Develop Bugs

[Q] LeeDrOid_2.3d_A2SD install problem

Hi all,
Any help you can provide would be greatly appreciated. New to all of this but I read through the overwhelming info on here before getting started. Successfully rooted via unrevoked, no problems there. SD card was correctly partitioned for A2SD. Trying to install LeeDrOid_2.3d_A2SD via ClockworkMod Recovery v2.5.0.9 & I am getting the following error message.
assert failed: getprop("ro.build/product.device") =="
ll getprop("ro.product.board") == "bravo"
E:Error in /sdcard/LeeDrOid_2.3d_A2SD.zip
(status 7)
Installation aborted.
Not sure what info you need but here is what's listed on Recovery screen:
BRAVO DVT2 SHIP S-OFF
HBOOT-0.98.0000
TOUCH PANEL-SYNT0101
RADIO-2.05.10.08.11
Thanks in advance!

HDHNTER said:
Hi all,
Any help you can provide would be greatly appreciated. New to all of this but I read through the overwhelming info on here before getting started. Successfully rooted via unrevoked, no problems there. SD card was correctly partitioned for A2SD. Trying to install LeeDrOid_2.3d_A2SD via ClockworkMod Recovery v2.5.0.9 & I am getting the following error message.
assert failed: getprop("ro.build/product.device") =="
ll getprop("ro.product.board") == "bravo"
E:Error in /sdcard/LeeDrOid_2.3d_A2SD.zip
(status 7)
Installation aborted.
Not sure what info you need but here is what's listed on Recovery screen:
BRAVO DVT2 SHIP S-OFF
HBOOT-0.98.0000
TOUCH PANEL-SYNT0101
RADIO-2.05.10.08.11
Thanks in advance!
Click to expand...
Click to collapse
Make sure you downloaded the entire file. Ive seen this happen with people that had the file not completely downloaded.
Use MD5 checksums to make sure its the correct file.

Neh doesn't matter you have a CDMA desire. This is not supported by leedroid.
Look in this thread and find a CDMA rom.

Thanks, I had trouble downloading the entire file but the Torrent route seemed to work. Downloading from another source now & trying again. MD5 checksums, is that in the recovery module? This is all new territory for me so please excuse my ignorance.

Thanks Ghost!! Checking out the thread now. Do you have a suggestion for a stable CDMA option? Not looking for anything exotic, A2SD is the main priority with all stock functions still usable.
TheGhost1233 said:
Neh doesn't matter you have a CDMA desire. This is not supported by leedroid.
Look in this thread and find a CDMA rom.
Click to expand...
Click to collapse

[HUGE PROBLEM] Phone doesn't boot!

Before I describe my problem, here are few informations about my phone:
• Unlocked bootloader via htcdev
• SAGA PVT SHIP S-ON RL
• HBOOT 2.00.0002
• RADIO 3822.10.08.04
• Stock ROM T-Mobile PL branded Android 2.3.5 (unfortunatelly messed up )
• Revolutionary CWM 4.0.1.4
So, I wanted to flash CM7 and I got this error:
Code:
--Installing: /sdcard/unofficial-CM7-marvel-nightly-02_26_2012.zip
Finding update package...
Opening update package...
Installing package...
assert failed: getprop("ro.product.device") == "marvel" || getprop("ro.build.product") == "marvel" || getprop("ro.product.board") == "marvel"
E:Error in /sdcard/unofficial-CM7-marvel-nightly-02_26_2012.zip
(Status 7)
Installation aborted.
Someone said that I should wipe before installing ROM, so I wiped data/cache and dalvik cache but I still got the same error. I've found out that I can format system partition in "mounts and storage" so I did it without making backup before... Of course after that error appeared again and moreover I can't boot stock ROM now :/ It freezes at boot image and nothing happens.
I've tried to flash unziped EU Stock ROM from PG76IMG.zip file via flashboot (commands flashboot flash system system.img and flashboot flash boot boot.img). Terminal said that everything is ok, but still freezes at boot image. Strangily flashing userdata.img, rcdata.img, ramdisk.img ends with fail. I really don't know what to do... Putting PG76IMG.zip into root of sdcard and turning device into bootloader mode doesn't work, since bootloader can't see it. Updating via RUU doesn't work too, I've got errors every time...
Please, help me. Is there any chance to fix this issue?

you have the old wildfire not the wildfire s so none of this will work go to the wildfire forums

kagevazquez said:
you have the old wildfire not the wildfire s so none of this will work go to the wildfire forums
Click to expand...
Click to collapse
Nope, it's Wildfire S. I've got touch buttons under screen not trackball as pure Wildfire.

Saga is suppose to be the Desire S

doyeb said:
Nope, it's Wildfire S. I've got touch buttons under screen not trackball as pure Wildfire.
Click to expand...
Click to collapse
Are you sure that it is Wildfire S ? It looks like you have desire s not wildfire s which is very similar to desire s
Sent from somewhere with HTC Wildfire S

Agreed, wildfire s is called marvel and old wildfire(mine) is called buzz. If I was you I would go to shipped roms.com and see if you can find saga, then try on your device.
sent from my ice cream sandwich powered HTC WILDFIRE B-)

go to desire s forums, you will find what you want
Sent from my HTC Wildfire S using Tapatalk

[Q] cannot update cwm 2.5.0.7 to anything at all

Hi there,
well i bricked one SD card in the process so far, not bad
So, here is my problem. I got my RMA Desire back und rooted it with unrevoked. After that installed ginger villain, anyhow i wanted to install myself another ROM which required repartioning sd ext to a larger partition. Smart as I am, I saw that newer versions of cwm can do that for you, so i wanted to update my outdate 2.5.0.7 version to 5.xxxx. Hell it won't work, neither installing via ROM Manager nor installing via cwm itself. Not even via fastboot. No chance there either.
So there i sat, 1 o'clock in the morning and thought why not give some partitioning program a shot, worked fine with my harddrives. this is where i made the fat partition smaller, deleted the ext3 partition since i couldnt resize it, made a 1.6 gig ext3 partition and thought i was king of the hill. yall might know already that i bricked that sd card. Now running on the ****ty 4 gig original one.... that has no ext3 or swap at all.
So, now my question is, how can i update my cwm to something that isnt as outdated as my underwear?! And any way that i could unbrick my fine 16 gig sd card?
thanx in advance and apologies for any grammar or spelling mistakes.
cheers

Are you S-OFF? Please post fastboot output after flashing recovery.
Sent from my HTC Desire using Tapatalk

Even tho i checked security off in phone with unrevoked, s-on states the post in Hboot.....
ahyhow.
Installing CWM_Recovery_5.0.2.3.carebear.jr0dd.zip in recovery gives me:
Code:
assert failed: getprp("ro.product.device") == crespo"
getprop("ro.build.product") == "crespo"
E:Error in /sdcard/CWM_Recovery_5.0.2.3.carebear.jr0dd.zip
Status 7
Installation aborted.
Guessing there should be standing desire not crespo.
Anyhow, trying to flash recovery-clockwork-5.0.2.0-bravo.img or recovery-clockwork-touch-5.8.0.2-bravo.img via fastboot gives me this:
Code:
fastboot flash recovery recovery-clockwork-5.0.2.0-bravo.img
sending 'recovery' (3054 KB)...
OKAY [ 0.440s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.781s

Did you try flashing it again with signature check disabled? Be careful with this tho, if you bootloader gets messed up you phone will be unbrickable... Where did you get the recovery from?

I did try that.
Thanks for pointing me to S-OFF, that was my problem. I used aplharev to get to S-OFF and then flashed via fastboot cwm touch and now it is actually installed.
at the moment cwm is partitioning my sd card. so hopefully my desire will be up and running in the next half hour.
If anyone is having the same problems, feel free to ask.
for now i am happy

[Q] Need help PLEASE

I have unlocked my bootloader, rooted my device, and flashed CWM.
I am trying to install ICS slim 4.2 and I am getting the same error everytime I try to flash the zip file. It looks like this:
assert failed: getprop("ro.product.device")
getprop(ro.build.product) endeavoru
error in sdcard/HOX4.2.zip
Status 7
install aborted
no files found.
I have followed all the steps provided on rom page.
Please can someone help me out?
Thanks

Saint3004 said:
I have unlocked my bootloader, rooted my device, and flashed CWM.
I am trying to install ICS slim 4.2 and I am getting the same error everytime I try to flash the zip file. It looks like this:
assert failed: getprop("ro.product.device")
getprop(ro.build.product) endeavoru
error in sdcard/HOX4.2.zip
Status 7
install aborted
no files found.
I have followed all the steps provided on rom page.
Please can someone help me out?
Thanks
Click to expand...
Click to collapse
download the latest recovery http://download.clockworkmod.com/recoveries/recovery-clockwork-touch-5.8.4.0-endeavoru.img
flash through fastboot. fastboot flash recovery,fastboot erase cache,fastboot flash boot boot.img than rom will work
or open the zip (the ROM)and navigate to META-INF\COM\GOOGLE\ANDROID and extract updater-script, open this up in notepad++ (Regular notepad wont do it, it breaks it) and removed the 3 assert lines.save it and replace that back into the same directory. It should work then

Can't Install CM10 on HTC One X International

Hi All,
I can't install CM10 on my HTC One X (International) version.
This is the error.
Installing: /sdcard/cm-10-20120802-p12-endeavoru.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "endeavoru" | | getprop("ro.build.product") == "endeavoru"
E : Error in /sdcard/cm-10-20120802-p12-endeavoru.zip
(Status 7)
Installation aborted.
Please advise..
TQ.

Bad download? Did you check the md5 before trying to flash?

musangking07 said:
Hi All,
I can't install CM10 on my HTC One X (International) version.
This is the error.
Installing: /sdcard/cm-10-20120802-p12-endeavoru.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "endeavoru" | | getprop("ro.build.product") == "endeavoru"
E : Error in /sdcard/cm-10-20120802-p12-endeavoru.zip
(Status 7)
Installation aborted.
Please advise..
TQ.
Click to expand...
Click to collapse
Have you tried downloading the file again or from a different mirror. Could be an error in the file itself.

musangking07 said:
Hi All,
I can't install CM10 on my HTC One X (International) version.
This is the error.
Installing: /sdcard/cm-10-20120802-p12-endeavoru.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "endeavoru" | | getprop("ro.build.product") == "endeavoru"
E : Error in /sdcard/cm-10-20120802-p12-endeavoru.zip
(Status 7)
Installation aborted.
Please advise..
TQ.
Click to expand...
Click to collapse
Installed cm-10-20120815-a5-endeavoru on my international OneX.

EddyOS said:
Bad download? Did you check the md5 before trying to flash?
Click to expand...
Click to collapse
Yes i did. The md5 is correct.
B3r3av3d said:
Have you tried downloading the file again or from a different mirror. Could be an error in the file itself.
Click to expand...
Click to collapse
I can't find any mirror. Do you have other mirror?
Thanks for your concern.

You should modify the updater-script and remove the part related to the device control at the top, but I don't know if you can do it...
I you need I can do it for you...just post the updater-script under META-INF/Android..
Cheers

Don't modify the script. That check is there for a reason!
What does your phone say in HBOOT? If it is ENDEAVORU, are you sure you've got the right recovery?

Same Issue
I'm having exactly the same issue trying to install Tripnravers CM10 rom.....
Anyone have a solution that I can follow? So frustrating!!

Rusty! said:
Don't modify the script. That check is there for a reason!
What does your phone say in HBOOT? If it is ENDEAVORU, are you sure you've got the right recovery?
Click to expand...
Click to collapse
He is right. Does it say endeavoru or evita?
Sent from my HTC One X using xda premium

here the anwser
open cm-10-20120814-UNOFFICIAL-d2att whit winRar.
go to : META-INF/COM/google/android/updater-script
open /updater-script whit notepad++ and delete the first line. SAVE IT and boot your device whit cm10.
only way i found.

Danger! Don't modify the script. The rom is not designed for your HOX!

Kenia1234 said:
You should modify the updater-script and remove the part related to the device control at the top, but I don't know if you can do it...
I you need I can do it for you...just post the updater-script under META-INF/Android..
Cheers
Click to expand...
Click to collapse
Hi.. I know how to do it. But I'm a bit worry if this will harm my phone. See the comment from Rusty below.
Rusty! said:
Don't modify the script. That check is there for a reason!
What does your phone say in HBOOT? If it is ENDEAVORU, are you sure you've got the right recovery?
Click to expand...
Click to collapse
Hi Rusty.. Yes.. I've got the right version. It's Endeavoru. My HOX is International version. As I know Endeavoru is meant for HOX International. am I right?

oups
michaffm1964 said:
Danger! Don't modify the script. The rom is not designed for your HOX![/QUI
i did that on my GS 3 and it worked and now im running cm10 perfectly
Click to expand...
Click to collapse

musangking07 said:
Hi Rusty.. Yes.. I've got the right version. It's Endeavoru. My HOX is International version. As I know Endeavoru is meant for HOX International. am I right?
Click to expand...
Click to collapse
You are indeed right.
I can only assume the recovery is wrongly identifying the phone, causing the script to fail.

Now I'm able to install the CM10 but when reboot, the phone got stuck. Cannot reboot. I saw from the installation instruction that we need to do something on 'boot.img' but I don't know how to do that.
Please advise.

@Op,
No mention about these in post 1 so I ask if you don't mind.
Did you unlock on HTCDev?
Did you flash Clockworkmod?
Did you flash SuperSU?
Did you flash boot.img?
And last, did you erase cache?
And also important, which CM10 are you trying to flash?

Laurentius26 said:
@Op,
No mention about these in post 1 so I ask if you don't mind.
Did you unlock on HTCDev?
Did you flash Clockworkmod?
Did you flash SuperSU?
Did you flash boot.img?
And last, did you erase cache?
And also important, which CM10 are you trying to flash?
Click to expand...
Click to collapse
Yes I did everything as you mentioned above.
The CM10 that i downloaded is Endeavoru version which is meant for HOX International.

Laurentius26 said:
@Op,
No mention about these in post 1 so I ask if you don't mind.
Did you unlock on HTCDev?
Did you flash Clockworkmod?
Did you flash SuperSU?
Did you flash boot.img?
And last, did you erase cache?
And also important, which CM10 are you trying to flash?
Click to expand...
Click to collapse
musangking07 said:
Yes I did everything as you mentioned above.
The CM10 that i downloaded is Endeavoru version which is meant for HOX International.
Click to expand...
Click to collapse
Are you sure that you've flashed the boot.img from the CM10 zip file?.
musangking07 said:
Now I'm able to install the CM10 but when reboot, the phone got stuck. Cannot reboot. I saw from the installation instruction that we need to do something on 'boot.img' but I don't know how to do that.
Please advise.
Click to expand...
Click to collapse
You indicate here that you do not know how to flash boot.img
This is why you are getting the boot loop.
1. In the CM10 installation zip, "cm-10-20120820-a7-endeavoru.zip" there will be a file called 'boot.img'
2. Extract this file and place it in your fastboot directory. You have fastboot already don't you?.
3. Restart phone in bootloader (Power + vol down)
4. Select fastboot
5. Type these commands "fastboot flash boot boot.img" followed by "fastboot erase cache"
6. Select HBOOT
7. Restart phone.

Laurentius26 said:
@Op,
No mention about these in post 1 so I ask if you don't mind.
Did you unlock on HTCDev?
Did you flash Clockworkmod?
Did you flash SuperSU?
Did you flash boot.img?
And last, did you erase cache?
And also important, which CM10 are you trying to flash?
Click to expand...
Click to collapse
mimik13 said:
Are you sure that you've flashed the boot.img from the CM10 zip file?.
You indicate here that you do not know how to flash boot.img
This is why you are getting the boot loop.
1. In the CM10 installation zip, "cm-10-20120820-a7-endeavoru.zip" there will be a file called 'boot.img'
2. Extract this file and place it in your fastboot directory. You have fastboot already don't you?.
3. Restart phone in bootloader (Power + vol down)
4. Select fastboot
5. Type these commands "fastboot flash boot boot.img" followed by "fastboot erase cache"
6. Select HBOOT
7. Restart phone.
Click to expand...
Click to collapse
Ok.. I'll repeat all the steps and see the result.
Anyway.. Thank you so much.

mimik13 said:
Are you sure that you've flashed the boot.img from the CM10 zip file?.
You indicate here that you do not know how to flash boot.img
This is why you are getting the boot loop.
1. In the CM10 installation zip, "cm-10-20120820-a7-endeavoru.zip" there will be a file called 'boot.img'
2. Extract this file and place it in your fastboot directory. You have fastboot already don't you?.
3. Restart phone in bootloader (Power + vol down)
4. Select fastboot
5. Type these commands "fastboot flash boot boot.img" followed by "fastboot erase cache"
6. Select HBOOT
7. Restart phone.
Click to expand...
Click to collapse
Now I can boot the CM10!!.. thank you very much.