Develop Bugs

Note 2 {N7100} not connecting as a media device

Hello,
I have a problem with my Note 2 (N7100).
When I connect my Note 2 (N7100) to my Laptop, its not connected as a media device, it takes charge only. I can't see the internal storage or memory card as a external device, also not connected in download mode in odin.
Please anyone help me solve the issue.
Thanks in Advance.
Regards.

sadique2804 said:
Hello,
I have a problem with my Note 2 (N7100).
When I connect my Note 2 (N7100) to my Laptop, its not connected as a media device, it takes charge only. I can't see the internal storage or memory card as a external device, also not connected in download mode in odin.
Please anyone help me solve the issue.
Thanks in Advance.
Regards.
Click to expand...
Click to collapse
Are you using a custom ROM....
Anyway after connecting your phone you should see a notification on the bar that says USB for charging, click on that and tap on the second option, USB for media transfer

Anymore suggestion
Vishal Vignesh said:
Are you using a custom ROM....
Anyway after connecting your phone you should see a notification on the bar that says USB for charging, click on that and tap on the second option, USB for media transfer
Click to expand...
Click to collapse
Thanks anyway
but nothing shows as a notification in status bar or anywhere else.
And in both roms Stock or custom, problem is same, otherewise I am using custom rom (Eclipse by AC).

sadique2804 said:
Thanks anyway
but nothing shows as a notification in status bar or anywhere else.
And in both roms Stock or custom, problem is same, otherewise I am using custom rom (Eclipse by AC).
Click to expand...
Click to collapse
OK, go to developer options, there will be an option called, select USB configuration....
Connect your phone to your PC and click the option and select media device

Vishal Vignesh said:
OK, go to developer options, there will be an option called, select USB configuration....
Connect your phone to your PC and click the option and select media device
Click to expand...
Click to collapse
Not found USB configuration
USB Debugging is checked

Does your computer detect your phone on USB debugging

Vishal Vignesh said:
Does your computer detect your phone on USB debugging
Click to expand...
Click to collapse
No
Not Detecting a phone nor a beep.
Even Samsung USB driver is installed.

sadique2804 said:
No
Not Detecting a phone nor a beep.
Even Samsung USB driver is installed.
Click to expand...
Click to collapse
Try using another USB cable on another port on your computer....
Type the problem in the forum of your rom...
They can help you better.....

Thanks buddy
Vishal Vignesh said:
Try using another USB cable on another port on your computer....
Type the problem in the forum of your rom...
They can help you better.....
Click to expand...
Click to collapse
3 Different types of cables in 3 different ports including USB 3.0 port
and also tried in another laptop.
same cables and laptops works perfect for other android phones.
btw its not the rom issue
service menu configuration in phone
maybe its qualcomm usb configuration

Help me Help me huhu

I can not connect note 4 to my computer
I do not understand why. MTP does not show up. It is only charged only
I am very sad for it help me thank you so much

lymada said:
I can not connect note 4 to my computer
I do not understand why. MTP does not show up. It is only charged only
I am very sad for it help me thank you so much
Click to expand...
Click to collapse
Do you have the samsung usb drivers installed on your computer?

dhplap said:
Do you have the samsung usb drivers installed on your computer?
Click to expand...
Click to collapse
yes. i have installed http://developer.samsung.com/technical-doc/view.do?v=T000000117

lymada said:
yes. i have installed http://developer.samsung.com/technical-doc/view.do?v=T000000117
Click to expand...
Click to collapse
Do you have usb debugging enabled? If not try that

dhplap said:
Do you have usb debugging enabled? If not try that
Click to expand...
Click to collapse
yes sir i have usb debugging enabled

anyone help me please !!!

JUST DIAL *#0808# to enable MTP. Or just go to Settings > Storage >click three dots in top right > USB connection mode > Select MTP.
If it does work, what's your android version?
*Go to Settings/Developer options/select USB settings/MTP.

Are you using the USB cable that came with your phone? Try a different cable as well.
Sent from my SM-N910V using Tapatalk

Unable to detect device in adb mode

Installed proper driver 1.0.6
Enabled usb debugging
But the option to give authorisation is not popping up
Can anyone please assist?
Sent from my ZUK Z2132 using Tapatalk

Sanking said:
Installed proper driver 1.0.6
Enabled usb debugging
But the option to give authorisation is not popping up
Can anyone please assist?
Click to expand...
Click to collapse
Disable developer option and then enable it will reset the settings of developer option

adb will not work

I have got my device to be recognized by my PC but adb will not work ... Can anyone provide help on how to make it work?

When you plug the phone into the PC, pull down the notification area and change the USB options from Charging to Transfer Files.

dratsablive said:
When you plug the phone into the PC, pull down the notification area and change the USB options from Charging to Transfer Files.
Click to expand...
Click to collapse
I've done that...the phone is recognized by my PC just not when I run adb devices...nothing shows up ...adb reboot doesn't work

canemaxx said:
I've done that...the phone is recognized by my PC just not when I run adb devices...nothing shows up ...adb reboot doesn't work
Click to expand...
Click to collapse
Did your phone prompt you to allow the computers fingerprint ? If not toggle debugging a few times till it does.
You have updated sdk and driver's ?

Lawlrus said:
Did your phone prompt you to allow the computers fingerprint ? If not toggle debugging a few times till it does.
You have updated sdk and driver's ?
Click to expand...
Click to collapse
I don't have fingerprint set up but I have toggled back and forth and do not get the prompt to allow connection to my PC

canemaxx said:
I don't have fingerprint set up but I have toggled back and forth and do not get the prompt to allow connection to my PC
Click to expand...
Click to collapse
I'm not talking about fingerprint protection, when you switch to other modes aside form Charing when you have USB debugging turned on, if will prompt you to accept the computers fingerprint, meaning make alterations to your device.
You need to allow that, and if you're not getting that prompt, update your sdk tool, drivers, u install the drivers, reinstall them, try a different cable/USB port/ computer. Pretty much do all the basic trouble shooting.
My device was very picky about what port I could use

Lawlrus said:
I'm not talking about fingerprint protection, when you switch to other modes aside form Charing when you have USB debugging turned on, if will prompt you to accept the computer fingerprint, meaning make altercations to your device.
You need to allow that, and if you're not getting that prompt, update your sdk tool, drivers, u install the drivers, reinstall them, try a different cable/USB port/ computer. Pretty much do all the basic trouble shooting.
My device was very picky about what port I could use
Click to expand...
Click to collapse
That's what I'm not getting is that prompt ...it will connect for mtp and PTP file transfer but will not recognize adb. Which ask version are you using and do you have a link?

canemaxx said:
That's what I'm not getting is that prompt ...it will connect for mtp and PTP file transfer but will not recognize adb. Which ask version are you using and do you have a link?
Click to expand...
Click to collapse
Can't check because I'm not home, all I know is I used minmal fastboot and adb tools because my windows uses powershell not cmd.
Doesn't Google link the newest on the page for their official images ?
Try running adb devices and see if it will make the prompt show up

Lawlrus said:
Can't check because I'm not home, all I know is I used minmal fastboot and adb tools because my windows uses powershell not cmd.
Doesn't Google link the newest on the page for their official images ?
Click to expand...
Click to collapse
Yeah and that's what I downloaded was their latest version of platform tools. I just don't get this. I'm so close to returning this phone and just keeping my og xl

canemaxx said:
Yeah and that's what I downloaded was their latest version of platform tools. I just don't get this. I'm so close to returning this phone and just keeping my og xl
Click to expand...
Click to collapse
Whatever works for you lol. Can promise you that this is not the ONLY device that can give issues on the first time getting adb to work. I've had it happen on two other devices that were Nexus units.

Lawlrus said:
Whatever works for you lol. Can promise you that this is not the ONLY device that can give issues on the first time getting adb to work. I've had it happen on two other devices that were Nexus units.
Click to expand...
Click to collapse
I don't get what else I could do to make this work tho that's the problem....what am I missing

USB debugging enabled?

Heisenberg420 said:
USB debugging enabled?
Click to expand...
Click to collapse
Ues

canemaxx said:
Ues
Click to expand...
Click to collapse
Try running adb kill-server and then adb devices

Heisenberg420 said:
Try running adb kill-server and then adb devices
Click to expand...
Click to collapse
Bro thank you!!!! That worked

canemaxx said:
Bro thank you!!!! That worked
Click to expand...
Click to collapse
Yep

canemaxx said:
I don't get what else I could do to make this work tho that's the problem....what am I missing
Click to expand...
Click to collapse
Adb kill-server worked

I hope someone still sees this post. I have a friends Google Pixel XL that I was able to revive from a bootloop by sideloading the latest OTA. Upon starting up, my friend forgot his screenlock passcode. I've been trying everything to get the device recognized in bootloader mode on my pc. It keeps showing up blank. I am trying to use ADB to bypass the unlock code. If anyone has an idea how I can get into this phone BEFORE I reset it, that would be very appreciated! It is not rooted and no unlocked bootloader.

Yooperjusty said:
I hope someone still sees this post. I have a friends Google Pixel XL that I was able to revive from a bootloop by sideloading the latest OTA. Upon starting up, my friend forgot his screenlock passcode. I've been trying everything to get the device recognized in bootloader mode on my pc. It keeps showing up blank. I am trying to use ADB to bypass the unlock code. If anyone has an idea how I can get into this phone BEFORE I reset it, that would be very appreciated! It is not rooted and no unlocked bootloader.
Click to expand...
Click to collapse
You have to enable USB Debugging in settings in order to delete the unlock code. Unfortunately, you can't because he forgot it. You can try booting TWRP on the device using fastboot and see if you can delete the unlock code's key file using TWRP's file manager, but the reality here is that you likely will have to reset. Hope your friend didn't use a throwaway email address when setting up the device.

usb tethering

After connected to computer usb tethering option not enabling ,plzz help

vickyfule said:
After connected to computer usb tethering option not enabling ,plzz help
Click to expand...
Click to collapse
Turn on USB debugging and check..
Sent from my Z2 Plus using Tapatalk

vickyfule said:
After connected to computer usb tethering option not enabling ,plzz help
Click to expand...
Click to collapse
Or you can enable it by clicking option available in developer option as 'select usb configuration'.