Somehow my younger nephew got hold of my phone and thought it would be funny to use a dirty rubber on the back of it. Luckily I caught him in the act just in time before he done more damage to it and now my phone has a medium sized patch thats quite dark and noticible. While its not a major problem its kinda spoilt the beautiful finish of the back of HOX. I tried using a damp cloth and scrubbing real hard to get rid of it but it didnt make the slightest difference. Is there any way I can get rid of it and bring it back to the normal look or am I stuck with this? Attached a photo to give you a better idea of what it looks like, it actually doesnt look that bad in the picture but trust me its alot worse.
Try a bit of CIF mate, I heard that works.
Be careful!
Try using a clean rubber ??
Wilks3y said:
Try a bit of CIF mate, I heard that works.
Be careful!
Click to expand...
Click to collapse
chaun1308 said:
Try using a clean rubber ??
Click to expand...
Click to collapse
Tried both these suggestions, neither worked
I have no idea what can you do at this situation d ... I'd probably use a damp cloth but since it didn't work .... >.< Buy a case for it if you don't want the patch to be seen or , this might be nuts but use paint thinner LOL
Why was he humping your phone?
Sent from my AT100 using xda premium
DharmzVala said:
Tried both these suggestions, neither worked
Click to expand...
Click to collapse
a brand new backing is around sixty bucks, just change it
Sent from my HTC One X using Tapatalk 2
What is dirty rubber? Was it something like one of those hard abrasive ink erasers? If it was one of those then most probably that area is worn off. Probably nothing much you can do except change the entire case, or you could try to rub the rest of the surface with the same thing to give it a uniform look . I did something similar with one of my old Siemens phones, it had a painted back which was fading away due to normal wear, so I took a very soft sandpaper and sanded away all the paint to give it a nice uniform matte black finish. It turned out pretty good considering how it looked before .
PhoenixFx said:
What is dirty rubber? Was it something like one of those hard abrasive ink erasers? If it was one of those then most probably that area is worn off. Probably nothing much you can do except change the entire case, or you could try to rub the rest of the surface with the same thing to give it a uniform look . I did something similar with one of my old Siemens phones, it had a painted back which was fading away due to normal wear, so I took a very soft sandpaper and sanded away all the paint to give it a nice uniform matte black finish. It turned out pretty good considering how it looked before .
Click to expand...
Click to collapse
i think the english call erasers rubber.
Sent from my HTC One X using Tapatalk 2
I'd try some lens cleaner spray and a lens cloth. It my be like the finger prints that become hard to get off. I lens cleaner has really helped me
Sent from my One X using xda premium
ruffdogtechy said:
I'd try some lens cleaner spray and a lens cloth. It my be like the finger prints that become hard to get off. I lens cleaner has really helped me
Sent from my One X using xda premium
Click to expand...
Click to collapse
Lens cleaner is generally just very pure Isopropyl alcohol
Nevermind guys i just decided to buy a case and use that lol.
Try hair spray. It's the best solvent...
Just a bit on a rag and wipe the back before it's getting dry.
Related
Hi!
I'm an owner of the HTC One X and I'm also a clean freak!
I noticed that the back marks really easily and the only way of cleaning it I have found so far is to use window cleaner, but I'm worried it will damage the material. Does anybody have any ideas?
Also, dust and dirt get into the gaps between the screen and the bezel, as well as inside the front facing camera. Once again, any ideas?
I'd be happy to hear any suggestions or any other troubles people have had cleaning it.
Thank you!
ORStoner said:
Also, dust and dirt get into the gaps between the screen and the bezel, as well as inside the front facing camera. Once again, any ideas?
Click to expand...
Click to collapse
I used some post-it notes and carefully cleaned out the dust. If anything gets stick in the speaker holes then you can use the sticky part of a post-it to remove it.
Don't go nuts though and really jam in the paper as you might get it stuck then tear it or you may push dust further into the phone.
There is a paper tape. It is very good suction dust >>> People still use it to suck the dust particles remaining on the screen before applying the protective sheet.
I think the measures are very good so you can remove dust in crevices on your device.
Thanks, it works!
The problem is I used a pin before and I think I've pushed a lot in too far.
I guess I messed up.
What colour phone do you have?
Sent from my HTC One X using Tapatalk 2
I have been using "Pledge clean and dust multi-surface Original" for a couple of years to clean my notebook including the screen and and other electronics including my mobile phones it works great, also it cheap to buy, just make sure you spay a small amount onto a cloth and not on the item to be cleaned.
It says it for metal, electronic, glass and wood on the can.
http://www.ocado.com/product/50112011
John.
jameslfc5 said:
What colour phone do you have?
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
I have the Grey version.
ORStoner said:
I have the Grey version.
Click to expand...
Click to collapse
Can you please make some photos of the marks and tell how scratch prone is the phone.
I'm thinking if airbrushing some speckles into my white One X so that if it does get dirty, you wont be able to tell!!!
Reckless187 said:
I'm thinking if airbrushing some speckles into my white One X so that if it does get dirty, you wont be able to tell!!!
Click to expand...
Click to collapse
I think an airbrushed one x would look amazing actually . I hope someone is crazy enough to do it
Idk but this product pop out my mind when I saw this thread cyber clean
ORStoner said:
I noticed that the back marks really easily and the only way of cleaning it I have found so far is to use window cleaner, but I'm worried it will damage the material. Does anybody have any ideas?
Click to expand...
Click to collapse
You could test it by spraying some on an old junk CD/DVD that you don't want. The One X case is polycarbonate and so are CDs/DVDs. The exact recipe of polycarbonate isn't going to be the same but if the cleaner damages the CD/DVD then it isn't going to be a good idea to try it on the One X.
for daily cleaning the DHD official case with microfiber internals is doing wonders
sadly a little bit of the phone remains out of it like 5-10%
I got the white one x and typically use just water and microfiber cloth. If water doesn't do the trick I use eye glass solution. Seems to work fine.
Sent from my HTC One X using XDA
I have the white HTC One X, and I work building and fitting sheds and gates ( so a lot of dirt ). I picked up my phone after a days work and the back just got covered in dirt finger prints/smudges, and i know this sounds ridiculous, but the next day they were all gone and the phone was as clean as new... Thanks HTC for the self cleaning phone
ORStoner said:
Hi!
I'm an owner of the HTC One X and I'm also a clean freak!
I noticed that the back marks really easily and the only way of cleaning it I have found so far is to use window cleaner, but I'm worried it will damage the material. Does anybody have any ideas?
Also, dust and dirt get into the gaps between the screen and the bezel, as well as inside the front facing camera. Once again, any ideas?
I'd be happy to hear any suggestions or any other troubles people have had cleaning it.
Thank you!
Click to expand...
Click to collapse
Try using 3M lint remover.
Sent from my HTC One X using xda premium
wayne56 said:
I have the white HTC One X, and I work building and fitting sheds and gates ( so a lot of dirt ). I picked up my phone after a days work and the back just got covered in dirt finger prints/smudges, and i know this sounds ridiculous, but the next day they were all gone and the phone was as clean as new... Thanks HTC for the self cleaning phone
Click to expand...
Click to collapse
and there goes my worries about getting the white one because it might get dirty very quickly
zekit said:
and there goes my worries about getting the white one because it might get dirty very quickly
Click to expand...
Click to collapse
The only time I have noticed it got dirty was the first time taking it into work, once it 'self cleaned' it has never had dirt smudges on it since ( not from memory anyway), strange I know, I'm not mad...
OP, Google a product called Cyber Clean. It's similar to silly puddy. You smear it on your phone. Once you remove the goo, it picks up most of the hard to reach dust particles. You can get it at most computer stores.
Sent from my HTC Desire using Tapatalk 2
I was using some liquid eyeglass cleaner on my screen and some must have leaked in to the display. A dark grey blob started from the left of the display and gradually began moving toward the center, shrinking as it made its way across the screen. It ended up disappearing overnight and there's no sign that it was ever there. Moral of the story? 1) Be careful with liquid cleaners and 2) the display's not entirely or well sealed.
I know there are forums out there that talks about painting the Nexus Housing, but I want instructions that shows that the paint won't rub off, chip, and crack.
Have anyone found instructions that has flawless results that last if done right???
Doubt you'll find such a guarantee as nothing lasts for ever.....
SysAdmNj said:
Doubt you'll find such a guarantee as nothing lasts for ever.....
Click to expand...
Click to collapse
True. But I didn't say forever. I said that last.
And by last I mean at least a year. Ice only dropped the phone once between my 7 months. So I'm pretty confident I won't drop it again.
Dragn4rce said:
I know there are forums out there that talks about painting the Nexus Housing, but I want instructions that shows that the paint won't rub off, chip, and crack.
Have anyone found instructions that has flawless results that last if done right???
Click to expand...
Click to collapse
Mask properly.
Sand liberally, but not abusively.
Primer optional.
Paint lightly to prevent running.
Multiple layers. Let set in between.
Allow plenty of time to dry.
Use a dust free environment. I recommend rigging a couple CPU fans near it pointing away.
Sent from my Galaxy Nexus using xda premium
Jubomime said:
Mask properly.
Sand liberally, but not abusively.
Primer optional.
Paint lightly to prevent running.
Multiple layers. Let set in between.
Allow plenty of time to dry.
Use a dust free environment. I recommend rigging a couple CPU fans near it pointing away.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
You forgot the oven bake drying or somethin...
Jubomime said:
Mask properly.
Sand liberally, but not abusively.
Primer optional.
Paint lightly to prevent running.
Multiple layers. Let set in between.
Allow plenty of time to dry.
Use a dust free environment. I recommend rigging a couple CPU fans near it pointing away.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
What brand of paint so you recommend for this job???
Don't say of my choosing. I want ur opinion of what would do well for this kind of use.
SysAdmNj said:
You forgot the oven bake drying or somethin...
Click to expand...
Click to collapse
That step is that between which one???
You can also use a paint that has the primer built in but again it is optional. Its not like your painting an orange wall white . Anyways I did I used rustoleum also the key is to LET IT DRY between applications. And do not do multiple applications because it will take forever to dry and u do not have forever as u need ur phone. Beside u only need 4 to 5 light coats. Distribute evenly good luck
sarni84 said:
You can also use a paint that has the primer built in but again it is optional. Its not like your painting an orange wall white . Anyways I did I used rustoleum also the key is to LET IT DRY between applications. And do not do multiple applications because it will take forever to dry and u do not have forever as u need ur phone. Beside u only need 4 to 5 light coats. Distribute evenly good luck
Click to expand...
Click to collapse
Thanks.
So you've painted ur phone??? How is it holding up??? And how long have it been???
My dad keeps saying I'm gonna fu×k up and that it will chip no matter what and I'm like, "challenge accepted.:sly:"
A chip is a chip.. but how bad it looks after the chip will depend on how thick the paint is. Considering the material you're painting, I would go with a paint specific for plastics. Try a hobby store that has a good model car section.
Sent from my Galaxy Nexus using xda premium
But to be perfectly honest, if you're asking us for painting advice then you probably aren't pro. That means there's a good chance your dad is right. My advice is don't do it. But if you do, mask the **** out of it.
Sent from my Galaxy Nexus using xda premium
Don't listen to him (your dad) and so far no chips and everything looks good its been about 3 weeks also. Anyways be careful when taking volume and power rockers off they are easy tho and for the gold pogo pins there is a black bar that goes over them work on each end and pry the bar up it will have a hole on each end. Then when the black bar is off u will see three individual pogo pins u have to stick something against them from outside (like pushing them inward) then they will fallout out. Tape off everything that is important. And remember this will prolly void your warranty so u should grab an extra grey housing and battery cover (if u decide to paint that). I personally am getting the white housing and white battery door I get bored quick
Jubomime said:
A chip is a chip.. but how bad it looks after the chip will depend on how thick the paint is. Considering the material you're painting, I would go with a paint specific for plastics. Try a hobby store that has a good model car section.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Alright. Thanks for that.
I have a dumb question, how come the paint doesn't chip of a car easily if you paint a fiber glass part.
My dad has a bumper and it came white and got it painted black and not a single chip.
sarni84 said:
Don't listen to him (your dad) and so far no chips and everything looks good its been about 3 weeks also. Anyways be careful when taking volume and power rockers off they are easy tho and for the gold pogo pins there is a black bar that goes over them work on each end and pry the bar up it will have a hole on each end. Then when the black bar is off u will see three individual pogo pins u have to stick something against them from outside (like pushing them inward) then they will fallout out. Tape off everything that is important. And remember this will prolly void your warranty so u should grab an extra grey housing and battery cover (if u decide to paint that). I personally am getting the white housing and white battery door I get bored quick
Click to expand...
Click to collapse
Yeah I'm gonna buy a new one before doing this and use the old one as my test since it has dings and scratches on it.
sarni84 said:
I personally am getting the white housing and white battery door I get bored quick
Click to expand...
Click to collapse
I have the Verizon i515 version.
The only thing available is the white door.
Damn those sellers!!!!! Selling stuff half way.
Vinyl dye bonds directly to plastic, dries in minutes, and won't chip or scratch away. Just 2-3 light coats is all you need for good coverage. The only limitation is that you don't have much choice in the color or finishes.
earlyberd said:
Vinyl dye bonds directly to plastic, dries in minutes, and won't chip or scratch away. Just 2-3 light coats is all you need for good coverage. The only limitation is that you don't have much choice in the color or finishes.
Click to expand...
Click to collapse
Love that word. Bond.
Jubomime said:
But to be perfectly honest, if you're asking us for painting advice then you probably aren't pro. That means there's a good chance your dad is right. My advice is don't do it. But if you do, mask the **** out of it.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I know how to paint.
Just don't know what to do with a housing that gonna be rubbed against my skin and pants.
Dragn4rce said:
Love that word. Bond.
Click to expand...
Click to collapse
It's a good word for what vinyl dye does. I've been using it for years when painting game controllers and have never had it wear off.
Hey guys!
I'm wondering if there is a safe cleaning material to clean the white HOX, I mean the back side to return it to original pure white...maybe windex..Jeff..clorex..etc
Ok, I provides my method but I never recommeding you to do the same with me..
This is how I cleaned it: rinse my hands with water, pour out a bit, hold my HOX, mop around with hands, wipe it off. (while water is most effective medium to clean thing, please make sure the quantity of the water will are not enough to spills in microUSB and ear jack holes)
ahmed4never said:
Hey guys!
I'm wondering if there is a safe cleaning material to clean the white HOX, I mean the back side to return it to original pure white...maybe windex..Jeff..clorex..etc
Click to expand...
Click to collapse
Ive used windex on mine before, put a little bit on the screen too, makes it all lovely again
Thanks guys I will try windex
ahmed4never said:
Thanks guys I will try windex
Click to expand...
Click to collapse
I wouldn't use windex, if you must, then make sure its at least ammonia free. I'm not quite sure about the One X, but some phones have very thin layers of anti-glare/anti-fingerprint coatings applied on the screen, use of strong window cleaners can damage those layers.
I mostly use a wet micro fiber cloth and that does the job well, rarely even use soap. I suggest you start with just water and if it doesn't work, try with soap and finally move into special purpose cleaners if you must.
Rubbing alcohol will work. Wet a microfiber cloth and squeeze out excess fluid, then wipe down the device.
Fussy with your phones..........I wonder if you guys are just as fussy with your cars/houses??? :laugh:
I tried Windex ...it did the job thanks a lot guys
Haha my house is a tip. My phone is perfect!!
Sent from my HTC One X using xda app-developers app
Have been thinking of trying this
http://www.youtube.com/watch?v=EZuYzQrIHjA
Has anyone tried it and have any info on how it looks and whether it has stayed as good or corroded/got worse over time. From the video it looks really nice but not sure how it is in real life. I don't really like the look of it currently so am willing to give this a go if I get positive feedback.
Do it anyway - you can replace the bezel fairly easily right?
Yeah true. . But still don't wanna ruin it if it ends up turning into a mess
I actually was thinking about removing the chrome entirely by either using this method or by using sand paper, just not sure how that would turn out to be since i havent seen anyone else doing. I think for starters ill try this out tomorrow as i truly dislike the chrome look plus its a good time to cover up those scratched with more scratches.lol. Thanks for this video.
bushako said:
I actually was thinking about removing the chrome entirely by either using this method or by using sand paper, just not sure how that would turn out to be since i havent seen anyone else doing. I think for starters ill try this out tomorrow as i truly dislike the chrome look plus its a good time to cover up those scratched with more scratches.lol. Thanks for this video.
Click to expand...
Click to collapse
I did it and it actually looks really nice. And also seems to improve grip slightly hopefully it'll stay looking this good.
I used the green part of one of those washing sponge things. Don't apply too much pressure, start very lightly and work up the pressure when you feel confortable.
By the way, with the method I used it doesn't have any scratches at all.. just that lovely brushed chrome look.
okay couldnt wait so i went ahead and did it.
bushako said:
okay couldnt wait so i went ahead and did it.
Click to expand...
Click to collapse
What do you think of it?
Sent from my Galaxy Note II LTE using Tapatalk
fade2black101 said:
What do you think of it?
Sent from my Galaxy Note II LTE using Tapatalk
Click to expand...
Click to collapse
Its alright tbh. Thing is I always have the Samsung Protective Cover+ on coz without the cover the phone just feels flimsy and very delicate. But yea otherwise the bezel is still better looking with brushed metal look. I would only recommend to someone who already has a scratched up bezel.
Sent from my GT-N7100 using xda app-developers app
How about painting the bezel before brushing? What do you think? Is it possible? My devices bezel has some white points where the grey paint is gone.
_delice_doluca_ said:
How about painting the bezel before brushing? What do you think? Is it possible? My devices bezel has some white points where the grey paint is gone.
Click to expand...
Click to collapse
No idea
But with the cost and ease of replacing it, its cetainly worth a go.
Sent from my Galaxy Note II LTE using Tapatalk
_delice_doluca_ said:
How about painting the bezel before brushing? What do you think? Is it possible? My devices bezel has some white points where the grey paint is gone.
Click to expand...
Click to collapse
I wouldn't recommend painting over the existing chrome paint as it would be uneven and not really worth all the trouble especially if it already has some chipping. However, you could try plastic/rubber spray paint you can easily find at the hardware store. You can always take those things off easily leaving the chrome paint intact. Another option is to completely remove the chrome paint with perhaps a nail polish remover or something; you'll be left with a nice uni body like polycarbonate housing
Sent from my GT-N7100 using xda app-developers app
bushako said:
I wouldn't recommend painting over the existing chrome paint as it would be uneven and not really worth all the trouble especially if it already has some chipping. However, you could try plastic/rubber spray paint you can easily find at the hardware store. You can always take those things off easily leaving the chrome paint intact. Another option is to completely remove the chrome paint with perhaps a nail polish remover or something; you'll be left with a nice uni body like polycarbonate housing
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
That, I tried. But after I created a 1 cm white opening the fact suddenly hit me! Removing the paint on the buttons was not so easy and some grey paint would remain.
Hello guys,i've had some scratches on my M8 lens and i watched videos where people got rid of this problem by using a toothpaste.I tried the same method but my camera went even worse than it used to be.... i currently don't have an other device to take a photo of it.Im wondering if i can solve the problem if i get rubbing alcohol and try to clean it all over again ? :crying: :crying:
Didol123 said:
Hello guys,i've had some scratches on my M8 lens and i watched videos where people got rid of this problem by using a toothpaste.I tried the same method but my camera went even worse than it used to be.... i currently don't have an other device to take a photo of it.Im wondering if i can solve the problem if i get rubbing alcohol and try to clean it all over again ? :crying: :crying:
Click to expand...
Click to collapse
Never try and fix a scratch its not paint it can't be fixed! so putting toothpase on your phone will only help ruin it further. if you have a silicon based toothpast then you just rubbed really fine sand into your camera. your best bet is to take a soft cloth and some diluted rubbing alcohol and try and clean it. good luck!
Didol123 said:
Hello guys,i've had some scratches on my M8 lens and i watched videos where people got rid of this problem by using a toothpaste.I tried the same method but my camera went even worse than it used to be.... i currently don't have an other device to take a photo of it.Im wondering if i can solve the problem if i get rubbing alcohol and try to clean it all over again ? :crying: :crying:
Click to expand...
Click to collapse
Hello! I actually did this to my M8 today, and it worked GREAT, removed all the small scratches and my pictures are no longer blurry or washed out! All pictures now are CRISP as they were when I first got my M8. You need to LIGHTLY apply toothpaste, and then use nail polish remover or I used rubbing alcohol to get the scratches off. The M8's had a coating on the lens from factory, I read somewhere this was anti reflective film, but am not sure if that's true or not. Anyways, if you use toothpaste and then alcohol, you will remove this layer of stuff and its the coating that is scratched most likely, not your actual lens. Follow this video here (again) and see if it works. I would NOT use toothpaste that has gritty/sand like texture, this may scratch the actual lens and damage it.
Video link / method I used: https://www.youtube.com/watch?v=xhhOcIRMfWc
Good luck!
My Friend had a similar problem he sctrached his screen and his camera, and he used the same product he used to clean his car headlight lenses and surprisingly he actually did a decent job. Put it this way it was alot better than it was. I was really surprised.
Andr3w151 said:
My Friend had a similar problem he sctrached his screen and his camera, and he used the same product he used to clean his car headlight lenses and surprisingly he actually did a decent job. Put it this way it was alot better than it was. I was really surprised.
Click to expand...
Click to collapse
You can Use "Displex" (~5$ on ebay) to fix it... Your camera will be like it was new!
I've done three m8 cameras with toothpaste. It just takes time. It gets worse as you rub then gets better because it's removing the coating.
Sent from my HTC One_M8 using Xparent Blue Tapatalk 2
squito said:
Never try and fix a scratch its not paint it can't be fixed! so putting toothpase on your phone will only help ruin it further. !
Click to expand...
Click to collapse
Rubbish, yes you can, I have done it loads of times with metal polish such as brasso!
I have removed scratches from glass, plastic, LCD screens, phone camera lenses, watch lenses, all successfully with this method.
Didol123 said:
i watched videos where people got rid of this problem by using a toothpaste.I tried the same method but my camera went even worse than it used to be
Click to expand...
Click to collapse
Look very closely, does it appear that the coating is just getting more scratched (which is the intent, for the toothpaste to abrade the coating and remove it) or the camera glass is actually getting scratched.
Similar to a previous response, my guess is that you are just scratching the anti-glare coating (not the glass) and actually need to rub it more.
Mine appeared to be just the coating being scratched. Used this method and it worked great. I still have to get some of the coating off at the edges but 95% of it is gone and my lens is clear of these scratches now. Plus it gives your phone that minty fresh feeling.
Anyone know if this lens is gorilla glass?
theandies said:
Mine appeared to be just the coating being scratched. Used this method and it worked great. I still have to get some of the coating off at the edges but 95% of it is gone and my lens is clear of these scratches now. Plus it gives your phone that minty fresh feeling.
Anyone know if this lens is gorilla glass?
Click to expand...
Click to collapse
I read where one guy used a magic eraser (Mr Clean brand??) and he said that worked the best for him. I wonder if they "fixed" the issue with the coating on newer phones?? I have had mine for a few weeks now...always carry it in my pocket(s) and do not use any case and all three of my lenses have zero scratches on them?? I have been watching closely to make sure since I've read about all those having this issue on three different forums.
jaseman said:
I read where one guy used a magic eraser (Mr Clean brand??) and he said that worked the best for him. I wonder if they "fixed" the issue with the coating on newer phones?? I have had mine for a few weeks now...always carry it in my pocket(s) and do not use any case and all three of my lenses have zero scratches on them?? I have been watching closely to make sure since I've read about all those having this issue on three different forums.
Click to expand...
Click to collapse
I bought my phone at the end of July so yours probably has the coating. I didn't notice the "scratches" until I wanted to take a picture the other day and I always wipe the lens with my shirt to get finger prints off after taking it out of my pocket. If the lens glass itself is gorilla glass I'm not too worried about it scratching in the future because I dedicate my pocket to my phone and nothing else goes in that pocket.
jaseman said:
I read where one guy used a magic eraser (Mr Clean brand??) and he said that worked the best for him. I wonder if they "fixed" the issue with the coating on newer phones?? I have had mine for a few weeks now...always carry it in my pocket(s) and do not use any case and all three of my lenses have zero scratches on them?? I have been watching closely to make sure since I've read about all those having this issue on three different forums.
Click to expand...
Click to collapse
+1on the magic eraser it worked like a charm no need to use toothpaste all scratches gone. Just wet the magic eraser, squeeze the water out, lay phone screen on flat surface " soft magazine " with camera facing you, I would get a bright lamp to point and the surface you going to scrub the camera lens cover, and use magic eraser in a circular motion and you will see the coating come off. Hope this helps anybody who has the scratches.
Sent from my M8 using XDA Free mobile app
treIII said:
I've done three m8 cameras with toothpaste. It just takes time. It gets worse as you rub then gets better because it's removing the coating.
Sent from my HTC One_M8 using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
I can confirm this works. Also a clean pencil eraser. It takes about 20mins though. I used toothpaste too, and freaked out when I saw how badly it got scratched. Tried the eraser method for around 5mins and figured my cam was screwed. The next day I started rubbing with the eraser and didn't stop. I had time and nothing to lose. Cleared everything right up except the extreme edges. DO IT!