Develop Bugs

Screen shuts off when slid up!

So... all of a sudden, everytime i slide the screen up, it shuts the screen off. I slide it back, hit the power button a few times, then it turns back on?
NRG GTX 5/9 release
TMO USA
Is my screen busted?

Power off your phone, remove the battery and then put it back in, making sure it fits in there snuggly.
That has happened to me, and removing/replacing the battery fixed it.

Yes, as Amy noted this behavior is often attributed to the battery not sitting exactly right in the compartment. Sometimes just popping it out and back in is enough, but some people have reported needeing to slip a small piece of paper or something similar under the battery cover as well to help keep it snug. (It seems that the sliding motion can be enough to shake the battery off the contacts if it's not secure enough).
Let us know if that clears it up

okay. what the deuce.
my tp2 just literally started doing the same.
earlier today it was perfectly fine.
but now.
i slide out the keyboard and the screen goes blank.
i tried the remove battery and restart.
didn't help.
i tried the paper between battery and cover.
didn't help either.
the screen only goes blank when completely slid out.
if i hold it open just before completely open the screen is still on.
any suggestions?
thanks.

Yea, none of those things worked. However, keeping the battery snug helped with the issue of not hearing anything through the handset.

It honestly sounds to me like both of you are dealing with a loose connection between the screen and the motherboard somewhere, either power or video feed, can't say for sure which. Unless you're willing to disassemble your rhodium (which isn't impossible, just complex), it sounds like it's time to send it to a service center (for AT&T) or to HTC, since that would be a warranty repair.
I hope that this is just freak coincidence that both of you had this happen just now, and not a sign that we're all at risk of having the same issue eventually
How long have each of you had your phones?
EDIT: One more question for you guys...whatever is on the display on your screen rotates into landscape before the display shuts off right?

sirphunkee said:
It honestly sounds to me like both of you are dealing with a loose connection between the screen and the motherboard somewhere, either power or video feed, can't say for sure which. Unless you're willing to disassemble your rhodium (which isn't impossible, just complex), it sounds like it's time to send it to a service center (for AT&T) or to HTC, since that would be a warranty repair.
I hope that this is just freak coincidence that both of you had this happen just now, and not a sign that we're all at risk of having the same issue eventually
How long have each of you had your phones?
EDIT: One more question for you guys...whatever is on the display on your screen rotates into landscape before the display shuts off right?
Click to expand...
Click to collapse
i have own the phone for about three weeks...
though. bought it used from a friend who had it for four months.
but my friend bought it used from somebody too...
aka. not sure how long it has been used.
the display is rotated. and stays on as long as the right side is held.
before the 'tilt piece' is revealed. as soon as it is. the screen goes blank.
and i believe it would be the video feed...
i can still type with the keyboard. just can't see what i am typing.
unless i hold the screen from sliding completely out on the right.
and about the warranty...
would i have a warranty with htc still?
don't have proof of purchase.
just the phone and original box.
thanks.

My AT&T Tilt 2 has been exhibiting this behavior for some weeks now. It seems to be centered around the keyboard slide, but the behavior comes and goes. I found that slamming the phone on the desktop would bring it back to life for a little while, but then it would start to clap out again in a few days. What a pile.
Anyway, I have a fresh one from AT&T to swap out. Now all I have to do is get all my applications and stuff transferred over to the new phone before sending the craprod back to them.

sh4d0w86 said:
i have own the phone for about three weeks...
though. bought it used from a friend who had it for four months.
but my friend bought it used from somebody too...
aka. not sure how long it has been used.
and about the warranty...
would i have a warranty with htc still?
don't have proof of purchase.
just the phone and original box.
thanks.
Click to expand...
Click to collapse
Oh boy...yeah I didn't realize you'd gotten it third-hand. Well it has been less than a year since the Rhodium was released, so it's possible that HTC will still honor the 1-year manufacturer's warranty, but I can't guarantee it. My suggestion would be to just contact HTC America's service group (1-888-617-1113) and see what they say.
Best case: they agree to cover the repair
Worst case: an example of one of the risks you take when you buy something through "unofficial" channels

Yea luckily for me, I bought it second hand, but it was purchased from a retail store, meaning I got a warranty exchange. I just sent it back.

having same issue
im having same issue, when the phone is slid open, goes black, nothing gets it back on, the buttons light up, display dead
however, if i place it in stand by via power button in regular mode, then slide it open, it works, ive rattled and shook the phone, never goes back off, im typing this with it open and tilted....
any ideas?
prob leaving the htc community, samsung captivate, blackberry torch, or htc aria are my choices from at

Screen died?

Last night I was out and during the night I pulled my desire z out of my pocket to find that the screen was dead, the soft touch buttons were still lit up and working but no display. I pulled the battery and tried to reboot and no luck, you can hear it booting and even unlock/receive calls and txts etc once it has booted up just the screen stays blank the whole time so have to do everything on feel.
Essentially does this just mean my screen has a hardware fault? is it worth trying to fix? I assume the only option would be to purchase a replacement screen and dissemble and reassemble it?
(warranty is not worth it as I live in New Zealand and would have to send my phone back to the UK where I bought it from, also I have dropped it quite a few times so probably voided anyway...)
Thanks in advance for any input

Does it never display anything? So not even a flash during boot or something?
Because then it is probably a hardware problem.
Since the soft touch buttons do still work I think there might be a little crack or something in the flat cable that connects the bottom half with the top.
Maybe you could check whether you can see if the cable is broken or not?
The best thing to do then is to look for a replacement and try to fix it yourself or bring it to a shop where they can do it for you.

No it never displays anything, completely dead the whole time. The touch input is still working though as I answered a phone call this morning on it by making the usual gesture just without being able to see anything. Doesnt seem to be anything wrong with the cable itself as far as I can see. Yea might have to get someone to have a look at it.

My phone is acting the same. I dropped my phone in the pond before, but pulled battery out on time and had it in rice for a day. My phone was still working for about two weeks after that incident. I dropped it and had one little crack at the top of the screen and about a week after that it died when I had a water balloon fight with the phone in my pocket. D;
Do any of you know if the replacement lcd screen/digitizer for the Desire Z would work for the G2?

I had the same thing happening to my G2 screen, only it was intermittently working for a little while, then just completely died and wouldn't work. It was doing this crazy flickering thing then the back light wouldn't go on at all. If I held the phone at a certain angle in the sun, I could see that the pixels were indeed working on the display, but there was no backlight to make them normally visible.
So I purchased a replacement screen from ebay and carefully followed the directions on a youtube video for a G2 take apart. Its not a hard task to take apart and get down to the screen itself. It was rather easy. After putting it back together the screen still didn't work! Sounds work, i can also receive calls etc. But the screen still doesn't work!
Is there any way that this could be a software issue?

Oh and PS, I believe the LCD replacement would work for both the desire Z and the G2. They are identical phones after all right? I'd say its a safe bet. The screen I bought was only 35 bucks. Didn't think that was a bad deal.

Another dead screen or something else?
Few days ago my phone fell of the couch onto a rug - no big deal, so far it has survived much worse, but when I picked it up, the colors were all messed up - overly green and red. Tried restarting - no luck. Everything worked fine, except the colors, but then the screen turned of completely. I could hear notifications, phonecalls, but the screen was dead. After some tapping on the screen, it turned on again - with ****ed up colors. Then started flickering and was gone again. Few more times I could turn it on by tapping before it was dead for good.
Figured, after all these drops it survived, maybe the screen connector is a bit loose. I mean, I could sometime get a contact when tapping it, so I dissasambled it completely, secured all the connection, put it all back tougether and fired up - same thing: dead screen, phone working.
Has anyone had such problem before? Is it screen that is dead, or connector or... I have no clue... I would like try to fix it on my own, with some replacement parts I could get on ebay - but, what gave?

Black Screen, phone still works?

Hello XDA members, this time I'm writing to all of you to tell you something that happened to my Optimus G E987 from Claro Argentina, also, to ask you something related to the topic.
I bought this phone about 4-5 months ago, and I have taken really good care of it, without using any film protection or case, it was working perfect and with not a single scratch on it, not even a little hit.
But then, some days ago, I decided to "protect it" a little bit, so I got one of this:
htt-p://i[dot]imgur[dot]com/YtgK1aS[dot]jpg
htt-p://i[dot]imgur.com/la1kI5e[dot]jpg
(Sorry, I'm new to this forum so it won't let me post links)
I used it like.. dunno, 3-4 days. One night, my phone was on 53% battery, to lazy to charge it so I just let it like that. Next day I gave it some use, so it dropped to 33% of battery life, I had to go work so I turned it off. When I finished, I tried to turn it on again, but nothing happened, tried more times and nothing, then I noticed I liiiitle light in the screen, the phone was turned on, but with REALLY low visibility, almost everything black but with a little of sight.
I though it was just a battery problem, so I charged it, but to my surprise, nothing happened, well something did happen, the little bit of sight that I had just went full black with no visibility. I noticed that the touch screen and buttons actually worked, I could "easily" navigate through the phone by just using it as normal, but without seeing (you can do this by just knowing your phone a bit).
And that's the story, basically, after using that case, the phone "casually" stopped working properly, all I got was a functionally phone with a black screen.
I managed to connect it to my pc through wifi and launched Android Screen Cast, to see what was happening on my phone. The glow was at 100% (I tried changing it) and everything seemed normal.
If you don't want to read, here is a TL;DR
>Bought Magnetic* Flip Stand Leather Wallet Case for Optimus G
>Some days after, phone screen stopped working (phone was still normally working, just with a full black screen)
About the Magnetic thing.. is there any possibility that this was the problem? the magnetic thing?
Btw, I sent the phone to tech service because it was still on warranty and they have me a new one, now I'm scared of putting it again in the leather case I bought, I don't want this to happen again.
Something to comment? hope you can give me some advice, thanks in advance!

Also having similar problems as you. Somehow, i am quite sure its the stock rom causing the problem.

Had the very same issue few weeks ago, had to send the phone back to LG ( who replaced the motherboard :/).
I was also on stock rom, had root and unlock bootloader (of course I clean all that **** before sending it back).
For my part, I was unable to go to recovery and download mode was quit impossible to access (may be my finger fault )
BUT! some time if I let the phone off for a moment or spam the power key, the backlight turn back on until I power down the phone, so it's could be a software issue ...
Anyway, an other info, when the backlight was off, if i tried to change backlight level i was getting a error message about overeating or something like that...

Screen Issues

Recently I returned my Razer because the vibration in my phone sounded horrible. Over two weeks later I got a replacement phone back and the vibration ended up sounding even worse than the first so I just assumed they're all this crappy. Then one day later after setting up my second Razer phone this happened.
The screen went black and clicking the power would vibrate but the screen wouldn't come on until eventually, it appeared as you can see in my screenshots. I managed to factory reset it and even after it still appears cut in half until finally, I was able to power it off again and restart, which after it seemed fine for a bit before the entire scenario replayed itself. Has anyone else experienced anything like this?

Obviously abnormal behavior. I'd try another rma

Can confirm that mine does a similar thing. Every now and again left half of the screen would freeze. It happens for a few seconds and comes back normally. I saw it first about a week ago, but thought it had to do with a specific app. Since then I had it happening in other apps and home screen.

Can't say I've seen this, and that's from 3 phones. Have yet to update to the new firmware yet though.

I have seen that with some company's laptops before and generally its had to be put down as Dead on Arrival as usually caused by some physical damage to the screen. With phones I cant say I have ever seen it happen on a small screen but certainly get it sent back as from 10 years in repairs I wouldn't see a software fix for that type of screen issue.

UPDATE
Mine went from having left side glitch occasionally to the who screen turning back every now an then. Left side is mostly frozen. On the bright side, I found that if you apply some light pressure to the middle of the bottom grill you can get the screen back pretty reliably. Judging by disassembly video it is where screen cable is bent to go under screen assembly, so it is probably result of some stress/tearing of that cable. Would explain partial malfunction as opposed to complete failure, but I can obviously be wrong.
Also, RMA was granted without a problem after we tried a factory reset with the tech.

RMA would be the best bet. I am surprised by the defective stories popping up, but at the same time I don't think I've even counted 100 people that have had a defect requiring an rma. And we know they sold at least 1,337 of the phones, so that's still a decent failure rate.. Though I think they need to revisit it and get that number lower.

yeah without question send it back to the store as dead on arrival or rma the phone - sooner its sent back the better with laptop screens doing this 9/10 times was the screen was broke and mainly a loose cable or dropped by the user. 1st 30 days or so the retailers and laptop manufacture could replace them but the longer it took to report it the more inclined to treat it as damage and not cover it under warranty.
Yes im comparing a phone screen to a laptop and normally a loose or damaged cable would show signs of this, Could be temperature related as well.

It was pretty much dead on arrival it's just annoying to have to go through another RMA and the whole 2-3 weeks before getting another replacement.
Also whoever mentioned squeezing the bottom speaker is correct that temporarily fixes the issue.

My Razer phone screen has failed
I've owned the Razer phone for less than two months. Yesterday, I went to wake the screen from sleep (press power button). The phone displayed random black and white bars pulsing across the entire screen. I was unable to interact with the phone while it was in this state. I restarted the phone by holding the power button and volume up at the same time. The phone restarted but the screen remained black ; the screen did not light up at all. The phone was in fact powered on and eventually the android "tic...tic...tic" sound played during device boot, when awaiting user input (android tic sounds played while awaiting password input during startup). While the speakers worked the the power led located in the bezel still lit, the screen remained OFF/dark. While continuing to hold the phone and move it around the screen finally lit. The left side of the screen appears "stuck" (does not refresh). Whatever was displayed on the screen when this condition occurs remains frozen on the left side of the phone. It's a perfect 50/50 split. In other words, the left 50% of the screen (portrait orientation) has a complete image "stuck" on the screen from whatever was displayed when the screen last froze (eventually it releases and then immediately freezes again). The frozen left side of the screen eventually updates as you continue to interact with the phone (this is NOT anything like burn-in). It's lit nice and bright but the left side of the screen appears to freeze and will not refresh while you interact with the device. The right side of the screen continues to update normally. I was able to capture a screenshot (power button + volume down) and confirmed the image captured does NOT reflect the display issue. This appears to be a hardware failure. Other Razer phone owners are reporting it and a video has been posted to YT demonstrating the "Razer phone screen problem?". Razer has offered an RMA however they DON'T afford advance RMA (you must ship your device to them, they receive it, then eventually ship a replacement). That's unacceptable for a $700 phone that took over a week to arrive because they shipped it from HK and got stuck in customs. Buyers beware, I would avoid this phone for now until the cause of this issue is identified OR Razer strengthens their replacement processes..
update/more info: I was able to complete a factory reset and the issue persists.
also, as another user stated above, pressing lightly and applying pressure around the edges or to the screen does appear to cause the screen to light back up again when it's dark (in other words the screen goes to black and will not wake. then when you apply some light pressure around the device it reliably lights the screen again; until the next failure which is moments later)

Hi my razer did up date swiched off and has never come back on dont even show charging has eny one els had this

I've got my Razer phone on the 20th of December 2017. Used it a couple of months before noticing the entire top part of the screen having dead zone. Rendering my phone to be unable to tap on anything on the dead zone. I've proceeded to exchange emails with Razer and got it RMA-ed on the 20th of March 2018. To my surprise. My 2nd set is experiencing the same exact issue right now in less than a month of using it. Are there anyone else out there experiencing this issue?

Got my razer phone on the 20th December, last month while using Google maps the left side froze for a bit, fixed it at the time with a reboot, didn't do it again till last week and now does it all the time. I'm waiting for an RMA guy from razer to email me back, and I've put a post on Reddit under the /r/razerphone sub to keep everyone interested how my RMA process is going to go. How long does it take to get your fixed/replacement phone back to you? If I dropped the phone and broke the screen, my insurance company would replace it and get it back to me within 5 days for £25 fee. I bet razer are gonna take weeks.... ?

razer screen problem
since i got the phone at the start the screen was flashing black then an hour later phone was all gucci,now if i press the side of the speaker like a small bit harder the whole screen goes black untill i manage to restart the phone, now at all i dunno whats happening nothing happens all i does it vibrates when i try to unlock the phone theres no sound anymore when the phone gets unlocked so im guessing i cant restart it anymore cause it dosent unlock :/
if you need any pictures / videos
Dm me on IG: Pekiuks_YT
discord : Pekiuks#7734
ok thanks , i should refund it or no because i need to factory reset it but i cant see anything cause the screen is black .

Anatoli
ZaccTeo said:
I've got my Razer phone on the 20th of December 2017. Used it a couple of months before noticing the entire top part of the screen having dead zone. Rendering my phone to be unable to tap on anything on the dead zone. I've proceeded to exchange emails with Razer and got it RMA-ed on the 20th of March 2018. To my surprise. My 2nd set is experiencing the same exact issue right now in less than a month of using it. Are there anyone else out there experiencing this issue?
Click to expand...
Click to collapse
Bought Razer in March. And now have same problem !

Part of Note 10+ Screen Goes Black

This problem just started today, I've done nothing with settings, have not installed any apps recently, did not drop it, expose it to water, or anything that could possibly cause damage. What's happening is that basically about 1 inch-1 inch 1/8 of the bottom of the screen turns black, and at almost random, sometimes it could go a minute and half or so, sometimes 30 seconds, sometimes within 5 or less seconds. The strangest part? The part that goes black still operates fine to touch, so if an icon or letter of the keyboard, or whatever, is located in that area, it can still be selected/operates. Taking a screenshot to try to show it is worthless since it'll show the screen as just fine, so I attached a picture and a video of the problem from an old phone of mine. The blacked out are will go right back to normal if you turn the screen off, wait a second, and turn it back on. Also, if the blacked out area is there, it'll go away after about a half a second when the screen dims right before the screen inactivity turns the screen off. I've only had this phone for a couple months, I got it back on December 7th 2019.

I learned something else. If I manually lower the brightness to a particularly low level, the black goes away, so it seems to in some strange way be related to the phones brightness level (I use auto brightness), this also might explain why the black comes at differing intervals, as my brightness is adjusting constantly to my surroundings, the time before it comes is either shortened or lengthend based on the brightness.

It doesn't seem that strange that the touch still works in that area as the digitiser and the display are two different things. I would factory reset (because Samsung will make you do this anyway) and if still an issue, take it directly to Samsung, that does not look good.

willhemmens said:
It doesn't seem that strange that the touch still works in that area as the digitiser and the display are two different things. I would factory reset (because Samsung will make you do this anyway) and if still an issue, take it directly to Samsung, that does not look good.
Click to expand...
Click to collapse
I was just thinking I might have to do factory reset, if that doesn't work, and it needs repair/replacement, do I go to an authorized Samsung repair place (I know I have one within about a couple miles of my house), it's
obviously well within warranty, or take it to At&t store as I do have that AT&T Protect Advantage coverage for my phone?

willhemmens said:
It doesn't seem that strange that the touch still works in that area as the digitiser and the display are two different things. I would factory reset (because Samsung will make you do this anyway) and if still an issue, take it directly to Samsung, that does not look good.
Click to expand...
Click to collapse
Did the factory reset, turned out to be a waste of time. That black bar was showing immediately, right at the setup screen. So I guess it's safe to say that it's a hardware issue, defective whatever. Funny story is that when I bought this phone, my att store only had two of them left, one was immediately defective, it wouldnt get past the main logo screen, and now I got this one and it became defective within just a couple months, got to love it.

willhemmens said:
It doesn't seem that strange that the touch still works in that area as the digitiser and the display are two different things. I would factory reset (because Samsung will make you do this anyway) and if still an issue, take it directly to Samsung, that does not look good.
Click to expand...
Click to collapse
Just left AT&T store where I initially purchased the phone. They're shipping out a brand new note 10+ to me today and I'll get it tomorrow ?

Glad to hear! That definitely sounded like faulty hardware. Funny you saw two failures, I guess it will happen with such complex devices.

Note 10 plus screen goes black
Hi i thought i was crazy until i saw your thread. The same thing is happening to me but it does not go continuously so id see two red squares first theyre really small and they appear anywhere on the screen then if try to screenshot them they show upblack in the screenshots instead of red . I just need to know if anyone found a solution yet because my phone came with the warranty booklet but it wasnt filled out.

Tech girl99 said:
Hi i thought i was crazy until i saw your thread. The same thing is happening to me but it does not go continuously so id see two red squares first theyre really small and they appear anywhere on the screen then if try to screenshot them they show upblack in the screenshots instead of red . I just need to know if anyone found a solution yet because my phone came with the warranty booklet but it wasnt filled out.
Click to expand...
Click to collapse
You just need the proof of purchase, or, if you got it on contract, the contract itself will suffice