Thanks to gruptnt over at this thread: http://forum.xda-developers.com/showthread.php?t=490681
WLAN IS NOW FIXED!!!!!! Flash without worry anymore.
my wifi work great again
That is perfect solution !!!
thank !!!
complimenti....
penso proprio che questo tread sia
sticky
eng: sticky for ever
binht611 said:
my wifi work great again
That is perfect solution !!!
thank !!!
Click to expand...
Click to collapse
I also have the same problem... i visit the above post but the post is very big... can you please tell me what steps you follow....
Thank you.... i also have trinity and after this error my trinity hangs frequently.....
These two posts should help:
http://forum.xda-developers.com/showpost.php?p=5313622&postcount=340
http://forum.xda-developers.com/showpost.php?p=5314726&postcount=345
WLAN IS NOW FIXED!!!!!! Flash without worry anymore.[/QUOTE]
Dear Supersport....
thanks for update...
but after the complete procedure (all report was ok), the phone dont restart.
i can see the rom number...etc etc, but remain the htc logo on the black screen.
How can resolve this ?
Thanks a lot for your help.
Vito95
vito95 said:
Dear Supersport....
thanks for update...
but after the complete procedure (all report was ok), the phone dont restart.
i can see the rom number...etc etc, but remain the htc logo on the black screen.
How can resolve this ?
Thanks a lot for your help.
Vito95
Click to expand...
Click to collapse
Have you tried to flash another ROM to the phone and see if that gets it going again?
First of all thanks to you SuperSport and GRUPTNT for this
But for me, unfortunately, it doesn't works, i'm unable, when running Mtty116, to get the USB connection. I got Vista and i think it's the problem.
If somebody got an idea about it...
kabtv said:
First of all thanks to you SuperSport and GRUPTNT for this
But for me, unfortunately, it doesn't works, i'm unable, when running Mtty116, to get the USB connection. I got Vista and i think it's the problem.
If somebody got an idea about it...
Click to expand...
Click to collapse
yes, confirmed, you must XP
SuperSport said:
Have you tried to flash another ROM to the phone and see if that gets it going again?
Click to expand...
Click to collapse
Hi, after some hours the phone is restarted.
Now the only problem is that in comm manger application, Wlan dont work.
remain in off state (red botton).
can you help me?
regards
narshorn said:
yes, confirmed, you must XP
Click to expand...
Click to collapse
Please see this update.
Now, you can run MTTY in Windows Vista and Windows 7. I've made a Video Tutorial Showing how. It's Step 2b on this page:
http://forum.xda-developers.com/showpost.php?p=5314726&postcount=345
my god, you worked late yesterday on this...
thanks for this and everything else, but again, i think that nothing is going to be easy for me...first, if i disconnect USB from mobile center, it's not in the computer management anymore...so i can't change the driver...next if i reconnect the USB connection, i can find it in the device manager but i can't change the driver because:
On my Vista home premium(32 bits operating system) : ''The folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for 32-bit systems.
and on my Win7(X64 Home Premium): it's the same message except for X64
BTW, it's not the first time that i tried to flash EOM from your signature and i can't go all the way to the process...don't know why, it did stop before the end...but i got the splash screen
kabtv said:
my god, you worked late yesterday on this...
thanks for this and everything else, but again, i think that nothing is going to be easy for me...first, if i disconnect USB from mobile center, it's not in the computer management anymore...so i can't change the driver...next if i reconnect the USB connection, i can find it in the device manager but i can't change the driver because:
On my Vista home premium(32 bits operating system) : ''The folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for 32-bit systems.
and on my Win7(X64 Home Premium): it's the same message except for X64
BTW, it's not the first time that i tried to flash EOM from your signature and i can't go all the way to the process...don't know why, it did stop before the end...but i got the splash screen
Click to expand...
Click to collapse
Ok, I think I forgot to mention one step. Before you disconnect WMDC, be sure your phone is in Bootloader Tri-Color Screen Mode. (Also, before flashing any ROM, be sure to be in Bootloader Tri-Color Screen Mode. [Power/Camera/Reset]) Your Computer will Still be able to see the Phone in Device Manager after WMDC is Disabled.
I don't believe this will work on 64bit Windows. I tried and stopped after a couple failures.
I'm sorry your WLAN is not working still. That's not good and we will do our best to get you back to WiFi.
Looking at the Video again this morning, it does appear to go sort of fast. Hit Pause when needed to read the text pop-ups.
Next thing is I believe you may be selecting the wrong option when you browse for the driver. Be sure you are selecting the option: "Let me pick from a list of device drivers on my computer". If you get a warning that the driver is not the correct driver, BUT you have the option to go ahead with the installation, go ahead and install it. It's a Windows XP Driver, so Win7 will not suggest installing it. But when it's all over, you will be removing it again and reinstalling the Win7 Driver.
SuperSport said:
Ok, I think I forgot to mention one step. Before you disconnect WMDC, be sure your phone is in Bootloader Tri-Color Screen Mode. (Also, before flashing any ROM, be sure to be in Bootloader Tri-Color Screen Mode. [Power/Camera/Reset]) Your Computer will Still be able to see the Phone in Device Manager after WMDC is Disabled.
Click to expand...
Click to collapse
That was it...i succeed to install the driver and WIFi works again
SuperSport said:
I'm sorry your WLAN is not working still. That's not good and we will do our best to get you back to WiFi.
Click to expand...
Click to collapse
don't be, you do so much for the community here
Thanks again...
kabtv said:
That was it...i succeed to install the driver and WIFi works again
don't be, you do so much for the community here
Thanks again...
Click to expand...
Click to collapse
That was FAST , good work! Happy to hear it worked for you.
Also, be sure to delete the XP driver from Device Manager, and re-scan the system to install the original driver. And then, re-activate your USB Connection in WMDC.
kabtv said:
my god, you worked late yesterday on this...
BTW, it's not the first time that i tried to flash EOM from your signature and i can't go all the way to the process...don't know why, it did stop before the end...but i got the 3G Asia splash screen
Click to expand...
Click to collapse
did you experience that...?
kabtv said:
did you experience that...?
Click to expand...
Click to collapse
Did you use SSPL_TRIN.exe to enter Bootloader Mode before flashing? I think that is necessary for a full flash of OEM.
SuperSport said:
Did you use SSPL_TRIN.exe to enter Bootloader Mode before flashing? I think that is necessary for a full flash of OEM.
Click to expand...
Click to collapse
i used the sd card method...
kabtv said:
i used the sd card method...
Click to expand...
Click to collapse
You would still need to use SSPL_TRIN.exe to put the phone into a special Bootloader Mode because the OEM ROMs overwrite the HardSPL on your phone. This special mode allows that to happen.
Copy SSPL_TRIN.exe & your TRINIMG.nbh to your phone's SD Card Root. From your phone's File Explorer program, browse to your SD Card and tap SSPL_TRIN.exe to run it. If asked, go ahead and say "Yes". This will enter a special Bootloader from which you can flash the OEM's.
Only use this method to flash Back to OEM ROMs and NOT for Normal Flashing. You want to use the HardSPL's Bootloader to flash Cooked ROMs to protect your phone.
Download SSPL_TRIN.exe
And, remember, after flashing an OEM ROM, be sure to flash a HardSPL back on your phone BEFORE Flashing Custom ROMs again.
Sorry everyone for getting off topic. kabtv, if you need more help with this, PM me, I'd be happy to help.
SuperSport said:
You would still need to use SSPL_TRIN.exe to put the phone into a special Bootloader Mode because the OEM ROMs overwrite the HardSPL on your phone. This special mode allows that to happen.
Copy SSPL_TRIN.exe & your TRINIMG.nbh to your phone's SD Card Root. From your phone's File Explorer program, browse to your SD Card and tap SSPL_TRIN.exe to run it. If asked, go ahead and say "Yes". This will enter a special Bootloader from which you can flash the OEM's.
Only use this method to flash Back to OEM ROMs and NOT for Normal Flashing. You want to use the HardSPL's Bootloader to flash Cooked ROMs to protect your phone.
Download SSPL_TRIN.exe
And, remember, after flashing an OEM ROM, be sure to flash a HardSPL back on your phone BEFORE Flashing Custom ROMs again.
Sorry everyone for getting off topic. kabtv, if you need more help with this, PM me, I'd be happy to help.
Click to expand...
Click to collapse
Hi,
I have moved to hd, so I didn't come to this forum since then...
I will try to explain a little better the HSPL and official roms.
First, there are several HSPL for trinity. The best one is olipro 1.30, so this th eone we want to get into the trinity.
First the theory, in a .nbh file we have several parts: ipl,radio,spl,splash,os,extrom In an official rom contains all parts, a custom ROM normaly nowdays contains os only. Whith older kitchens contains splash+os
The HSPL of olipro is protected so it is not overwrited by the roms. So it is safer, and you can't get a brick if you don't flash the ipl part.
The SPL is the tricolor program, so when flashing you should view the spl that you have in the trinity.
Whith the customruu of the trinity there is a file called enterbootloader.exe which is transmited to the pda and executed to display the spl. This file is SSPL_TRIN.exe renamed.
Ok, so this are the scenarios:
1) you launch the romupdate whith as/wmdc connected:
Enterbootloader is transmited and executed -> Special SPL 1.07
So when flashing you will flash every part of the nbh (all for oficial, os for custom)
2) you enter manually in boot loader
The SPL in your device -> olipro 1.30
So when flashing you will flash only (ipl,splash,os,ext)
The safer method is to put manually the bootloader mode and flash. You can have the HSPL whith an offical ROM whithout worries. Though there is an exception: you want to update the radio.
If you want to update the radio use method one so you run the other SPL.
Related
Hi All
Have a problem with my latest phone. A so called friend told me to upgarde the ROM so as to remove all the T Mobile poop in it. So he gave me the software I started the upgrade all went well stage 1 then stage 2 and finally stage 3. It said Congrats just hit reset and the power button at the same time and its done. Easy Me thought..... Not Easy....... Its now just booting up and screaming at me. The screen wont lite up and nothing else. I have tries to reset over 10 times now.....Anyone got any ideas, have I shot and killed my new phone...
Ta JG
this is not good. do you know which phone you are having? MDA is all the phoen from t-mobile. First identify your phone. Then, you need to know if you are using the right ROM on the right phone. THEN, you have to know are you using the right phone ROM on the phone (eg G3 or G4).
Its an MDA Copmact 11 does that help....
common.. more info. which rom you've used?
Alpine_Ext-1.11.162_Radio-1.04_stuffstripped_Camera_Fixed.
SORRY i AM NEW TO THIS AND i AINT GOT A CLUE WHAT i AM DOIN...HE HE HE
Oh forgot to mention it all went in ok, stage 1, 2, 3 and even told me on my computer it had worked. It was when I tried the power and reset that it all came tumbling down........
JeanGenie said:
Oh forgot to mention it all went in ok, stage 1, 2, 3 and even told me on my computer it had worked. It was when I tried the power and reset that it all came tumbling down........
Click to expand...
Click to collapse
All I would like to do is get the old stuff back then worry about an upgarde later can this be done without me having to do unspeakable things to the phone????
You've just flashed your Charmer phone with an Alpine ROM. If that doesn't kill your phone, I'm not sure what will.
Ok, try this. Hold down all 3 buttons -> power, camera, record buttons, and poke the reset. See if you can get a 3 colours screen.
If you get that, close active sync (stop the process WCESCOMM.EXE), connect your phone to your PC (when it is displaying the 3 colour screen). Then you ought to be able to run the ROM update file (EXE) from t-mobile (check the Charmer Wiki) and that may fix your problem.
hanmin said:
You've just flashed your Charmer phone with an Alpine ROM. If that doesn't kill your phone, I'm not sure what will.
Ok, try this. Hold down all 3 buttons -> power, camera, record buttons, and poke the reset. See if you can get a 3 colours screen.
If you get that, close active sync (stop the process WCESCOMM.EXE), connect your phone to your PC (when it is displaying the 3 colour screen). Then you ought to be able to run the ROM update file (EXE) from t-mobile (check the Charmer Wiki) and that may fix your problem.
Click to expand...
Click to collapse
I have done what you have said, I think...DUHHHH the screen has not lit up but its now showing USB in the top and V1.02 in th ebottem. I have connected it to my computer but active sync has not cut in yet....... I assume I have done it wrong....
hey
you DONT want activesync to cut in
put it in that 'usb mode' that you managed to get and just run the OFFICIAL T-Mobile rom update utility, but make sure to kill the wcesscomm process in windows' task manager.
good luck!
duke_stix said:
hey
you DONT want activesync to cut in
put it in that 'usb mode' that you managed to get and just run the OFFICIAL T-Mobile rom update utility, but make sure to kill the wcesscomm process in windows' task manager.
good luck!
Click to expand...
Click to collapse
I have just downloaded the t-mobile update as below
RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
I have switched off the file as you have said in the task manager. The update laods then says cannot find MDA Device connection error 274.
Could a system restart help?????
Sorry for all this, maybe stick to things I do know in the future, like washing my car.......
hey
get your phone back into that screen which had 'usb' written on it.
then do this:
download and install a program called 'winrar', you've probably heard of it and in all likelihood already have it!
once its installed, right click that t-mobile update you just download and select the 'extract to.../' option that will come up in the drop down menu, let it extract to the folder it does, open the folder in there will be a few files: you want the file which is called something along the lines of 'upgrateUT' or RUU Upgrade UT, it'll be an exe,
connect your phone up to the computer (with it in the USB mode and activesync disabled) and run that exe, it should go through as normal
good luck
(if you want any help just post back! best bet is for you to extract the files and report back with the name of the files in the folder!)
duke: I think he did that. He downloaded the EXE from http://www.tm-phonedownloads.com/download_manager_mda_com2.html
and it seems not able to detect his Charmer.
JeanGenie: Just to make sure, when you run that EXE, you have the phone connected with it displaying USB?
duke_stix said:
hey
get your phone back into that screen which had 'usb' written on it.
then do this:
download and install a program called 'winrar', you've probably heard of it and in all likelihood already have it!
once its installed, right click that t-mobile update you just download and select the 'extract to.../' option that will come up in the drop down menu, let it extract to the folder it does, open the folder in there will be a few files: you want the file which is called something along the lines of 'upgrateUT' or RUU Upgrade UT, it'll be an exe,
connect your phone up to the computer (with it in the USB mode and activesync disabled) and run that exe, it should go through as normal
good luck
(if you want any help just post back! best bet is for you to extract the files and report back with the name of the files in the folder!)
Click to expand...
Click to collapse
okie dokie...have extracted all th efiles and these are what I have got in a seperate folder
EnterBootloader
nk.nbf
README
ROMUpdateUtility
RUUGetInfo
RUUResource.dll
Thats all the files inside the folder
is "ROMUpdateUtility" an EXE file? try running that.
hanmin said:
is "ROMUpdateUtility" an EXE file? try running that.
Click to expand...
Click to collapse
I have and after a few seconds it says error 274 cannot find device....!!!!
well, it is amazing that you can go into the bootloader at all. I'm suspecting that the bootloader is not the Chamer bootloader, hence the ROM update EXE is not able to find it. Where did you download the Alpine ROM. Give exact link.
UPDATE: Look at the post here
http://forum.xda-developers.com/showthread.php?t=269329&highlight=
by 'windowsceportal'. He is able to flash the phone with 'Prophet RUU 2.5.2 noID check' with the DLL RUUResource.dll of Charmer RUU. I'm not very certain, but the noIdCheck may able to help.
UPDATE: As according to this post
http://forum.xda-developers.com/showthread.php?t=280128&highlight=
the bootloader mode that you are having is that of an Alpine (Charmer's bootloader mode is a screen with 3 colours). So, probably the updating program doesn't work. However, as an idea, you may want to try getting alpine upgrading EXE files to load Charmer ROM into the phone. It is an idea, not sure how can this be achieved.
hanmin said:
well, it is amazing that you can go into the bootloader at all. I'm suspecting that the bootloader is not the Chamer bootloader, hence the ROM update EXE is not able to find it. Where did you download the Alpine ROM. Give exact link.
UPDATE: Look at the post here
http://forum.xda-developers.com/showthread.php?t=269329&highlight=
by 'windowsceportal'. He is able to flash the phone with 'Prophet RUU 2.5.2 noID check' with the DLL RUUResource.dll of Charmer RUU. I'm not very certain, but the noIdCheck may able to help.
UPDATE: As according to this post
http://forum.xda-developers.com/showthread.php?t=280128&highlight=
the bootloader mode that you are having is that of an Alpine (Charmer's bootloader mode is a screen with 3 colours). So, probably the updating program doesn't work. However, as an idea, you may want to try getting alpine upgrading EXE files to load Charmer ROM into the phone. It is an idea, not sure how can this be achieved.
Click to expand...
Click to collapse
This is the link i used to get the original upgrade
ftp://xda:[email protected]_Radio-1.04_O2stuffstripped_Camera_Fixed.rar
Does that help any...
JeanGenie said:
This is the link i used to get the original upgrade
ftp://xda:[email protected]_Radio-1.04_O2stuffstripped_Camera_Fixed.rar
Does that help any...
Click to expand...
Click to collapse
Is there anyway of just deleting the Alpine ROM and reinstalling the correct charmer. I, as you have probably guessed aint got a clue what I am doing never lone saying...he he he
Just a thought.......
Plus my new XDA IIi was delieverd today am I being silly when I say I have been told that I can debrand it with the Alpine rom as listed above, dont want to try anything incase this phone goes belly up also....
Hellllppppp...........
Its me again, can anyone make any other suggestions to my problem please. I have tried in vain to do what has been already suggested but it seems either it wont work or more to the point I have no clue as to what I am doing.
Hi, all, i have problem with my SPV 700 (HTC 3600) - Trinity.. When I turn on it, I see only start screen eith HTC logo, (you'll see it in attachments) there is only M 05 B05, R 1.50.08.11, g 32.83.7020.20h, D 3.00, i can do nothing... I cant reflash ROM because my computer cannot find it, and instalation write updater is old, you must find newer updater.. When i install acivesync, it cannot find too, but my installers (5 downloaded) will start, but write Cannot find hardware. (or mobile phone). Is any program, to connect my htc, or reflash ROM?
I found Schaps_WM6Pro_Trinity_4.30.2008_WWE_Full(p3600I) or some next, but every write cannot connect. Thank you very much.
Load from mini SD!?
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!
I cant go to tricolor display, i cant reset, i cant do anything, i thing it freeze.. sorry my english, im from slovakia. Or.. how I can go to tricolor mode? I try all combination clicks.
Power+Camera+reset button with ur touch pen
sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?
OverrideCrash said:
sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?
Click to expand...
Click to collapse
Man please read from instruction from the passage named HARD RESET, the button you are talking about its for software reset only!
Use the seq. Power+Camera+reset!Keep each button pushed and then use stillus for reset and you will get the Tricolor screen - but first format your SD like i describe in the post #2 and then copy your ROM on it!
exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
check this thread
http://forum.xda-developers.com/showthread.php?p=1923734
manos4596 said:
exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
Click to expand...
Click to collapse
Hard reset your phone first, then use the bootloader method(Camera+Power+Reset then in the bootloader connect the usb cable)!
First try this http://forum.xda-developers.com/showthread.php?t=299659
If not - read carefully the instructions from here:
- http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66 - all you have to know about hard SPL and how to do.
Anyway, also try to change the Rom image that you have used when you bricked your device!Try a new ROM by the date of release!
Thnx for the advice! I got it working. Before reading your reply I had started installing the original rom provided by htc (WM5). It installed correctly and at least i have my phone back. I will check your links about hard SPL (thanx ) but i had installed the gelly_01 rom before , not through vista though.
I will try to reinstall it.
It's getting late here so i will check it tommorow and infirm you.
Regards.
problem solved Its working now, but I dont know how i repair it
for unlock CID HTC_Hermes_SIM_CID_Unlock_v3a.zip (Its not compatibile, but my opinion is it unlock but dont repair rom) then i give there [P3600i] HardSPL v1.1.rar and end is Trinity_WM_6.1_NEW.OS_19965_Diamond_edition_by_Akeo_V3.1.rar all files are in attachments.
I give there HTC_Trinity_SIM_CID_Unlock_v1.zip too, before Akeo Diamond edition.
This can be closed now. Thanks for all thank you ! Here are lot of good peoples really thx
slimul said:
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!
Click to expand...
Click to collapse
Thanks a lot . i had the same problem but now my htc is back to life
i
i still have the problem with the rom , i just do every thing and don't work can any one cold help me
sorry the bad english
As newbie on this, anyone please guide me step by step to upgrade my P3300 rom with nbh file. My device is unlock already with current ROM 5.2.1908 (build 18125.0.4.2).
The procedure is given in almost every thread. It's simple really. Is your SPL version anything other than 1.11.0000 or 1.11.cmon? If yes then your phone is not unlocked. Unlock your phone by running USPL from here or the updated USPL from here.
Check if the USPL has worked by checking your SPL number. During phone booting at the white HTC screen your SPL should show either 1.11.0000 ir 1.11.cmon.
If it does you are free to flash any ROM. Get the ROM of your choice, put your phone into bootloader mode by pressing the voice record, power key and reset button simultaenously for about 5 seconds till you see a three colored screen. Attach it with USB and flash the rom using RUU.
thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted
stacknickel said:
thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted
Click to expand...
Click to collapse
do u have only .nbh file or along with .nbh file any other files are there ?
generally along with the .nbh file there are other files like romupdateutuility.exe etc.,
download those files also and save those files into your PC.
after unlocking your device then staup the device with bootloader mode (three color screen)
connect the Device with the PC by USB cable.
in the device display u will a word USB (left bottom corner)
run the Romupdateutility from the PC...
the process will guide u next steps ...
after the completion u will have new OS
Last I would recommend tht u also upgrade you Radio ROM (this is responsible for all the communication functions of ur phone i.e. calls, GPS, WiFi etc) which will enhance the communication capabilities.
Radio ROMs Link : http://wiki.xda-developers.com/index..._RadioUpgrades.
Note : before flashing any ROM or upgrading the RADIO kindly CID unlock your device or you will end up the with bricked device .
You can download my ROMs, they come with the full package
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
your device not properly CID unlocked...
unlock the device properly with USPL...
stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
As sixthsigma said, did you check if the phone is correctly unlocked? Is the SPL showing 1.11.0000 or 1.11.cmon?
Secondly, what OS are you flashing on? XP, Vista or Windows 7?
Hi Randythered, IPL 1.25.0001 and SPL 1.27.0000
I am using your ROM RtR Manila v1.0
using XP
Well, firstly thank you for wanting to try out my ROM
Secondly, you haven't unlocked your phone properly yet. The SPL must be 1.11.0000 or1.11.cmon, depending on which USPL you use.
strange... hv tried several time but w/o luck...
now I notice that it cut out after '70' and jump into 100 with disconnecting
any choices of other USPL instead of the one attached here?
Did you flash the old USPL or the new one which is nosize? It is preferable to install the old one first. And then go for the cmon nosize USPL if need be.
From a noob to a noob
Hi, heres the procedure for upgrading your rom put as noob friendly as i can put it.
WHAT YOU NEED
1. HTC Artemis p3300
2. computer running Windows XP with activesync installed
3. Usb cable to connect to computer
4. The new rom that you want to flash
5. And USPL which can be downloaded at this page http://forum.xda-developers.com/showthread.php?t=311403
NB: For most of the newer roms you will probably need the updated nosize version of uspl http://forum.xda-developers.com/showthread.php?t=521406
PREPARATION
NB: Anything you need to backup or keep from your device do it now.
NB: in some cases you may have to hard reset your device before it will take the flash
1. Extract Uspl to your desktop
2. Extract the rom you downloaded to your desktop
3. Remove your sim chip and memory card from your device
4. Reset your device and sync with windows xp
UPDATING
1. In the USPL folder run the program called "start_uspl" and let it do its thing in the dos window,in
my case it goes to 70 and then jumps to 100,if you have been watching your device screen you will
see the linux penguin for a few seconds and it will change to a white screen.
A window will popup on your computer, do as it requests, when finished it will reset your device.
Sync your device with your computer again.
2. In your downloaded rom folder you should find a file called "ROMUpdateUtility.exe" or "Ruu.exe", run
it and a window will popup, do as it requests.
Your device screen will go tri-color(red,green,blue) and the rom update will begin, wait till it
finishes and thats it.
thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading
stacknickel said:
thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading
Click to expand...
Click to collapse
same ting got me with my first rom thats why i thought to put it in, happy flashing (not in the naked way )
Lol I can't belive I forgot to tell you that!
It's ok. Thanks to u too randythered.
Do you have dedicate Manila in cab file?
Thank you, here you go!
sixthsigma said:
your device not properly CID unlocked...
unlock the device properly with USPL...
Click to expand...
Click to collapse
Sixthsigma...you said - "unlock the device properly with USPL..." - how do I do that?
I got the same error as mentioned when trying to flash using the numb3rs ROM:
http://thewingster.com/numb3rs.aspx
I ran the herald-uspl.exe file. and ended up with teh above error. My TMo Wing has the original ROM on it and the phone itself is probably unlocked. Ive had it for a year now. Do I need to call TMo to unlock or is there some app I can run to do this myself?
appreciate any help!
nevermind, it worked ok on the second attempt!
First of all, hi, i was reading a lot from this forum, and i must say, im impressed. Nice job!
Anyhoo, im running WM 6.1 (Lite) (http://forum.xda-developers.com/showthread.php?t=364031) on my HTC TyTn.
Now id like to flash it into, i dunno, the full version, or 6.5, or something else, but it wont.
I connect it through active sync(on my desktop pc), and i run 'Force Using Safe SSPL', i get the error : ERROR 246. The Update Utility cannot get response from your PDA Phone. Please check that your USB cradle/cable is connected properly between the PC and your PDA Phone. And also check your PDA Phone.
Click 'Exit' to quit.
I tried to run SPL-2.02/2.10/2.30 and then it goes into bootloader, and at 1% it says 'file corrupted'.
I tried those things on my laptop, too, but still the same problems.
Can anyone help me?
Rgrds
Install NetFrameworks from v1 to v3.5 make first your device is runing a functional rom.... or your rom... then perform the Hardspl v7 by olipro hardspl 2.10 and then try to upgrade some other... the fact here is.... how could you have 6.1 and now you are trying to make hardspl... oh bTW dont use SSPL please you gonna damage your device if it is not ready damaged.
Do i install NetFrameworks on HTC or on my PC?
Why not use SSPL? Which option should i use?
Do i install NetFrameworks on HTC or on my PC?
Why not use SSPL? Which option should i use?
hi,
when i try to perform the Hardspl v7 by olipro hardspl 2.10 i the following error:
Error 206 update problem
http://img97.imageshack.us/img97/107/48319879.png
please help me
nvr, worked it out.
Try this,
1. Make sure you have HSPL 2.10 or New Bootloader
2. Put Your device into bootloader mode (Until there a "SERIAL" in the bottom of ur device), connect it to PC (Now "SERIAL" change to "USB")
3. Run 838Pro_SEA_ENG_WM6_Upgrade_20070712 (official ROM or U can RUN other official ROM can be found on www.htc.com ), don't click "AUTODETECT",
4. Checklist the option button of SPL-2.02/2.10/2.30 New Bootloader and Is it Hard-SPL?, after that just click next2 until flashing started
5. If it didnt work repeat step 1-3 and checklist the option button " Force Using Safe SSPL " then follow all flashing step
6. Run AT&T Strip, link: http://www.4shared.com/file/61372397/e2bf76c0/official_ATT_WM6_striped.html
7. Flash WM6.5 ROM you want
Hope its usefull cause I use this when my hermes couldnt load and every flashing it's stuck on 1%
Good Luck
ksemeks said:
nvr, worked it out.
Click to expand...
Click to collapse
I'm having similar problems too, Please kindly share how you worked it out.
Hello hello
I'm quiet noob in english and android ^^.
Since 2 days i'm trying to install froyo on my device!
I can't flash my device! I tried many differents .nbh files but no changes
I really need your help!
I'm following this tutoriel: http://forum.xda-developers.com/showpost.php?p=10424799&postcount=451
And this android version:Incubus RS16
this is the .nbh file used: http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
This is the screen i got when i try home+camera on boot: http://img713.imageshack.us/img713/4931/dscn2273.jpg
If you have questions..... Thanks for your helps!
Use this guide.
http://forum.xda-developers.com/showthread.php?t=680518
its better to download the latest KAISimg.nbh from ATools.
and make sure you have formatted your sd card to fat32 , in order to flash the kernel and install everything without errors.
Follow the guide in atools help.
Thanks for yours link
I follow them step by step but i still have the same problem!
It's amazing pls help me guys! i really need my phone.
hardspl 3.34 is ok Radio is ok
I follow atool tuto step by step.
When i put the sd card in the mobile and open the bootloader, the 3color screen appears net the white screen but he disappear in the last second
Any suggestion?
Verify the filename or maybe it could be a sd problem (try with another one)
Don't flash with SD, use USB instead. My Kaiser refused to work with SD, but works perfect over 50 flashes later with USB. I am using Windows 7, I just plug the kaiser in and let windows detect that something is there. Then I download the update for WM device center or whatever they renamed activesync to since vista lol. Afterwards it will detect well enough. Once it does I use RUU custom and just flash it over usb with that Kaisimg file. Not a well written guide I know... I can at least send you my ruu custom if you need it.
thanks for help
I'm under XP. I install active sync but inpossible for my device to be connected on the pc.
I'm losing my head lol!
levitz_kais said:
thanks for help
I'm under XP. I install active sync but inpossible for my device to be connected on the pc.
I'm losing my head lol!
Click to expand...
Click to collapse
as per your screen shot. you phone is in boot loader already.. active sync only detects phone wen its running windows.. you dont need to sync your device with active sync when its already in boot loader.. just connect it with pc and run update utility of windows rom u want to have on your phone.. or update utility with android kernel to boot android in it.. your phone will be working in no time..
Yep Activesync will see something is there but it isnt a WM device basically. That is good enough to let RUU Custom work.
Thanks guys i'll try this in the minute!
EEdit: it won't work can you explain me more how to install android with RUU custom? pleéase
levitz_kais said:
Thanks guys i'll try this in the minute!
EEdit: it won't work can you explain me more how to install android with RUU custom? pleéase
Click to expand...
Click to collapse
Format your SD Card in FAT 32
use HP USB Disk Storage format tool (find it somewhere over google)
Edit: http://files.extremeoverclocking.com/file.php?f=197
and make sure that the nbh is renamed as kaisimg.nbh.
For instance only put the nbh on your SD card (nothing else) and try flashing.
I am using HSPL 3.59 and its going good. (before that it was 3.34 and never caused any problems) Radio Version 1.70.19.09