Develop Bugs

[Q] Using unlocked TMO S3 on WIND mobile ?

Hey guys I recently got a TMO unlocked S3 that I would like to use on WIND mobile. Currently, I'm running Baseband: UVLJA and in the about phone --> Status --> the phone detects WIND, my own phone #, IMEI IMEI SV, IP Address etc and i HAVE 3G signal and everything but for some reason cannot browse the web OR send any SMSs :/
I tried flashing a WIND mobile radio but i lose IMEI! I know there is a way to use TMO S3 on WIND but help would be GREATLY appreciated
P.S. Im running CM10 stable
Thanks a bunch!

Check APNs
nicefella said:
Hey guys I recently got a TMO unlocked S3 that I would like to use on WIND mobile. Currently, I'm running Baseband: UVLJA and in the about phone --> Status --> the phone detects WIND, my own phone #, IMEI IMEI SV, IP Address etc and i HAVE 3G signal and everything but for some reason cannot browse the web OR send any SMSs :/
I tried flashing a WIND mobile radio but i lose IMEI! I know there is a way to use TMO S3 on WIND but help would be GREATLY appreciated
P.S. Im running CM10 stable
Thanks a bunch!
Click to expand...
Click to collapse
Did you check the APNs to make sure the internet.windmobile.ca APN is there already?
(If you haven't go to: System Settings > Mobile Networks > Access Point Names > check for Wind CA)
If you don't have Wind CA, press Menu > New APN > and in Name type Wind CA, APN: internet.windmobile.ca, MCC: 302, MNC: 490, APN type: default,supl, APN protocol: IPv4 .
Hope this works!

HOLY! Thank you so much Man you just saved me thanks a lot!!!1

problem with network needs to be repaired lg-g3 d885

I wanted to fix internet network on 4G so from dailpad I enterd
*
855
#
3845
#
which is advanced way for modifing on mobiles settings, but once I enteren on:
LTE-ONLY> Modem Setting > LTE Band Selection
and by fault I chose on a band(don't know which one) then the 4G is refusing to connect at all. <<<-------problem starts from here
I tried to repair it by choosing these bands: (band3=1800Mhz & band40=2300Mhz) sence it's our bands here in Saudi Arabia for STC company, but it didn't work.
In my city the only ban activated is 40=2300Mhz.
Do you have any solutions? let formatting be the last solution.
if I upgraded to lollipop would it solve the problem?
LG-G3-D885 kitkat

uppp

myp1lteandroid said:
uppp
Click to expand...
Click to collapse
Did you check your APN settings?
Try deleting your existing APn settings and then reimporting it

itsbighead said:
Did you check your APN settings?
Try deleting your existing APn settings and then reimporting it
Click to expand...
Click to collapse
it is the first thing i did

I updated it to android 5 but the problem still !!!

have you tried this?
in LTE ONLY > Rat selection> gsm/wcdma/lte auto and uncheck every bands in lte band selection?
and after that check apn settings ...
i've messed up soemthing in NV values of phone and when i choose gsm/wcdma/lte in mobile networks , there is no apn (which i have), but when i choose gsm/wcdma only , apn are there

Always in Roaming Mode

Hi All,
The 2 sim card of my Elephone P8000 are alwas in Roaming mode (4GR) ?
The phone is supposed to be fully unlocked. To use LTE/4G i have to allow roaming.
Thank's for your help,

I have same Problem. 2G works, 3G and 4G only with activated Data Roaming. Net is O2 Germany

Gobiwan12 said:
I have same Problem. 2G works, 3G and 4G only with activated Data Roaming. Net is O2 Germany
Click to expand...
Click to collapse
I am on O2 as well and have the same issue. The cause is, that O2 and E-Plus merged their networks using "National Roaming". You can also read on the website of O2 that on some phones you have to enable roaming to make the phone accepting the E-Plus network.
I am currently investigating this issue and try to find a solution with minimal effort and without flashing a custom recovery so you will not loose OTA. Rooting your phone will definitely be required.
Cheers

For me the first sim card is "Virgin Mobile" (use sfr network) and the second sim card is "Free Mobile" and both are in roaming mode in order to have 4G (LTE) functional.

Have a look at this thread: http://forum.xda-developers.com/elephone-p8000/development/mod-remove-roaming-home-network-t3206004

Hi,
I follow this thread, and i have no more roaming in both sim cards
In my case
Sim 1 : Virgin (mcc 208, mnc 23) it use SFR network (mcc 208, mnc 10)
Sim 2: Free (mcc 208, mnc 15) it use orange network (mcc 208, mnc 01)

:good: This is my framework-res.apk it was build for Virgin (FR) and Free (FR) for Rom Stock 07252015. If you use this version of Rom then you can use it on your P8000. If you use another ROM version, you have to build your own framework-res.apk

Carrier problem

Hi everyone!
I have a D852G with vidéotron (a carrier here in canada) but I can't connect to vidéotron network!
Instead, I'm connected to rogers (another carrier) and I can't get LTE to work, I only have 2G, 3G and 4G
My apn is setup and I flashed my device lollipop modem
I am running Cloudy g3 2.5
Any help is highly appreciated!

Did you use these APN settings?...
Name: Videotron mobile
APN for a 4G SIM card and device: media.videotron
APN for an LTE SIM card and device: media.ng
MMSC: http://media.videotron.com
MCC : 302
MNC : 500
APN Type: default,mms,supl
Leave all other fields empty.
Click to expand...
Click to collapse

redduc900 said:
Did you use these APN settings?...
Click to expand...
Click to collapse
Yes, I used these

Assuming you're using a Videotron LTE compatible SIM card, you may need to contact them and have your phone re-provisioned.

redduc900 said:
Assuming you're using a Videotron LTE compatible SIM card, you may need to contact them and have your phone re-provisioned.
Click to expand...
Click to collapse
On stock rom it work, so its not a hardware problem. I wont contact them to help me to setup the custom rom..

[I747M] Change CSC

Hello everybody,
I have a samsung I747M from Canada. I'm french and I'm using it here.
Data connexions are only in EDGE (the same as 2G). I want to have 3G data connexions. All the settings in the NPA are good.
I think the problem come from the CSC which is still the one attached to Canada (BMC).
All the firmwares are for Canada. I want to change the CSC (BMC now) to XEF (the one for France).
Does someone have an idea to fix this situation ?
Thank you and Merry Christmas !
PS : Sorry for my english...

You might have to carrier network unlock the phone.

Does the i747m support the carrier's 3g frequencies?

StoneyJSG said:
You might have to carrier network unlock the phone.
Click to expand...
Click to collapse
Thank you for your answer but my phone is already unlocked.
I'm using it in France with a local operator (Bouygues). Data connexions are only in 2G and not in 3G.
I think if I will change the CSC it will be good

audit13 said:
Does the i747m support the carrier's 3g frequencies?
Click to expand...
Click to collapse
I think so.. How can I know pleas ?
In network settings there are GSM, LTE etc

You can check here: http://willmyphonework.net/

audit13 said:
You can check here: http://willmyphonework.net/
Click to expand...
Click to collapse
I've checked and it works in 3G

I don't think it is a firmware problem because I took my s3 to London a couple of years ago. It was running stock bell firmware, network unlocked, and I was able to get 3G data connections without doing anything to the stock rom. Changing the Csc should not make a difference.