I have formatted my desktop computer few days back and since then I cant connect my One X to my PC
I have searched all the thread but cant find a solution to my problem therefor I am creating this new thread..
Here are the points
1) Installed latest HTC drivers
2) My other phone gets connected without any problem that means only my one x is having the problem
3) I am using kitkat aosp rom maybe thats why my computer cant detect the phone
4) When I connect my phone to computer, it starts to install the drivers. All drivers get installed successfully except "Android Phone" and device manager shows Android Phone with a yellow exclamation mark.
5) adb commands dont show any device connected.
6) I tried to enable and disable usb debugging
7) I tried to boot into bootloader and then fastboot commands work (I tried erase cache and devices commands)
8) So is there any way I can use adb commands from my computer while my phone is booted ?
try this
1)disable debug mode then connect your phone and mount sd card
2)if above step doesnt work,enable debug mode,connect your phone,mount sd card then disable debug mode.
or
3)mount sd card from recovery
or
4)use sense rom
since I flashed kitkat rom, i have to disable usb debugging before clicking 'turn on usb storage'. Only then my pc will detect my phone
mr93 said:
since I flashed kitkat rom, i have to disable usb debugging before clicking 'turn on usb storage'. Only then my pc will detect my phone
Click to expand...
Click to collapse
Poojan Patel said:
try this
1)disable debug mode then connect your phone and mount sd card
2)if above step doesnt work,enable debug mode,connect your phone,mount sd card then disable debug mode.
or
3)mount sd card from recovery
or
4)use sense rom
Click to expand...
Click to collapse
Actually USB mass storage works without any problem. I disable usb debugging and usb mass storage works.. I am not having any problem with that. My problem is that I cant use adb commands on my phone since adb cant detect my phone...
a.broken.star said:
Actually USB mass storage works without any problem. I disable usb debugging and usb mass storage works.. I am not having any problem with that. My problem is that I cant use adb commands on my phone since adb cant detect my phone...
Click to expand...
Click to collapse
Me too. adb doesn't detect my phone after kitkat. But I don't use adb that much. Do let me know anyways if there's any solution
mr93 said:
Me too. adb doesn't detect my phone after kitkat. But I don't use adb that much. Do let me know anyways if there's any solution
Click to expand...
Click to collapse
okies.. i am trying to find a solution....
a.broken.star said:
okies.. i am trying to find a solution....
Click to expand...
Click to collapse
Try look for latest adb/fastboot driver. Or install android sdk tools if it help.
Reference : http://forum.xda-developers.com/showthread.php?t=2529803
Sent from my HTC One X using Tapatalk
audahadi said:
Try look for latest adb/fastboot driver. Or install android sdk tools if it help.
Reference : http://forum.xda-developers.com/showthread.php?t=2529803
Sent from my HTC One X using Tapatalk
Click to expand...
Click to collapse
It looks like it will work.. i'll try this today..
WOW !! It worked... Thanx a lot @audahadi
I dont know how to thank you.. You are genius bro !!
a.broken.star said:
WOW !! It worked... Thanx a lot @audahadi
I dont know how to thank you.. You are genius bro !!
Click to expand...
Click to collapse
Gotta try that, I have the same problem. ADB over wifi works fine, and so does fastboot with the cable connected.
Sent from my One X using Tapatalk
And for those who google here and want another run for a solution to ADB troubles: http://adbdriver.com/. Thanks to @and313 and this post in the General section:
http://forum.xda-developers.com/showpost.php?p=50303554&postcount=1
Related
As the title, when I connect my phone with pc via usb, boot into recovery, the computer cant detect any hardware, so I cant mount sdcard, cant mount system, cant adb connect to my phone in recovery mode
I try with my friend's phone with the same rom, same recovery img and it's [email protected]@
yelliver said:
As the title, when I connect my phone with pc via usb, boot into recovery, the computer cant detect any hardware, so I cant mount sdcard, cant mount system, cant adb connect to my phone in recovery mode
I try with my friend's phone with the same rom, same recovery img and it's [email protected]@
Click to expand...
Click to collapse
Are you install driver properly?
I said I tried with another LU6200 phone of my friend on my PC and it work [email protected]@
Did you enable USB Debugging and Unknown Sources?
devcon69 said:
Did you enable USB Debugging and Unknown Sources?
Click to expand...
Click to collapse
it's in recovery mode, not in normal phone running
I have to repeat that I do the same with other lu6200 phone and it worked
maybe a unique problem with my own phone
yelliver said:
As the title, when I connect my phone with pc via usb, boot into recovery, the computer cant detect any hardware, so I cant mount sdcard, cant mount system, cant adb connect to my phone in recovery mode
I try with my friend's phone with the same rom, same recovery img and it's [email protected]@
Click to expand...
Click to collapse
dude download or update ur lg drivers...
Reset your phone then update LG drivers.
Chipmunk888 said:
Reset your phone then update LG drivers.
Click to expand...
Click to collapse
reset, reflash ton of roms, not efficient
I think driver doesnt play a role in this, with a non driver install PC I still can mount sdcard as removable disk drive with other phone
maybe a hardware problem?
yelliver said:
reset, reflash ton of roms, not efficient
I think driver doesnt play a role in this, with a non driver install PC I still can mount sdcard as removable disk drive with other phone
maybe a hardware problem?
Click to expand...
Click to collapse
One thing you can do is that when you plug your phone ... delete all all the devices with "Q" on it in your computer device manager.
then unplug and try plugging back.
sometime happens when window install other drivers for one device it stay stuck with it until you manually delete those drivers. Maybe thats the case. Your friends device id is configured with right drivers. You can also switch to another computer and install drivers there and check.
aatish said:
One thing you can do is that when you plug your phone ... delete all all the devices with "Q" on it in your computer device manager.
then unplug and try plugging back.
sometime happens when window install other drivers for one device it stay stuck with it until you manually delete those drivers. Maybe thats the case. Your friends device id is configured with right drivers. You can also switch to another computer and install drivers there and check.
Click to expand...
Click to collapse
I have to confirm once more that this problem is not driver problems because it's not necessary driver when mount sdcard (test with other lu6200, other android model with non-driver PC)
I think my problem is hardware error or some wrong IMG is flashed in one strange partition (not system.img or baseband.img etc...) during my massing times of flash new rom
i have rooted wildfire s (marvel).from somedays i have mass storage problem in my device.like when i connected to my laptop its not detected my sdcard.and also it didnt detect htc sync.if i on usb debugging then my device ll show mass storage.and i have stock rom 2.3.5
so please help me to solve problem.i did all things like reseting phone,format sdcard and all things.i have many other phones but only this android couldnt detected please help
crossfire77 said:
i have rooted wildfire s (marvel).from somedays i have mass storage problem in my device.like when i connected to my laptop its not detected my sdcard.and also it didnt detect htc sync.if i on usb debugging then my device ll show mass storage.and i have stock rom 2.3.5
so please help me to solve problem.i did all things like reseting phone,format sdcard and all things.i have many other phones but only this android couldnt detected please help
Click to expand...
Click to collapse
Go To Settings>Connect To PC> Default Action>Set It to Mass Storage>Untick Ask Me Option
Press Thanx If I Helped
fireworker said:
Go To Settings>Connect To PC> Default Action>Set It to Mass Storage>Untick Ask Me Option
Press Thanx If I Helped
Click to expand...
Click to collapse
not working
First of all check the wire and port. Maybe something is loose?
Second: Go to device manager, does it find the phone there? If it does, right click on it and select uninstall. Then disconnect the device and reboot. When it's rebooted attach the device again.
sukhjit321 said:
First of all check the wire and port. Maybe something is loose?
Second: Go to device manager, does it find the phone there? If it does, right click on it and select uninstall. Then disconnect the device and reboot. When it's rebooted attach the device again.
Click to expand...
Click to collapse
not working
crossfire77 said:
not working
Click to expand...
Click to collapse
Does it show in device manager?
sukhjit321 said:
Does it show in device manager?
Click to expand...
Click to collapse
yeah it shows in device manager as "usb mass storage" but its not shows me my memory card in computer.when i on usb debugging then it ll mount sd card.and if i choose htc sync there comes a error.
fail to mount/unmount device storage card(1020).
in all cases i have to on usb debugging then it ll show me my device.
.
Hello guys, first of all i wanna thank u for your work, i'm a new user but i follow you by a really some times. Today i decided to install the 4.2.1 ROM on my nexus, i deleted all internal file in recovery mode but now when i connect the telephone on pc it doesn't work, maybe because the usb debugging is off and now i don't have any rom on my cellular phone. The problem is that i can't browse my telephone because my pc don't recognize it. i tryed to install some usb driver but nothing has worked then i can put in the now or old rom. how i can solved this problem? Thank u ( and sorry for my english )
NexusPsy said:
Hello guys, first of all i wanna thank u for your work, i'm a new user but i follow you by a really some times. Today i decided to install the 4.2.1 ROM on my nexus, i deleted all internal file in recovery mode but now when i connect the telephone on pc it doesn't work, maybe because the usb debugging is off and now i don't have any rom on my cellular phone. The problem is that i can't browse my telephone because my pc don't recognize it. i tryed to install some usb driver but nothing has worked then i can put in the now or old rom. how i can solved this problem? Thank u ( and sorry for my english )
Click to expand...
Click to collapse
To enable USB debugging, go to settings>about phone>tap on the build number 7 times. It will tell you "you are now a developer" and your will have USB debugging back
As far as your driver issues go, it sounds like you only installed fastboot drivers and not the regular drivers. Or somehow the regular drivers got deleted. If it was me, I would try rebooting my computer and phone. If that doesn't work, run the driver setup wizard in the Galaxy Nexus Toolkit. The first part of that process is deleting old drivers. It does a very thorough walkthrough on how to do that.
rudeguy said:
To enable USB debugging, go to settings>about phone>tap on the build number 7 times. It will tell you "you are now a developer" and your will have USB debugging back
As far as your driver issues go, it sounds like you only installed fastboot drivers and not the regular drivers. Or somehow the regular drivers got deleted. If it was me, I would try rebooting my computer and phone. If that doesn't work, run the driver setup wizard in the Galaxy Nexus Toolkit. The first part of that process is deleting old drivers. It does a very thorough walkthrough on how to do that.
Click to expand...
Click to collapse
Thanks for the answer, the problem is that i don't have any rom on my telephone atm then i can't go to settings ecc. is there a way to change the usb debugging in recovery mode?
NexusPsy said:
Thanks for the answer, the problem is that i don't have any rom on my telephone atm then i can't go to settings ecc. is there a way to change the usb debugging in recovery mode?
Click to expand...
Click to collapse
so you are running stock 4.2.1?
Or...I guess I'm not understand what condition your phone is currently in.
NexusPsy said:
Thanks for the answer, the problem is that i don't have any rom on my telephone atm then i can't go to settings ecc. is there a way to change the usb debugging in recovery mode?
Click to expand...
Click to collapse
Try connecting your GNex to PC while in recovery mode then use ADB to push any ROM from PC to your /sdcard/ of your GNex in order to flash it.
At worst case, I think you can use a fastboot image to flash your GNex via fastboot.
rudeguy said:
so you are running stock 4.2.1?
Or...I guess I'm not understand what condition your phone is currently in.
Click to expand...
Click to collapse
Now i running nothing, pratically i formatted all internal data because i would use the 4.2.1 version that is on my pc, after the format the computer does not recognize my cellular phone, so atm i don't have any rom on my phone and now i don't know how i can solve that, it could be easy if i can browse the phone on computer
ahmadallica said:
Try connecting your GNex to PC while in recovery mode then use ADB to push any ROM from PC to your /sdcard/ of your GNex in order to flash it.
At worst case, I think you can use a fastboot image to flash your GNex via fastboot.
Click to expand...
Click to collapse
It works, thank u < 3
Soft bricked(?) my phone. I've got no ROM installed and No ROM/backup on my SD card.my laptop doesnt detect my phone even after re-installing USB device driver (error MTP USB device).
Now I want to use ADB Sideload to push a ROM into my SD card in recovery.
Unfortunately it seems like USB Debugging isn't turned on, it can't find my device.
Is there anyway to turn it on in recovery/ TWRP? any other way to bring back to life?
blinkjona said:
Soft bricked(?) my phone. I've got no ROM installed and No ROM/backup on my SD card.my laptop doesnt detect my phone even after re-installing USB device driver (error MTP USB device).
Now I want to use ADB Sideload to push a ROM into my SD card in recovery.
Unfortunately it seems like USB Debugging isn't turned on, it can't find my device.
Is there anyway to turn it on in recovery/ TWRP? any other way to bring back to life?
Click to expand...
Click to collapse
Maybe fastboot. Try this to keep your data: http://forum.xda-developers.com/showthread.php?t=2377307
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
Maybe fastboot. Try this to keep your data: http://forum.xda-developers.com/showthread.php?t=2377307
Click to expand...
Click to collapse
Thanks, problem is USB debugging is not enabled :crying:
I think your problem is incorrect drivers, uninstall your current driver and install this
blinkjona said:
Thanks, problem is USB debugging is not enabled :crying:
Click to expand...
Click to collapse
fastboot has nothing to do with ADB.
thanks a bunch
there's a return to stock thread in general. use that.
Hi......
My PC & my laptop won't recognise my phone despite several failed attempts! No mass storage no fastboot, nothing! not even when i mount it via recovery! Android debugging is checked.
My phone is on CM10.1.3
Pls help!
saleh9416 said:
Hi......
My PC & my laptop won't recognise my phone despite several failed attempts! No mass storage no fastboot, nothing! not even when i mount it via recovery! Android debugging is checked.
My phone is on CM10.1.3
Pls help!
Click to expand...
Click to collapse
When you start in bootloader and choise fastboot and connect the phone what you see in device manager. Are you install latest drivers. Are you try only in Windoes7, try on XP. Are you change the cable maybe is broken.
This with RED letter is important first try change the cable
Thant said:
When you start in bootloader and choise fastboot and connect the phone what you see in device manager. Are you install latest drivers. Are you try only in Windoes7, try on XP. Are you change the cable maybe is broken.
This with RED letter is important first try change the cable
Click to expand...
Click to collapse
"Fastboot usb" but when i try to flash kernel or erase cache it gives me <waiting for device>! i should mention that everything used to work perfectely a while ago!
and yes i've tried with W7 & XP and with different cables, but nothing changed! only charging.
saleh9416 said:
"Fastboot usb" but when i try to flash kernel or erase cache it gives me <waiting for device>! i should mention that everything used to work perfectely a while ago!
and yes i've tried with W7 & XP and with different cables, but nothing changed! only charging.
Click to expand...
Click to collapse
Are you using the stock cable and is the usb port your using a 2.0 port? if not then it wont work or well it might but not stable.
saleh9416 said:
"Fastboot usb" but when i try to flash kernel or erase cache it gives me <waiting for device>! i should mention that everything used to work perfectely a while ago!
and yes i've tried with W7 & XP and with different cables, but nothing changed! only charging.
Click to expand...
Click to collapse
Change the cable first!!!! Are you tried with different cable?
fader910 said:
Are you using the stock cable and is the usb port your using a 2.0 port? if not then it wont work or well it might but not stable.
Click to expand...
Click to collapse
Yes, and i don't think that would make any difference! cause if it was "1.1 port" it would work but slower!
Thant said:
Change the cable first!!!! Are you tried with different cable?
Click to expand...
Click to collapse
I've mentioned that i used different cables! htc/sony/samsung
saleh9416 said:
Yes, and i don't think that would make any difference! cause if it was "1.1 port" it would work but slower!
I've mentioned that i used different cables! htc/sony/samsung
Click to expand...
Click to collapse
then if you have the latest drivers and no working again you have hardware problem with the USB port on your hox,
Thant said:
then if you have the latest drivers and no working again you have hardware problem with the USB port on your hox,
Click to expand...
Click to collapse
I hope not! and the confusing part is the phone charges via the USB port!
Thanks anyway.
saleh9416 said:
I hope not! and the confusing part is the phone charges via the USB port!
Thanks anyway.
Click to expand...
Click to collapse
Yes your power pin 1 and 5 work. your pin 2 Tx(from phone to computer) not work and pin 3 Rx(from Phone to computer)work.And for this you see your device fastboot usb becouse the phone receive from computer and know to go in fastboot usb but when you send command from computer fastboot getvar all the computer wait for response from the phone but your Tx is broken and you see waiting for device.
Please try to run the comand fastboot reboot-bootloader and report back
saleh9416 said:
Hi......
My PC & my laptop won't recognise my phone despite several failed attempts! No mass storage no fastboot, nothing! not even when i mount it via recovery! Android debugging is checked.
My phone is on CM10.1.3
Pls help!
Click to expand...
Click to collapse
hello! I had the same issue recently, so I solved it by next actions: I typed in the Windows command line(cmd.exe) 'pnputils -e', so I could see all drivers I have installed and their 'oem*.inf' files. I had 4 HTC drivers, it was like they were in a conflict. Then I deleted each driver with next command: 'pnputils -f -d <oem file name>.inf'. So after that, I plugged in the cable and the HOX was recognized by the computer!
Report back if that helped you!
Thant said:
Yes your power pin 1 and 5 work. your pin 2 Tx(from phone to computer) not work and pin 3 Rx(from Phone to computer)work.And for this you see your device fastboot usb becouse the phone receive from computer and know to go in fastboot usb but when you send command from computer fastboot getvar all the computer wait for response from the phone but your Tx is broken and you see waiting for device.
Please try to run the comand fastboot reboot-bootloader and report back
Click to expand...
Click to collapse
The same message "waiting for device"
saleh9416 said:
The same message "waiting for device"
Click to expand...
Click to collapse
Try the metod on @Timofey_K
Wich recovery are you using? Try enter from there, mount the Phone as mass storage from recovery
Sent from my HTC One X using xda premium
matitorres07 said:
Wich recovery are you using? Try enter from there, mount the Phone as mass storage from recovery
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
You really have to read the OP again :sly:
Timofey_K said:
hello! I had the same issue recently, so I solved it by next actions: I typed in the Windows command line(cmd.exe) 'pnputils -e', so I could see all drivers I have installed and their 'oem*.inf' files. I had 4 HTC drivers, it was like they were in a conflict. Then I deleted each driver with next command: 'pnputils -f -d <oem file name>.inf'. So after that, I plugged in the cable and the HOX was recognized by the computer!
Report back if that helped you!
Click to expand...
Click to collapse
Unfortunately it didn't work! I've found only 1 HTC driver & I deleted it anyway, but the issue remains unsolved!
I presume the issue is within my phone! maybe it's a hardware problem as @Thant have said.
Thanks anyway.
i was having a similar (not exactly same) problem that on CM 10.2, my phone storage was not being mounted on my pc but it mounted in recovery and fastboot... this is what i did..
Connect your phone to pc, go to device manager from control panel and see if the device shown with a yellow triangle.
right click it, chose to update driver software, select manually from a list, chose android adb interface from list, then either chose google or htc (depending on your rom, for CM, prefer google).. Your phone will be recognised by pc
Khizar Amin said:
i was having a similar (not exactly same) problem that on CM 10.2, my phone storage was not being mounted on my pc but it mounted in recovery and fastboot... this is what i did..
Connect your phone to pc, go to device manager from control panel and see if the device shown with a yellow triangle.
right click it, chose to update driver software, select manually from a list, chose android adb interface from list, then either chose google or htc (depending on your rom, for CM, prefer google).. Your phone will be recognised by pc
Click to expand...
Click to collapse
The phone isn't shown in device manager!
saleh9416 said:
The phone isn't shown in device manager!
Click to expand...
Click to collapse
Then try using a different data cable... also try connecting it to a different pc and also check if otg usb is working or not.. coz if otg does not work then its a problem with your port