Related
Now I am not blaming the app I am just wondering... everynow and then, when I wake my phone up, it doesn't want to wake up or when I turn it on and try to unlock it freezes... was wondering if anyone else was getting the same thing.
Rooted using the one-click method.
Screen off setting is min 400 max 400.
Sent from my SPH-D700 using XDA App
SetCPU issues
I have been having the same issues myself. Mine was set low to 100min/max: screen off just as a test today and it did that to me a on a few seperate occasions. Not sure why, just ended up battery pulling after 10-15 seconds of no response from the phone.
The cpu is set too low on screen off, go for 245 or so
setcpu does not play nice with r phones. i had problems witth it on every kernal i played with. right now im using the mix up kernal. i used setcpu to 1.2ghz max and 100mhz min. conservative governore. i have yet to find a set up to use while the screen is locked with no issues. what i do know is galaxy s phones only like the conservative setting. maybe a 400mhz max 100mhz min with conservastive governore would work?
Make sure setcpu is set to conservative. I set my lowest to 200mhz and max at 1200. No issues here other than sometimes the notification pull down bar is laggy but it does that stock anyway.
Sent from my SPH-D700 using Tapatalk
I'll try out those settings tomorrow. Thanks guys =)
Any1 know how to get to 1.4 ghz? my max is 1.2 on setCPU and i have voodoo kernel flashed
Try this to hit 1.4.
http://forum.androidcentral.com/epic-4g-roms-hacks/36554-emergency-rom-alert-baked-snack-1-0-a.html
zetterwing said:
Try this to hit 1.4.
http://forum.androidcentral.com/epic-4g-roms-hacks/36554-emergency-rom-alert-baked-snack-1-0-a.html
Click to expand...
Click to collapse
thanx dude i really appreciate it but still only 1.2 for sum reason
II5StarII Swag said:
thanx dude i really appreciate it but still only 1.2 for sum reason
Click to expand...
Click to collapse
There's a kernal that allows you to hit 1.4ghz its the overclocked one from baked snacks
Sent from my SPH-D700 using XDA App
mysteryemotionz said:
There's a kernal that allows you to hit 1.4ghz its the overclocked one from baked snacks
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
thats the rom i switched from dude both only allowed up to 1.2ghz thanxs for replying
II5StarII Swag said:
thats the rom i switched from dude both only allowed up to 1.2ghz thanxs for replying
Click to expand...
Click to collapse
The rom don't control the cpu speeds. The kernal does. You cab run any rom kernal combo you would like. In order to hit the 1.4ghz you want you need to run a kernal that is capable of doing so
Sent from my SPH-D700 using XDA App
Is SetCPU really necessary anymore? If you run a kernel that's not locked into performance mode it will scale on it's own even without SetCPU. I haven't installed it on my Epic yet and when monitoring the phone with SystemPanel I see my CPU go down to 200mhz when idle and scale up when processes are running.
Where is the kernel for 1.4? I have baked snack rom max is 1.2 i know kernel is the part that "controlls" speed but I'm stuck. Any help
Sent from my SPH-D700 using XDA App
specialk0324 said:
Where is the kernel for 1.4? I have baked snack rom max is 1.2 i know kernel is the part that "controlls" speed but I'm stuck. Any help
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Last I knew it was on the baked snacks website
Sent from my SPH-D700 using XDA App
It would be the same thing as setting it to 768 max 245 min conservative right? Also would it be safe to have 245 max & min ondemand or would that create problems?
fredrick1213 said:
It would be the same thing as setting it to 768 max 245 min conservative right? Also would it be safe to have 245 max & min ondemand or would that create problems?
Click to expand...
Click to collapse
Reallllyyyyyt slloooowwww
Sent from my Incredible 2 using xda premium
knipp21 said:
Reallllyyyyyt slloooowwww
Sent from my Incredible 2 using xda premium
Click to expand...
Click to collapse
I should have clarified but it's for screen off only. I want to save battery on Andy's Bonestock ROM with stock kernel
fredrick1213 said:
I should have clarified but it's for screen off only. I want to save battery on Andy's Bonestock ROM with stock kernel
Click to expand...
Click to collapse
Screen wake up will be slow.
Sent from my Incredible 2 using xda premium
knipp21 said:
Screen wake up will be slow.
Sent from my Incredible 2 using xda premium
Click to expand...
Click to collapse
I just set it on SetCPU and haven't noticed a delay in screen wake up time
Try it with oc beater.. do a temp activate.. if it restarts it'll go back to whatever is perminantly set
Sent from my ADR6350 using xda premium
I had screen off set 245 for both the min and max.. with conservative... For an asop or sense 3.0 Rom or lower it was cool... For 3.5 I ended up putting max one higher and had better luck...
Smartass v2 is what I normally use now.. it runs great battery
Sent from my ADR6350 using xda premium
Hello All,
Can anyone give me a proper procedure of how to use the Incredicontrol app? I downloaded the app from the market and checked the posts on the forum. I read it shows two lists with the + & - signs to set the min and max temp. but in my app I can only see the one list with + & - signs and I am not able to get how to set the temp. Please help.. I have attached the screenshot.. Please go through it...
I am with XperiaMod6 with DooMKernel v19.
to undervolt, use that - for All.
it decreases 25. do it again and apply to see how far you can go, yet stable .
---------- Post added at 04:57 PM ---------- Previous post was at 04:55 PM ----------
to undervolt, use that - for All.
it decreases 25. do it again and apply to see how far you can go, yet stable .
Sorry I didnt get u...
I knw that it is for undervolting. I just want to know y my app looks different than that specified on the forum? What do all those nos. mean? are those different frequencies?
mandarjoshiin said:
Sorry I didnt get u...
I knw that it is for undervolting. I just want to know y my app looks different than that specified on the forum? What do all those nos. mean? are those different frequencies?
Click to expand...
Click to collapse
This app shows you voltages each frequency.
Why different....its simple and working app.
Sent from my MT15i using Tapatalk
I have tried it...
Try undervolting it with -100 on all... That is stable on mine and then apply the settings
Sent from my LT18i using XDA App
DenmarkRootN00b said:
I have tried it...
Try undervolting it with -100 on all... That is stable on mine and then apply the settings
Sent from my LT18i using XDA App
Click to expand...
Click to collapse
Wow....-100 All....and stable?
Sent from my MT15i using Tapatalk
Better try -50mV at first.
Mine was stable from -100mV to -200mV and after 4 months with oc I had to go back to -75mV to -175mV.
Sent from my LT15i using XDA Premium App
taaviu said:
Wow....-100 All....and stable?
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
Yes -100 and no overclock works great for me.... And my battery life is pretty good with Xperia mod v6 and doomkernel v19 and baseband 64 + patch but try with -50 to get started :-D
Sent from my LT18i using XDA App
DenmarkRootN00b said:
Yes -100 and no overclock works great for me.... And my battery life is pretty good with Xperia mod v6 and doomkernel v19 and baseband 64 + patch but try with -50 to get started :-D
Sent from my LT18i using XDA App
Click to expand...
Click to collapse
Im heavy user and already over -50 is unstable for me
Does anybody have any idea how to setup 2 or more voltage profiles?
ETC: Screen off voltage profile and screen on voltage profile
Makes no sense, CPU can't handle different undervolting when screen is off or on.
Sent from my iPad 2 using Tapatalk
Flo95 said:
Makes no sense, CPU can't handle different undervolting when screen is off or on.
Sent from my iPad 2 using Tapatalk
Click to expand...
Click to collapse
But why not?
If phone can handle different frequency...why not different voltages.?
If i can change voltages, then would be nice if screen off takes more -25 all frequency and if screen on then +25 to all
Why only "incredi control" voltage app works with Neo? It think wiht Arc too!?
Ummm I've been wondering about this... for a little while. Now I'm trying Incredicontrol and I'm undervolting my Arc -100mv. I'll run with that for now and see what kind of "possible problems" I may encounter if any.
taaviu said:
But why not?
If phone can handle different frequency...why not different voltages.?
If i can change voltages, then would be nice if screen off takes more -25 all frequency and if screen on then +25 to all
Why only "incredi control" voltage app works with Neo? It think wiht Arc too!?
Click to expand...
Click to collapse
taaviu said:
Im heavy user and already over -50 is unstable for me
Does anybody have any idea how to setup 2 or more voltage profiles?
ETC: Screen off voltage profile and screen on voltage profile
Click to expand...
Click to collapse
But you need to reboot for the volts to apply, so for that you'd need to reboot every time you want to use your phone ???
There's a setting that sets it on boot.
Hey guys, i got cyanogen mod 7.2 installed on my phone, and whenever i tried to change the max cpu speed from the settings, it would now work after boot. Most of the market programs i use freeze as soon as i try to apply my changes. I got "No-frills Cpu control" to work once, so i made it 844 max clock speed. (I confirm using android system info app"). EDIT: after another frozen reboot, the clock speed has gone back down to 787 again -_- . So frustrating!!
So i was wondering, which app do you use to overclock your gio that doesnt freeze?
AlwaysDroid said:
Hey guys, i got cyanogen mod 7.2 installed on my phone, and whenever i tried to change the max cpu speed from the settings, it would now work after boot. Most of the market programs i use freeze as soon as i try to apply my changes. I got "No-frills Cpu control" to work once, so i made it 844 max clock speed. (I confirm using android system info app"). EDIT: after another frozen reboot, the clock speed has gone back down to 787 again -_- . So frustrating!!
So i was wondering, which app do you use to overclock your gio that doesnt freeze?
Click to expand...
Click to collapse
you need to tick "set when boot" setting.
中国人正在尝试提高！
(translation:Chinese people are trying to improve themselves！)
AlwaysDroid said:
Hey guys, i got cyanogen mod 7.2 installed on my phone, and whenever i tried to change the max cpu speed from the settings, it would now work after boot. Most of the market programs i use freeze as soon as i try to apply my changes. I got "No-frills Cpu control" to work once, so i made it 844 max clock speed. (I confirm using android system info app"). EDIT: after another frozen reboot, the clock speed has gone back down to 787 again -_- . So frustrating!!
So i was wondering, which app do you use to overclock your gio that doesnt freeze?
Click to expand...
Click to collapse
set your cpu, mark the set on boot, reboot it
Sent from my GT-S5660 using Tapatalk 2 Beta-2
AlwaysDroid said:
Hey guys, i got cyanogen mod 7.2 installed on my phone, and whenever i tried to change the max cpu speed from the settings, it would now work after boot. Most of the market programs i use freeze as soon as i try to apply my changes. I got "No-frills Cpu control" to work once, so i made it 844 max clock speed. (I confirm using android system info app"). EDIT: after another frozen reboot, the clock speed has gone back down to 787 again -_- . So frustrating!!
So i was wondering, which app do you use to overclock your gio that doesnt freeze?
Click to expand...
Click to collapse
chris_toni said:
set your cpu, mark the set on boot, reboot it
Sent from my GT-S5660 using Tapatalk 2 Beta-2
Click to expand...
Click to collapse
Use set cpu..
U can set diff profile w/ that
@wiwid_colgate
Galaxy Gio S5660
#GalaxyICS
Best app for my Gio is Antutu CPU Master.
Set your overclock, thick set on boot and reboot your phone!
Alright, so i got my max set to 864 and min to 245, and while im using it i get a bunch of random reebots every 3 min, and one sleep of death where it wont wake up unless you pull battery -_-. Using built in overclock still
AlwaysDroid said:
Alright, so i got my max set to 864 and min to 245, and while im using it i get a bunch of random reebots every 3 min, and one sleep of death where it wont wake up unless you pull battery -_-. Using built in overclock still
Click to expand...
Click to collapse
Try to decrease the max profile...
@wiwid_colgate
Galaxy Gio S5660
#GalaxyICS
Note that every clock speed your device can handle is different, just try out wich is stable for you
Sent from my GT-S5660 using xda premium
use set cpu.set max 844 is good for gio then tick "set on boot"
I feel that the Smartassv2 cpu profile consumes more battery than the On demand one. Anyone here think the opposite?
Sent from my GT-S5660 using XDA
khanhtrinh said:
I feel that the Smartassv2 cpu profile consumes more battery than the On demand one. Anyone here think the opposite?
Sent from my GT-S5660 using XDA
Click to expand...
Click to collapse
Possible. But smartass also gives more performance than ondemand governor
Sent from my GT-S5660 using xda premium
voetbalremco said:
Possible. But smartass also gives more performance than ondemand governor
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
I'll have to try that, I am using on-demand currently
Which is the best governor for gaming performance?
Performance or smartass v2
Sent from my GT-S5660 using xda premium
For performance the best governor is "performance". It causes that processor overclocking is always the highest. It means that if you have overclcked processor at 921MHz, with this governor phone will always work at 921MHz. But don't use it, it drains battery as hell
The best governor for daily use is SmartassV2, because it's balance between performance and battery
And sorry for my English :|
Na szczęście jest TapaTalk
which 1 is best for daily uses????
i am using smartassv2 but sometimes my phone becomes very very slow takes 1mint to slide the status bar phone apps etc.....
what is i/o schedular??? is it effect the speed?? which 1 is best???
Now I just use the On demand governor. Smartassv2 drains my battery pretty fast
Sent from my GT-S5660 using XDA
mnhs1010 said:
which 1 is best for daily uses????
i am using smartassv2 but sometimes my phone becomes very very slow takes 1mint to slide the status bar phone apps etc.....
what is i/o schedular??? is it effect the speed?? which 1 is best???
Click to expand...
Click to collapse
any 1 answer me plz????????
fittono
Yup,any overclock will drain your battery quicker,this is very logical as you consume more power,right?I use No Frills CPU control,and i have my galaxy Gio set to 921 Mhz....! It realy works like asmall little pocket rocket now...I was already very satisfied with the price/performance ratio of this cheap little phone,but now with this stable OC it really hits it out of the park!!!No complaints from me about this phone..I'm gonna try and achieve an even higher oc,but it's really not a must,just want to know how far i can push it.No Frills has a benchmarker impemented ,very handy.
khanhtrinh said:
I feel that the Smartassv2 cpu profile consumes more battery than the On demand one. Anyone here think the opposite?
Sent from my GT-S5660 using XDA
Click to expand...
Click to collapse
That's true. But smartass is just like balance between perfomance and battery drain, which makes it the best governor
Hi,
is there any way of setting the cpu frequency at 1000mhz instead of ~800mhz in bada permanently? or even overclock the cpu?
best regards
JonasVFC said:
Hi,
is there any way of setting the cpu frequency at 1000mhz instead of ~800mhz in bada permanently? or even overclock the cpu?
best regards
Click to expand...
Click to collapse
The answer is in the following thread
http://forum.xda-developers.com/showthread.php?t=1697411
Sent from my GT-I9000 using xda app-developers app
ash009 said:
The answer is in the following thread
http://forum.xda-developers.com/showthread.php?t=1697411
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
but that is only temporary and as soon as you launch an application, like the browser or other (can't remember) it resets to 800mhz