Develop Bugs

[Q] Using unlocked TMO S3 on WIND mobile ?

Hey guys I recently got a TMO unlocked S3 that I would like to use on WIND mobile. Currently, I'm running Baseband: UVLJA and in the about phone --> Status --> the phone detects WIND, my own phone #, IMEI IMEI SV, IP Address etc and i HAVE 3G signal and everything but for some reason cannot browse the web OR send any SMSs :/
I tried flashing a WIND mobile radio but i lose IMEI! I know there is a way to use TMO S3 on WIND but help would be GREATLY appreciated
P.S. Im running CM10 stable
Thanks a bunch!

Check APNs
nicefella said:
Hey guys I recently got a TMO unlocked S3 that I would like to use on WIND mobile. Currently, I'm running Baseband: UVLJA and in the about phone --> Status --> the phone detects WIND, my own phone #, IMEI IMEI SV, IP Address etc and i HAVE 3G signal and everything but for some reason cannot browse the web OR send any SMSs :/
I tried flashing a WIND mobile radio but i lose IMEI! I know there is a way to use TMO S3 on WIND but help would be GREATLY appreciated
P.S. Im running CM10 stable
Thanks a bunch!
Click to expand...
Click to collapse
Did you check the APNs to make sure the internet.windmobile.ca APN is there already?
(If you haven't go to: System Settings > Mobile Networks > Access Point Names > check for Wind CA)
If you don't have Wind CA, press Menu > New APN > and in Name type Wind CA, APN: internet.windmobile.ca, MCC: 302, MNC: 490, APN type: default,supl, APN protocol: IPv4 .
Hope this works!

HOLY! Thank you so much Man you just saved me thanks a lot!!!1

[Q] Huawei Ascend P6 Dual Sim issues

Hello,
*
I just bought a Huawei P6 C-00 Dual Sim from China ( not possible to add a SD card but the internal memory is 16 GB).
*
After some tests , I found some issues :
*
1 / As dual sim , there are two slots :
*
- The first for a GSM SIM card : Incoming call \ outgoing OK , but can not connect to internet via GSM network ( problem described in point 2 )
- The second port is for a CDMA SIM card : my sim card does not work and no network is detected ( ? ) . After some web research, I understand that this port is designed to support only a SIM card from China Telecom ( so the port is blocked on China Telecom) .
that this port operates with GSM 2G Network while the CDMA port for 3G Network !
*
==> Question: How can I unlock this CDMA slot in order to connect my sim card and use the 3G network? Is there a way , a software, or a code for the release\ Unlock of this port?
*
2 / Let's return back to the first GSM port that seems to work fine until I start doing the manual configuration of the mobile internet via a new APN (us this mobile is new, it is not possible to configure automatically with my provider).
In fact the boxes corresponding to MCC and MNC are locked ! I can not edit this to put the country code MCC and the operator code MNC . these parameters are locked with MCC = 460 ( China) and MNC = 03 (China Telecom) !
*
==> Question: How do I unlock these boxes to put good values ​​MCC and MNC and able to connect to internet via GSM ? Knowing that the wifi works great !
*
3 / Question: If I can root my phone , is it possible to overcome the above two problems? have the CDMA Unlocked and Port boxes MCC and MNC ?
*
Thank you for your help

CDMA and WCDMA phones use a different radio modules, a mean the different hardware. You can't just unlock it to use WCDMA network.
Sent from my HUAWEI P6-U06 using Tapatalk

alex.79 said:
CDMA and WCDMA phones use a different radio modules, a mean the different hardware. You can't just unlock it to use WCDMA network.
Sent from my HUAWEI P6-U06 using Tapatalk
Click to expand...
Click to collapse
So no solution to use WCDMA ?
And what about the issue of locked MCC & MNC code ? How can i unlock them for modification ?
thanks

seyf.jerbi said:
So no solution to use WCDMA ?
And what about the issue of locked MCC & MNC code ? How can i unlock them for modification ?
thanks
Click to expand...
Click to collapse
Yes, this is GSM/CDMA phone and it can work only with GSM and CDMA networks.

Is it too late?
First of all, I am not an android mobile technician.
I am also learning how to tweak android phones by studying from this and that forums.
In our country, Myanmar, we use mostly Huawei handsets and especially CDMA ones.
Secondly, I hope you haven't thrown away that P6 C00.
I think it might be possible to overcome some of the obstacles you are currently facing:
Q3:Unlocking China Telecom lock and MCC and MNC editing
Q1 & Q2 shall be answered once we can solve Q3.
Thirdly but most importantly, you are going to be needed to have to unlock the bootloader and root access both of which are not really difficult.
There are a lot of Myanmar/other forums giving tutorials on this and I think P6 C00 is likely to be rootable and its bootloader unlockable.
Going back to Q3nce you got root access, you just need Buildprop editor installed from Playstore.
Then run it. Create a backup first. Then Edit and scroll down until you see ro.cdma.home.operator.numeric=46003 and change it to your mobile operators MCC and MNC. Save and Reboot. And go back into your APN settings. You will see that the MCC and MNC were changed and also editable.
I was frustrated for this for like a month and I just find out accidentally.
Of course, you should have a backup of your firmware, recovery and various other tools ready.
I think I should warn you that following my advice might brick your phone and if you do follow, it's at your own risk. Don't blame me.
Good luck Buddy.
If my advice were wrong somehow, I hope some other admin or technician would please kindly correct me. But I just got it working that way.

Have some question Help Pls

Hi all,
I just got a N900T which is sim unlocked
Device status is official
android version 4.3
baseband version is n900tuvubmi7
kernel version is 3.4.0-1670611
built number is jss15j.n900tuvubmi7
I personally have H2O service and would like to use this On H2O, what sort of steps I will have to do to upgrade this to the newer version of kitkat, root it, and possibly upgrade the modem to take advantage of ATT LTE, and a ROM which is provider neutral, deblouted, stable and fast.
Ill appreciate any help

liquidy said:
Hi all,
I just got a N900T which is sim unlocked
Device status is official
android version 4.3
baseband version is n900tuvubmi7
kernel version is 3.4.0-1670611
built number is jss15j.n900tuvubmi7
I personally have H2O service and would like to use this On H2O, what sort of steps I will have to do to upgrade this to the newer version of kitkat, root it, and possibly upgrade the modem to take advantage of ATT LTE, and a ROM which is provider neutral, deblouted, stable and fast.
Ill appreciate any help
Click to expand...
Click to collapse
Step 1: Chainfire Auto Root to root your phone
http://forum.xda-developers.com/showthread.php?t=2466423
Step 2: RegionLock Away to SIM unlock it
http://forum.xda-developers.com/showthread.php?t=2470551
As for upgrading the modem, I don't think it's necessary.
This is from the thread that discusses using the T-Mobile Note 3 on AT&T:
http://forum.xda-developers.com/showthread.php?t=2464498
Will LTE work on AT&T?
Many people have confirmed that LTE works. There is no speed difference between an AT&T branded phone and the Note 3. Documents obtained from the FCC and also on T-Mobile's site say it supports the frequencies used by AT&T. Do NOT give AT&T your IMEI to your Tmobile Note 3. If you do, AT&T's system will remove your LTE data even though it works perfectly. Give them another AT&T Android IMEI if you have to or if you are coming from an Android phone don't even talk to them. Just remove the SIM in your old phone and put it in your new phone. If you mess up and give them the IMEI some people have gone to the store and gotten the IMEI off the demo unit then gone home and called ATT to change the IMEI. You can also get an AT&T Android LTE IMEI from a family member or friend's phone. It will not effect their service in any way. One user also reported explaining the issue to a rep that changed the default plan and manually made it a plan with LTE. I'm not sure that a lot of reps on AT&T's front line know how to do this though.
What APN settings will my Note 3 need for AT&T and MVNO's?
NAME: ATT Phone
APN: phone
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
APN type: default,mms,supl,hipri
Then go to the home screen menu setting, more networks, mobile networks, network mode and change to LTE/WCDMA/GSM.
Although, you might want to try the settings that H2O has on their website to see which one gives you better speeds:
https://www.h2owirelessnow.com/mainControl.php?page=dataManualConfig
Step 3: Install ROM of your choice. My recommendation, Hyperdrive ROM. It gives you Aroma installer, which lets you customize basically every aspect of your install. http://forum.xda-developers.com/showthread.php?t=2709867
I hope this gives you the info you need to get up and running.

Thanks a Million

Always in Roaming Mode

Hi All,
The 2 sim card of my Elephone P8000 are alwas in Roaming mode (4GR) ?
The phone is supposed to be fully unlocked. To use LTE/4G i have to allow roaming.
Thank's for your help,

I have same Problem. 2G works, 3G and 4G only with activated Data Roaming. Net is O2 Germany

Gobiwan12 said:
I have same Problem. 2G works, 3G and 4G only with activated Data Roaming. Net is O2 Germany
Click to expand...
Click to collapse
I am on O2 as well and have the same issue. The cause is, that O2 and E-Plus merged their networks using "National Roaming". You can also read on the website of O2 that on some phones you have to enable roaming to make the phone accepting the E-Plus network.
I am currently investigating this issue and try to find a solution with minimal effort and without flashing a custom recovery so you will not loose OTA. Rooting your phone will definitely be required.
Cheers

For me the first sim card is "Virgin Mobile" (use sfr network) and the second sim card is "Free Mobile" and both are in roaming mode in order to have 4G (LTE) functional.

Have a look at this thread: http://forum.xda-developers.com/elephone-p8000/development/mod-remove-roaming-home-network-t3206004

Hi,
I follow this thread, and i have no more roaming in both sim cards
In my case
Sim 1 : Virgin (mcc 208, mnc 23) it use SFR network (mcc 208, mnc 10)
Sim 2: Free (mcc 208, mnc 15) it use orange network (mcc 208, mnc 01)

:good: This is my framework-res.apk it was build for Virgin (FR) and Free (FR) for Rom Stock 07252015. If you use this version of Rom then you can use it on your P8000. If you use another ROM version, you have to build your own framework-res.apk

Roger phone - Need MTS APN to work - help

Wrong APN data is inside this Rogers phone for MTS
apns-conf.xml is showing wapgw1.mts.net and mmsport 9201
It is my understanding that it should be using 209.4.229.90 and 9401 based on this article http://forum.xda-developers.com/g4/...-g4-phones-t3189469/post62576106#post62576106
How can I fix this?