I want to authorize usb debugging in my pc/laptop but am not able to. So can any one provide me with the procedure and help me.
redmeidoubt said:
I want to authorize usb debugging in my pc/laptop but am not able to. So can any one provide me with the procedure and help me.
Click to expand...
Click to collapse
Install adb drivers enable debugging option in phone (by tapping the build number in about phone in settings a new option developer settings will apear in settings in that enable debugging option
When I Try to connect My Zenfone to PC & also trying to connect on debugging mode then it show display that debugging section is totally disabled & showing message "Device is in Charging mode, USB debugging is disabled.
&
2nd Problem is Media Device Not showing in Mobile & PC Also.
PLZ HELP & GIVE ME PERFECT SOLUTION
I have same problem. After switching over in my car to charging only - my Zenfone is also saying "Device is in Charging mode, USB debugging is disabled" I can't find any switch to take it back. Also the same with Media Device not showing in Mobile & PC.
How to make this working again???
The PC connection mode on your phone is set to "Charge only". Idk about the stock ROM, but on CyanogenMod you just press the notification that shows up when you connect the phone to change the mode
wasiq224 said:
The PC connection mode on your phone is set to "Charge only". Idk about the stock ROM, but on CyanogenMod you just press the notification that shows up when you connect the phone to change the mode
Click to expand...
Click to collapse
Dear wasiq224,
Thanks for your answer, but is not working. I'm on CyanogenMod - but there is no notification shown up. Phone is quite and also PC - no message.
Even if I press under "STORAGE" -> "USB computer connection" the phone is saying: "USB is now disconnected". I checked already various menues for some settings without result. Google was also not help in this matter.
Hein_Mueck said:
Dear wasiq224,
Thanks for your answer, but is not working. I'm on CyanogenMod - but there is no notification shown up. Phone is quite and also PC - no message.
Even if I press under "STORAGE" -> "USB computer connection" the phone is saying: "USB is now disconnected". I checked already various menues for some settings without result. Google was also not help in this matter.
Click to expand...
Click to collapse
Try going to Developer Options>Disable USB Debugging, then reboot. Then connect your phone and try going to USB computer connection again, and enable whatever connection mode you want. You can re-enable USB debugging after that.
Dear wasip224
Checked once more the debugging setting's. But if the phone is connected to the computer or not connected, disableing USB Debugging is not possible. This item is greyed out all the time. See attached pictures.
Best regards
Hein Mueck
Same Problem with my device .........
Hein_Mueck said:
Dear wasip224
Checked once more the debugging setting's. But if the phone is connected to the computer or not connected, disableing USB Debugging is not possible. This item is greyed out all the time. See attached pictures.
Best regards
Hein Mueck
Click to expand...
Click to collapse
Same Problem with my device .........
Same with me
ishantanish said:
Same Problem with my device .........
Click to expand...
Click to collapse
With me is the same, i noticed that the Asus driver certificate is expired. If i disable windows driver signature verification it works.
drahhen said:
With me is the same, i noticed that the Asus driver certificate is expired. If i disable windows driver signature verification it works.
Click to expand...
Click to collapse
How you did do this?? Did you uninstall the driver first? Where I can find this?
Hein_Mueck said:
How you did do this?? Did you uninstall the driver first? Where I can find this?
Click to expand...
Click to collapse
I'm at work now, but you use Explorer and go to the folder where you extracted the drivers and use right-click --> properties in one of the files there. There is a tab that lists certificates. Just to be sure you can temporally disable driver signing verification.
http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
This instructions works in windows 8.1 and 10.
See picture
drahhen said:
I'm at work now, but you use Explorer and go to the folder where you extracted the drivers and use right-click --> properties in one of the files there. There is a tab that lists certificates. Just to be sure you can temporally disable driver signing verification.
http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
This instructions works in windows 8.1 and 10.
Click to expand...
Click to collapse
It's in portuguese but on the right part of the image you can see "Valido a partir de XXXX até XXXX" wich means "Valid from XXXX to XXXX". It expired last month.
Hi all,
Could you install latest Intel USB Driver from this link?
https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
Reupdate the driver manually and let me know.
Sent from my ASUS_Z00AD
krasCGQ said:
Hi all,
Could you install latest Intel USB Driver from this link?
https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
Reupdate the driver manually and let me know.
Sent from my ASUS_Z00AD
Click to expand...
Click to collapse
Doesn't work for me, it says it cannot find the files. In my win10 install i have two problems, ADB only works if i disable driver signing verification and MTP doesn't work. I tried running sfc /scannow and it says WinUSB is corrupt and cannot be repaired (probably why MTP does not work). I tried using intel drivers for both and it does not work. Only ASUS works (but fails because of certificate) for ADB Composite Device, but mtp doesn't work anyway.
This tutorial could help you anyway.
http://forum.xda-developers.com/showthread.php?p=64093132
Sent from my ASUS_Z00AD
Dude i tried EVERYTHING, i flashed different roms and the issue persists
k1t4r0 said:
Dude i tried EVERYTHING, i flashed different roms and the issue persists
Click to expand...
Click to collapse
On another PC, or via tutorial on a post before you...
Sent from my GT-I9500
krasCGQ said:
On another PC, or via tutorial on a post before you...
Sent from my GT-I9500
Click to expand...
Click to collapse
Hi Kras and thank for the response!
I Tried it too but in my device manager it wont show any device related to asus nor adb.
Tryied to boot into TWRP but no MTP either.
I Tried USDBview but doesnt show. The strange fact is that the phone charges normally.
It happened after i switched to CHARGE ONLY... after that, could never go back "/
I think i´ll try to revert EVERYTHING to stock. Somethings not right.
Another information, the cellphone charges, i´ve tryied to unistall and reinstall every adb usb_driver but in driver manager, nothing appears, even an exclamation. Tried to force install drivers, nothing either. All this happened after set CHARGE MODE i´m so pissed off and frustrated
This is a shot in the dark, but in device manager you can click View>Show hidden devices.
From there you can truly uninstall all drivers, and then reboot and try reinstalling. Maybe this will help.
Also, different ports, different cables?
If it's just for file transfers have you also tried something like AirDroid or Dropbox/Google Drive/Mega?
Guys it'smy first time i m about to unlock bootloader of zuk z2 got boot ing on mail.but when i type adb device it doesn't show my device ... Plzz giv any driver link or solution
Have you enabled developer options and do you have Android debugging enabled there?
Sent from my Z2 Plus using Tapatalk
manojchs said:
Have you enabled developer options and do you have Android debugging enabled there?
Sent from my Z2 Plus using Tapatalk
Click to expand...
Click to collapse
yess boss absolutly. i hav enable it adb is not detetcting my zuk 2...plzz help my first step is not successfull
Are you seeing any adb prompt in your phone when you connect it to the pc? If not then the phone mat not be properly connected. If possible try using a different USB cable.
Sent from my Z2 Plus using Tapatalk
manojchs said:
Are you seeing any adb prompt in your phone when you connect it to the pc? If not then the phone mat not be properly connected. If possible try using a different USB cable.
Sent from my Z2 Plus using Tapatalk
Click to expand...
Click to collapse
Noi there is no promt on ..phone
Disconnect the phone from PC then go to developer options and choose revoke USB debugging permissions. Then connect the phone again and run the adb devices command. You should see a prompt in you phone to allow USB debugging. Select trust this computer and cos ok. ADB should work after that.
Sent from my Z2 Plus using Tapatalk
manojchs said:
Disconnect the phone from PC then go to developer options and choose revoke USB debugging permissions. Then connect the phone again and run the adb devices command. You should see a prompt in you phone to allow USB debugging. Select trust this computer and cos ok. ADB should work after that.
Sent from my Z2 Plus using Tapatalk
Click to expand...
Click to collapse
sir i got promt on phone then i adb rebooted to bootloader but after puting this command fastboot -i 0x2b4c flash unlock unlock_bootloader.img it is saying waiting for device
manojchs said:
Disconnect the phone from PC then go to developer options and choose revoke USB debugging permissions. Then connect the phone again and run the adb devices command. You should see a prompt in you phone to allow USB debugging. Select trust this computer and cos ok. ADB should work after that.
Sent from my Z2 Plus using Tapatalk
Click to expand...
Click to collapse
Sir now device is showing on adb i command adb devices or showed my device then cammnded reboot to bootloader then i comm to unlock bootloader given on thread but it say waiting for device
Is the phone still in fastboot mode?
Sent from my Z2 Plus using Tapatalk
Hello, it has someone Kernel with automatically enabled ADB and debugging usb in default.Prop? Display does not work and I can not enable these options and need to recover files.
OTG
DonCorleone94 said:
Hello, it has someone Kernel with automatically enabled ADB and debugging usb in default.Prop? Display does not work and I can not enable these options and need to recover files.
Click to expand...
Click to collapse
use mouse with otg adapter
MaDaLiNoSt said:
use mouse with otg adapter
Click to expand...
Click to collapse
nothing is visible on the screen it is black
DonCorleone94 said:
nothing is visible on the screen it is black
Click to expand...
Click to collapse
then how do you think you will be able to flash a custom kernel?
if you have pin unlock use this for reference to try to unlock the phone:
I wanted to do this on the eye: d thank you for the screen photos
DonCorleone94 said:
Hello, it has someone Kernel with automatically enabled ADB and debugging usb in default.Prop? Display does not work and I can not enable these options and need to recover files.
Click to expand...
Click to collapse
Next time, set up adb and screensharing with your computer.
Sent from my SM-A520W using XDA Labs
After connected to computer usb tethering option not enabling ,plzz help
vickyfule said:
After connected to computer usb tethering option not enabling ,plzz help
Click to expand...
Click to collapse
Turn on USB debugging and check..
Sent from my Z2 Plus using Tapatalk
vickyfule said:
After connected to computer usb tethering option not enabling ,plzz help
Click to expand...
Click to collapse
Or you can enable it by clicking option available in developer option as 'select usb configuration'.