Develop Bugs

Jasjar First Day, Upgraded And Now Dead ! Need Help Plz

Hi guys,
I tried to upgrade my jasjar with "JASJAR_WWE_19096_19505_11300_AKU_3_2_ship.exe" i download it from this forum, first i tried it and it said " error 101 communication problem" or something like that then i tried it again and it took a bit more time to give the same error but when i looked at my pda on the screen says : Serial V1.0 the PC doesnt recognize it.
Ive searched throw the forum few hours and ive tried reset+power+camera or light and it doesnt work, its my first day with it, i was so happy and now dead
Please i need your help
P.D : Its the V1640 of Vodafone.

Intunes said:
Hi guys,
when i looked at my pda on the screen says : Serial V1.0 the PC doesnt recognize it.
Please i need your help
P.D : Its the V1640 of Vodafone.
Click to expand...
Click to collapse
First, here is the instruction guide: http://forum.xda-developers.com/showthread.php?t=269118
Second: You are on the BootLoader Mode. That is fine, don't worry. Relax and breathe easy.
Third: If you are going to try NEW ROMs try Helmi's: http://forum.xda-developers.com/showthread.php?t=284887
Good luck, mate.

Cktlcmd, thanks for your fast answer i was getting desesperated, ive downloaded few ROMS also the one you're telling me and i can only see nk.nbf not the radio or the extended rom only the windows mobile one, and the one i tried to upgrade was a .exe ..any other link i can download the rom ? doesnt matter if its the last one, now ill be happy if i could switch it on

Intunes said:
Cktlcmd, thanks for your fast answer i was getting desesperated, ive downloaded few ROMS also the one you're telling me and i can only see nk.nbf not the radio or the extended rom only the windows mobile one, and the one i tried to upgrade was a .exe ..any other link i can download the rom ? doesnt matter if its the last one, now ill be happy if i could switch it on
Click to expand...
Click to collapse
That is fine, that's all you need, because technically, you already have the radio and Ext ROM installed on your device. Read the instructions FULLY on the 1st link. Since you don't have the ms.nbf and radio.nbf file, you are just upgarding the CE ROM. Therefore on the new folder that you are going to compile, you only need 9 files enumerated on the list (some are included on Helmi's File download).

cktlcmd, im inserting maupgradeut_noid_602.exe in Helmi directory and execute, it goes everything ok but when i click on upgrade it appers "ERROR 150 : ROM UPGRADE UTILITY ERROR "

Intunes said:
cktlcmd, im inserting maupgradeut_noid_602.exe in Helmi directory and execute, it goes everything ok but when i click on upgrade it appers "ERROR 150 : ROM UPGRADE UTILITY ERROR "
Click to expand...
Click to collapse
Did you put your device on boot loader mode by pressing the RESET PIN, BACKLIGHT BUTTON, and POWER BUTTON all at once? If NO, do that first then double click or run the Ma_Upgrade file included.

Replace the Ma Upgrade file, I updated the file from the 1st link.
Good luck my friend.

Hi cktlcmd, ive tried to do the RESET PIN, BACKLIGHT BUTTON, and POWER BUTTON ive done it thousand times and the only thing that happens its that the Serial V1.0 goes off one second and comes back

Intunes said:
Hi cktlcmd, ive tried to do the RESET PIN, BACKLIGHT BUTTON, and POWER BUTTON ive done it thousand times and the only thing that happens its that the Serial V1.0 goes off one second and comes back
Click to expand...
Click to collapse
Have you tried replacing the Ma_Upgrade_No ID File? Download it again from the 1st link. Sometimes they become corrupted for no reason.
Intunes said:
cktlcmd, im inserting maupgradeut_noid_602.exe
Click to expand...
Click to collapse
I don't know why your Ma_Upgrade file has numbers behind it??????

Intunes said:
Hi cktlcmd, ive tried to do the RESET PIN, BACKLIGHT BUTTON, and POWER BUTTON ive done it thousand times and the only thing that happens its that the Serial V1.0 goes off one second and comes back
Click to expand...
Click to collapse
You are on the right track here. It must be the Ma_Upgrade file. You just need to reflash your device.

Ive downloaded the new maupgradeut_noid_602.exe but keeps on with the same 150 error ive tried it like 20 times already and it doesnt go

First objective is to get instead of SERIAL the "USB" message.
Please disable any firewall you have first ! Second reboot pc and change the USB port.

Hi Decebal,
Thanks for your help, the firewall is already off, should i uninstall active sync ?

try installing the 4.5 beta.

Installed Active Sync 4.5 beta and it keeps without detecting the pda

Intunes said:
Ive downloaded the new maupgradeut_noid_602.exe but keeps on with the same 150 error ive tried it like 20 times already and it doesnt go
Click to expand...
Click to collapse
Why do you have the number "602" behind the name???? Mine does not have it.
Does your PC make a sound at all when you plug your Universal?

cktlmd first thank for all your time and answers, when i plug the universal it just appears that it doesnt recognize the usb device that's it and the file ive got for the upgrader is MaUpgradeUt_noID.exe i download it again from the link you told me and it doesnt goes, i uninstall the active sync and it seems like nothing is connected when i double click the upgrader, it finishes with congrats but nothing has been done to the universal.

Intunes said:
cktlmd first thank for all your time and answers, when i plug the universal it just appears that it doesnt recognize the usb device that's it and the file ive got for the upgrader is MaUpgradeUt_noID.exe i download it again from the link you told me and it doesnt goes, i uninstall the active sync and it seems like nothing is connected when i double click the upgrader, it finishes with congrats but nothing has been done to the universal.
Click to expand...
Click to collapse
When you say you double click the upgrader, which do you mean, the "maupgrade no id" file or the "ROM UPgrade" File? You should be running the MaUpgrade File.
If this still does not work, try downloading the original ROM from the device manufacturer.

if you have another PC around without activesync retry the procedure !

decebal said:
if you have another PC around without activesync retry the procedure !
Click to expand...
Click to collapse
Or use a friends computer just so your Universal can be recognize.
Another thing, are you using a USB hub? If yes, then switch to a different USB plug. Your Universal needs to be connected directly to your computer and not a hub.

please help me stuck after rom upgrade

Hello,
my universal screen is stuck
after Ivan's (3.5)rom upgrade
i pressed the 2 softkeys and reset button
i got the press 0 to clear memory
I press 0 and then the universal does not start up
plz plz plz help me
I was trying to understand what is mtty tool but never understood
some kind person plz help...
thankyou (anxiously waiting for reply)

corleno said:
Hello,
my universal screen is stuck
after Ivan's (3.5)rom upgrade
i pressed the 2 softkeys and reset button
i got the press 0 to clear memory
I press 0 and then the universal does not start up
plz plz plz help me
I was trying to understand what is mtty tool but never understood
some kind person plz help...
thankyou (anxiously waiting for reply)
Click to expand...
Click to collapse
Iv managed to get into bootloader
I run mtty
my only problem is I have COM1 and COM2 in dropdown
no USB
can some 1 tell me why ??
please

corleno said:
Iv managed to get into bootloader
I run mtty
my only problem is I have COM1 and COM2 in dropdown
no USB
can some 1 tell me why ??
please
Click to expand...
Click to collapse
When it Bootloader mode, there are some words on screen, check if it is minimum v1.00 and above.
When in Bootloader mode, activesync is off, but you can run the upgrade software.

CWKJ said:
When it Bootloader mode, there are some words on screen, check if it is minimum v1.00 and above.
When in Bootloader mode, activesync is off, but you can run the upgrade software.
Click to expand...
Click to collapse
thank you for ur reply
it says v 1.00
activ sync is off
but I donno how 2 set up mtty
because I have only com1 and com2
no USB
i guess i need to get USB>
on screen whn i press enter
but i dont get anything
I tried rom upgrade,
the system says device not recognizable

Hope you did not change or delete any previous settings on both PPC & PC.
Just connect your device to your usual working activesync usb port.
Do not use ROMUpgradeUt.exe, use MaUpgradeUt_noID.exe to upgrade from Bootloader mode.

CWKJ said:
Hope you did not change or delete any previous settings on both PPC & PC.
Just connect your device to your usual working activesync usb port.
Do not use ROMUpgradeUt.exe, use MaUpgradeUt_noID.exe to upgrade from Bootloader mode.
Click to expand...
Click to collapse
yes I finally managed to enable USB
and I use
USB>set 14 0
then I get this
HTCST ÚÈÒHTCEUSB>
I try normal upgrade with ROMUpgradeUt got error 101
now I try with MaUpgradeUt_noID.exe after replacing the 3 files from the country_error folder
I get error saying the upgrade is not designed to run on my device

CWKJ said:
Hope you did not change or delete any previous settings on both PPC & PC.
Just connect your device to your usual working activesync usb port.
Do not use ROMUpgradeUt.exe, use MaUpgradeUt_noID.exe to upgrade from Bootloader mode.
Click to expand...
Click to collapse
Thank you CWKJ
Iv got the system to work again
thanks
I re-flashed with my old O2 rom and no mitty required
just boot loader

You are welcome. Hope it is of any help.

I have the same problem!
But after have this problem, I log in to bootloader and up rom beta 15 again (old rom), after up rom beta 15 finished and everything is ok! I start re up rom (3.5) for again and everything is good! now, i'm running 3.5, it's very very good, faster, bigger memory...! Thanks to Mr.Ivan so much!

quanss78 said:
But after have this problem, I log in to bootloader and up rom beta 15 again (old rom), after up rom beta 15 finished and everything is ok! I start re up rom (3.5) for again and everything is good! now, i'm running 3.5, it's very very good, faster, bigger memory...! Thanks to Mr.Ivan so much!
Click to expand...
Click to collapse
Uv got some bal*s dude
Iv shi* my pants the very 1st time
Im too scared 2 go back..or is it front

Stuck in Bootloader V1.00 TRIED EVERYTHING!

I m having big troubles with my Universal. I m stuck in the Bootloader screen. When I try I hard reset (pressing 2 softkeys and reset and than 0 he says 'clearing now' for only one second and than switches back to the bootloader screen! I ve tried to upgrade it with MAUpgrade_NOID.exe. He than upgrades I think my OS only but after this a hard reset doesn t help! I keep getting stuck in the bootloader screen! I ve also tried a hard reset without the SIM and SD card but this don t help either......
Now what.......

have you tried set 14 0

I saw something like that. Can you explain how to a bit more specific?

sanderh said:
I saw something like that. Can you explain how to a bit more specific?
Click to expand...
Click to collapse
Hi,
Read this thread and follow the step by step instructions to reset your DOC Table.
http://forum.xda-developers.com/showpost.php?p=1097645&postcount=4
After completing the above please re-flash the Rom you wish to use.
When flashing Roms to your Uni, it is always best practice, to remove the SD Card and enter BootLoader mode before flashing.
Cheers,
Beasty

Try the little tool attached. It's from the wiki.
Here's how to use:
1. disconnect USB cable from your device
2. disable USB connection in ActiveSync
3. reconnect USB cable
4. wait some 30 seconds
5. run the tool
6. If successful, device will boot itself.
Has worked for me every time.
Psi

Had this issue today. Couldn't flash any rom and was stuck on the bootloader screen. Try flashing a shipped rom for your phone. That helped me. After flashing original I was able to flash WM6 rom using ROMUpgradeUt.exe.

Try a diferent cable.
If you get when connecting for a second usb, than changed i to the serial, try a diferent cable - its normal miniusb.
Then go to wiki and download UNI_ExitBootloader.exe.
Maybe will work.
If yes give a masage.
KR.
Lukasz

beast0898 said:
Hi,
Read this thread and follow the step by step instructions to reset your DOC Table.
http://forum.xda-developers.com/showpost.php?p=1097645&postcount=4
After completing the above please re-flash the Rom you wish to use.
When flashing Roms to your Uni, it is always best practice, to remove the SD Card and enter BootLoader mode before flashing.
Cheers,
Beasty
Click to expand...
Click to collapse
Thanks man, that really helped. My qtek9000 got stick at the bootloader's screen and i couldnt perform an upgrade. I followed ur instructions and now it is upgrading. waiting for the results.
thanks again

yeap, everything went fine.

Completely stuck without any UBS communication
Hi everybody,
Since i tried (yesterday) to flash a new UNIVERSAL 2.12 WWE ROM, i 'm stuck in Bootloader. I had this bloody Country ID error and after that, the USB connection between my Universal and my PC went wrong and ... i tried all the solutions given here and there :
1/ an exitboolader.exe tool
2/ the mtty option
3/ tried to kill all the process linked to AS in a way or another
4/ made several Hard Reset - connection - changing cable and so on ...
The main problem is that Windows XP is not able to recognize my Universal anymore SO ... i can't even try the solutions above based on an exiting commication thru USB between my PC and my PPC ...
I only have : "Serial" and "V1.0" on my pocket PC
Any idea to establish an USD relation between the universal and my PC ?
Pls help ... i missed this bloody device ;-/

I canoot start, i cannot repair ROM

Hi, all, i have problem with my SPV 700 (HTC 3600) - Trinity.. When I turn on it, I see only start screen eith HTC logo, (you'll see it in attachments) there is only M 05 B05, R 1.50.08.11, g 32.83.7020.20h, D 3.00, i can do nothing... I cant reflash ROM because my computer cannot find it, and instalation write updater is old, you must find newer updater.. When i install acivesync, it cannot find too, but my installers (5 downloaded) will start, but write Cannot find hardware. (or mobile phone). Is any program, to connect my htc, or reflash ROM?
I found Schaps_WM6Pro_Trinity_4.30.2008_WWE_Full(p3600I) or some next, but every write cannot connect. Thank you very much.

Load from mini SD!?
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!

I cant go to tricolor display, i cant reset, i cant do anything, i thing it freeze.. sorry my english, im from slovakia. Or.. how I can go to tricolor mode? I try all combination clicks.

Power+Camera+reset button with ur touch pen

sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?

OverrideCrash said:
sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?
Click to expand...
Click to collapse
Man please read from instruction from the passage named HARD RESET, the button you are talking about its for software reset only!
Use the seq. Power+Camera+reset!Keep each button pushed and then use stillus for reset and you will get the Tricolor screen - but first format your SD like i describe in the post #2 and then copy your ROM on it!

exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
check this thread
http://forum.xda-developers.com/showthread.php?p=1923734

manos4596 said:
exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
Click to expand...
Click to collapse
Hard reset your phone first, then use the bootloader method(Camera+Power+Reset then in the bootloader connect the usb cable)!
First try this http://forum.xda-developers.com/showthread.php?t=299659
If not - read carefully the instructions from here:
- http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66 - all you have to know about hard SPL and how to do.
Anyway, also try to change the Rom image that you have used when you bricked your device!Try a new ROM by the date of release!

Thnx for the advice! I got it working. Before reading your reply I had started installing the original rom provided by htc (WM5). It installed correctly and at least i have my phone back. I will check your links about hard SPL (thanx ) but i had installed the gelly_01 rom before , not through vista though.
I will try to reinstall it.
It's getting late here so i will check it tommorow and infirm you.
Regards.

problem solved Its working now, but I dont know how i repair it
for unlock CID HTC_Hermes_SIM_CID_Unlock_v3a.zip (Its not compatibile, but my opinion is it unlock but dont repair rom) then i give there [P3600i] HardSPL v1.1.rar and end is Trinity_WM_6.1_NEW.OS_19965_Diamond_edition_by_Akeo_V3.1.rar all files are in attachments.
I give there HTC_Trinity_SIM_CID_Unlock_v1.zip too, before Akeo Diamond edition.
This can be closed now. Thanks for all thank you ! Here are lot of good peoples really thx

slimul said:
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!
Click to expand...
Click to collapse
Thanks a lot . i had the same problem but now my htc is back to life

i
i still have the problem with the rom , i just do every thing and don't work can any one cold help me
sorry the bad english

WLAN ERROR NOW FIXED!!! Thanks to gruptnt

Thanks to gruptnt over at this thread: http://forum.xda-developers.com/showthread.php?t=490681
WLAN IS NOW FIXED!!!!!! Flash without worry anymore.

my wifi work great again
That is perfect solution !!!
thank !!!

complimenti....
penso proprio che questo tread sia
sticky
eng: sticky for ever

binht611 said:
my wifi work great again
That is perfect solution !!!
thank !!!
Click to expand...
Click to collapse
I also have the same problem... i visit the above post but the post is very big... can you please tell me what steps you follow....
Thank you.... i also have trinity and after this error my trinity hangs frequently.....

These two posts should help:
http://forum.xda-developers.com/showpost.php?p=5313622&postcount=340
http://forum.xda-developers.com/showpost.php?p=5314726&postcount=345

WLAN IS NOW FIXED!!!!!! Flash without worry anymore.[/QUOTE]
Dear Supersport....
thanks for update...
but after the complete procedure (all report was ok), the phone dont restart.
i can see the rom number...etc etc, but remain the htc logo on the black screen.
How can resolve this ?
Thanks a lot for your help.
Vito95

vito95 said:
Dear Supersport....
thanks for update...
but after the complete procedure (all report was ok), the phone dont restart.
i can see the rom number...etc etc, but remain the htc logo on the black screen.
How can resolve this ?
Thanks a lot for your help.
Vito95
Click to expand...
Click to collapse
Have you tried to flash another ROM to the phone and see if that gets it going again?

First of all thanks to you SuperSport and GRUPTNT for this
But for me, unfortunately, it doesn't works, i'm unable, when running Mtty116, to get the USB connection. I got Vista and i think it's the problem.
If somebody got an idea about it...

kabtv said:
First of all thanks to you SuperSport and GRUPTNT for this
But for me, unfortunately, it doesn't works, i'm unable, when running Mtty116, to get the USB connection. I got Vista and i think it's the problem.
If somebody got an idea about it...
Click to expand...
Click to collapse
yes, confirmed, you must XP

SuperSport said:
Have you tried to flash another ROM to the phone and see if that gets it going again?
Click to expand...
Click to collapse
Hi, after some hours the phone is restarted.
Now the only problem is that in comm manger application, Wlan dont work.
remain in off state (red botton).
can you help me?
regards

narshorn said:
yes, confirmed, you must XP
Click to expand...
Click to collapse
Please see this update.
Now, you can run MTTY in Windows Vista and Windows 7. I've made a Video Tutorial Showing how. It's Step 2b on this page:
http://forum.xda-developers.com/showpost.php?p=5314726&postcount=345

my god, you worked late yesterday on this...
thanks for this and everything else, but again, i think that nothing is going to be easy for me...first, if i disconnect USB from mobile center, it's not in the computer management anymore...so i can't change the driver...next if i reconnect the USB connection, i can find it in the device manager but i can't change the driver because:
On my Vista home premium(32 bits operating system) : ''The folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for 32-bit systems.
and on my Win7(X64 Home Premium): it's the same message except for X64
BTW, it's not the first time that i tried to flash EOM from your signature and i can't go all the way to the process...don't know why, it did stop before the end...but i got the splash screen

kabtv said:
my god, you worked late yesterday on this...
thanks for this and everything else, but again, i think that nothing is going to be easy for me...first, if i disconnect USB from mobile center, it's not in the computer management anymore...so i can't change the driver...next if i reconnect the USB connection, i can find it in the device manager but i can't change the driver because:
On my Vista home premium(32 bits operating system) : ''The folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for 32-bit systems.
and on my Win7(X64 Home Premium): it's the same message except for X64
BTW, it's not the first time that i tried to flash EOM from your signature and i can't go all the way to the process...don't know why, it did stop before the end...but i got the splash screen
Click to expand...
Click to collapse
Ok, I think I forgot to mention one step. Before you disconnect WMDC, be sure your phone is in Bootloader Tri-Color Screen Mode. (Also, before flashing any ROM, be sure to be in Bootloader Tri-Color Screen Mode. [Power/Camera/Reset]) Your Computer will Still be able to see the Phone in Device Manager after WMDC is Disabled.
I don't believe this will work on 64bit Windows. I tried and stopped after a couple failures.
I'm sorry your WLAN is not working still. That's not good and we will do our best to get you back to WiFi.
Looking at the Video again this morning, it does appear to go sort of fast. Hit Pause when needed to read the text pop-ups.
Next thing is I believe you may be selecting the wrong option when you browse for the driver. Be sure you are selecting the option: "Let me pick from a list of device drivers on my computer". If you get a warning that the driver is not the correct driver, BUT you have the option to go ahead with the installation, go ahead and install it. It's a Windows XP Driver, so Win7 will not suggest installing it. But when it's all over, you will be removing it again and reinstalling the Win7 Driver.

SuperSport said:
Ok, I think I forgot to mention one step. Before you disconnect WMDC, be sure your phone is in Bootloader Tri-Color Screen Mode. (Also, before flashing any ROM, be sure to be in Bootloader Tri-Color Screen Mode. [Power/Camera/Reset]) Your Computer will Still be able to see the Phone in Device Manager after WMDC is Disabled.
Click to expand...
Click to collapse
That was it...i succeed to install the driver and WIFi works again
SuperSport said:
I'm sorry your WLAN is not working still. That's not good and we will do our best to get you back to WiFi.
Click to expand...
Click to collapse
don't be, you do so much for the community here
Thanks again...

kabtv said:
That was it...i succeed to install the driver and WIFi works again
don't be, you do so much for the community here
Thanks again...
Click to expand...
Click to collapse
That was FAST , good work! Happy to hear it worked for you.
Also, be sure to delete the XP driver from Device Manager, and re-scan the system to install the original driver. And then, re-activate your USB Connection in WMDC.

kabtv said:
my god, you worked late yesterday on this...
BTW, it's not the first time that i tried to flash EOM from your signature and i can't go all the way to the process...don't know why, it did stop before the end...but i got the 3G Asia splash screen
Click to expand...
Click to collapse
did you experience that...?

kabtv said:
did you experience that...?
Click to expand...
Click to collapse
Did you use SSPL_TRIN.exe to enter Bootloader Mode before flashing? I think that is necessary for a full flash of OEM.

SuperSport said:
Did you use SSPL_TRIN.exe to enter Bootloader Mode before flashing? I think that is necessary for a full flash of OEM.
Click to expand...
Click to collapse
i used the sd card method...

kabtv said:
i used the sd card method...
Click to expand...
Click to collapse
You would still need to use SSPL_TRIN.exe to put the phone into a special Bootloader Mode because the OEM ROMs overwrite the HardSPL on your phone. This special mode allows that to happen.
Copy SSPL_TRIN.exe & your TRINIMG.nbh to your phone's SD Card Root. From your phone's File Explorer program, browse to your SD Card and tap SSPL_TRIN.exe to run it. If asked, go ahead and say "Yes". This will enter a special Bootloader from which you can flash the OEM's.
Only use this method to flash Back to OEM ROMs and NOT for Normal Flashing. You want to use the HardSPL's Bootloader to flash Cooked ROMs to protect your phone.
Download SSPL_TRIN.exe
And, remember, after flashing an OEM ROM, be sure to flash a HardSPL back on your phone BEFORE Flashing Custom ROMs again.
Sorry everyone for getting off topic. kabtv, if you need more help with this, PM me, I'd be happy to help.

SuperSport said:
You would still need to use SSPL_TRIN.exe to put the phone into a special Bootloader Mode because the OEM ROMs overwrite the HardSPL on your phone. This special mode allows that to happen.
Copy SSPL_TRIN.exe & your TRINIMG.nbh to your phone's SD Card Root. From your phone's File Explorer program, browse to your SD Card and tap SSPL_TRIN.exe to run it. If asked, go ahead and say "Yes". This will enter a special Bootloader from which you can flash the OEM's.
Only use this method to flash Back to OEM ROMs and NOT for Normal Flashing. You want to use the HardSPL's Bootloader to flash Cooked ROMs to protect your phone.
Download SSPL_TRIN.exe
And, remember, after flashing an OEM ROM, be sure to flash a HardSPL back on your phone BEFORE Flashing Custom ROMs again.
Sorry everyone for getting off topic. kabtv, if you need more help with this, PM me, I'd be happy to help.
Click to expand...
Click to collapse
Hi,
I have moved to hd, so I didn't come to this forum since then...
I will try to explain a little better the HSPL and official roms.
First, there are several HSPL for trinity. The best one is olipro 1.30, so this th eone we want to get into the trinity.
First the theory, in a .nbh file we have several parts: ipl,radio,spl,splash,os,extrom In an official rom contains all parts, a custom ROM normaly nowdays contains os only. Whith older kitchens contains splash+os
The HSPL of olipro is protected so it is not overwrited by the roms. So it is safer, and you can't get a brick if you don't flash the ipl part.
The SPL is the tricolor program, so when flashing you should view the spl that you have in the trinity.
Whith the customruu of the trinity there is a file called enterbootloader.exe which is transmited to the pda and executed to display the spl. This file is SSPL_TRIN.exe renamed.
Ok, so this are the scenarios:
1) you launch the romupdate whith as/wmdc connected:
Enterbootloader is transmited and executed -> Special SPL 1.07
So when flashing you will flash every part of the nbh (all for oficial, os for custom)
2) you enter manually in boot loader
The SPL in your device -> olipro 1.30
So when flashing you will flash only (ipl,splash,os,ext)
The safer method is to put manually the bootloader mode and flash. You can have the HSPL whith an offical ROM whithout worries. Though there is an exception: you want to update the radio.
If you want to update the radio use method one so you run the other SPL.