hi
i got ASUS P527 from customer ,the problem is when power on it hangs on logo and after few seconds white screen ,customer told me that the problem occur when he updated it with micro sd ,and when i press ok and reset button it displays IPL insert usb cable ,and when i connect it through ACTIVESYNC it is not getting connected
help needed
no suggestions any how i manage to revive the phone
Related
I had those 2 HTC diamond to unlock... I tried solution posted in this forum: with first phone all went wright and I manage to unlock it after some trys on step 3... the second phone crash on step 2.. now it does'nt turn ON, and can't enter BOOT MODE (tricolor mode), and battery is ok!
Please help me recover this phone!
Same problem. Diamond totaly dead during flashing. Any chance to turn on for reflashing? Nothing like hard reset or removing batery working.
same thing here!
any solution to repair dead diamond !!?
any news to repair this phone
Sorry guys, On a lighter note, if anyone who has a dead US Diamond wants to sell their housing, especially the back cover please let me know.
do it..........
ok first there is not dead diamond put your battery in phone and connect with pc download rom update or flasher or some hard spl fixers and instal it on your device
because when is there tricolor at the bottom of the screen when device is not conected there is word SERIAL, and if you connect there is word USB so do not crash your self just be patient.........
how to solve pb diamond can't be enter in boot mode even reconised by pc
after unlock using cdma unlocker
any news on this?? My diamond it dead as well and need it for work. Please help some one must know what to do. I can't even connect to my pc
Contact this man by Skype- elco_nsdongle. He repairs dead Omnias. If you'll find diamond shematics I think he'll be able to help you.
Any solution about dead diamond? ?
Hi I was try to to flash some cooked ROM and my Diamond tells that is incorect Image. Then restart and start to bootloader. So i try to send another Rom but after restart its freeze on "HTC Diamond" screen. Ill try Hard reset many times with no result.
After thay I tryed to turn Diamond Off (Remove battery and put it back). In turned off Diamond I press and hold volume down + press and hold reset and turn the Diamond on. This it bring him to Bootloader.
Try it if it works for you.
Im sorry for my bad English.
whoever needs to fix dead diamond, you can PM me for help
but I can only help if the device can still boot to bootloader (tricolour screen).
by unlock...did you mean security unlocker?
htc diamond usb data tranfer is not working
how can recover 4 gb data in htc diamond internal memory
usb data transfer is not working b"coz by mistake cable is broken and data tranfer is working stop
any one help me,
bluetooth tranfer is working but it's very slowly
heloo
I am currently upgrading my XDAIIs from WM2003 to WM6.5.
after checking the system from my XDAIIs, suddenly the power led went off and the sync is disconnected so I cannot continue the upgrade. On my phone screen there are only gray screen with USB at the top and V.2.07 at the bottom.
I have tried to restart the upgrading process but the problem is now my phone cannot connected to my laptop although I am using USB. I also tried to change the usb port and sync with other computer, but the problem is still the same.
FYI : at the beginning of the upgrade process, I didn't hard reset the phone. Is this the cause of the problem??
Please help me, does anyone have any solutions?
your device is in bootloader mode and it should show up as a ms_wm_device in
windows and you should be able to flash it again you can read more here
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
chanxda... you sorted it yet! I had same problem last nite and figured it out. Ill watch thread if you need reply!
Hi Eveyone
Help needed please.
I came by an XDA Orbit that refuses to work. The symptoms are as follows:
1. When power button is pressed to turn it on the 02 Splash screen comes on for about 3 seconds then some red writing flashes up on the top left of the screen. The phone then turns off. No matter what I do it always does this. Once I have been through this sequence once it won't turn on at all. The only way I can get it to work is to take the battery out for about 30 seconds and re-insert but it never gets passed the splash screen.
2. I can get it to go in to the boot loader mode (multi coloured screen) and if connected to my PC will show USB in the bottom right hand corner of the screen. However Activesync will not recognise it and I therefore can't upgrade the ROM to try and fix it.
3. I have tried to flash the rom from SDHC card but nothing happens
Anybody got any ideas or is it screwed?
Thanks for your help
just read the last line here
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Bricked XDA Orbit
So if you can't flash from a SDHC card how are you supposed to do it?
Is there any other way I can flash the XDA orbit or get it tom connect to my computer so I can flash it
Any help would be much appreciated
Thanks
you can flash it with sd
sdhc means sd high capacity and they are about 8,16gb
there are MILLIONS of threads about bricked devices,and at least a third of them is answered...please read before posting
Hi all u guys out there hope someone can help me i installed this rom on my diamond the name was TEAL or some like that the first few times it was fine but then my battery was running low and then when i turned my diamond on again i had 2 setup mobile and now it just keep showing the screen that says it wanna setup and i cant acess USB from there so plz if u can help me recover my diamond plz reply
try update from Boot Screen
Blackster..try updatin frm boot screen..go in boot screen & then connect it to usb & try updatin the ROM...
to get in your bootscreen just reset your device while holding the volume down button
just so you know ^^
Tried every thing
,My vista wont show the usb from hardSPL and i cant connect from the setup and when i just installed the rom again it wont work
nothings work plz help
USB??
its just installing the usb driver but show no usb
simple thing
just run RUU from u'r PC...
Follow 1st Two steps by clicking next...
no need to perform mentioned task in RUU.
Connect USB Cable PC to Diamond...
On diamond hold on off button and volume down button and hit reset button on back..
you will forwarded to boot screen on diamond...
It will automaticly identify u'r USB connection to PC...
Once it displays USB on diamond boot menu, Hit Update button on RUU running on PC...
Then follow the RUU instructions...
Once finished, you have done...
Hi every one,
i have a serious problem with my HTC I-MATE JASJAR what's blocked in white screen (Serial / USB) and i cannot do anything on it, no boot, no reset soft, no reset Hard, no upgrade.
The issue is related to:
I tried to upgrade Radio ROM from 1.09.00 to 1.12 and i'm using Windows 7 Pro and when starting Flash, my PC shutdown because an electrical issue and since that, i cannot boot my device, i cannot flash or reset, my device is hung on white screen with Serial when no USB cable bluged in the PC and USB when Cable is pluged.
I Tried many times to boot it but no response, it's still hung and nothing can move on it.
I Just have one detail: when i plug the USB cable in my PC, the device is reconised but when starting upgrade or flash, i have error 101, no connexion.
Plz someone help me :crying::crying::crying::crying::crying::crying: