Develop Bugs

is it bricked ?

i tried to do a beasty wm6 rom update, everything went well, and at the end of the procedure, it ask me to "press 0 to restaure factory setting" for rebooting, i press 0 and then....nothing. Impossible to start the htc, i can only access bootloader mode, but ain't no more recognize by the pc, i tried to plug it to AC power as i thought of a battery prob, and still nothing, no start, and no led telling me that it's recharging...
i ve done some search on the forum, but can't see something similar to this.
anyhelp welcome
regards

Hi,
did you try to downgrade it to WM5? I also had problems with WM6 and after a downgrade to WM5 it worked again.
Cheers
Michael

sorry wrong thread.

well now when i connect it to my pc it says unknown device, so i dunno how to reflash to wm5
im on vista 64, and when i try to install the 64 driver it gave me on error about a corrupted driver...

Hi
I have the same problem,cannot recognize the usb port.
Anyone has an idea??

try changing your cable and if possible try using a xp machine. i have heard of people having problems when flashing with vista (i did it and no problems)
If after you change the cable, and use a differente computer the universal when you put it in bootloader mode and the word SERIAL does not change to USB i would say its pretty much bricked but if you only flashed your device i would say it is still possible to bring it back from death.
try changing your cable (specially if its the one you usually use) im almost sure thats your problem.
also make sure you dont have the sd card or the sim in it that seems to help too.
best regards and best of luck
Erik

luxeomni said:
im on vista 64,
Click to expand...
Click to collapse
Thats your problem! Vista is very shaky at best with flashing via USB on HTC devices.
Reflash to WM5 using the SDCard method.
Psi

this worked for me
follow the directions on this thread it worked for me http://forum.xda-developers.com/showthread.php?t=291723

Cannot connect my Universal

i installed actisync to my wind vista then connected my universal an error apears on my pc says "the connected USB is not recognised"
having the same error on win xp sp2
any help plz :S:S
informations:
wm6
ROM version 2.02.02WWE
RADIO version 1.15.00
Protocol version 42.51.P8
ExROM version 2.03.07WWE
10x

3asfour said:
i installed actisync to my wind vista then connected my universal an error apears on my pc says "the connected USB is not recognised"
having the same error on win xp sp2
any help plz :S:S
informations:
wm6
ROM version 2.02.02WWE
RADIO version 1.15.00
Protocol version 42.51.P8
ExROM version 2.03.07WWE
10x
Click to expand...
Click to collapse
2 things:
1. Please READ the Wiki
2. In vista activesync is replaced for Windows Mobile Device center, uninstall activesync and replace with WMDC
Good luck,

i already installed windows mobile device center, i was trying what they said in wiki but stilll couldint connect:S
btw everytime i reset my universal im having a boot menu
one other prob when my battery goes to 85% the universal shut down
10x for ur reply orb3000

3asfour said:
i already installed windows mobile device center, i was trying what they said in wiki but stilll couldint connect:S
btw everytime i reset my universal im having a boot menu
one other prob when my battery goes to 85% the universal shut down
10x for ur reply orb3000
Click to expand...
Click to collapse
I would suggest try to flash another ROM, and perhaps replacing the battery could help
Good luck!

Sir, can i flash an other rom if i cannot connect my machin to my pc?

batery raplaced but still same prob cannot connect:S

3asfour said:
batery raplaced but still same prob cannot connect:S
Click to expand...
Click to collapse
try to move your USB connector on the Uni.
It sounds as though the port is damaged, if you move it slightly it may connect.
However if the port is damaged, I strongly suggest repairing it before trying to flash another rom. Replacement ports are not expensive and to replace the connector is an easy job.
Cheers,
Beasty

ill try that as soon as i find time to do it 10x for ur help
btw its charging normaly from the charger

3asfour said:
ill try that as soon as i find time to do it 10x for ur help
btw its charging normaly from the charger
Click to expand...
Click to collapse
Charging does not necesairly mean the data pins are aligned correctly.
The other option available is to enter bootloader mode, then plug the device in to the pc and see if the bootloader changes from saying serial to usb.
cheers,
Beasty

Again Problem with Bootloader...Help Needed :-((

Hello there,
i did try to upgrade my HTC Uni today....did not do this in a long time...but wanted to try a new image...well....somehow the upgrade did not work, and now i am Stuck in Bootloader...
.I have a G3 Unit with Bootloader 1.01,
when i plug the device in, there is USB on the screen....
on the PC i use Vista. Installed the drivers worked good before..
.when i plug in my HTC via USB in Devicemanger it is found as "Mobile Device-> Microsoft USB Sync"
I tried mtty.exe now, used USB but mtty always says "USB Port can not open" :-(
Any chance to get throu`?
I am sure its not broken, because i worked perfect before the upgrade....
Please guys...any help would be great! )
Maria

MariaKim said:
Hello there,
i did try to upgrade my HTC Uni today....did not do this in a long time...but wanted to try a new image...well....somehow the upgrade did not work, and now i am Stuck in Bootloader...
.I have a G3 Unit with Bootloader 1.01,
when i plug the device in, there is USB on the screen....
on the PC i use Vista. Installed the drivers worked good before..
.when i plug in my HTC via USB in Devicemanger it is found as "Mobile Device-> Microsoft USB Sync"
I tried mtty.exe now, used USB but mtty always says "USB Port can not open" :-(
Any chance to get throu`?
I am sure its not broken, because i worked perfect before the upgrade....
Please guys...any help would be great! )
Maria
Click to expand...
Click to collapse
I would try on an XP computer not in vista
In case you haven´t read please do: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
Don´t forget to vote!

Yeah...i tried the Wiki before..no chance...but you are totally right...today i tried an XP PC and it worked a treat......hmm....guess Vista really sucks! :-(
Thankx for the help anyway!
Maria

MariaKim said:
Yeah...i tried the Wiki before..no chance...but you are totally right...today i tried an XP PC and it worked a treat......hmm....guess Vista really sucks! :-(
Thankx for the help anyway!
Maria
Click to expand...
Click to collapse
Yeah I always flash on XP even with my laptop using Vista.
Anyway if you want to flash on Vista read here:
http://forum.xda-developers.com/showthread.php?t=313001&highlight=flash+vista
A pleassure to help you Maria!

Hi, all

Hi, I am new on this forum and I hope somebody can help me.
I have an Qtek 9000.
Now, he is dead.
I hope somebody can help me. (Please!!!!!)
My qtek 9000 is jammed. He does nothing more.
Try to reset., failed.
bootloader mode tried. (start-up + light + reset) failed. Only what I see = USB (on the top) and V1.00 on the bottom
Everything, also tried connecting with the PC. failed.
Il has no connection with my PC.
What I must doing now?
Can somebody help me? Thanks

Welcome to forums
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck,

Thanks
Jevis

no connection with my PC
orb3000 said:
Welcome to forums
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck,
Click to expand...
Click to collapse
Thanks for your advice, I have read it very carefully, but I don't get any response from my PC or device. I use Vista, is that perhaps a problem?
The device stay always on USB (on the top) and V1.00 (on the bottom)
Otherwise, when I started MTTY 1.24, it don't recognized USB, only COM 1, 2, 3.
My PC indicated USB connection, but not the device.
I can't quit the screen from the bootloader.
I am sure, I do something wrong. Please help me!!
Thanks

Vista is your problem, try it on Windows XP

to see USB on mtty, you need to uncheck the "allow USB connections" in activesync options

You can do it in Vista also
read here:
http://forum.xda-developers.com/showthread.php?t=313001&highlight=flashing+vista

THANKS EVERYBODY, IT WORKS !!!!!!
In the morning I have used the PC of my wife (XP) and it didn't work.
Now I have use the PC of my son, and it works!!(strange)
But by the MTTY I used COM1. It was flashing immediately.
I have not tried in vista. Maybe tomorrow.
Thanks for your help. Thanks, thanks.
Jer

Welcome to forum and you just learned a valuable knowledge... almost everyone at first have that problem.. I had same problem... and thanks to all the guyz here who share there knowledge and make this forum great
Enjoy you device...

other problem with my device
I will say it again, I am very pleased with your help,
Only, now I have an other problem. I will upgrade my device too http://www.qtek.nl/_BIN/UNI_DT_WWE_13077_176_10900_Ship.zip
Now it will crash again an is it back in the Bootloader mode.
I see on the top USB and on the bottom V1.00. What can I do?
Is it also possible to install Windows Mobile 6.1 on my device?
My device don't accept it.
Thanx

jevis said:
I will say it again, I am very pleased with your help,
Only, now I have an other problem. I will upgrade my device too http://www.qtek.nl/_BIN/UNI_DT_WWE_13077_176_10900_Ship.zip
Now it will crash again an is it back in the Bootloader mode.
I see on the top USB and on the bottom V1.00. What can I do?
Is it also possible to install Windows Mobile 6.1 on my device?
My device don't accept it.
Thanx
Click to expand...
Click to collapse
Try to use tomal's v8 or 9 both are great ... should not have any problem at all.... .. Try using XP it's easier...
Cheers
Rajiv

(Q)uk orange spv m2000 locked in bootloader

hi everyone ive had this problem with my spv m2000 being stuck in bootlad mode
i just cannot find a way out of it
i dont have a manual for the device
any help would be greatly recived
i have read through the htc blueangel service manual posted by chef tony but carnt get any response from the handset

ghostmachine said:
hi everyone ive had this problem with my spv m2000 being stuck in bootlad mode
i just cannot find a way out of it
i dont have a manual for the device
any help would be greatly recived
i have read through the htc blueangel service manual posted by chef tony but carnt get any response from the handset
Click to expand...
Click to collapse
Have you Windows 7?

i have windows xp and a windows 7 pc
the phone was running wm 2003

in case you tried upgrading from windows 7 you should follow d-two's tutorial here: http://forum.xda-developers.com/showpost.php?p=5456317&postcount=6

i have followed the guide and got nothing
its still in bootloader v2.08 i just hope its not a faulty phone

please post more detail, it is hard to guess, what actually caused it, when you just say, you are stuck in bootloader mode. what driver version shows up in device manager, does the BA's display change from serial to usb, when you connect it to the pc, what error do you get from the RUU, please post the RUU.log in C:\
which rom did you try to flash?
did you use d-two's new RUU?
can you connect using mtty?

the screen changes from serial to usb it has v2.08 at the bottom of the screen
the RUU dosnt register the device cannot conect using mtty
i havent tried to upgrade the device ive tried to leave the device with a battery to see if it will reset to default
but it just loads into the boot screen