Develop Bugs

USB Problem

I have formatted my desktop computer few days back and since then I cant connect my One X to my PC
I have searched all the thread but cant find a solution to my problem therefor I am creating this new thread..
Here are the points
1) Installed latest HTC drivers
2) My other phone gets connected without any problem that means only my one x is having the problem
3) I am using kitkat aosp rom maybe thats why my computer cant detect the phone
4) When I connect my phone to computer, it starts to install the drivers. All drivers get installed successfully except "Android Phone" and device manager shows Android Phone with a yellow exclamation mark.
5) adb commands dont show any device connected.
6) I tried to enable and disable usb debugging
7) I tried to boot into bootloader and then fastboot commands work (I tried erase cache and devices commands)
8) So is there any way I can use adb commands from my computer while my phone is booted ?

try this
1)disable debug mode then connect your phone and mount sd card
2)if above step doesnt work,enable debug mode,connect your phone,mount sd card then disable debug mode.
or
3)mount sd card from recovery
or
4)use sense rom

since I flashed kitkat rom, i have to disable usb debugging before clicking 'turn on usb storage'. Only then my pc will detect my phone

mr93 said:
since I flashed kitkat rom, i have to disable usb debugging before clicking 'turn on usb storage'. Only then my pc will detect my phone
Click to expand...
Click to collapse
Poojan Patel said:
try this
1)disable debug mode then connect your phone and mount sd card
2)if above step doesnt work,enable debug mode,connect your phone,mount sd card then disable debug mode.
or
3)mount sd card from recovery
or
4)use sense rom
Click to expand...
Click to collapse
Actually USB mass storage works without any problem. I disable usb debugging and usb mass storage works.. I am not having any problem with that. My problem is that I cant use adb commands on my phone since adb cant detect my phone...

a.broken.star said:
Actually USB mass storage works without any problem. I disable usb debugging and usb mass storage works.. I am not having any problem with that. My problem is that I cant use adb commands on my phone since adb cant detect my phone...
Click to expand...
Click to collapse
Me too. adb doesn't detect my phone after kitkat. But I don't use adb that much. Do let me know anyways if there's any solution

mr93 said:
Me too. adb doesn't detect my phone after kitkat. But I don't use adb that much. Do let me know anyways if there's any solution
Click to expand...
Click to collapse
okies.. i am trying to find a solution....

a.broken.star said:
okies.. i am trying to find a solution....
Click to expand...
Click to collapse
Try look for latest adb/fastboot driver. Or install android sdk tools if it help.
Reference : http://forum.xda-developers.com/showthread.php?t=2529803
Sent from my HTC One X using Tapatalk

audahadi said:
Try look for latest adb/fastboot driver. Or install android sdk tools if it help.
Reference : http://forum.xda-developers.com/showthread.php?t=2529803
Sent from my HTC One X using Tapatalk
Click to expand...
Click to collapse
It looks like it will work.. i'll try this today..

WOW !! It worked... Thanx a lot @audahadi
I dont know how to thank you.. You are genius bro !!

a.broken.star said:
WOW !! It worked... Thanx a lot @audahadi
I dont know how to thank you.. You are genius bro !!
Click to expand...
Click to collapse
Gotta try that, I have the same problem. ADB over wifi works fine, and so does fastboot with the cable connected.
Sent from my One X using Tapatalk

And for those who google here and want another run for a solution to ADB troubles: http://adbdriver.com/. Thanks to @and313 and this post in the General section:
http://forum.xda-developers.com/showpost.php?p=50303554&postcount=1

Problem driver, i try all !

All is in the title. At the beginning I can plug my device to my Pc and drop videos, music etc
But I change ROM and now I try to uninstall driver in usbdeview with the help of NRT but the only thing i can do.is to plug in ptp and not mtp..
Thanks for the help
Sent from my Nexus 7 using xda app-developers app

nathan30 said:
All is in the title. At the beginning I can plug my device to my Pc and drop videos, music etc
But I change ROM and now I try to uninstall driver in usbdeview with the help of NRT but the only thing i can do.is to plug in ptp and not mtp..
Thanks for the help
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Settings > storage > click three dots on upper right corner of screen > click USB connection > select MTP > profit.
Sent from my Nexus 7 Flo running Odex SinLess ROM 4.4.2 with ElementalX kernel using XDA Premium 4 mobile app

LinearEquation said:
Settings > storage > click three dots on upper right corner of screen > click USB connection > select MTP > profit.
Sent from my Nexus 7 Flo running Odex SinLess ROM 4.4.2 with ElementalX kernel using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Already try and not working..

Up ?..

I use window 7 but i never have to install driver to get the storage working (except for adb, fastboot driver). Which window do you use?
P/s: Also check if the usb port is working properly :good:

dichton said:
I use window 7 but i never have to install driver to get the storage working (except for adb, fastboot driver). Which window do you use?
P/s: Also check if the usb port is working properly :good:
Click to expand...
Click to collapse
I used W8.1
But first time I used the N7 I can drag&drop with Paranoid ROM, and after other flash I can't connect properly. I re try with the same ROM and the same problem is here..
I try 3 USB ports

maybe you should checking your pc to other problems
dichton said:
I use window 7 but i never have to install driver to get the storage working (except for adb, fastboot driver). Which window do you use?
P/s: Also check if the usb port is working properly :good:
Click to expand...
Click to collapse
I use the Win7 too，but I did not encounter this problem
.......Damn verification code

nathan30 said:
All is in the title. At the beginning I can plug my device to my Pc and drop videos, music etc
But I change ROM and now I try to uninstall driver in usbdeview with the help of NRT but the only thing i can do.is to plug in ptp and not mtp..
Thanks for the help
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
As said before you have to go into Storage>The 3 Dots Menu> Enable MTP
But after you must go into Developer Options (Enable by going into "About Tablet" and tapping the Build Number 7 times) and Disable USB Debugging
Reconnect the USB and you will now be able to transfer files again

rap3rman said:
As said before you have to go into Storage>The 3 Dots Menu> Enable MTP
But after you must go into Developer Options (Enable by going into "About Tablet" and tapping the Build Number 7 times) and Disable USB Debugging
Reconnect the USB and you will now be able to transfer files again
Click to expand...
Click to collapse
I do that, but I have the same problem again..

Help me Help me huhu

I can not connect note 4 to my computer
I do not understand why. MTP does not show up. It is only charged only
I am very sad for it help me thank you so much

lymada said:
I can not connect note 4 to my computer
I do not understand why. MTP does not show up. It is only charged only
I am very sad for it help me thank you so much
Click to expand...
Click to collapse
Do you have the samsung usb drivers installed on your computer?

dhplap said:
Do you have the samsung usb drivers installed on your computer?
Click to expand...
Click to collapse
yes. i have installed http://developer.samsung.com/technical-doc/view.do?v=T000000117

lymada said:
yes. i have installed http://developer.samsung.com/technical-doc/view.do?v=T000000117
Click to expand...
Click to collapse
Do you have usb debugging enabled? If not try that

dhplap said:
Do you have usb debugging enabled? If not try that
Click to expand...
Click to collapse
yes sir i have usb debugging enabled

anyone help me please !!!

JUST DIAL *#0808# to enable MTP. Or just go to Settings > Storage >click three dots in top right > USB connection mode > Select MTP.
If it does work, what's your android version?
*Go to Settings/Developer options/select USB settings/MTP.

Are you using the USB cable that came with your phone? Try a different cable as well.
Sent from my SM-N910V using Tapatalk

Kernel with enabled adb

Hello, it has someone Kernel with automatically enabled ADB and debugging usb in default.Prop? Display does not work and I can not enable these options and need to recover files.

OTG
DonCorleone94 said:
Hello, it has someone Kernel with automatically enabled ADB and debugging usb in default.Prop? Display does not work and I can not enable these options and need to recover files.
Click to expand...
Click to collapse
use mouse with otg adapter

MaDaLiNoSt said:
use mouse with otg adapter
Click to expand...
Click to collapse
nothing is visible on the screen it is black

DonCorleone94 said:
nothing is visible on the screen it is black
Click to expand...
Click to collapse
then how do you think you will be able to flash a custom kernel?

if you have pin unlock use this for reference to try to unlock the phone:

I wanted to do this on the eye: d thank you for the screen photos

DonCorleone94 said:
Hello, it has someone Kernel with automatically enabled ADB and debugging usb in default.Prop? Display does not work and I can not enable these options and need to recover files.
Click to expand...
Click to collapse
Next time, set up adb and screensharing with your computer.
Sent from my SM-A520W using XDA Labs

usb tethering

After connected to computer usb tethering option not enabling ,plzz help

vickyfule said:
After connected to computer usb tethering option not enabling ,plzz help
Click to expand...
Click to collapse
Turn on USB debugging and check..
Sent from my Z2 Plus using Tapatalk

vickyfule said:
After connected to computer usb tethering option not enabling ,plzz help
Click to expand...
Click to collapse
Or you can enable it by clicking option available in developer option as 'select usb configuration'.