Safe to set phone to 245 max & min w/ performance gov? - Verizon Droid Incredible 2

It would be the same thing as setting it to 768 max 245 min conservative right? Also would it be safe to have 245 max & min ondemand or would that create problems?

fredrick1213 said:
It would be the same thing as setting it to 768 max 245 min conservative right? Also would it be safe to have 245 max & min ondemand or would that create problems?
Click to expand...
Click to collapse
Reallllyyyyyt slloooowwww
Sent from my Incredible 2 using xda premium

knipp21 said:
Reallllyyyyyt slloooowwww
Sent from my Incredible 2 using xda premium
Click to expand...
Click to collapse
I should have clarified but it's for screen off only. I want to save battery on Andy's Bonestock ROM with stock kernel

fredrick1213 said:
I should have clarified but it's for screen off only. I want to save battery on Andy's Bonestock ROM with stock kernel
Click to expand...
Click to collapse
Screen wake up will be slow.
Sent from my Incredible 2 using xda premium

knipp21 said:
Screen wake up will be slow.
Sent from my Incredible 2 using xda premium
Click to expand...
Click to collapse
I just set it on SetCPU and haven't noticed a delay in screen wake up time

Try it with oc beater.. do a temp activate.. if it restarts it'll go back to whatever is perminantly set
Sent from my ADR6350 using xda premium

I had screen off set 245 for both the min and max.. with conservative... For an asop or sense 3.0 Rom or lower it was cool... For 3.5 I ended up putting max one higher and had better luck...
Smartass v2 is what I normally use now.. it runs great battery
Sent from my ADR6350 using xda premium

Related

SetCPU and screen not turning on...

Now I am not blaming the app I am just wondering... everynow and then, when I wake my phone up, it doesn't want to wake up or when I turn it on and try to unlock it freezes... was wondering if anyone else was getting the same thing.
Rooted using the one-click method.
Screen off setting is min 400 max 400.
Sent from my SPH-D700 using XDA App
SetCPU issues
I have been having the same issues myself. Mine was set low to 100min/max: screen off just as a test today and it did that to me a on a few seperate occasions. Not sure why, just ended up battery pulling after 10-15 seconds of no response from the phone.
The cpu is set too low on screen off, go for 245 or so
setcpu does not play nice with r phones. i had problems witth it on every kernal i played with. right now im using the mix up kernal. i used setcpu to 1.2ghz max and 100mhz min. conservative governore. i have yet to find a set up to use while the screen is locked with no issues. what i do know is galaxy s phones only like the conservative setting. maybe a 400mhz max 100mhz min with conservastive governore would work?
Make sure setcpu is set to conservative. I set my lowest to 200mhz and max at 1200. No issues here other than sometimes the notification pull down bar is laggy but it does that stock anyway.
Sent from my SPH-D700 using Tapatalk
I'll try out those settings tomorrow. Thanks guys =)
Any1 know how to get to 1.4 ghz? my max is 1.2 on setCPU and i have voodoo kernel flashed
Try this to hit 1.4.
http://forum.androidcentral.com/epic-4g-roms-hacks/36554-emergency-rom-alert-baked-snack-1-0-a.html
zetterwing said:
Try this to hit 1.4.
http://forum.androidcentral.com/epic-4g-roms-hacks/36554-emergency-rom-alert-baked-snack-1-0-a.html
Click to expand...
Click to collapse
thanx dude i really appreciate it but still only 1.2 for sum reason
II5StarII Swag said:
thanx dude i really appreciate it but still only 1.2 for sum reason
Click to expand...
Click to collapse
There's a kernal that allows you to hit 1.4ghz its the overclocked one from baked snacks
Sent from my SPH-D700 using XDA App
mysteryemotionz said:
There's a kernal that allows you to hit 1.4ghz its the overclocked one from baked snacks
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
thats the rom i switched from dude both only allowed up to 1.2ghz thanxs for replying
II5StarII Swag said:
thats the rom i switched from dude both only allowed up to 1.2ghz thanxs for replying
Click to expand...
Click to collapse
The rom don't control the cpu speeds. The kernal does. You cab run any rom kernal combo you would like. In order to hit the 1.4ghz you want you need to run a kernal that is capable of doing so
Sent from my SPH-D700 using XDA App
Is SetCPU really necessary anymore? If you run a kernel that's not locked into performance mode it will scale on it's own even without SetCPU. I haven't installed it on my Epic yet and when monitoring the phone with SystemPanel I see my CPU go down to 200mhz when idle and scale up when processes are running.
Where is the kernel for 1.4? I have baked snack rom max is 1.2 i know kernel is the part that "controlls" speed but I'm stuck. Any help
Sent from my SPH-D700 using XDA App
specialk0324 said:
Where is the kernel for 1.4? I have baked snack rom max is 1.2 i know kernel is the part that "controlls" speed but I'm stuck. Any help
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Last I knew it was on the baked snacks website
Sent from my SPH-D700 using XDA App

[Q] Best SetCPU settings?

As topic title suggests what are the best SetCPU settings for this phone (running ARHD 3.0), I'm new to SetCPU and the whole overclocking part of android (not new to android, i've been coming here and rooting etc since the G1 lol). Anyway just wondering if anyone has got any good setups/profiles they wish to share?
At the minute I just have my max at maximum and min at minimum with on demand scaling, nothing else. Any help is appreciated guys, thanks.
I use 245-1032mhz and smartass or interactive governor and I don't use any profiles because smartass locks the cpu @ 245 mhz when the display is turned off
Sent from my Desire HD using Tapatalk
245 min, 1228 max, smartass governor.
Works great for me.
Sent from my Desire HD using XDA App
245-1032mhz
How is the battery life with 1228MHz?
Sent from my Desire HD using XDA App
On-Demand 1036/245 & On-Demand 460/245 for screen-off.
No lag and battery life is awesome
toiversen said:
245 min, 1228 max, smartass governor.
Works great for me.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Tried these settings for a day now and really like them, had the same min and max but with on demand, smartass has definitely been giving me better battery over the course of today.
Sent from my Desire HD using XDA Premium App
I dobt have option to set smartass ect just ondenand performance and some other one any ideas why
Sent from my Desire HD using XDA App
snowwhite007 said:
I dobt have option to set smartass ect just ondenand performance and some other one any ideas why
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
I also dont have this option..
snowwhite007 said:
I dobt have option to set smartass ect just ondenand performance and some other one any ideas why
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Are you using the most recent version? 2.1.1a
Sent from my Desire HD using XDA Premium App
Daley87 said:
Are you using the most recent version? 2.1.1a
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
yeah 2.1.1a autodetect
Im using CM7 kernel, thats why...
Its because im not using a custom kernal apparantly
Sent from my Desire HD using XDA App
I have 245 - 1228 Mhz on demand , using Android revolution hd 3.0. Nearly 24h unplugged and on heavy use
Its because im using stock sense aha soz
Sent from my Desire HD using XDA App
Yes, smartass is nice. Especially since you don't need an extra "display off" profile. It sets CPU to 254 MHz automatically once the display is off.
That reminds me, is it just me or is adjusting the frequency/temperature etc settings on those sliders a pain in the a**? It'd be much easier if you could enter the digits using the keyboard instead of those sliders. Often the view is blocked by your own hand and setting exact values is almost impossible anyway.
bur2000 said:
Yes, smartass is nice. Especially since you don't need an extra "display off" profile. It sets CPU to 254 MHz automatically once the display is off.
That reminds me, is it just me or is adjusting the frequency/temperature etc settings on those sliders a pain in the a**? It'd be much easier if you could enter the digits using the keyboard instead of those sliders. Often the view is blocked by your own hand and setting exact values is almost impossible anyway.
Click to expand...
Click to collapse
I find On-Demand with a 460max / 245min screen-off profile works far better then Smartass with no profile as 245max caused wake lag for me + music player and Last.fm radio were stuttery when screen was off.
I do agree with your second point
CitizenLee said:
I find On-Demand with a 460max / 245min screen-off profile works far better then Smartass with no profile as 245max caused wake lag for me + music player and Last.fm radio were stuttery when screen was off.
I do agree with your second point
Click to expand...
Click to collapse
Will try this settings out, seems good!
bur2000 said:
Yes, smartass is nice. Especially since you don't need an extra "display off" profile. It sets CPU to 254 MHz automatically once the display is off.
That reminds me, is it just me or is adjusting the frequency/temperature etc settings on those sliders a pain in the a**? It'd be much easier if you could enter the digits using the keyboard instead of those sliders. Often the view is blocked by your own hand and setting exact values is almost impossible anyway.
Click to expand...
Click to collapse
A tip for your hand getting in the way: touch the slider with finger/thumb and slide ur finger/thumb down the screen a bit and then you'll see that then when sliding left or right its like your still on the bar but you can now see what your doing!
Sent from my Desire HD using XDA App
I've just installed SetCPU for the first time. Set to smartass and left as 245 and 1036 as set by LeeDroid ROM/Kernel.
Will this increase battery life as opposed to not having Set CPU installed and leaving it as stock?
bluebirds said:
I've just installed SetCPU for the first time. Set to smartass and left as 245 and 1036 as set by LeeDroid ROM/Kernel.
Will this increase battery life as opposed to not having Set CPU installed and leaving it as stock?
Click to expand...
Click to collapse
I find smartass does a better job at reducing the cpu when it's not needed which in turn increases the battery life

Cant UC phone...doesnt save

Im currently on JMT v9, and want to lower my max CPU to 1512Mhz. Ive tried using the included Voltage Control Lite...slide my max freq down to 1512, then hit apply changes. Ive also tried using AnTuTu CPU Master Free...again, slide max down to 1512 and hit Apply. Also set it to apply upon reboot, which I have done, and it goes back to 1728.
Any ideas?
Faux kernel? Download CPU spy. I'm on clones drones, although set CPU doesn't show the changed Max freq, CPU spy shows the phone never goes above what I've set. If that makes sense
Sent from my SGH-T989 using xda premium
Your thread title says under volt but it appears you want to underclock. Try system tuner or ROM toolbox.
Rod3 said:
Your thread title says under volt but it appears you want to underclock. Try system tuner or ROM toolbox.
Click to expand...
Click to collapse
Yes underclock my bad.
Tried system tuner, pulled the slider down to 1512 and it pops right back to 1728 lol
Sent from my SGH-T989 using xda app-developers app
Well i just read in the jmt thread this may be an issue with the kernel...others can't set at 1510 either. 1458 works tho
Sent from my SGH-T989 using xda app-developers app

Help

My phone keeps moving the setting on cpu, it's set for 1.5 to 348mhz but when I back out it goes to 1.5 to 1.3 and my battery been dying so fast I ready factory reset my phone but still happens not running no custom kernel
Sent from my SGH-I747 using xda app-developers app
Are you saying its going from 1.5 to 1.3 as the max or the min? What are you using to adjust these parameters?
The CPU is designed to range from 96Mhz all the way to 2.1 GHz depending on the kernel. Stock is 384 MHz to 1.5 GHz. The CPU with adjust according to load. The real way to see what the CPU is actually doing is to install CPU Spy from the market.
You need to provide the kernel your using, the ROM, if its ICS or JB. You can't be on stock
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
g2tegg said:
Are you saying its going from 1.5 to 1.3 as the max or the min? What are you using to adjust these parameters?
The CPU is designed to range from 96Mhz all the way to 2.1 GHz depending on the kernel. Stock is 384 MHz to 1.5 GHz. The CPU with adjust according to load. The real way to see what the CPU is actually doing is to install CPU Spy from the market.
You need to provide the kernel your using, the ROM, if its ICS or JB. You can't be on stock
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
im trying to set 1.5 to 348 min. but when i set and back out it goes to 1.5 to 1.3 min. im on serenity 1.2 rom and i just flashed ktoonsez kernel to see if it will stick now and it doesnot and im on Jb
Are you using ktweaker to set the values? It comes with the ktoonz kernel. And make sure it has root permissions as well.
Also install the app I mentioned from the play store (free) and see if your phone is going to "deep sleep".
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
g2tegg said:
Are you using ktweaker to set the values? It comes with the ktoonz kernel. And make sure it has root permissions as well.
Also install the app I mentioned from the play store (free) and see if your phone is going to "deep sleep".
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
i did try that ktweaker in that app it says 1.5 to 348 min but in other apps it says1.5 to 1.3 or 1.5 to 1.5 and yes it says deep sleep 4%
You might not have a problem after all. As long as the CPU is scaling from the 1.5 to 384, your phone is running fine.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 05:06 AM ---------- Previous post was at 05:05 AM ----------
Screenshot CPU Spy for me if you don't mind. If I don't respond I past out and will get back to you in the AM lol
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
g2tegg said:
You might not have a problem after all. As long as the CPU is scaling from the 1.5 to 384, your phone is running fine.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 05:06 AM ---------- Previous post was at 05:05 AM ----------
Screenshot CPU Spy for me if you don't mind. If I don't respond I past out and will get back to you in the AM lol
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Sent from my SGH-I747 using xda app-developers app
if you want great battery life do a google search of my signature for the site with this rom or pm me and i will send you the link
g2tegg said:
You might not have a problem after all. As long as the CPU is scaling from the 1.5 to 384, your phone is running fine.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 05:06 AM ---------- Previous post was at 05:05 AM ----------
Screenshot CPU Spy for me if you don't mind. If I don't respond I past out and will get back to you in the AM lol
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Also when my phone goes into deep sleep is that bad?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
htcbrazilian said:
Also when my phone goes into deep sleep is that bad?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
deep sleep means your radio, 3g, wifi etc all pretty much shut off. The only things that 'wake' them up to sync and check email etc are 'wakelocks'.
Your phone shouldn't be in such a high cpu range unless your using an app. My guess is an app wakelock is out of control and forcing your phone to do this. If you are on a ktoonsez kernel or rom go and lock the cpu frequencies at about 918mhz. When you lock frequencies it won't go as high, but the problem of a background app setting off wakelocks won't go away
Get bettery battery stats for bettery results
Be sure to thank me!
zetsui said:
deep sleep means your radio, 3g, wifi etc all pretty much shut off. The only things that 'wake' them up to sync and check email etc are 'wakelocks'.
Your phone shouldn't be in such a high cpu range unless your using an app. My guess is an app wakelock is out of control and forcing your phone to do this. If you are on a ktoonsez kernel or rom go and lock the cpu frequencies at about 918mhz. When you lock frequencies it won't go as high, but the problem of a background app setting off wakelocks won't go away
Get bettery battery stats for bettery results
Be sure to thank me!
Click to expand...
Click to collapse
My phone goes into deep sleep it does not have wake locks problems. My problem is in my set cpu app it says 1.5 to 1.5 min it won't let me stick anything and I just won't back to stock and had to root again and download set cpu again and it says 1.5 to 1.5 min I though maybe it was a rom but it's still doing it idk if it's just the app doing that
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

[Q] Voltage settings

Just curious to see what voltage settings people were using in conjunction with joker's kernel. Screen shots? Post? Whatever. I'm interested!
Sent from my LG-LS970 using xda app-developers app
I'm -50 undervolt a running good. No random reboots or anything. Even played Dead Trigger for an hour and all good. I am also running at 1.62 overclock. All is good.
-Frank
Running 25 under and still good. I'll probably overclock it to get better performance.
frankt2012 said:
I'm -50 undervolt a running good. No random reboots or anything. Even played Dead Trigger for an hour and all good. I am also running at 1.62 overclock. All is good.
-Frank
Click to expand...
Click to collapse
I assume you are -50 on just the highest clock setting?
Sent from my LG-LS970 using xda app-developers app
JeauxAdam said:
I assume you are -50 on just the highest clock setting?
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
No -50 on all clock speeds. I use faux123 from the market. I was running -25 then just bumped it down some more. Might try -75 soon.
-Frank

Categories

Resources