This problem just started today, I've done nothing with settings, have not installed any apps recently, did not drop it, expose it to water, or anything that could possibly cause damage. What's happening is that basically about 1 inch-1 inch 1/8 of the bottom of the screen turns black, and at almost random, sometimes it could go a minute and half or so, sometimes 30 seconds, sometimes within 5 or less seconds. The strangest part? The part that goes black still operates fine to touch, so if an icon or letter of the keyboard, or whatever, is located in that area, it can still be selected/operates. Taking a screenshot to try to show it is worthless since it'll show the screen as just fine, so I attached a picture and a video of the problem from an old phone of mine. The blacked out are will go right back to normal if you turn the screen off, wait a second, and turn it back on. Also, if the blacked out area is there, it'll go away after about a half a second when the screen dims right before the screen inactivity turns the screen off. I've only had this phone for a couple months, I got it back on December 7th 2019.
I learned something else. If I manually lower the brightness to a particularly low level, the black goes away, so it seems to in some strange way be related to the phones brightness level (I use auto brightness), this also might explain why the black comes at differing intervals, as my brightness is adjusting constantly to my surroundings, the time before it comes is either shortened or lengthend based on the brightness.
It doesn't seem that strange that the touch still works in that area as the digitiser and the display are two different things. I would factory reset (because Samsung will make you do this anyway) and if still an issue, take it directly to Samsung, that does not look good.
willhemmens said:
It doesn't seem that strange that the touch still works in that area as the digitiser and the display are two different things. I would factory reset (because Samsung will make you do this anyway) and if still an issue, take it directly to Samsung, that does not look good.
Click to expand...
Click to collapse
I was just thinking I might have to do factory reset, if that doesn't work, and it needs repair/replacement, do I go to an authorized Samsung repair place (I know I have one within about a couple miles of my house), it's
obviously well within warranty, or take it to At&t store as I do have that AT&T Protect Advantage coverage for my phone?
willhemmens said:
It doesn't seem that strange that the touch still works in that area as the digitiser and the display are two different things. I would factory reset (because Samsung will make you do this anyway) and if still an issue, take it directly to Samsung, that does not look good.
Click to expand...
Click to collapse
Did the factory reset, turned out to be a waste of time. That black bar was showing immediately, right at the setup screen. So I guess it's safe to say that it's a hardware issue, defective whatever. Funny story is that when I bought this phone, my att store only had two of them left, one was immediately defective, it wouldnt get past the main logo screen, and now I got this one and it became defective within just a couple months, got to love it.
willhemmens said:
It doesn't seem that strange that the touch still works in that area as the digitiser and the display are two different things. I would factory reset (because Samsung will make you do this anyway) and if still an issue, take it directly to Samsung, that does not look good.
Click to expand...
Click to collapse
Just left AT&T store where I initially purchased the phone. They're shipping out a brand new note 10+ to me today and I'll get it tomorrow ?
Glad to hear! That definitely sounded like faulty hardware. Funny you saw two failures, I guess it will happen with such complex devices.
Note 10 plus screen goes black
Hi i thought i was crazy until i saw your thread. The same thing is happening to me but it does not go continuously so id see two red squares first theyre really small and they appear anywhere on the screen then if try to screenshot them they show upblack in the screenshots instead of red . I just need to know if anyone found a solution yet because my phone came with the warranty booklet but it wasnt filled out.
Tech girl99 said:
Hi i thought i was crazy until i saw your thread. The same thing is happening to me but it does not go continuously so id see two red squares first theyre really small and they appear anywhere on the screen then if try to screenshot them they show upblack in the screenshots instead of red . I just need to know if anyone found a solution yet because my phone came with the warranty booklet but it wasnt filled out.
Click to expand...
Click to collapse
You just need the proof of purchase, or, if you got it on contract, the contract itself will suffice
Related
Hi to all,
A couple of days ago I noticed that when I answered a call the colors of the screen looked bad, and I didn't pay attention to it.
Now my screen has transparent horizontal lines which are pretty visible, kind of like interference you get in computer screens when you take a picture of them.
I would like to mention that I haven't dropped the phone even once.
I'm considering doing a factory resest in hopes that it will solve the problem, but I doubt that it is a software issue.
What do you guys think?
Please advise
Itay
Sounds like a broken screen to me. And definitely like a warrenty case. Restore stock f/w if you have flashed and return it.
Restore the original firmware (if you have flashed the phone) and call the samsung service for the assistance.
the thing is that now I don't see it at all.
It's as if it came and gone.
I disabled my task killer and juice defender, performed a complete titanium backup, in case I want to restore afterwards, and now everything is normal.
It does sound like a hardware issue, but do you think there's a chance it is software related?
I'm asking because I purchased it in europe, and I don't live there, so sending it for repair is something I would rather avoid.
Of course, if it is indeed 100% hardare issue, I have no choice.
That is why I'm asking, to be certain and to see if there are others who experienced this issue.
Your replies are much appreciated
update:
It appeared again -> Did a Factory Reset -> It's still there -> Sending for repair.
Must be a hardware issue.
Thank you for your replies.
I've actually always had slight screen issues with my Galaxy S also. The screen flickers slightly once in a while. I don't know if the radio is actually the cause but it's the kind of thing you might expect from radio interference.
Has anybody else noticed this?
Benjamin Dobell said:
Has anybody else noticed this?
Click to expand...
Click to collapse
Nope, never seen any flicker. My screen seems to have a defect of it's own though, but I'm not sure if it's worth the effort to send it in, because I imported mine from the UK while I live in South Africa.
When in the sun or under bright light I can see a two vertical lines near the sides and a horizontal line on dark/black colours and when the screen is off. As if those pixels have a grey/brown tint to them. The line is mostly one pixel thick but in places it is two pixels.
They are almost impossible to see unless under sunlight where they are clearly visible where the screen is black.
Does anyone else see this or know anything about it?
Edit: Apparently it's just the motherboard or something visible through the screen and they all have it, so I'm worrying about nothing...
That's interesting...
It used to come and go, but I think now it's here to stay.
It's really annoying and the screen, while usable, is really not a pleasant sight to look at.
I've attached some photos showing the problem.
With a normal screen I would say that it looks that way because that's what you see when you photograph a screen of an electronic device, but the sad thing is that what you see in the picture is exactly what I'm seeing now.
I did a factory reset, so it's in german now.
I heard some Droid X had a similar problem, but didn't know Galaxy S was having it as well.
In any event, can you confirm that after a factory reset, I no longer have root access?
Just making sure so that they don't give me problems with the warranty.
seem like the phone was dropped, and the screen got damaged
the connectors are lose
double posted again....
Really?
That's very weird...
The only time it was "dropped" was from half a meter , it didn't fall directly but partially sideways, it was with a case, and it landed on its back, not on the screen.
I wouldn't even call that a fall.
Unless, someone in my family dropped it without telling me...
Either way, I think there's no escape but to send it to repair.
If you think it's a problem with the connectors, would you try and give it to some local lab to try and fix it or send it to samsung for replacement?
I faced similar problem.
This problem only occurs when I use the phone in 2g mode.
there are occasions whereby the signal bar for 2g is full and when I place the phone near some conductive surfaces the lines becomes very obvious, to the point of irritating.
nit sure if anyone has such problems too
I have same problems with horizontal lines.
I never paid attention if i am on 2g or 3g when it happens. I will now.
Edit: rooted on jm5
-------------
It seems that my phone too has started to do the same thing since last night.
I have called Samsung and am waiting to hear from them now.
I hope this is a thing covered in the warranty.
I have reverted to the local ROM for India and have deleted everything on my device.
Yet it shows lines flickering like you can see on old computer monitors.
Its not as bad as the ones on the attachment above but it is starting to annoy me.
It usually happens when the screen is completely filled with a single color except black.
Eg. When you pull down the notification tray down.
Also I seem to notice that when the wifi is off, it stops.(I dunno maybe a placebo effect)
aditya_t90 ,
I have sent it to Samsung for repair, and they should tell me in the coming days exactly what the problem is and whether it can be fixed under warranty or not.
I will update as soon as I hear from them.
Until then, try to see if it changes when you hold the phone differently, for example if you grip it more firmly or hold it in another way.
itaykoren said:
aditya_t90 ,
I have sent it to Samsung for repair, and they should tell me in the coming days exactly what the problem is and whether it can be fixed under warranty or not.
I will update as soon as I hear from them.
Until then, try to see if it changes when you hold the phone differently, for example if you grip it more firmly or hold it in another way.
Click to expand...
Click to collapse
When did you send it in and when did they receive it(if you were not there when they got it).
Also how long has it been without your phone?
The samsung service center is shut in my area today.
I will go to them tomorrow and get this sorted out.
Its not like the phone was cheap or anything.
I actually sent it to my uncle in Germany because it was purchased there.
He went to the store where he bought it and the store owner immediately sent it to samsung and said that probably by this Tuesday or Wednesday (so tomorrow or in 2 days) he will get an answer from them and see what's going on.
aditya_90 ,
Just to let you know that Samsung are sending me a new phone to replace the damaged one.
I sent in my phone for repairs and they replaced the LCD module. The problem is now gone.
I suggest that you should do the same while the warranty still holds since it appears to be the LCD that failed somewhat.
So I got my Desire Z on Friday and have been LOVING it over the weekend. I got home from work today pressed the power button and the screen just faded into complete white (took about a second to go from off to faded totally to white). I took the battery out, put it back and turned the phone on. Exactly the same from boot. It seems to boot up the phone just with the screen not working. After a couple of minutes the leds flash as would be expected. Opening the keyboard clearly changes things, its clear the screen is trying to rotate. I phoned carphone warehouse and they told me to go to store with it.
Any ideas before I take it back tomorrow?
eviljonny said:
So I got my Desire Z on Friday and have been LOVING it over the weekend. I got home from work today pressed the power button and the screen just faded into complete white (took about a second to go from off to faded totally to white). I took the battery out, put it back and turned the phone on. Exactly the same from boot. It seems to boot up the phone just with the screen not working. After a couple of minutes the leds flash as would be expected. Opening the keyboard clearly changes things, its clear the screen is trying to rotate. I phoned carphone warehouse and they told me to go to store with it.
Any ideas before I take it back tomorrow?
Click to expand...
Click to collapse
Google "white screen of death" -- this can affect different phones from several manufacturers, it seems.
One victim said he took out the battery for 12 hours then got it to boot
Thanks, I had a google around, it doesn't quite look like what a lot of people describe, I had a Powerbook G4 on which the logic board died a while back, it looks exactly like that did once it stopped working.
Even so I've removed my battery and I'll leave it until lunch tomorrow before I pop it back in.
Well I took it into store, they replaced the phone without any issue, hurrah back to a working phone. Lost all my Angry Birds and OpenSudoku progress though, booo.
2 Weeks later and my display is dead again (this was a totally new unit, it wasn't repaired). I'm sure I'm not doing anything out of the ordinary with it. Going to lose my save games again
eviljonny said:
2 Weeks later and my display is dead again (this was a totally new unit, it wasn't repaired). I'm sure I'm not doing anything out of the ordinary with it. Going to lose my save games again
Click to expand...
Click to collapse
What the...
Something else to consider -- I once lost a phone due to a bad car charger -- it was a cheap one that didn't have proper circuit protection, apparently.
In my case it just killed the phone -- no white screen or anything. I just plugged it in, then it was dead.
I also killed the screen digitizer on another phone due to static electricity -- went down a slide with my son with the phone in the pocket -- touched a metal pole and ZAP.
arabic support for desire z
my desire z is operating on 2.3.3 . build number 2.42.405.4.
emails i receive in arabic are not connected.
pls advice how to correct for this.
tq.
I just bought my phone 4 days ago, and I'm having issues with the screen responsiveness. It just freezes up at times, sometimes it thinks one finger is touching it and does the whole zoom in/out thing when I touch it, randomly issues commands, touch buttons at the bottom don't respond, and only way it works for a lil again is to touch the power button to turn the screen off and back on. I have a link attached which shows the main problem area is when a lil pressure is put near the bottom, everything starts getting glitchy. It does this with all 3 ROMs I've used, which is another thing, I have to un root it so I can bring it to the sprint store. Since it's a brand new phone, and only 4 days old so far, do you think they will just replace it with another new model, or a refurb? I'd be extremely mad if it's a refurb since it's still in the 30 days. They also added TEP to my plan which I havent taken off yet. But since this is a hardware issue..
http://www.youtube.com/watch?v=I7-sNFfQhMY
The video doesn't even begin to show all the problems, but that's one I can replicate pretty well by holding it at the bottom.
Sometimes you get a bad phone HTC isn't perfect since you are within 30 sprint will switch it for a new one no charge.
Just go get a replacement
like others have said get a replacement simple and easy
CheesyNutz said:
like others have said get a replacement simple and easy
Click to expand...
Click to collapse
Eh, I'm on my third replacement, and gettng the last wasn't exactly "simple and easy ". Oh, and guess what needs to get replaced again due to another faulty display (interestingly this is the first phone I'm returning for the display... unless you count screen separation)?
Order a replacement, and when you get it, don't walk out of the store until you're sure the phone is working as it should.
Make sure they are not going to place an upgrade 20.00 fee on your bill.I had a bad screen as far as lifting up out of the frame from the bottom and light leaking out.When I went online a few days later to view my bill there was a upgrade fee and I had to call them but it was painless just had to give up about 5 minutes to get it done.
Just FYI
I'm really hoping when I go in tomorrow, they can return my phone and get a NEW one on the spot. I dont want them telling me they have to order it, etc, because I know they have a lot in stock. Do I just tell them I want a replacement because my screen is messing up when touching the rim of the screen? I really hope I dont get hassled. The phone is back to stock, S-ON, fully unrooted.
This video shows the issue even more. It's so bad today, I can barely use the phone
http://www.youtube.com/watch?v=qW5f1nHUmwY
I got my replacement today, brand new, hardware 0004. My first one was 0003. I am slightly disappointed because I can tell I have the "bad" screen version. It has a much more yellow tint to it than my first one. My rebate is also going to be declined now unfortunately, and it's going to be a hassle I can already tell.
Edit: I thought I have the worse screen, but it looks a lot better than the youtube comparison video I have seen. It also fades the different brightness settings rather than a solid quick change using power control. It still is a tad more yellow I think. I hope I can root this one just as easy as my last one.
I just picked up 1 of 2 A100's on BF at Walmart. And the unit I got had been opened with the writing "Display" on the box. Since walmart was willing to match Best Buys price of 189.99 I felt it was worth the risk as these are somewhat difficult to get. Even at the higher prices. So, I took it home and plugged it in. It did boot fine the first time. However, after the second boot something strange started happening. In the lower right hand corner the battery/wifi connection box would continuously pop up and go away repeatedly. It would also bring up the settings window almost as if someone was continously touching the screen i guess.
I then did a factory reset and the first boot was fine. However, when i turned it back on it started doing it again.
It appears that the Iconia Tab has a screen flicker issue but I'm curious if that is what I'm seeing. And if so what are my options? I would like to keep the thing and don't want to pay full price. So should I call acer, return to walmart when they have inventory, or is there a fix out there.
Me thinks you should of bought the 2nd, unopened unit. Buying an open box item is always risky and I'm surprised you didn't pay less than $189.
I would bring it back and return it. Wait for a new one...sounds like this one might have taken a fall or two?
I doubt you would have to pay full price...besides, BB's prices are good until Sunday...you could call 15 Wal-Mart's and find one by then.
i had no choice i was second in line.....no worries though i found another walmart that had one left at 10am and returned it for an unopened one.
I bought an 8GB A100 unit a month ago here in Italy and it is starting this weird behaviour since a week too. I cannot replicate the problem all the times. Sometimes it works perfectly, sometimes it starts clicking like crazy and opening panels and apps all by itself.
When this happened, I tried to light shake it in case of false contacts, but this doesn't seemed to stop the clicking. Also I tried to super clean the surface of the tablet blaming on excessive grease or moist, but got no improvements.
I noticed that this tends to happen more when I switch it on after a walk with the A100 in my coat's pocket, but if I use it when it is on my desk, most of times it works with no problems.
I can't decide if returning the unit or not. A month is passed and returning policies here are not granting users as much as in the US. Expecially if the problem can't be reproduced "on demand".
I don't know what to do.. maybe trying a reset could help, but as I can see from pabdaddy1995, not too much. Let's hope a firmware update can solve this.
Ciao from Claudio
pabdaddy1995, marvin2k,
This is the same problem that I've faced after installing swiftkey keyboard.
After removing it, it worked perfectly!!!!
There is something you guys are doing and you might ignored it or you didn't pay attention to that caused this problem.
Try deleting/ uninstalling new apps you added recently.
Good luck!
pabdaddy1995 said:
I just picked up 1 of 2 A100's on BF at Walmart. And the unit I got had been opened with the writing "Display" on the box. Since walmart was willing to match Best Buys price of 189.99 I felt it was worth the risk as these are somewhat difficult to get. Even at the higher prices. So, I took it home and plugged it in. It did boot fine the first time. However, after the second boot something strange started happening. In the lower right hand corner the battery/wifi connection box would continuously pop up and go away repeatedly. It would also bring up the settings window almost as if someone was continously touching the screen i guess.
I then did a factory reset and the first boot was fine. However, when i turned it back on it started doing it again.
It appears that the Iconia Tab has a screen flicker issue but I'm curious if that is what I'm seeing. And if so what are my options? I would like to keep the thing and don't want to pay full price. So should I call acer, return to walmart when they have inventory, or is there a fix out there.
Click to expand...
Click to collapse
When you say "flicker" do you mean a VERY brief flash, like the speed of a blink of the eye, of some crazy shape?
My A100 has also done this ever since I got it. I swear that every time it happens it looks like my screen is cracked, but upon close examination, there really are no cracks in the screen. No random apps or windows pop up or anything like that, but when the flash occurs, the screen will turn funny colors and a crack in the shape of a funny looking X will appear all in the blink of an eye. But its not very often that this happens, so I'm not really gonna bother with it. Plus it was fresh from the box, never a display.
ummmmm............ could you repeat that?
Recently I returned my Razer because the vibration in my phone sounded horrible. Over two weeks later I got a replacement phone back and the vibration ended up sounding even worse than the first so I just assumed they're all this crappy. Then one day later after setting up my second Razer phone this happened.
The screen went black and clicking the power would vibrate but the screen wouldn't come on until eventually, it appeared as you can see in my screenshots. I managed to factory reset it and even after it still appears cut in half until finally, I was able to power it off again and restart, which after it seemed fine for a bit before the entire scenario replayed itself. Has anyone else experienced anything like this?
Obviously abnormal behavior. I'd try another rma
Can confirm that mine does a similar thing. Every now and again left half of the screen would freeze. It happens for a few seconds and comes back normally. I saw it first about a week ago, but thought it had to do with a specific app. Since then I had it happening in other apps and home screen.
Can't say I've seen this, and that's from 3 phones. Have yet to update to the new firmware yet though.
I have seen that with some company's laptops before and generally its had to be put down as Dead on Arrival as usually caused by some physical damage to the screen. With phones I cant say I have ever seen it happen on a small screen but certainly get it sent back as from 10 years in repairs I wouldn't see a software fix for that type of screen issue.
UPDATE
Mine went from having left side glitch occasionally to the who screen turning back every now an then. Left side is mostly frozen. On the bright side, I found that if you apply some light pressure to the middle of the bottom grill you can get the screen back pretty reliably. Judging by disassembly video it is where screen cable is bent to go under screen assembly, so it is probably result of some stress/tearing of that cable. Would explain partial malfunction as opposed to complete failure, but I can obviously be wrong.
Also, RMA was granted without a problem after we tried a factory reset with the tech.
RMA would be the best bet. I am surprised by the defective stories popping up, but at the same time I don't think I've even counted 100 people that have had a defect requiring an rma. And we know they sold at least 1,337 of the phones, so that's still a decent failure rate.. Though I think they need to revisit it and get that number lower.
yeah without question send it back to the store as dead on arrival or rma the phone - sooner its sent back the better with laptop screens doing this 9/10 times was the screen was broke and mainly a loose cable or dropped by the user. 1st 30 days or so the retailers and laptop manufacture could replace them but the longer it took to report it the more inclined to treat it as damage and not cover it under warranty.
Yes im comparing a phone screen to a laptop and normally a loose or damaged cable would show signs of this, Could be temperature related as well.
It was pretty much dead on arrival it's just annoying to have to go through another RMA and the whole 2-3 weeks before getting another replacement.
Also whoever mentioned squeezing the bottom speaker is correct that temporarily fixes the issue.
My Razer phone screen has failed
I've owned the Razer phone for less than two months. Yesterday, I went to wake the screen from sleep (press power button). The phone displayed random black and white bars pulsing across the entire screen. I was unable to interact with the phone while it was in this state. I restarted the phone by holding the power button and volume up at the same time. The phone restarted but the screen remained black ; the screen did not light up at all. The phone was in fact powered on and eventually the android "tic...tic...tic" sound played during device boot, when awaiting user input (android tic sounds played while awaiting password input during startup). While the speakers worked the the power led located in the bezel still lit, the screen remained OFF/dark. While continuing to hold the phone and move it around the screen finally lit. The left side of the screen appears "stuck" (does not refresh). Whatever was displayed on the screen when this condition occurs remains frozen on the left side of the phone. It's a perfect 50/50 split. In other words, the left 50% of the screen (portrait orientation) has a complete image "stuck" on the screen from whatever was displayed when the screen last froze (eventually it releases and then immediately freezes again). The frozen left side of the screen eventually updates as you continue to interact with the phone (this is NOT anything like burn-in). It's lit nice and bright but the left side of the screen appears to freeze and will not refresh while you interact with the device. The right side of the screen continues to update normally. I was able to capture a screenshot (power button + volume down) and confirmed the image captured does NOT reflect the display issue. This appears to be a hardware failure. Other Razer phone owners are reporting it and a video has been posted to YT demonstrating the "Razer phone screen problem?". Razer has offered an RMA however they DON'T afford advance RMA (you must ship your device to them, they receive it, then eventually ship a replacement). That's unacceptable for a $700 phone that took over a week to arrive because they shipped it from HK and got stuck in customs. Buyers beware, I would avoid this phone for now until the cause of this issue is identified OR Razer strengthens their replacement processes..
update/more info: I was able to complete a factory reset and the issue persists.
also, as another user stated above, pressing lightly and applying pressure around the edges or to the screen does appear to cause the screen to light back up again when it's dark (in other words the screen goes to black and will not wake. then when you apply some light pressure around the device it reliably lights the screen again; until the next failure which is moments later)
Hi my razer did up date swiched off and has never come back on dont even show charging has eny one els had this
I've got my Razer phone on the 20th of December 2017. Used it a couple of months before noticing the entire top part of the screen having dead zone. Rendering my phone to be unable to tap on anything on the dead zone. I've proceeded to exchange emails with Razer and got it RMA-ed on the 20th of March 2018. To my surprise. My 2nd set is experiencing the same exact issue right now in less than a month of using it. Are there anyone else out there experiencing this issue?
Got my razer phone on the 20th December, last month while using Google maps the left side froze for a bit, fixed it at the time with a reboot, didn't do it again till last week and now does it all the time. I'm waiting for an RMA guy from razer to email me back, and I've put a post on Reddit under the /r/razerphone sub to keep everyone interested how my RMA process is going to go. How long does it take to get your fixed/replacement phone back to you? If I dropped the phone and broke the screen, my insurance company would replace it and get it back to me within 5 days for £25 fee. I bet razer are gonna take weeks.... ?
razer screen problem
since i got the phone at the start the screen was flashing black then an hour later phone was all gucci,now if i press the side of the speaker like a small bit harder the whole screen goes black untill i manage to restart the phone, now at all i dunno whats happening nothing happens all i does it vibrates when i try to unlock the phone theres no sound anymore when the phone gets unlocked so im guessing i cant restart it anymore cause it dosent unlock :/
if you need any pictures / videos
Dm me on IG: Pekiuks_YT
discord : Pekiuks#7734
ok thanks , i should refund it or no because i need to factory reset it but i cant see anything cause the screen is black .
Anatoli
ZaccTeo said:
I've got my Razer phone on the 20th of December 2017. Used it a couple of months before noticing the entire top part of the screen having dead zone. Rendering my phone to be unable to tap on anything on the dead zone. I've proceeded to exchange emails with Razer and got it RMA-ed on the 20th of March 2018. To my surprise. My 2nd set is experiencing the same exact issue right now in less than a month of using it. Are there anyone else out there experiencing this issue?
Click to expand...
Click to collapse
Bought Razer in March. And now have same problem !