Hello,
*
I just bought a Huawei P6 C-00 Dual Sim from China ( not possible to add a SD card but the internal memory is 16 GB).
*
After some tests , I found some issues :
*
1 / As dual sim , there are two slots :
*
- The first for a GSM SIM card : Incoming call \ outgoing OK , but can not connect to internet via GSM network ( problem described in point 2 )
- The second port is for a CDMA SIM card : my sim card does not work and no network is detected ( ? ) . After some web research, I understand that this port is designed to support only a SIM card from China Telecom ( so the port is blocked on China Telecom) .
that this port operates with GSM 2G Network while the CDMA port for 3G Network !
*
==> Question: How can I unlock this CDMA slot in order to connect my sim card and use the 3G network? Is there a way , a software, or a code for the release\ Unlock of this port?
*
2 / Let's return back to the first GSM port that seems to work fine until I start doing the manual configuration of the mobile internet via a new APN (us this mobile is new, it is not possible to configure automatically with my provider).
In fact the boxes corresponding to MCC and MNC are locked ! I can not edit this to put the country code MCC and the operator code MNC . these parameters are locked with MCC = 460 ( China) and MNC = 03 (China Telecom) !
*
==> Question: How do I unlock these boxes to put good values MCC and MNC and able to connect to internet via GSM ? Knowing that the wifi works great !
*
3 / Question: If I can root my phone , is it possible to overcome the above two problems? have the CDMA Unlocked and Port boxes MCC and MNC ?
*
Thank you for your help
CDMA and WCDMA phones use a different radio modules, a mean the different hardware. You can't just unlock it to use WCDMA network.
Sent from my HUAWEI P6-U06 using Tapatalk
alex.79 said:
CDMA and WCDMA phones use a different radio modules, a mean the different hardware. You can't just unlock it to use WCDMA network.
Sent from my HUAWEI P6-U06 using Tapatalk
Click to expand...
Click to collapse
So no solution to use WCDMA ?
And what about the issue of locked MCC & MNC code ? How can i unlock them for modification ?
thanks
seyf.jerbi said:
So no solution to use WCDMA ?
And what about the issue of locked MCC & MNC code ? How can i unlock them for modification ?
thanks
Click to expand...
Click to collapse
Yes, this is GSM/CDMA phone and it can work only with GSM and CDMA networks.
Is it too late?
First of all, I am not an android mobile technician.
I am also learning how to tweak android phones by studying from this and that forums.
In our country, Myanmar, we use mostly Huawei handsets and especially CDMA ones.
Secondly, I hope you haven't thrown away that P6 C00.
I think it might be possible to overcome some of the obstacles you are currently facing:
Q3:Unlocking China Telecom lock and MCC and MNC editing
Q1 & Q2 shall be answered once we can solve Q3.
Thirdly but most importantly, you are going to be needed to have to unlock the bootloader and root access both of which are not really difficult.
There are a lot of Myanmar/other forums giving tutorials on this and I think P6 C00 is likely to be rootable and its bootloader unlockable.
Going back to Q3nce you got root access, you just need Buildprop editor installed from Playstore.
Then run it. Create a backup first. Then Edit and scroll down until you see ro.cdma.home.operator.numeric=46003 and change it to your mobile operators MCC and MNC. Save and Reboot. And go back into your APN settings. You will see that the MCC and MNC were changed and also editable.
I was frustrated for this for like a month and I just find out accidentally.
Of course, you should have a backup of your firmware, recovery and various other tools ready.
I think I should warn you that following my advice might brick your phone and if you do follow, it's at your own risk. Don't blame me.
Good luck Buddy.
If my advice were wrong somehow, I hope some other admin or technician would please kindly correct me. But I just got it working that way.
Related
hi,
first off all sorry for my poor english... :d
I bought a DHD from netherland actualy the phone comes from england( virgin telecom branded)
when i was home with my " new " phone. i started to unlock this machine.
- 1/ make a goldcard succeed
- 2/ downgrade to 1.32.x it was 1.75.x so i must be downgrade succeed
- 3/ radio s-off en then ENG s-off succeed
- 4/ then check my bootloader i have a supercid cid is 111......
everythink is okey so far my phone is unlockt.
now, in belgium we have 3 providers proximus, mobistar and base(kpn group)
if i insert proximus and mobistar i can send and talk no problem at all.
but if i insert base sim card i can't send or talk because i have no network,
but i have one think "mobile data" so i can to internet with gprs no network.
i have tried another base sim the same, i have tried my sim in other phone works perfect. i have talk to the service hotline they says everything is okey here you must be able to connect in our network.
when i try to manual search to a network en then select base i have a error
" your sim card doesn't allowed to register to this network"
i already install another radio, another rom...
who can help me, otherwise i gonna slam it to the f*cking wall.
thanks
my specs.
andriod : 2.3.2
baseband : 12.28b.60.140eu_26.03.02.26_m
kernel; 2.6.35.10-g4a4b278
build 2.16.0.0
andriod revolution hd 4 f*cking 0 :d btw: perfect rom i like it
Hi, don't apologise for your English, its perfectly understandable!
What frequencies does this Base use, are you sure the DHD supports them?
I remember a week or so back someone had the same issue with the Base network. I don't think that was resolved either.
hi,
base uses this band :E-GSM and DCS-1800
width(mhz) : 2 x 5 and for dhs-1800 :2 x 22
channel : 25 " " " " ; 110
i think desire hd is compatible with that frequencies stuff.
why have i grps network but no normal signals?
There is something to do with imei block or something?
I would try speaking to Base see if they offer support for DHD, if they do offer official support that would suggest it should work on their network, is Base in the APN list for ARHD?
i don't know exactly
i have been spoke with them. they says you must do a unlock for the phone
but i have already done, very f*king strange.
where you exacty can see for the arhd?
i think the best solution is: i gonna sell them, and buy a regular/no branded phone.
i worked 2 weeks with that phone.
erase everythink start again, again again. factory reset etc..
but sometimes i have network when i do restart iets gone again.
damn
nuri1 said:
but sometimes i have network when i do restart iets gone again.
damn
Click to expand...
Click to collapse
Sounds like an issue with ARHD to me, if you can see a network sometimes very strange, have you tried a different ROM? possibly just a rooted stock i.e one of the raidroid roms
Hi All,
The 2 sim card of my Elephone P8000 are alwas in Roaming mode (4GR) ?
The phone is supposed to be fully unlocked. To use LTE/4G i have to allow roaming.
Thank's for your help,
I have same Problem. 2G works, 3G and 4G only with activated Data Roaming. Net is O2 Germany
Gobiwan12 said:
I have same Problem. 2G works, 3G and 4G only with activated Data Roaming. Net is O2 Germany
Click to expand...
Click to collapse
I am on O2 as well and have the same issue. The cause is, that O2 and E-Plus merged their networks using "National Roaming". You can also read on the website of O2 that on some phones you have to enable roaming to make the phone accepting the E-Plus network.
I am currently investigating this issue and try to find a solution with minimal effort and without flashing a custom recovery so you will not loose OTA. Rooting your phone will definitely be required.
Cheers
For me the first sim card is "Virgin Mobile" (use sfr network) and the second sim card is "Free Mobile" and both are in roaming mode in order to have 4G (LTE) functional.
Have a look at this thread: http://forum.xda-developers.com/elephone-p8000/development/mod-remove-roaming-home-network-t3206004
Hi,
I follow this thread, and i have no more roaming in both sim cards
In my case
Sim 1 : Virgin (mcc 208, mnc 23) it use SFR network (mcc 208, mnc 10)
Sim 2: Free (mcc 208, mnc 15) it use orange network (mcc 208, mnc 01)
:good: This is my framework-res.apk it was build for Virgin (FR) and Free (FR) for Rom Stock 07252015. If you use this version of Rom then you can use it on your P8000. If you use another ROM version, you have to build your own framework-res.apk
Hello I have an Android device (Probably manufactured by ZTE but Sim 1 is the only 3G enabled slot and it is is locked to a particular ISP (MTN Nigeria ) .
any way to solve this?
Device info:
Stock AOSP
JellyBean
Hey,
I have been using a Huawei E5577Cs-321 Viva which was unlocked when I got it. My software version is 21.329.01.00.00. Web UI version 17.100.11.08.397. I am having problems when using it, it seems certain sites trigger the router login page. When I enter for example yahoo.com without (https://www.) the router login page seems to open instead. It also happens when I use only www.(some websites).com. I figured it out that it has something to do with security, since when I use https://www.(some website).com it works. The funny thing is most sites seem to work ok, but this is a huge pain and also you can't always do this for weblinks or web redirects. Is there a solution? I've reset the router, used multiple browsers and different phones and laptops and it continues to happen.
I have the following text in DC unlocker
DC - Unlocker 2 Client 1.00.1277
Detecting modem :
selection :
manufacturer - Huawei modems
model - Auto detect (recommended)
Found Applications port COM17
Found modem : E5577Cs-321
Model : Huawei E5577 (untested)
IMEI : 864695039897667
Serial NR. : D2LDW18525001727
Firmware : 21.329.01.00.00
Dashboard version : WEBUI_17.100.11.08.397_MRE5
Web UI version : WEBUI_17.100.11.08.397_MRE5
SIM Lock status : unlocked
Wrong codes entered : 0 (unlock attempts left : 10)
Can I downgrade without the modem locking? If so which softwae should I try? Right now it is V4 unlocked but, I was hoping if I can change the software it might work.
Solved. Router was downgraded to v. 21.328.62.01.397 and new Web Ui was installed. The router login redirects aren't happening as much as before.
Nobody has found a solution for this yet?
next4nextel said:
Solved. Router was downgraded to v. 21.328.62.01.397 and new Web Ui was installed. The router login redirects aren't happening as much as before.
Click to expand...
Click to collapse
Please help me on how to network unlock the e5577cs-321 ? software version 21.319.01.00.1387.
thank you.
Fixed It ...
I had The same Problem and it was because all the webui missing the dashboard quiq setup so it keep triggering the quiq set up page insted of some websites , i fixed it using T-Mobile webui wich will launch the setup page once and then it will work normally and her it is ...
3---E5577Cs-321_Update_WEBUI_17.100.20.00.709rd.exe
drive.google.com
Mhmd954 said:
Fixed It ...
I had The same Problem and it was because all the webui missing the dashboard quiq setup so it keep triggering the quiq set up page insted of some websites , i fixed it using T-Mobile webui wich will launch the setup page once and then it will work normally and her it is ...
3---E5577Cs-321_Update_WEBUI_17.100.20.00.709rd.exe
drive.google.com
Click to expand...
Click to collapse
Thanks brother, I was away for a while and did not see your post. I had successfully done the same with a T-mobile webui also around 6 months ago, it was a Russian or Eastern European, maybe Romanian T-mobile webui. This T-mobile webui stopped the redirects but it blocked a lot of sites, some social media, torrents and even regular sites, so I removed it. I then installed a generic webui and it was working fine until a few weeks ago and it started acting up again. Due to covid there hasn't been much work, so I haven't been buying data and using the 4g at all. Is your webui the same T-mobile one or a different one? Also does your device work in 3G? My device will only work on 4G or LTE. On 3G it will connect but will not load any pages, very low KB transfer rate less than 50KB/sec. I've tried different sims but it won't work in 3G. Can you send me the version # of your dashboard and firmware so I can confirm or not?
macTech007 said:
Please help me on how to network unlock the e5577cs-321 ? software version 21.319.01.00.1387.
thank you.
Click to expand...
Click to collapse
Sorry late reply, try this. Read whole thing carefully before trying. See if you can calculate the nck code without wiping your NVram. Meaning use only the usbsafe loader or the oem-nck_e5573b.bin loader.
Unlock Huawei Modems and Routers Free
If you have an Huawei Dongle and Router that needs unlock code, flash code, hash code etc you can get generate the codes yourself from the following links. 1. Huawei Modems (Old Algo most IMEI starts with 35-) V1 - Huawei Unlock Code Calculator...
forum.xda-developers.com
Which browser you are using. May be your Internet provider has done some firewall setting for http and www. Unlock mobile will not solve your problem.
You can get unlock code from imei number. You can install custom os of unlocked version.
how
Mobilelearner said:
Which browser you are using. May be your Internet provider has done some firewall setting for http and www. Unlock mobile will not solve your problem.
You can get unlock code from imei number. You can install custom os of unlocked version.
Click to expand...
Click to collapse
how can i find unlocked firmware for e5577cs-321 21.328.62.00.401 ?
Hello, I've been trying to upgrade my Huawei E5577Cs-321 mifi firmware and I think I messed up somewhere and now I'm stuck on the Huawei boot logo. When first inserted in dc-unlockers, this is what I get;
Found Applications port COM12
Found modem : E5577Cs-321
Model : Huawei AuthVer 4 modem (New)
IMEI : 860783033917113
Serial NR. : D2LDU16512001902
Firmware : 21.180.99.04.00
Compile date / time : Jun 12 2015 19:09:24
Hardware ver. : CL1E5573SM11
Dashboard version : WEBUI_17.100.11.00.03_MRE5
SIM Lock status : unlocked
Wrong codes entered : 0 (unlock attempts left : 10)
Can someone please help me out.
i had a problem i dont know how to openline this unit can somebody help me to unlock for free is been 4 year the huawie e5577 cs321 v. 21.328.62.01.397 and i dont know how??
is it the CP or the CSC? I have a korean 'N' S9 but I live in a country that gets the International 'F' devices, and my data network speed is garbage compared to the local samsung devices, and I was wondering whether this was a firmware issue or a hardware issue (as in the components in the korean version are somewhat different).
Coomer91 said:
is it the CP or the CSC? I have a korean 'N' S9 but I live in a country that gets the International 'F' devices, and my data network speed is garbage compared to the local samsung devices, and I was wondering whether this was a firmware issue or a hardware issue (as in the components in the korean version are somewhat different).
Click to expand...
Click to collapse
radio firmware and band selection found not within firmware, rather its located in the service menu. *#2263#
BEWARE tho. There are things in that menu that if you eff them up, theyre no un-effing them up
Hello I have a similar issue :
I bought a SM-G960U to use in a country where we normaly use the 960F version..... The caracteristics of both phone are similar for GSM/UMTS/LTE and should be compatible, but my G960U has a very poor signal reception, and a very bad speed for LTE/4G
Is It possible to flash the G960U with a 960F ROM ? Will It improve something ?
yan74s said:
Hello I have a similar issue :
I bought a SM-G960U to use in a country where we normaly use the 960F version..... The caracteristics of both phone are similar for GSM/UMTS/LTE and should be compatible, but my G960U has a very poor signal reception, and a very bad speed for LTE/4G
Is It possible to flash the G960U with a 960F ROM ? Will It improve something ?
Click to expand...
Click to collapse
well, technically..... its possible, but for the sake of conversation, no. You cant flash a F ROM on a U device. The issue youre having is due to the LTE bands enabled on the phone. The only way to change those is with the service menu, which i do not know how to navigate on this phone. To get to the service menu, go to the dialer and enter *#2263# and itll bring up the service menu which is only navigable with the keypad. It should show you a menu with corresponding numbers, but DO NOT MESS AROUND IN THERE!!!
You have been warned, and im not kidding. If you mess stuff in that menu, it could be permanent and could brick your phone
OK, thanks for your advice .....
*#2263# doesn't work for me, but with *#0011# I can access to the "service mode" ... Is it the same than "service menu" you were talking about ?
I've found some informations here (sorry it's in french, and the video in spanish)
https://lafibre.info/4g/forcer-samsung-freq/
The problem is that to accesds the menu : the step 3 doesn'nt work (type Q and after 0000 ) the menu doesn't open in my phone
yan74s said:
OK, thanks for your advice .....
*#2263# doesn't work for me, but with *#0011# I can access to the "service mode" ... Is it the same than "service menu" you were talking about ?
I've found some informations here (sorry it's in french, and the video in spanish)
https://lafibre.info/4g/forcer-samsung-freq/
The problem is that to accesds the menu : the step 3 doesn'nt work (type Q and after 0000 ) the menu doesn't open in my phone
Click to expand...
Click to collapse
here, there are several *# code combinations that folks use come on over to this thread. Different phone, i know, but its just the + of the same device