Related
Hi, a friend have 2 pda universal from vodafone that he has flashed and killed. I don´t know what happend. pda always shows USB and v1.00. After a lots o rom updates still dead, i have JAFWM, but with or without this machine is dead.
any rom especial version?
any soft?
thanks.
1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.
device always start in bootloader mode, i flash all times without problems, but when i restart device, automatically puts on bootloader mode.
after flash, make factory settings but,after this, restart in same mode.
always, when i run update program soft MaUpgradeUt_noID, detects no rom in pocket loaded.
strange problem on 2 pda´s ?
thanks
That shouldn't be a problem. Just continue to flash the rom. There could be a problem with your bootloader and the upgrade version (AKU2) you want to use.
Maybe it's a problem with bootloader.
Try it, maybe it will help you.
http://forum.xda-developers.com/download.php?id=11414
i think same as you, only problem with ROM image, but i have flashed many roms but I can´t revive device. So i ask name of Rom tht can revive pda.
Br.
PD. how i can flash the archive attached?
The rar file mentioned above is only the bootloader you already got on your device.
In your case i would use an old AKU1 rom and to see if it works.
hi guys
i have same problem. show only boot loader mode. how to use this boot loader file. wich AKU1 file is working. my phone is MDA PRO from germany T-mobile, i wan't to update ro to English. after flashing many times, many rom no result. help me
thanks a lot
Hello Siemens Man
Which Bootloader do you have ?
It would be great if you could make an backup of your bootloader then, that i could downgrade my phone and try to unlock it.(If do not know how to make an backup, thats no problem, because i can show you how to do it)
greetz
hi man
i have in boot loader mode. show me usb v1.00 only. i don't have buck up for my phone. please tell me solution how repair my phone.
thanks a lot
Did you try to update your phone to the latest orange rom for testing yet ?
If not try it out (I know it is said to be slow, but only if all orange customizations are installed) If it runs then its ok.
Otherwise try to use the exitbl.exe mentioned somewhere in this forum, hopefully it works.
connect to mtty and issue set 14 0 and then restart the device or use exitbl utility by buzz
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
are there any useful hints extrem69 ?
no usb mode
What can i do of my Qtek 9000 doesen't change from Serial to USB mode?
siemens man said:
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
Click to expand...
Click to collapse
I had same problem like you, can you tell me what exactly did you do so you can repaire your phone.
I used T-mobie and didn't work after upgrade rom too, it's alway stop in boot loader screen. I tried up rom of T-mobile, Imate, Dopod but nothing to work, I don't know how to repair it, it's still can up rom normaly, nothing wrong while upgrade, it's only don't work after finish.
wooooooooooooooooooow
many thanks
i tried many ways to solve this problem
with your advuse it is working now.................
Lt.Cmdr.Ivan said:
1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.
Click to expand...
Click to collapse
HI to all! I have lost bootloader upgrading my qtek 9000 vodafone.
can i to solve problem? No bootloader menu, i have tried power+reset+lamp, power+reset+camera - herd reset with - + - reset without effect. Pse help me!!! Thanks.
Hi guys.
I was using the installed the FInixNOver 3.0.1 ROM onto my SPV M700 and it was great. I've had it for about 2 weeks without any problems.
Last night I looked at my phone, only to realise that it was completley dead. This didnt shock me to much because the battery was running low, and i decided to let it die completley before recharging it again.
I charged my phone overnight and switched it on this morning, but the phone would freeze at the 'FInixNOver' splash screen (the numbers at the bottom of the screen would appear overlaying the splash, but the phone wouldnt go pass this point).
The only way to turn off the phone from this state is to eject the battery. I have tried removing the sim card, turning it back on in as many ways as possible but to no avail. I am able to get to the TriColor test screen (im running IPL-0.50 / SPL-1.30.Olipro) but with all the custom roms available, they all use the ROMUpdateUtility which requires the phone to have established an activesync connection initially (but this would mean my phone would have to be 'on completley' - so this is catch 22.)
For the record, my phone/battery died while my wired handsfree was attached (dunno if thats of any interest to anyone or the rom baker).
But it looks like the only way i'll be able to flash my phone is by finding a way to install the .nbh file without using the RUU method. Because I can put my phone into test mode manually.... any help or guidence would be very much appriciated.
Thanks.
Ok can you get it into bootloader? power/camera buttons and reset?
sorry didnt read fully.
right get your device into bootloader first,
then open active sync (are you using xp)
then open connection settings and disable usb connection,
put your device into bootloader mode, then run any rom upgrade, i prefer the WM6.1 pdaviets from HERE (Username: PDAVIET / Password: pdaviet)
Your pda does not need active sync with ruu's, so no catch 22. if you turn off usb connection in active sync, you can still run ruu and it will be recognised, unless you are using vista, where you need to change your HTC SYNC drivers.
Thanks for your quick response...
Yes I can get into boot loader using the power and camera buttons (or holding the power and camera buttons when resetting the phone)...
When the phone is in boot loader mode, active sync doesnt even detect the phone anyway, but nevertheless, I have followed your instructions and disabled the USB Connection. (BTW, yes i am using XP)
The phone is still in boot loader mode, so now i try and execute the ROMUpdateUtility.exe and go through the steps, at the 1st step i tick the tickbox and click next, and the 2nd step i tick the tickbox and click next. (this step says DO NOT enter the bootloader manually? - but i have havent i?) anyway, when i click next, it says... "Verifying the information on your Trinity... Please Wait..." for about 10 seconds, and then i get a message "ERROR [260] : CONNECTION"
What am i doing wrong?
Huumm.. why dont you flash your phone throw the sd card??
Read this link:
http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing
try to flash your phone with some official rom and after that flash it with any other you want!
manos_23 said:
try to flash your phone with some official rom and after that flash it with any other you want!
Click to expand...
Click to collapse
I would recommend this option above, to be safe, i usually get them error messages when the battery is below 50% or sometimes i try it again and it works. it does state do not manually enter bootloader but i always do it this way.
also make sure active sync is not still running in taskmanager under the alais: wcescomm.exe and WCESMGR.exe, end them both.
I've just tried using an official ROM, but the problem still occurs with the 'connecting'. It doesnt seem that the computer picks up a connection to the phone whatsoever.
Should i be concerned that at the bottom of the bootloader screen it says "serial", is this correct?
Im starting to get annoyed now.
Bye,
the bottom of the sreen mast say "usb" not serial.
it seems there is a problem, if it states serial. as it should say usb. try THIS
Seems like the problem was that my USB lead was loose and made a bad connection, hence why the bootloader showed 'serial' and not 'usb'... as soon as i wiggled it and heard the 'connection noise' in windows, i knew i was good to go, and so using the RUU worked fine to reupdate my phones ROM.
Thanks for your help.
My only question is that why did it happen in the first plave?
WIZZKID - I just saw your post here now. I have to tell you that I also saw "SERIAL" at the bottom of the bootloader screen and not "USB". As I said I returned it to get another phone but maybe I will try something else for now instead of a P3600i. I will monitor your thread to see how it turns out for your phone, because it seems that we have the same problem.
if you see "serial" instead "usb" your problem is in the usb cable, usb port from your computer or in the usb connector from your trinity!!!!!
I was having the same problem that you have!! my problem was from my usb from mine trinity!! see if the conector is at good conditions !!!
Well as some of you may know, I got my Trinity replaced for sticking at the WM splash screen after a few days. This second one - I have had it ONE night - and the same thing has happened with incomplete booting. This time I have been trying all night to flash the phone to an official ROM, but I cannot do it (apparently) because I can't establish a connection via ActiveSync. When I stick the data cable in while in bootloader I see SERIAL replaced by USB and when I try the flash I get a "270" error (cannot connect to phone) and the phone re-boots to the sticking plash screen. What should I do now?
ladies and gentlemen...
we've got a lot of mixed messages in this thread.. please make sure you're posting the right thing. no need to disable USB when manually going in to bootloader to flash (at least in xp).. Also, you can ignore the part of the RUU that says 'do not manually enter bootloader' (you should really read the guide on my site)
foxuniform- can you please give some details..
1) are you running xp or vista
2) have you flashed hard-spl? if so what version?
in the mean time, try a couple of things.. first, flash hard-spl (even if you already have it, but from the sound of it i think you don't have it on your device).. if that works, try to flash an official ROM. Can also try to use splxploit, then flash hard-spl, and then flash official ROM (there's a guide on my site if you're unsure)
please post your results
*edit*
here are the steps for SD card upgrade, but i HIGHLY recommend flashing Hard-spl first..
try to do it from SD card. how?
Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract (http://www.cabextract.org.uk/) .
Rename the .NBH file to TRINIMG.nbh and copy it to the root folder of your miniSD card.
With miniSD card inserted on the phone, start the bootloader (hold Power button on right side and Camera button at same time and stick with stylus in RESET on bottom).
You should see the screen pictured on the left, confirm flashing on screen by pressing the power button.
Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.
When flashing completes soft-reset your device.
Make sure your SD has FAT32 and has no label. There have been reports that if SD has a label the bootloader can not access the TRINIMG.nbh
racerx_ I have carefully read your response and suggestions, and thanks for your expertise input on the matter. I am fairly new to this stuff so read below carefully as you may find errors in the way I tried to go about doing what I was hoping to accomplish.
First let me answer your questions. I am running Windows XP. The phone is in it's completely natural state in that I have not flashed it in any way. The ROM I was TRYING to flash to the phone while it was not starting properly (this is where I manually entered bootloader) is an official ROM from the HTC website (please note everyone that when I registered my P3600i on the HTC website it came up as the Dopod 810). Anyway, that never worked. ActiveSync never detected the phone (and I guess that's the reason I could not do anything as far as flashing goes). I HARD-RESET my P3600i and it booted normally. I re-installed all the stuff I had on it, from memory card to various .cab files, and the phone is working beautifully thus far. I will report if anything funny happens again.
I have to ask you racerx_, if I CAN flash hard-SPL on the P3600i according to the lovely guide on www.trinityguides.info. I have been of the opinion that things don't work for the P3600i as they did for the P3600, and that has been echoed by many P3600i users on this forum who are ready and waiting to try out some cooked ROMs (myself included).
For the sake of record, my phone is running rom version 3.00.707.17 and radio version 1.46.00.11. I patiently await your response.
woaaahhh..
i didn't notice the 'i' in your previous post... yeah, as far as i know, these ROMs are not flashable on your p3600i.. sorry..
**correct me if i'm wrong somebody**
Yeah I kinda thought that would be your response. By the way - do you think that this phenomenon of sticking at the Windows Mobile splash screen (both the P3600 and P3600i models apparently) has anything to do with something users do with the devices, or you figure it's an inherent software glitch of some sort? I am wondering if I should try a different model or hold on to my P3600i? Hope it's not something that'll happen again - I fly for a living and it's not gonna be good to have the thing screw up on me away from base - I really count on it for everything from casual keeping in touch on Messenger to viewing my work schedule. I love the Trinity though - it's one of my all-time favourite HTC phones.
hmm... i don't think its inherent in the Trinity.. (not a hardware issue.. in my opinion)
its been a while since i followed the posts on it, but always seems to be software related.. sometimes ROM-specific problem. Personally, i've probably flashed as many ROMs as anyone and the only time i ever encountered problems was with the official HTC WM6 ha.. go figure.. I think ppl did find that hard resets before and after flashing are helpful as well..
i love my trinity, and there's not much else on the market to make me want to trade it in (is it just me, or have pda's kind of stopped getting cooler).. i'd stick with it..
Hi, all, i have problem with my SPV 700 (HTC 3600) - Trinity.. When I turn on it, I see only start screen eith HTC logo, (you'll see it in attachments) there is only M 05 B05, R 1.50.08.11, g 32.83.7020.20h, D 3.00, i can do nothing... I cant reflash ROM because my computer cannot find it, and instalation write updater is old, you must find newer updater.. When i install acivesync, it cannot find too, but my installers (5 downloaded) will start, but write Cannot find hardware. (or mobile phone). Is any program, to connect my htc, or reflash ROM?
I found Schaps_WM6Pro_Trinity_4.30.2008_WWE_Full(p3600I) or some next, but every write cannot connect. Thank you very much.
Load from mini SD!?
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!
I cant go to tricolor display, i cant reset, i cant do anything, i thing it freeze.. sorry my english, im from slovakia. Or.. how I can go to tricolor mode? I try all combination clicks.
Power+Camera+reset button with ur touch pen
sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?
OverrideCrash said:
sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?
Click to expand...
Click to collapse
Man please read from instruction from the passage named HARD RESET, the button you are talking about its for software reset only!
Use the seq. Power+Camera+reset!Keep each button pushed and then use stillus for reset and you will get the Tricolor screen - but first format your SD like i describe in the post #2 and then copy your ROM on it!
exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
check this thread
http://forum.xda-developers.com/showthread.php?p=1923734
manos4596 said:
exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
Click to expand...
Click to collapse
Hard reset your phone first, then use the bootloader method(Camera+Power+Reset then in the bootloader connect the usb cable)!
First try this http://forum.xda-developers.com/showthread.php?t=299659
If not - read carefully the instructions from here:
- http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66 - all you have to know about hard SPL and how to do.
Anyway, also try to change the Rom image that you have used when you bricked your device!Try a new ROM by the date of release!
Thnx for the advice! I got it working. Before reading your reply I had started installing the original rom provided by htc (WM5). It installed correctly and at least i have my phone back. I will check your links about hard SPL (thanx ) but i had installed the gelly_01 rom before , not through vista though.
I will try to reinstall it.
It's getting late here so i will check it tommorow and infirm you.
Regards.
problem solved Its working now, but I dont know how i repair it
for unlock CID HTC_Hermes_SIM_CID_Unlock_v3a.zip (Its not compatibile, but my opinion is it unlock but dont repair rom) then i give there [P3600i] HardSPL v1.1.rar and end is Trinity_WM_6.1_NEW.OS_19965_Diamond_edition_by_Akeo_V3.1.rar all files are in attachments.
I give there HTC_Trinity_SIM_CID_Unlock_v1.zip too, before Akeo Diamond edition.
This can be closed now. Thanks for all thank you ! Here are lot of good peoples really thx
slimul said:
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!
Click to expand...
Click to collapse
Thanks a lot . i had the same problem but now my htc is back to life
i
i still have the problem with the rom , i just do every thing and don't work can any one cold help me
sorry the bad english
Hi,
I'm using Artemis with one of Tom's ROM. The device was working well. But today suddenly the device won't start up - it is locked at the startup screen showing the SPL, IPL etc. I can enter the bootloader.
Can anybody tell me how to flash the ROM at this stage?
Flash from bootloader
Hi!
Please download an official rom and keep pressed the Power and Record buttons. You will see a screen with 3 colors (red green blue). Connect the USB cable and wait for Activesync. After this start the original rom flasher and follow the instructions. If you can start the Windows, you should flash the USPL again and you can flash cooked roms. If you flashed a new one, i think you should also upgrade the radio rom.
Sorry for my English
well i'll give it a try.
BTW will activesync work if the phone is not booting up?
sure it will, but make sure you have the only phone pluged in, nothing else, and disable all firewalls and antivriuses.
Good luck
i flashed with htc official rom and it worked first. after soft resetting a few time (due to program installation) the phone again back to earlier state.
it is showing:
ipl 3.13.0001
spl 3.13.0000
gsm 2.94.90
os 3.13.0.0
and stuck at this screen.
i tried to update the phone again with the same rom - but i'm getting error 270.
do i need to unlock cid before flashing?
but i can't use the uspl tool as i can't connect to activesync.
pls help.
make sure the battery is fully charged again.
Restart your PC, isbale ll antivirus and firewalls
Better if flashing in XP PC
put PPC in Boating status
Flash Shipped ROM
Specify which software caused you the trouble and do not install it again
CID unlock PPC
Flash any cooked ROM.
once i flashed the phone with the shipped rom successfully. The phone was CID unlocked then. But now when I try to flash the shipped again i'm getting an error message (error 292 or something - stating-invalid vendor id)
archat68 said:
once i flashed the phone with the shipped rom successfully. The phone was CID unlocked then. But now when I try to flash the shipped again i'm getting an error message (error 292 or something - stating-invalid vendor id)
Click to expand...
Click to collapse
you must unlock phone again.
I tried flashing the device with factory shipped ROM. but i'm getting Error 294-invalid vendor id message.
please suggest what to do?
chance are you have stuffed your bootloader...
start from scratch again by running uspl:
http://forum.xda-developers.com/showthread.php?t=311403
than flash your favorite rom again, ideally via sd-card-flashing:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
greetz
thormdac said:
chance are you have stuffed your bootloader...
start from scratch again by running uspl:
http://forum.xda-developers.com/showthread.php?t=311403
than flash your favorite rom again, ideally via sd-card-flashing:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
greetz
Click to expand...
Click to collapse
USPL needs activesync running. Can you tell me how to run USPL when I can't boot into windows?
well,
its been some time, but i am pretty sure uspl puts your device into bootloader and operates from there...
have you tried setting it into bootloader, connecting via usb and simply starting uspl?
running a normal setup-routine, there is no need to start it from wm either-simply put it into bootloader and start setup!
greetz
Well i tried that. But it seems that USPL doesn't work without activesync.
i've also tried flashing with SD card, but after a brief "Checking SD card content" message the phone goes back to bootloader.
Someone helpppp pls.
are u sure your sd card is correctly configured, according to the wiki entry- especially part "if above fails" ...?
if all steps fail, assumed you performed them correctly, you might try taking out battery and leave the device fully without power overnight...and restart it the next morning
I've used a 512MB SD card - formatted it- and copied the OS file as ARTEIMG.nbh - put the sd card in the phone and started the phone in bootloader mode.
I think there is nothing more to do.
I can enter the bootloader, connect the phone to PC in USB mode. So, I hope that my phone is not bricked.
But how to revive it?
if you are in bootloader, i dont see why you shouldnt be able to flash!!!
try another sd-card, use another xp computer, exchange the usb cable...
yust to be certain: have you left out battery over-night?
...and what are the details stated on boot-loader screen (numbers)?
oh, and I get the feeling you are not working exactly as told:
in your PC right-click on Computer, then select Manage
Select Disk Manager and then delete existing partition
create a new partition with max size 256MB
format this partition in FAT32
thormdac said:
(i)...and what are the details stated on boot-loader screen (numbers)?
(ii) oh, and I get the feeling you are not working exactly as told:
in your PC right-click on Computer, then select Manage
Select Disk Manager and then delete existing partition
create a new partition with max size 256MB
format this partition in FAT32
Click to expand...
Click to collapse
(i) See post no 5 for the details
(ii) You can not do this with a removable disk (SD card inserted through a card reader). Only works when you can get WM5Storage to work.
archat68 said:
(ii) You can not do this with a removable disk (SD card inserted through a card reader). Only works when you can get WM5Storage to work.
Click to expand...
Click to collapse
...i dont have my micro-sd-card-adapter at hand atm., but there sure will be possibilities formatting your sd card accordingly...try administrative tools/computermanagement/storage/diskmanagement under xp, boot your pc with a diskpartitioner like acronis disk director...
i can only advise you to keep trying...but as long as you can not say for sure sd-card-flashing is working correctly, i wouldnt give up...
and as far as flshing bootloader via usb/activesync goes, i can only say i once screwed my device due to insufficiant battery power during sd-card-flashing and thought it was bricked just at the point you are stuck now!!! - totally resetting it with the power-oiut-method, i.e. battery out overnight, revived it!!!
than agin i sure as hell did everything the way it was ment o be done...and nothing worked until i switched to another pc/ usb-cable!!!
so, to sum it up, DONT GIVE UP!!! bootloader is showing...so there must be a way to get this to work...
greetz
archat68 said:
I tried flashing the device with factory shipped ROM. but i'm getting Error 294-invalid vendor id message.
please suggest what to do?
Click to expand...
Click to collapse
Somebody please help me to revive my phone.
how can we help you, if you dont provide us any results of the steps suggested to you...ideally in a way so we can see what you actually did or didnt do, precisely as told ?!?
greetz
I really need some help!
I was following the the post The DEFINITIVE MTTY Thread!! REVISED 02-11-09 and I made a mistake as follows;
blanktruth said:
Ok, first of all I did not think that it was this dangerous to use MTTY!.
I followed everything and came to these lines
---------------------
Cmd>task 8
Cmd>
---------------------
But after Cmd>task 8 my device restarted immediately before the second line Cmd> appears and I panicked and disconnected my device and pushed the wrong buttons while "Touch Diamond" logo was on the screen.
Now, nothing happens. I can not start from the beginning because I can not start the bootloader by pushing Vol Down and the small red reset button...
Is there anything else left for me to try? Or should I throw my HTC to garbage?
Click to expand...
Click to collapse
Now, I do not know how, but I brought my HTC to bootloader mode and now I can see it via MTTY. But I mistakenly formatted the Internal Storage while I was trying to bring my HTC to bootloader.
Is there any way to upload the DIAMIMG.nbh file to Internal Storage? Or should I follow a different way to save my HTC Diamond?
i have the same probnlem!! with my diam300
my bootloader show not Diam300 64m but only 64M on the first position in 3color mode... plz help
Connect the Diamond and run the customruu.exe from your desktop, this should work.
how to connect if i used mtty... its clear everything what i have on device storage and in bootloader canot start stock or developed rom...
if i want start hard spl its say invalid model it....
blanktruth said:
I really need some help!
I was following the the post The DEFINITIVE MTTY Thread!! REVISED 02-11-09 and I made a mistake as follows;
Now, I do not know how, but I brought my HTC to bootloader mode and now I can see it via MTTY. But I mistakenly formatted the Internal Storage while I was trying to bring my HTC to bootloader.
Is there any way to upload the DIAMIMG.nbh file to Internal Storage? Or should I follow a different way to save my HTC Diamond?
Click to expand...
Click to collapse
The only thing to do now is to flash back a stock ROM or use a custom ROM with the RUU.
Solved!...
Dom1n8tr1x said:
First of, your device is supposed to soft-reset after the "task 8" command and you should have been holding down the "Volume Down" and "Back Buttons" to begin flashing your new ROM. The whole idea of using MTTY is to format your Main Storage and flash a new ROM. Therefor you should have loaded the ROM that you wanted to flash onto your Internal Storage.
Click to expand...
Click to collapse
Thank you for your reply.
Actually I had uploaded the ROM to my internal storage, but during trying to bring my phone to bootloader mode, I formatted the internal storage...
Anyway, what I did now is, first I opened the USB Connection feature from ActiveSync, and then used CustomRUU.exe to Flash the ROM...
Everything is solved now...
Thank you very much all...
ilijan said:
how to connect if i used mtty... its clear everything what i have on device storage and in bootloader canot start stock or developed rom...
if i want start hard spl its say invalid model it....[/QUOT
bootloader is all you need to revive the phone
connect it to usb in bootloader mode and just install an oficial diamond rom from an windows xp pc.
it's easy
Click to expand...
Click to collapse
plz write here step by step guide how you solved
How it was solved...
ilijan said:
plz write here step by step guide how you solved
Click to expand...
Click to collapse
Actually the most crucial part was to bringing phone to boot loader mode. And I think I managed that by pushing the Volume Down and Back (the arrow pointing left) buttons immediately after restarting my phone. And I had to do this after taking out the battery and putting it back after 5 sec.
When I pushed these buttons at the start up the phone tried to install the ROM from my internal storage, but as I explained I had deleted it by mistake. Therefore it could not find the ROM. I disconnected my phone from my PC and the screen started to say something like Retrying USB connection or waiting for USB connection, something like that.
I restarted my PC in Digitally Signed feature disabled by pressing F8 during start-up. Reconnected my phone to PC (the screen of the phone was still blinking as waiting or retrying usb connection). And voila the phone screen changed to boot loader mode...
The rest was easy. I opened the USB connection feature from ActiveSync and used CustomRUU.exe with a ROM to flash my phone...
That is all...
1. plug phone in to computer in bootloader
2. run customruu or stock from rom update on computer
3. wait for rom to flash to device
4.???
5.profit
but my booloader dont show model ID: DIAM300 64M what i had befor
and show me only: 64M
and any flash error with invalid model id, i canot flash, rom, stock rom, or hardspl...
understand me.. im not totaly noob... i used mtty X times... but now have this probles
can somebody help me?
my diamond dont have model id...
before i had in bootloader mode DIAM300 64M model id, but now i havent got... its show only 64M,
every rom flash stopped at 1% cose model id error,
every hard spl falsh finished 100% but after flash when device restart write model id error...
i cant do anithing... can somebody help me?
For everyone facing problems after flashing his/her device, take a look at the link in my sig.
There you can find a guide to restore your diamond.
you dont understand me..
i canto flash any rom any hard spl becous my diamond dont have device ID...
in bootloader dont show DIAM300 64M but only 64M
after all flash say error mobile ID...
i try mtty, hard reseted, soft... and nothing
after start its show me only first stock screan, the red text on the right bottom sight dont start: 1.17.25.14
2.100000
geny d2x
its maybe wrong but i forgot what waz here...
how can change device model ID? form 64M back to my stock DIAM300 64M?
Try another version of Hard-SPL, some people report that 1.40 not fully works.
I suggest you try 1.94 Olinex.
my diamond is death... if somebody know how can heal it... plz write me...
my device ID is missing... so i cant flash any rom, any hard spl, any radio...
try this? http://forum.xda-developers.com/showthread.php?t=409425&highlight=invalid+model+id
im not sure but i dont think one can brick his/her phone after hard spl, thats the reason of hard spl in the first place that u dont brick it. boot loader is always present
Guide
if you are using Windows XP try the following steps:
Connect your device to your PC
In Active Sync > connection settings > check Allow USB connections (which you have un-checked while doing MTTY)
Find a ROM with CustomRUU.exe / diamond wrapper
Now enter into bootloader mode(forget about the device ID)
Go to customRUU.exe and run it
Follow the ROM installation steps
This will help you installing your new ROM.
I had a similar problem and i resolved it by follwoing the above steps.
Guide
if you are using Windows XP try the following steps:
Connect your device to your PCIn Active Sync > connection settings > check
Allow USB connections (which you have un-checked while doing MTTY)
Find a ROM with CustomRUU.exe / diamond wrapper
Now enter into bootloader mode(forget about the device ID)
Go to customRUU.exe and run it
Follow the ROM installation steps
This will help you installing your new ROM.
I had a similar problem and i resolved it by follwoing the above steps.