Develop Bugs

[Q] how to check if i am properly ROOTED?

i am a n00b, so bear with me!
i have used XTC CLIP and gained S-OFF, so i see:
MARVEL PVT SHIP S-OFF RL
HBOOT-0.90.000
MICROP-0451
RADIO-7.46.35.08
i then followed this guide: http://forum.xda-developers.com/showthread.php?t=1195275
and did the PG76IMG.zip + root.zip installs
then i used ROM Manager to install ClockworkMod Recovery and then backed-up my phone image.
-- of note, in the ROM Manager when i was installing CWM (5.0.2.0)- it only listed HTC Buzz (Wildfire), so i chose that as my handset...
was this the wrong thing to do?
i also updated superuser and the SU binary.
so - i tried to install a few different ROMs but none worked, mostly with 'status 7' errors?
how do i know what is wrong?
i checked using Root Checker Basic - it said: "Congratulations! This device has root access!"
the ROMS i am trying are:
Cyanogenmod 7.2.0-RC0-marvel-KANG
JikantaruROM_XE_11711
error log:
-- Installing: /sdcard/update-cm-7.2.0-RC0-marvel-KANG-signed.zip
mtd: successfully wrote block at c4b2c00000000
I:Set boot command "boot-recovery"
Finding update package...
I:Update location: /sdcard/update-cm-7.2.0-RC0-marvel-KANG-signed.zip
Opening update package...
Installing update...
script aborted: assert failed: getprop("ro.product.device") == "marvel" || getprop("ro.build.product") == "marvel" || getprop("ro.product.board") == "marvel"
assert failed: getprop("ro.product.device") == "marvel" || getprop("ro.build.product") == "marvel" || getprop("ro.product.board") == "marvel"
E:Error in /sdcard/update-cm-7.2.0-RC0-marvel-KANG-signed.zip
(Status 7)
Installation aborted.
result was NULL, message is: assert failed: install_zip("/sdcard/update-cm-7.2.0-RC0-marvel-KANG-signed.zip")
------------------
i have a feeling i am using the wrong recovery program - but would love some feedback on how to flash a ROM to my phone somehow!

At least you flashed wrong recovery, try from this topic: http://forum.xda-developers.com/showthread.php?t=1439466

flash clockwork mod recovery by alquez, then go boot into recovery, after that put the rom you want on sd card, as a zip, and just install it from the recovery... pm me if u need any help

b02 said:
flash clockwork mod recovery by alquez, then go boot into recovery, after that put the rom you want on sd card, as a zip, and just install it from the recovery... pm me if u need any help
Click to expand...
Click to collapse
i just tried from the above linked thread, when i ran recovery.bat from archive it said:
sending 'recovery' <3820 KB>... OKAY
writing 'recovery'... FAILED <remote: not allowed>
All done have a nice day etc
then when i boot into recovery, i still see:
Recovery v3.2.0.1_xda.cn
is that still the wrong Recovery?

the Superuser + SU binary installed fine... but still cant flash the ROM???
same error as in OP

b02 said:
flash clockwork mod recovery by alquez, then go boot into recovery, after that put the rom you want on sd card, as a zip, and just install it from the recovery... pm me if u need any help
Click to expand...
Click to collapse
ahhhh! yes, this one: http://forum.xda-developers.com/showthread.php?t=1213229
yepppers!
i just installed this one and all problems are solvered!
i have a cool blue android on a skate board loading up right now... wow! time to explore!

Congratulation !

user1829 said:
ahhhh! yes, this one: http://forum.xda-developers.com/showthread.php?t=1213229
yepppers!
i just installed this one and all problems are solvered!
i have a cool blue android on a skate board loading up right now... wow! time to explore!
Click to expand...
Click to collapse
im glad i helped

b02 said:
im glad i helped
Click to expand...
Click to collapse
can you help one step more by pointing me to the best thread describing how to make 1GB+ for apps? using DATA2SD?

On a rom that supports data2sd, like cm 7.2 or jikantaru xe or w/e...
download partition magic (or use any of theese : Best partitioning software), make 1024mb (don't go over it, i have read about some bugs, its enough anyway) ext4 and rest of sd card make fat32, build it in partition magic, then go in options set aplication moving (tick) and choose location to external... and u have it ....
EDIT, i just found other guy wrote this so, but i think it can be used on roms that dont have data2sd, thats whats that installer for i guess
- Make 1GB memory for apps
1. Download cm7.2 port by alquez
2. Download data2sd installer http://www.mediafire.com/?757066a1516tdkt
3. Factory wipe then install cm7
4. Back up SD card
5. In recovery go to advanced -> partition SD card -> 1024mb
6. Install data2sd
7. Boot into cyanogenmod
8. Restore SD card stuff if anything went wrong
9. Enjoy and click thanks to benjamingwynn for his tutorial.
p.s. Make backup of your data card, since you might loose your data if you are partitioning sd card for first time. So once again, backup it.
first one is by me and second is by banjamingwynn as u see ... use the one u like

user1829 said:
can you help one step more by pointing me to the best thread describing how to make 1GB+ for apps? using DATA2SD?
Click to expand...
Click to collapse
You should consider Link2SD as well. In my opinion, the best thread for that on XDA is [TUTORIAL][Link2SD][ROOT] How to prep your SD card for it...Windoze Style. Don't forget to thank d33ps1x if you use it.

CafeKampuchia said:
You should consider Link2SD as well. In my opinion, the best thread for that on XDA is [TUTORIAL][Link2SD][ROOT] How to prep your SD card for it...Windoze Style. Don't forget to thank d33ps1x if you use it.
Click to expand...
Click to collapse
damn - nice tute!!!
wish they were all like that!
will set it up back at home...

Can't Install CM10 on HTC One X International

Hi All,
I can't install CM10 on my HTC One X (International) version.
This is the error.
Installing: /sdcard/cm-10-20120802-p12-endeavoru.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "endeavoru" | | getprop("ro.build.product") == "endeavoru"
E : Error in /sdcard/cm-10-20120802-p12-endeavoru.zip
(Status 7)
Installation aborted.
Please advise..
TQ.

Bad download? Did you check the md5 before trying to flash?

musangking07 said:
Hi All,
I can't install CM10 on my HTC One X (International) version.
This is the error.
Installing: /sdcard/cm-10-20120802-p12-endeavoru.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "endeavoru" | | getprop("ro.build.product") == "endeavoru"
E : Error in /sdcard/cm-10-20120802-p12-endeavoru.zip
(Status 7)
Installation aborted.
Please advise..
TQ.
Click to expand...
Click to collapse
Have you tried downloading the file again or from a different mirror. Could be an error in the file itself.

musangking07 said:
Hi All,
I can't install CM10 on my HTC One X (International) version.
This is the error.
Installing: /sdcard/cm-10-20120802-p12-endeavoru.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "endeavoru" | | getprop("ro.build.product") == "endeavoru"
E : Error in /sdcard/cm-10-20120802-p12-endeavoru.zip
(Status 7)
Installation aborted.
Please advise..
TQ.
Click to expand...
Click to collapse
Installed cm-10-20120815-a5-endeavoru on my international OneX.

EddyOS said:
Bad download? Did you check the md5 before trying to flash?
Click to expand...
Click to collapse
Yes i did. The md5 is correct.
B3r3av3d said:
Have you tried downloading the file again or from a different mirror. Could be an error in the file itself.
Click to expand...
Click to collapse
I can't find any mirror. Do you have other mirror?
Thanks for your concern.

You should modify the updater-script and remove the part related to the device control at the top, but I don't know if you can do it...
I you need I can do it for you...just post the updater-script under META-INF/Android..
Cheers

Don't modify the script. That check is there for a reason!
What does your phone say in HBOOT? If it is ENDEAVORU, are you sure you've got the right recovery?

Same Issue
I'm having exactly the same issue trying to install Tripnravers CM10 rom.....
Anyone have a solution that I can follow? So frustrating!!

Rusty! said:
Don't modify the script. That check is there for a reason!
What does your phone say in HBOOT? If it is ENDEAVORU, are you sure you've got the right recovery?
Click to expand...
Click to collapse
He is right. Does it say endeavoru or evita?
Sent from my HTC One X using xda premium

here the anwser
open cm-10-20120814-UNOFFICIAL-d2att whit winRar.
go to : META-INF/COM/google/android/updater-script
open /updater-script whit notepad++ and delete the first line. SAVE IT and boot your device whit cm10.
only way i found.

Danger! Don't modify the script. The rom is not designed for your HOX!

Kenia1234 said:
You should modify the updater-script and remove the part related to the device control at the top, but I don't know if you can do it...
I you need I can do it for you...just post the updater-script under META-INF/Android..
Cheers
Click to expand...
Click to collapse
Hi.. I know how to do it. But I'm a bit worry if this will harm my phone. See the comment from Rusty below.
Rusty! said:
Don't modify the script. That check is there for a reason!
What does your phone say in HBOOT? If it is ENDEAVORU, are you sure you've got the right recovery?
Click to expand...
Click to collapse
Hi Rusty.. Yes.. I've got the right version. It's Endeavoru. My HOX is International version. As I know Endeavoru is meant for HOX International. am I right?

oups
michaffm1964 said:
Danger! Don't modify the script. The rom is not designed for your HOX![/QUI
i did that on my GS 3 and it worked and now im running cm10 perfectly
Click to expand...
Click to collapse

musangking07 said:
Hi Rusty.. Yes.. I've got the right version. It's Endeavoru. My HOX is International version. As I know Endeavoru is meant for HOX International. am I right?
Click to expand...
Click to collapse
You are indeed right.
I can only assume the recovery is wrongly identifying the phone, causing the script to fail.

Now I'm able to install the CM10 but when reboot, the phone got stuck. Cannot reboot. I saw from the installation instruction that we need to do something on 'boot.img' but I don't know how to do that.
Please advise.

@Op,
No mention about these in post 1 so I ask if you don't mind.
Did you unlock on HTCDev?
Did you flash Clockworkmod?
Did you flash SuperSU?
Did you flash boot.img?
And last, did you erase cache?
And also important, which CM10 are you trying to flash?

Laurentius26 said:
@Op,
No mention about these in post 1 so I ask if you don't mind.
Did you unlock on HTCDev?
Did you flash Clockworkmod?
Did you flash SuperSU?
Did you flash boot.img?
And last, did you erase cache?
And also important, which CM10 are you trying to flash?
Click to expand...
Click to collapse
Yes I did everything as you mentioned above.
The CM10 that i downloaded is Endeavoru version which is meant for HOX International.

Laurentius26 said:
@Op,
No mention about these in post 1 so I ask if you don't mind.
Did you unlock on HTCDev?
Did you flash Clockworkmod?
Did you flash SuperSU?
Did you flash boot.img?
And last, did you erase cache?
And also important, which CM10 are you trying to flash?
Click to expand...
Click to collapse
musangking07 said:
Yes I did everything as you mentioned above.
The CM10 that i downloaded is Endeavoru version which is meant for HOX International.
Click to expand...
Click to collapse
Are you sure that you've flashed the boot.img from the CM10 zip file?.
musangking07 said:
Now I'm able to install the CM10 but when reboot, the phone got stuck. Cannot reboot. I saw from the installation instruction that we need to do something on 'boot.img' but I don't know how to do that.
Please advise.
Click to expand...
Click to collapse
You indicate here that you do not know how to flash boot.img
This is why you are getting the boot loop.
1. In the CM10 installation zip, "cm-10-20120820-a7-endeavoru.zip" there will be a file called 'boot.img'
2. Extract this file and place it in your fastboot directory. You have fastboot already don't you?.
3. Restart phone in bootloader (Power + vol down)
4. Select fastboot
5. Type these commands "fastboot flash boot boot.img" followed by "fastboot erase cache"
6. Select HBOOT
7. Restart phone.

Laurentius26 said:
@Op,
No mention about these in post 1 so I ask if you don't mind.
Did you unlock on HTCDev?
Did you flash Clockworkmod?
Did you flash SuperSU?
Did you flash boot.img?
And last, did you erase cache?
And also important, which CM10 are you trying to flash?
Click to expand...
Click to collapse
mimik13 said:
Are you sure that you've flashed the boot.img from the CM10 zip file?.
You indicate here that you do not know how to flash boot.img
This is why you are getting the boot loop.
1. In the CM10 installation zip, "cm-10-20120820-a7-endeavoru.zip" there will be a file called 'boot.img'
2. Extract this file and place it in your fastboot directory. You have fastboot already don't you?.
3. Restart phone in bootloader (Power + vol down)
4. Select fastboot
5. Type these commands "fastboot flash boot boot.img" followed by "fastboot erase cache"
6. Select HBOOT
7. Restart phone.
Click to expand...
Click to collapse
Ok.. I'll repeat all the steps and see the result.
Anyway.. Thank you so much.

mimik13 said:
Are you sure that you've flashed the boot.img from the CM10 zip file?.
You indicate here that you do not know how to flash boot.img
This is why you are getting the boot loop.
1. In the CM10 installation zip, "cm-10-20120820-a7-endeavoru.zip" there will be a file called 'boot.img'
2. Extract this file and place it in your fastboot directory. You have fastboot already don't you?.
3. Restart phone in bootloader (Power + vol down)
4. Select fastboot
5. Type these commands "fastboot flash boot boot.img" followed by "fastboot erase cache"
6. Select HBOOT
7. Restart phone.
Click to expand...
Click to collapse
Now I can boot the CM10!!.. thank you very much.

[Q] failed upgrade to CM 11 now can't install any ROM

Hello everyone,
I some how manage to mess something up and can't figure it out. I had CM10.1 installed on my ATT One X and decided to got ahead and get 11. did my back up and was ready to go. In any case the upgrade failed, I read several post regarding S-Off and such, and decided to proceed trying.
stupidly i did a factory reset while in the bootloader so there went everything. I have adb access and access to recovery, i remember when i used to play with the One X that you always need to get flash the boot.img in order to get your room to work but now i can't get any room to install. I have read several threads but none has gotten me anywhere.
The error i get while trying to install is
Updating partition details...
Full SELinux support is present.
Installing '/sdcard/cm-10.2.1-evita.zip'...
Checkinf for MD5 file...4Skipping MD5 check: no MD5 file found.
assert failed: getprop ("ro.product.device") == "
E:Error executing updater binary in zip '/sdcard
Error flashing zip '/sdcard/cm-10.2.1-evita.zip'
Updating partition details...
Failed
Click to expand...
Click to collapse
i am trying to get 10.2 installed at the moment, i have HBOOT 1.14.0002, TWRP 2.6.3
modelid PJ8310000
cidnum 1111111
any help will be greatly appreciated.
***************************
Sorry i just realized i put this in the wrong One X thread, could a mod move it to AT&T One X thread
Thank you.

deleted........didn't read the edit.

[Q] need help to restore to GPE stock rom

Hello, I'm new to HTC phone. I can't enter system now. Please help!.
my phone's information:
CID: GOOGL001
ROM: Google stock 4.4.2
Recovery: CMW latest.
bootloader: unlocked.
SHIP-s: ON
What I did:
I copied the stock google rom 4.4.3.zip to the internal sd card, and use recovery installed the zip file. then reboot,
current status:
the phone can't enter the system, it enters the recovery everytime reboot.
I can enter the bootloader
PC can do fastboot,and adb commands, PC can find the phone.
What I want now is to restore to the unrooted GPE stock ROM 4.4.3. What shall I do now.
thanks,

heartready said:
Hello, I'm new to HTC phone. I can't enter system now. Please help!.
my phone's information:
CID: GOOGL001
ROM: Google stock 4.4.2
Recovery: CMW latest.
bootloader: unlocked.
SHIP-s: ON
What I did:
I copied the stock google rom 4.4.3.zip to the internal sd card, and use recovery installed the zip file. then reboot,
current status:
the phone can't enter the system, it enters the recovery everytime reboot.
I can enter the bootloader
PC can do fastboot,and adb commands, PC can find the phone.
What I want now is to restore to the unrooted GPE stock ROM 4.4.3. What shall I do now.
thanks,
Click to expand...
Click to collapse
Did you flash the Ruu?you can follow this guide:http://forum.xda-developers.com/showthread.php?t=2706441

Jyotirdeb said:
Did you flash the Ruu?you can follow this guide:http://forum.xda-developers.com/showthread.php?t=2706441
Click to expand...
Click to collapse
Thanks, I think I did use fastboot oem rebootRUU and flash the RUU google edtion conversion following the thread http://forum.xda-developers.com/showthread.php?t=2708589 but it's failed. and then I tried flash the zip in the thread you just mentioned, still failed. got an error message and installation aborted. the following msg is the one I use cwm flash the zip in recovery:
-- Erasing & formatting /system as ext4 (Unmounted system)
system partition formatted!
-- Mounting system partition for writing
Writing rom system to system partition
Rom system written successfully! @symlinking and permissions
--Creating toolbox symlinks
--creating additional symlinks
Symlinks Set!
--installing busybox
Set_perm: some changes failed
E:Error in /tmp/update.zip
(status 7)
installation aborted.

I tried factory reset, and wipe everything, flash the gpe4.4.3_m8 zip, still failed. I have used, phil cwm recovery and twrp recovery.
thanks,

Flashing ROM In CWM Aborts

I'm trying to flash 4.4.4 onto my Wildfire S and before flashing it I added and removed .apk files and changed the bootloader image so that I could customise it to my liking. The problem I've got is that I get the following message on my modified ROM
E: footer is wrong
E: signature verification failed
Installation aborted.
Of course this only occurs on the modified ROMS. When I use the developers original ROM everything is fine.
Any help will be appreciated
Will