Hi All,
The 2 sim card of my Elephone P8000 are alwas in Roaming mode (4GR) ?
The phone is supposed to be fully unlocked. To use LTE/4G i have to allow roaming.
Thank's for your help,
I have same Problem. 2G works, 3G and 4G only with activated Data Roaming. Net is O2 Germany
Gobiwan12 said:
I have same Problem. 2G works, 3G and 4G only with activated Data Roaming. Net is O2 Germany
Click to expand...
Click to collapse
I am on O2 as well and have the same issue. The cause is, that O2 and E-Plus merged their networks using "National Roaming". You can also read on the website of O2 that on some phones you have to enable roaming to make the phone accepting the E-Plus network.
I am currently investigating this issue and try to find a solution with minimal effort and without flashing a custom recovery so you will not loose OTA. Rooting your phone will definitely be required.
Cheers
For me the first sim card is "Virgin Mobile" (use sfr network) and the second sim card is "Free Mobile" and both are in roaming mode in order to have 4G (LTE) functional.
Have a look at this thread: http://forum.xda-developers.com/elephone-p8000/development/mod-remove-roaming-home-network-t3206004
Hi,
I follow this thread, and i have no more roaming in both sim cards
In my case
Sim 1 : Virgin (mcc 208, mnc 23) it use SFR network (mcc 208, mnc 10)
Sim 2: Free (mcc 208, mnc 15) it use orange network (mcc 208, mnc 01)
:good: This is my framework-res.apk it was build for Virgin (FR) and Free (FR) for Rom Stock 07252015. If you use this version of Rom then you can use it on your P8000. If you use another ROM version, you have to build your own framework-res.apk
Related
Thank you in advance for any help and assistance you can provide.
I have a podop 838 pro (which is the att 8525, HTC 100, HERM 100, etc.) which is unlocked. The phone was purchased in singapore and I am using it in greece with an USA ATT 3G Sim Card and a Greek Vodafone 3G Sim Card.
I have upgraded to WM6.0, ROM 3.54, Radio 1.47.00.10 etc.
When I turn the phone on with ATT sim card I get the message 'Your current operator is not supported. You should obtain an update from your vendor.' Then it prompts me 'Would you like to select another network provider' but when click yes it only give me choices like Hong Kong, Singapore, Philippines, Australia etc. (asian countries only).
When I insert the Vodafone 3G sim card I don't get the message but I still can't access internet via 3g.
Long story short does anyone know where I can get an ATT or Vodafone ROM or software update that will allow me to access 3G service via my podop 838 pro.
All the links I have found online are outdated and no longer exist.
When I try to download the update from HTC.com directly it ask for my serial number and then tells me the update is not for my phone.
PLEASE HELP - Any help would be greatly appreciated.
If you could provide valid links for the ROM updates for ATT or Vodafone service providers I would be in your debt and in a generous mood.
That being said, Please advise what donation amount would be necessary to solve this problem once for all.
THANK YOU!!!
Hello,
*
I just bought a Huawei P6 C-00 Dual Sim from China ( not possible to add a SD card but the internal memory is 16 GB).
*
After some tests , I found some issues :
*
1 / As dual sim , there are two slots :
*
- The first for a GSM SIM card : Incoming call \ outgoing OK , but can not connect to internet via GSM network ( problem described in point 2 )
- The second port is for a CDMA SIM card : my sim card does not work and no network is detected ( ? ) . After some web research, I understand that this port is designed to support only a SIM card from China Telecom ( so the port is blocked on China Telecom) .
that this port operates with GSM 2G Network while the CDMA port for 3G Network !
*
==> Question: How can I unlock this CDMA slot in order to connect my sim card and use the 3G network? Is there a way , a software, or a code for the release\ Unlock of this port?
*
2 / Let's return back to the first GSM port that seems to work fine until I start doing the manual configuration of the mobile internet via a new APN (us this mobile is new, it is not possible to configure automatically with my provider).
In fact the boxes corresponding to MCC and MNC are locked ! I can not edit this to put the country code MCC and the operator code MNC . these parameters are locked with MCC = 460 ( China) and MNC = 03 (China Telecom) !
*
==> Question: How do I unlock these boxes to put good values MCC and MNC and able to connect to internet via GSM ? Knowing that the wifi works great !
*
3 / Question: If I can root my phone , is it possible to overcome the above two problems? have the CDMA Unlocked and Port boxes MCC and MNC ?
*
Thank you for your help
CDMA and WCDMA phones use a different radio modules, a mean the different hardware. You can't just unlock it to use WCDMA network.
Sent from my HUAWEI P6-U06 using Tapatalk
alex.79 said:
CDMA and WCDMA phones use a different radio modules, a mean the different hardware. You can't just unlock it to use WCDMA network.
Sent from my HUAWEI P6-U06 using Tapatalk
Click to expand...
Click to collapse
So no solution to use WCDMA ?
And what about the issue of locked MCC & MNC code ? How can i unlock them for modification ?
thanks
seyf.jerbi said:
So no solution to use WCDMA ?
And what about the issue of locked MCC & MNC code ? How can i unlock them for modification ?
thanks
Click to expand...
Click to collapse
Yes, this is GSM/CDMA phone and it can work only with GSM and CDMA networks.
Is it too late?
First of all, I am not an android mobile technician.
I am also learning how to tweak android phones by studying from this and that forums.
In our country, Myanmar, we use mostly Huawei handsets and especially CDMA ones.
Secondly, I hope you haven't thrown away that P6 C00.
I think it might be possible to overcome some of the obstacles you are currently facing:
Q3:Unlocking China Telecom lock and MCC and MNC editing
Q1 & Q2 shall be answered once we can solve Q3.
Thirdly but most importantly, you are going to be needed to have to unlock the bootloader and root access both of which are not really difficult.
There are a lot of Myanmar/other forums giving tutorials on this and I think P6 C00 is likely to be rootable and its bootloader unlockable.
Going back to Q3nce you got root access, you just need Buildprop editor installed from Playstore.
Then run it. Create a backup first. Then Edit and scroll down until you see ro.cdma.home.operator.numeric=46003 and change it to your mobile operators MCC and MNC. Save and Reboot. And go back into your APN settings. You will see that the MCC and MNC were changed and also editable.
I was frustrated for this for like a month and I just find out accidentally.
Of course, you should have a backup of your firmware, recovery and various other tools ready.
I think I should warn you that following my advice might brick your phone and if you do follow, it's at your own risk. Don't blame me.
Good luck Buddy.
If my advice were wrong somehow, I hope some other admin or technician would please kindly correct me. But I just got it working that way.
Hi everyone!
I have a D852G with vidéotron (a carrier here in canada) but I can't connect to vidéotron network!
Instead, I'm connected to rogers (another carrier) and I can't get LTE to work, I only have 2G, 3G and 4G
My apn is setup and I flashed my device lollipop modem
I am running Cloudy g3 2.5
Any help is highly appreciated!
Did you use these APN settings?...
Name: Videotron mobile
APN for a 4G SIM card and device: media.videotron
APN for an LTE SIM card and device: media.ng
MMSC: http://media.videotron.com
MCC : 302
MNC : 500
APN Type: default,mms,supl
Leave all other fields empty.
Click to expand...
Click to collapse
redduc900 said:
Did you use these APN settings?...
Click to expand...
Click to collapse
Yes, I used these
Assuming you're using a Videotron LTE compatible SIM card, you may need to contact them and have your phone re-provisioned.
redduc900 said:
Assuming you're using a Videotron LTE compatible SIM card, you may need to contact them and have your phone re-provisioned.
Click to expand...
Click to collapse
On stock rom it work, so its not a hardware problem. I wont contact them to help me to setup the custom rom..
Please check both images
1st - RomBuzz
just getting signal of both inserted sims
(Showing Just 2 networks availabile )
Vodafone and Airtel
Vodafone Haryana - Always in Roaming
Airtel Punjab - Always On Home Network
2nd Pic - JB stock Rom
check The All Available Network At My Place
Please Solve It
it is The Smoothest Rom Ever i Tried
But i cant Use it Due To This Network Issue
Please Solve it prnjl
#Sorry For My handicapped English
Hello, this is my first post, so sorry for the mistakes and for my english (I speak Spanish from Cuba). Well... I have a Samsung Galaxy S6 SM-G920P (Sprint) and here in Cuba there is UMTS with HSDPA, but not LTE. When i put my SIM Card to connect to my Data Network, the system show me this error "LTE: ESM - 33 EMM - X". It seems an LTE error, but in the Network Configuration i used only GSM/UMTS Networks, so why show me an LTE error??
Then i was erased all my phone, installed LineageOS 15 (but in baseband say Unknown so not detect my SIM), I was used the Stock ROM, not solution....
I don't think the g920p has lineageos support