Hello I have an Android device (Probably manufactured by ZTE but Sim 1 is the only 3G enabled slot and it is is locked to a particular ISP (MTN Nigeria ) .
any way to solve this?
Device info:
Stock AOSP
JellyBean
Related
Dear All
I have a problem and am sure some one in XDA Forums can help me out ::crying:
I am from New Delhi, India and I bought a used unlocked Samsung Galaxy Note ( SHV-E160L , U+LTE ) in Seoul ,Korea.
The seller assured that the phone is unlocked....
My 3G enabled Indian SIM card works fine here in Korea on International roaming but was advised by a friend that this model will not work in India.
Can anyone please advise whether this model would work on GSM networks in India ?
In case it does not work can some Custom ROM be downloaded to make it work for Indian Service Providers ?? I am a novice in terms of flashing the ROMS and Kernel versions etc. thus worried ....
Any help/suggestions in the above regard would be sincerely appreciated.... Awaiting your suggestions !!
Ams
Hello Amit,
Did you receive any updates for your query ? Were you able to use U+ LTE version of Korean Note (E160L) on Indian GSM Network?
I'd be happy if there is any other Happy User of E160L on Indian GSM networks Please let me know, as my friend too is planning to buy one.
Thanks!
If anyone else too is looking for the answer:
Yes!! SHV-E160L on stock binary worked perfectly fine on Indian 3G/2G GSM network (Airtel Karnataka).
Baseband Version: E160L.FH02.1442.LT
Build number: IMM76D.UH24
Samsung Galaxy S SGH-T959 T-mobile
Sim network unlock Pin ......
Model : SGH-T959
Firmware : 2.1update1
Basebran version :T959UVJI6
Kernel version: 2.6.29
Build number : ECLAIR.UVJI6
made in taiwan
I have no knowledge of the mobile phone repair.
I have experience in computer ...
Help me with, I want to unlock it.
Sim network unlock Pin ....
Thailand TH Gsm.
Hello,
*
I just bought a Huawei P6 C-00 Dual Sim from China ( not possible to add a SD card but the internal memory is 16 GB).
*
After some tests , I found some issues :
*
1 / As dual sim , there are two slots :
*
- The first for a GSM SIM card : Incoming call \ outgoing OK , but can not connect to internet via GSM network ( problem described in point 2 )
- The second port is for a CDMA SIM card : my sim card does not work and no network is detected ( ? ) . After some web research, I understand that this port is designed to support only a SIM card from China Telecom ( so the port is blocked on China Telecom) .
that this port operates with GSM 2G Network while the CDMA port for 3G Network !
*
==> Question: How can I unlock this CDMA slot in order to connect my sim card and use the 3G network? Is there a way , a software, or a code for the release\ Unlock of this port?
*
2 / Let's return back to the first GSM port that seems to work fine until I start doing the manual configuration of the mobile internet via a new APN (us this mobile is new, it is not possible to configure automatically with my provider).
In fact the boxes corresponding to MCC and MNC are locked ! I can not edit this to put the country code MCC and the operator code MNC . these parameters are locked with MCC = 460 ( China) and MNC = 03 (China Telecom) !
*
==> Question: How do I unlock these boxes to put good values MCC and MNC and able to connect to internet via GSM ? Knowing that the wifi works great !
*
3 / Question: If I can root my phone , is it possible to overcome the above two problems? have the CDMA Unlocked and Port boxes MCC and MNC ?
*
Thank you for your help
CDMA and WCDMA phones use a different radio modules, a mean the different hardware. You can't just unlock it to use WCDMA network.
Sent from my HUAWEI P6-U06 using Tapatalk
alex.79 said:
CDMA and WCDMA phones use a different radio modules, a mean the different hardware. You can't just unlock it to use WCDMA network.
Sent from my HUAWEI P6-U06 using Tapatalk
Click to expand...
Click to collapse
So no solution to use WCDMA ?
And what about the issue of locked MCC & MNC code ? How can i unlock them for modification ?
thanks
seyf.jerbi said:
So no solution to use WCDMA ?
And what about the issue of locked MCC & MNC code ? How can i unlock them for modification ?
thanks
Click to expand...
Click to collapse
Yes, this is GSM/CDMA phone and it can work only with GSM and CDMA networks.
Is it too late?
First of all, I am not an android mobile technician.
I am also learning how to tweak android phones by studying from this and that forums.
In our country, Myanmar, we use mostly Huawei handsets and especially CDMA ones.
Secondly, I hope you haven't thrown away that P6 C00.
I think it might be possible to overcome some of the obstacles you are currently facing:
Q3:Unlocking China Telecom lock and MCC and MNC editing
Q1 & Q2 shall be answered once we can solve Q3.
Thirdly but most importantly, you are going to be needed to have to unlock the bootloader and root access both of which are not really difficult.
There are a lot of Myanmar/other forums giving tutorials on this and I think P6 C00 is likely to be rootable and its bootloader unlockable.
Going back to Q3nce you got root access, you just need Buildprop editor installed from Playstore.
Then run it. Create a backup first. Then Edit and scroll down until you see ro.cdma.home.operator.numeric=46003 and change it to your mobile operators MCC and MNC. Save and Reboot. And go back into your APN settings. You will see that the MCC and MNC were changed and also editable.
I was frustrated for this for like a month and I just find out accidentally.
Of course, you should have a backup of your firmware, recovery and various other tools ready.
I think I should warn you that following my advice might brick your phone and if you do follow, it's at your own risk. Don't blame me.
Good luck Buddy.
If my advice were wrong somehow, I hope some other admin or technician would please kindly correct me. But I just got it working that way.
E8372-153, E5573-609 Zong/Telenor/Airtel/other 21.329/21.333 secuboot/efuse firmware SIM unlock
I'm offering free SIM unlocking service for any of yours efuse/secuboot Huawei Balong modems.
Currently supported, but not limited to these versions and devices:
e5573Cs Airtel 21.333.64.01.284
e5573Cs Zong 21.328.62.00.1456
e5573Cs Zong 21.328.62.00.1460
e5573Cs Zong 21.333.64.00.1460
e5573Cs Zong 21.333.64.01.1456
e5577s 21.333.63.00.76
e8372 Telenor 21.333.63.00.1460
e8372 Telma 21.333.64.01.187
e8372 Zong 21.333.64.00.1456
e8372 Zong 21.333.64.01.1456
The unlocking is performed with a special unlocking file which you'll need to upload to the modem/router. To request the file, you'll need to get the response of the following commands:
Code:
AT^VERSION?
AT^DIESN
To get the response for AT^DIESN command, you'll have to run custom firmware, which you can find somewhere on the internet or make yourself with https://github.com/Huawei-LTE-routers-mods/huawei_balong_modfw_kitchen.
Send the output of AT commands above to [email protected] email and wait for 4-10 days.
The unlock is only for non-commercial usage and for up to 2 of your own devices. Please do NOT contact me for other questions over this email, do NOT include anything other than AT commands output. You need to be technologically competent to install the file by following the readme and figuring out everything by yourself.
Soft-bricked secuboot/efuse routers repairs
I'm also offering repair service for any Huawei Balong secuboot-enabled bricked modems without CPU or NAND resoldering, in Moscow, Russia.
You'll have to pay shipping costs to both destinations.
I'm also interested in buying soft-bricked modems for a reasonable price, to use it in non-commercial cell monitoring campaign.
Contact me: [email protected]
Added support for e5577s 21.333.63.00.76.
Also, I have successfully unlocked new E3372-320 model with 10.0.3.1(H192SP2C983) firmware version. No unlocking service is provided yet, but one may expect it for E3372h-320, 8372h-320, and other newer modifications with 10.x.x.x firmware versions.
ValdikSS said:
Added support for e5577s 21.333.63.00.76.
Also, I have successfully unlocked new E3372-320 model with 10.0.3.1(H192SP2C983) firmware version. No unlocking service is provided yet, but one may expect it for E3372h-320, 8372h-320, and other newer modifications with 10.x.x.x firmware versions.
Click to expand...
Click to collapse
Hi, Thank you for your great work. Will it work on E5576 mifi? It has the following:
Hardware version :CL1E5576M05
Software version :10.0.2.1(H690SP1C297)
Web UI version :WEBUI 10.0.2.1(W11SP1C297)
Configuration file version :E5576-606-CUST 10.0.1.1(C297)
Thanks!
some one please help me to unlock huawei E5576-606
MODEL E5576-606
IMEI 863324043812536
S/N YWH7S20618001672
Huawei Router Sim Unlock
Model B68A-24
357480040217054 :IMEI
634028496514779 :IMSI
Can you unlock E5577s?
P.S: used all 10 attempts
ValdikSS said:
Added support for e5577s 21.333.63.00.76.
Also, I have successfully unlocked new E3372-320 model with 10.0.3.1(H192SP2C983) firmware version. No unlocking service is provided yet, but one may expect it for E3372h-320, 8372h-320, and other newer modifications with 10.x.x.x firmware versions.
Click to expand...
Click to collapse
Can you pleas advise, if Airtel and-311ww can be unlocked.
No information is available on internet :-(
help.
I need to do band locking
Thank you
B612s-25d
Firmware version: 11.197.03.00.1472
These Mobinnet modems have efuse with secuboot and I have a spare one. Please DM me if you would like to work on it.
How to unlock Huawei B311s-220.
Can you provide me pin Out
can anyone unlock this device?
MODEL: VIDA M4 LTE ROUTER
IMEI : 357894850214656
SN: M025201204021465
Network: Nigeria Airtel
Have you found a way to unlock it?
Hi. Is it possible somehow to enable SSH for E5576 (or any other similar router). When i try to login then message says "Connection refused". That means the SSH service is enabled on the router.
I have a note10+ t-mobile carrier. I bought it in china and still living here. It works fine, but on android 9, one UI 1.5 SM-N975U, the phone keeps asking me for an update which I did once and blocked my sim card after, so I had to return it. They back for me android 9 . my question is if I want to flash my phone to another carrier, it should also be t-mobile or USA, and can I do it with an open carrier, which I can use with any sim card?
and before flashing, what the most important things, I have to be careful when it comes to firmware or the phone model?
if someone can share with me the link of firmware I can use with the newest android I can install that would be awesome
my CSC is: N975USQS2ASJ8
service provider SW ver
SAMOC_SM-N975U_OYN_TMB_PP_0008
TMB/TMB/XAA