipe it works just as good as a micro fibre cloth. Just thought I would share as I did it last night and it saved me buying a cloth.
That does work very well indeed!
Sent from my Galaxy Nexus using xda premium
How does this compare to licking the screen and wiping on shirt/pants (user preference)?
On a scale of 1 to 10 please.
LTE EX Galaxy Nexus - AOSP KANG
Asus Transformer - 3.2.1 OC/UV
Personally, I prefer 80 grit.
Sent from my Nexus in Texas.
Good to know, as I have a few of those lying around from time to time... (1 year old likes to pull wipes out of bag and let them dry )
i just use my shirt and my breath haha
I'd like to know the most effective way of cleaning in the crack between the outside housing of the phone and the screen. I have a little bit of stuff in there and that damn gap is so small.
spencer88 said:
I'd like to know the most effective way of cleaning in the crack between the outside housing of the phone and the screen. I have a little bit of stuff in there and that damn gap is so small.
Click to expand...
Click to collapse
what i do is use compressed air.
if it is in there tight i just use the corner of a piece of paper and run it out.
predation said:
what i do is use compressed air.
if it is in there tight i just use the corner of a piece of paper and run it out.
Click to expand...
Click to collapse
Thanks for this.
spencer88 said:
I'd like to know the most effective way of cleaning in the crack between the outside housing of the phone and the screen. I have a little bit of stuff in there and that damn gap is so small.
Click to expand...
Click to collapse
I just tear the corner of a magazine cover off. Gets deeper than compressed air. Accidentally put my phone in the same pocket as my cigarettes and had pieces of tobacco lining the phone. Magazine cover worked perfectly
Sent from my Galaxy Nexus
I am ordering a new genuine OEM T-989 enclosure. I have seen a lot of people replace the screen digitizer combination. I have not seen any body remove the digitizer and screen from the bezel and mid frame.
Has anybody done this?
Does anybody have any information on this?
Any help would be greatly appreciated.
Sent from my SGH-T989 using Tapatalk 2
shnn2011 said:
I am ordering a new genuine OEM T-989 enclosure. I have seen a lot of people replace the screen digitizer combination. I have not seen any body remove the digitizer and screen from the bezel and mid frame.
Has anybody done this?
Does anybody have any information on this?
Any help would be greatly appreciated.
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
I was going to do this till I see how difficult it is. It is almost impossible to separate the bezel from the digitizer with out breaking the screen. YouTube it.
Sent from my Galaxy SII T-mobile using xda premium
yeislak said:
I was going to do this till I see how difficult it is. It is almost impossible to separate the bezel from the digitizer with out breaking the screen. YouTube it.
Sent from my Galaxy SII T-mobile using xda premium
Click to expand...
Click to collapse
not true, all you need is a heat gun/blow dryer and a steady hand + a pry tool.
KillaHurtz said:
not true, all you need is a heat gun/blow dryer and a steady hand + a pry tool.
Click to expand...
Click to collapse
Any advice on temperature settings and adhesive replacement / pry tool?
Sent from my SGH-T989 using Tapatalk 2
I got sand paper and took all the chrome off the bezel. Come to find out the plastic is a matte black. Looks sick and my phone doesn't look like crap anymore. Looks brand new. Will post pics later if interested.
Sent from my AOKP-T989 using xda premium
yeislak said:
I got sand paper and took all the chrome off the bezel. Come to find out the plastic is a matte black. Looks sick and my phone doesn't look like crap anymore. Looks brand new. Will post pics later if interested.
Sent from my AOKP-T989 using xda premium
Click to expand...
Click to collapse
What grain sand paper did you use? And any special technique in the sanding process?
Ayodeji13 said:
What grain sand paper did you use? And any special technique in the sanding process?
Click to expand...
Click to collapse
P600 I believe. I know it was 600 tho. And no technique I didn't even take the phone apart. I took the battery door off and make sure you have a screen protector on so you don't f up your ****. Just rub he paper hard on the bezel don't be afraid. It will take about 30 to 45 min maybe an hour with breaks cus your fingers will start to burn. Use a gloves they'll help.
Sent from my AOKP-T989 using xda premium
I'm at the doctors when I get out I'll put up some pics so you can see what it looks like before you do it. Also be careful you don't get to much the dusted paint in any port.
Sent from my AOKP-T989 using xda premium
here you go
I have been thinking that if it is impossible, could you not just sand off the bezel, then Dremel out the inside screen mount of the new frame and finally epoxy the new bezel where the old bezel used to reside with plastic epoxy?
I asked some expert phone repair guys at the CPR Cell Phone Repair franchise; and they said that the screen will never ever ever ever come off unless you are either a machine or really good. They stated that they would not be able to guaranty the screens safety especially considering the heat involved.
If it is done by Samsung at all without replacing the entire digitizer and screen combo I would assume they use some kind of vacuum suction cup to pull off the screen after the proper amount of heat is applied.
Or, we could just paying Samsung the quoted 100 dollars to have it done.
This is non warranty work, so does anyone think they will mind if the phone is rooted?
Here is where you can order parts.
I don't know if they are genuine.
http://www.parts4repair.com/samsung-galaxy-s-ii-t989/
shnn2011 said:
I have been thinking that if it is impossible, could you not just sand off the bezel, then Dremel out the inside screen mount of the new frame and finally epoxy the new bezel where the old bezel used to reside with plastic epoxy?
I asked some expert phone repair guys at the CPR Cell Phone Repair franchise; and they said that the screen will never ever ever ever come off unless you are either a machine or really good. They stated that they would not be able to guaranty the screens safety especially considering the heat involved.
If it is done by Samsung at all without replacing the entire digitizer and screen combo I would assume they use some kind of vacuum suction cup to pull off the screen after the proper amount of heat is applied.
Or, we could just paying Samsung the quoted 100 dollars to have it done.
This is non warranty work, so does anyone think they will mind if the phone is rooted?
Click to expand...
Click to collapse
The pictures above you post is what I did to my phone. I sanded the bezel without even taking it apart.
Sent from my SGH-T989 using xda premium
The Bezel is part of the frame I believe. I would bet allot of money you can't get the screen of without cracking the digitizer. But, heat the top and bottom, that is where the greatest concentration of adhesive is. And watch the ribbon to the capacitive buttons because they will be stuck to the screen. You will have to disconnect them.
Sent from my SGH-T989D using xda premium
yeislak said:
here you go
Click to expand...
Click to collapse
That looks pretty cool dude. I have a question for you tho. How did you set the DPI so high? Your icons are small and thats how I want mine to be except whenever I use the DPI app from the market, it causes problems with parts of the ROM. For example the google search bar will only go halfway across the screen.
yeislak said:
here you go
Click to expand...
Click to collapse
That looks badass. Wanna do it to mine since you in Miami? jk lol
yeislak said:
here you go
Click to expand...
Click to collapse
Is that android bot doing the Hokey Pokey?
The Team Infamous project is up and running. http://www.infamousdevelopers.com
Sent from my SGH-T989 using Tapatalk 2
I just got my replacement about a week ago. I bought this phone used and without the battery door. Scuffs included. Luckily I kept the screen immaculate. None the less now that I have a mint handset and bought a battery door... the T989 sure is a smexy fellow. IMO the best looking Galaxy s2. Too bad we never got the Exynos and had to settle for the much slower s3 SoC. I:-/
Sent from my SAMSUNG-SGH-T989 using xda premium
RushAOZ said:
I just got my replacement about a week ago. I bought this phone used and without the battery door. Scuffs included. Luckily I kept the screen immaculate. None the less now that I have a mint handset and bought a battery door... the T989 sure is a smexy fellow. IMO the best looking Galaxy s2. Too bad we never got the Exynos and had to settle for the much slower s3 SoC. I:-/
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Were running at 1.5 Ghz everyone else is at 1.2Ghz.
Sent from my SGH-T889 using Tapatalk 2
Site back up
The infamous website is back up.
http://www.infamousdevelopers.com
Pretty much all you need in the title. I wanted to know how to do this mainly because it's cheaper then buying a lCD digitizer combo and because I can't find a guide anywhere else. Any tips and tricks on how to do this should be well appreciated and any guides. Thanks in andVance for anyone's help.
Sent from my SAMSUNG-SGH-I747 using xda premium
Backslash10 said:
Pretty much all you need in the title. I wanted to know how to do this mainly because it's cheaper then buying a lCD digitizer combo and because I can't find a guide anywhere else. Any tips and tricks on how to do this should be well appreciated and any guides. Thanks in andVance for anyone's help.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
I also have a cracked the screen, What my search result has come up with is the cost to replace the screen is ~$200CDN. Can you please keep me posted on what path you would be taking, might just follow
Replacing the glass from the actual screen is very hard and would require tons of technical know-how because the two are fused together.
Not recommended, even by experts.
Well I know it's extremely hard but I'm mainly looking for advise about it is all it decently help people out here.
Sent from my SAMSUNG-SGH-I747 using xda premium
Backslash10 said:
Well I know it's extremely hard but I'm mainly looking for advise about it is all it decently help people out here.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
it's not possible to do. period.
Really I thought I could be done but took a lot of waiting and just the right heat and pressure.
Sent from my SAMSUNG-SGH-I747 using xda premium
dLo GSR said:
it's not possible to do. period.
Click to expand...
Click to collapse
Nice
Op
http://forum.xda-developers.com/showthread.php?t=1904554
it is very possible I have done 4 of them already...
http://forum.xda-developers.com/showthread.php?t=1890708
dLo GSR said:
it's not possible to do. period.
Click to expand...
Click to collapse
hahahah.....owned, should really atleast attempt to find out if what you are saying has any evidence to support it, or rebut it
dLo GSR said:
it's not possible to do. period.
Click to expand...
Click to collapse
I've heard its possible, just EXTREMELY difficult to manage.. I wouldn't.
Its entirely possible, as the multiple video's have shown. Although i haven't done it to the SGS3 yet, i will be soon. Cracked my lens the other day, replacement in the mail. I have also changed the screen's on several iphones (at my job) which us a similar method of gluing. It is made to be difficult by design...to keep people from attempting it and opting to send it in for repair. Of course when you do this, through samsung anyways, you are being charged for the entire led assembly and not just the lens.
dntesinfrno said:
Its entirely possible, as the multiple video's have shown. Although i haven't done it to the SGS3 yet, i will be soon. Cracked my lens the other day, replacement in the mail. I have also changed the screen's on several iphones (at my job) which us a similar method of gluing. It is made to be difficult by design...to keep people from attempting it and opting to send it in for repair. Of course when you do this, through samsung anyways, you are being charged for the entire led assembly and not just the lens.
Click to expand...
Click to collapse
Good to hear you did it at your job with iphones. Any idea what glue they use to bond the glass to the digitizer? I have searched and searched and cannot find anything. I have done several S3 so far and this is the one ingredient lacking for a complete repair. In terms of what it feels like while removing the old glue; it seems to be silicone based the way it comes up, you can roll it into little balls, it's is tacky and has that rubbery consistency.
Unfortunately, no idea what adhesive they use. Personally i would attempt what YellowGTO did first and simply heat the existing glue and see how it holds. Normally this should be enough to do the job, as you can imagine the stuff if pretty tacky. Especially if the lens fits as tightly as his in the video, its doubtful it will fall out even with the slightest remaining glue. If for whatever reason there isn't enough to firmly hold the screen in place i've used small dabs of liquid tape where necessary, or the thin 3M double sided tape would work also i suppose. In this case i usually wrap the device in a towel or shirt or whatever you have laying around and set something with some decent weight on top of it, screen side down on a flat surface, overnight to give the adhesive time to setup properly.
dntesinfrno said:
Unfortunately, no idea what adhesive they use. Personally i would attempt what YellowGTO did first and simply heat the existing glue and see how it holds. Normally this should be enough to do the job, as you can imagine the stuff if pretty tacky. Especially if the lens fits as tightly as his in the video, its doubtful it will fall out even with the slightest remaining glue. If for whatever reason there isn't enough to firmly hold the screen in place i've used small dabs of liquid tape where necessary, or the thin 3M double sided tape would work also i suppose. In this case i usually wrap the device in a towel or shirt or whatever you have laying around and set something with some decent weight on top of it, screen side down on a flat surface, overnight to give the adhesive time to setup properly.
Click to expand...
Click to collapse
Sure the outer frame is enough in most cases to hold it on, thats fine. But there is a side effect once all the glue is removed off the digitizer. There will a micro gap between the 2 when the original glue is removed. If you press the new glass hard enough, ( for example cleaning fingerprints like I often do against my shirt ) and it touches the digitizer, the phone freezes. You must then power off the screen, sleep button and then press power again to bring it up and then it will work again. Seems to be a recalibration process going on.
Maybe these 2 posts should be merged and I would certainly read the post below. Much more good info here on the subject...
http://forum.xda-developers.com/showthread.php?p=33056057#post33056057
Yea, i've been following several threads about lens replacement, even before i busted mine (jinxed myself?). I'd much rather have to deal with a 15 second reboot over possibly damaging the LED or worse using an adhesive that may not be transparent. I can live with the air gap, or even the 'invisible' smudges on my personal device...although if i were going to do this for profit obviously that would be unacceptable. 20 dollars and an hour of my time vs 200+ for the whole assembly or 125 for an insurance deductable..i can overlook imprefections . It would be interesting to find out exactly what substance they are using though.
EDIT - Just for SnG's i googled 'mobile screen glue' and this was the first result. http://www.alibaba.com/product-gs/523467689/Optical_Clear_Adhesive_for_touch_screen.html?s=p
While i'm sure its not the only product out there for this purpose, if this is any indication it won't come cheap..
dntesinfrno said:
Yea, i've been following several threads about lens replacement, even before i busted mine (jinxed myself?). I'd much rather have to deal with a 15 second reboot over possibly damaging the LED or worse using an adhesive that may not be transparent. I can live with the air gap, or even the 'invisible' smudges on my personal device...although if i were going to do this for profit obviously that would be unacceptable. 20 dollars and an hour of my time vs 200+ for the whole assembly or 125 for an insurance deductable..i can overlook imprefections . It would be interesting to find out exactly what substance they are using though.
Click to expand...
Click to collapse
Agreed it would be nice to find out what type of glue.
The phone breaks so easy i am surprised I have not heard of a Class Action Lawsuit... :silly:
here are instructions on replacing just the glass/screen
[HOW TO] [TUTORIAL] S3 Replace Cracked Glass Screen w/ YouTube Video
i replaced my screen took me about 50 mins with 2 people
XeoNoX said:
here are instructions on replacing just the glass/screen
[HOW TO] [TUTORIAL] S3 Replace Cracked Glass Screen w/ YouTube Video
i replaced my screen took me about 50 mins with 2 people
Click to expand...
Click to collapse
Very very nice!! :thumbup::thumbup:
Sent from my SCH-I535 using xda app-developers app
marcustaz said:
Very very nice!! :thumbup::thumbup:
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
JUst did an even EASIER replacement for a cracked camera lens. I purchased this part from ebay :
http://www.ebay.com/itm/Blue-Housin.../271099346918?ssPageName=ADME:L:eek:C:US:3160
1) Turn phone off
2) Take off battery cover
3) Remove battery, SIM card, and SD Card
4) remove about 8 screws to remove the middle back place.
5) Remove middle back place carefully (There are still tabs holding it secure)
6) Place new middle back in place
7) Screw down
8) Replace battery, SIM card, and SD card
9) Replace battery cover
10) Power up phone!!
Took all of 10 minutes total. Flawless fix on my AT&T Samsung Galaxy S 3
Gentlemen and OP please update your original post to include this video. This is NOT to promote myself but from all the comments and feedback everyone has stated it is the most detailed and informative on You Tube on the glass replacement procedure. I also have separate videos on shattered glass replacement. Thanks and good luck.
Somehow my younger nephew got hold of my phone and thought it would be funny to use a dirty rubber on the back of it. Luckily I caught him in the act just in time before he done more damage to it and now my phone has a medium sized patch thats quite dark and noticible. While its not a major problem its kinda spoilt the beautiful finish of the back of HOX. I tried using a damp cloth and scrubbing real hard to get rid of it but it didnt make the slightest difference. Is there any way I can get rid of it and bring it back to the normal look or am I stuck with this? Attached a photo to give you a better idea of what it looks like, it actually doesnt look that bad in the picture but trust me its alot worse.
Try a bit of CIF mate, I heard that works.
Be careful!
Try using a clean rubber ??
Wilks3y said:
Try a bit of CIF mate, I heard that works.
Be careful!
Click to expand...
Click to collapse
chaun1308 said:
Try using a clean rubber ??
Click to expand...
Click to collapse
Tried both these suggestions, neither worked
I have no idea what can you do at this situation d ... I'd probably use a damp cloth but since it didn't work .... >.< Buy a case for it if you don't want the patch to be seen or , this might be nuts but use paint thinner LOL
Why was he humping your phone?
Sent from my AT100 using xda premium
DharmzVala said:
Tried both these suggestions, neither worked
Click to expand...
Click to collapse
a brand new backing is around sixty bucks, just change it
Sent from my HTC One X using Tapatalk 2
What is dirty rubber? Was it something like one of those hard abrasive ink erasers? If it was one of those then most probably that area is worn off. Probably nothing much you can do except change the entire case, or you could try to rub the rest of the surface with the same thing to give it a uniform look . I did something similar with one of my old Siemens phones, it had a painted back which was fading away due to normal wear, so I took a very soft sandpaper and sanded away all the paint to give it a nice uniform matte black finish. It turned out pretty good considering how it looked before .
PhoenixFx said:
What is dirty rubber? Was it something like one of those hard abrasive ink erasers? If it was one of those then most probably that area is worn off. Probably nothing much you can do except change the entire case, or you could try to rub the rest of the surface with the same thing to give it a uniform look . I did something similar with one of my old Siemens phones, it had a painted back which was fading away due to normal wear, so I took a very soft sandpaper and sanded away all the paint to give it a nice uniform matte black finish. It turned out pretty good considering how it looked before .
Click to expand...
Click to collapse
i think the english call erasers rubber.
Sent from my HTC One X using Tapatalk 2
I'd try some lens cleaner spray and a lens cloth. It my be like the finger prints that become hard to get off. I lens cleaner has really helped me
Sent from my One X using xda premium
ruffdogtechy said:
I'd try some lens cleaner spray and a lens cloth. It my be like the finger prints that become hard to get off. I lens cleaner has really helped me
Sent from my One X using xda premium
Click to expand...
Click to collapse
Lens cleaner is generally just very pure Isopropyl alcohol
Nevermind guys i just decided to buy a case and use that lol.
Try hair spray. It's the best solvent...
Just a bit on a rag and wipe the back before it's getting dry.
Have been thinking of trying this
http://www.youtube.com/watch?v=EZuYzQrIHjA
Has anyone tried it and have any info on how it looks and whether it has stayed as good or corroded/got worse over time. From the video it looks really nice but not sure how it is in real life. I don't really like the look of it currently so am willing to give this a go if I get positive feedback.
Do it anyway - you can replace the bezel fairly easily right?
Yeah true. . But still don't wanna ruin it if it ends up turning into a mess
I actually was thinking about removing the chrome entirely by either using this method or by using sand paper, just not sure how that would turn out to be since i havent seen anyone else doing. I think for starters ill try this out tomorrow as i truly dislike the chrome look plus its a good time to cover up those scratched with more scratches.lol. Thanks for this video.
bushako said:
I actually was thinking about removing the chrome entirely by either using this method or by using sand paper, just not sure how that would turn out to be since i havent seen anyone else doing. I think for starters ill try this out tomorrow as i truly dislike the chrome look plus its a good time to cover up those scratched with more scratches.lol. Thanks for this video.
Click to expand...
Click to collapse
I did it and it actually looks really nice. And also seems to improve grip slightly hopefully it'll stay looking this good.
I used the green part of one of those washing sponge things. Don't apply too much pressure, start very lightly and work up the pressure when you feel confortable.
By the way, with the method I used it doesn't have any scratches at all.. just that lovely brushed chrome look.
okay couldnt wait so i went ahead and did it.
bushako said:
okay couldnt wait so i went ahead and did it.
Click to expand...
Click to collapse
What do you think of it?
Sent from my Galaxy Note II LTE using Tapatalk
fade2black101 said:
What do you think of it?
Sent from my Galaxy Note II LTE using Tapatalk
Click to expand...
Click to collapse
Its alright tbh. Thing is I always have the Samsung Protective Cover+ on coz without the cover the phone just feels flimsy and very delicate. But yea otherwise the bezel is still better looking with brushed metal look. I would only recommend to someone who already has a scratched up bezel.
Sent from my GT-N7100 using xda app-developers app
How about painting the bezel before brushing? What do you think? Is it possible? My devices bezel has some white points where the grey paint is gone.
_delice_doluca_ said:
How about painting the bezel before brushing? What do you think? Is it possible? My devices bezel has some white points where the grey paint is gone.
Click to expand...
Click to collapse
No idea
But with the cost and ease of replacing it, its cetainly worth a go.
Sent from my Galaxy Note II LTE using Tapatalk
_delice_doluca_ said:
How about painting the bezel before brushing? What do you think? Is it possible? My devices bezel has some white points where the grey paint is gone.
Click to expand...
Click to collapse
I wouldn't recommend painting over the existing chrome paint as it would be uneven and not really worth all the trouble especially if it already has some chipping. However, you could try plastic/rubber spray paint you can easily find at the hardware store. You can always take those things off easily leaving the chrome paint intact. Another option is to completely remove the chrome paint with perhaps a nail polish remover or something; you'll be left with a nice uni body like polycarbonate housing
Sent from my GT-N7100 using xda app-developers app
bushako said:
I wouldn't recommend painting over the existing chrome paint as it would be uneven and not really worth all the trouble especially if it already has some chipping. However, you could try plastic/rubber spray paint you can easily find at the hardware store. You can always take those things off easily leaving the chrome paint intact. Another option is to completely remove the chrome paint with perhaps a nail polish remover or something; you'll be left with a nice uni body like polycarbonate housing
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
That, I tried. But after I created a 1 cm white opening the fact suddenly hit me! Removing the paint on the buttons was not so easy and some grey paint would remain.