G1 boot loop - Upgrading, Modifying and Unlocking

Alright, I've been following a guide to root my G1 (won't let me post the link because I'm a new user...), and I didn't back up the files that were on the SD card. the guide says to format the microSD card to FAT-32, which it already was, so I decided to skip that step and I left the files that were already there on the card. next I downloaded the dreaimg.nbh file and immediately copied it to the microSD card. what I didn't realize was that the file wasn't finished downloading when I copied it to the microSD card, so that's probably what is ****ing up my phone right now. I tried to flash the image and that obviously failed, so I did what the guide told me to and re-formatted the card and re-downloaded the dreaimg.nbh file (completely this time).
Now whenever I try to flash the image from the microSD card the phone says it cannot find an image and goes back to the home screen. I can't boot up the phone normally now, and I've tried restoring the phone to factory settings with no luck. how do I fix this and root the phone properly? thanks in advance.

to be more specific, it's stuck on the bootloader screen

can nobody help...?

Related

Issues Flashing from Storage Card

Hey everyone,
I'm not new to flashing my Hermes. I'm just having an issue I've never ran into and can't figure out. I would appreciate some assistance.
The strangest thing is happening to me while attempting to flash from my storage card. I put the phone in bootloader mode and it takes (IPL-1.04 / SPL-2.10.olipro). Then on the bottom Serial shows and it never goes to the next step and ask me do I want to flash the new image.
I put the att original on the 2gb storage card over and over and over and renamed it HERMIMG.nbh over and over and over and just am flabbergasted. The phone is not bricked, it just refuses to flash again.
Does anyone here have any solutions or suggestions?
PS - I have formatted the card to fat32 and I have checked it for errors. The HERMIMG.nbh file is on the root of the storage card.
Admin please delete this thread.

Flashing via SD card assistance

I've got a Tilt 2 with hard spl and can flash from my desktop no problem. I'd like to get the flashing via SD card going, but it's hanging.
I've got the nbh file copied to the root of my SD card, get the phone into bootloader, but I see a message flash up about no image. It's very quick though and then the phone hangs in the bootloader. A soft reset fixes it and the phone boots up.
I'm clearly missing something and can't figure out for the life of me what it is.
The image file is named correctly. It was copied to the phone through WMDC to the SD card. Should I put the phone into disk mode a copy the image over?
The SD card is formated in Fat 32.
Any thoughts/Advise?
Thanks.
maybe..
i had this issue before - check your .nbh file with total commander, or put it in your pc and check it. if you name it .nbh with the wm file explorer, it actually ends up RHODIMG.nbh.nbh - solution is just to remove one .nbh!
:::Whimper:::
I'm having this exact same problem!
My RHODIMG file is named correctly and in the root directory (there is nothing else on the SD card either), but I get that same EXTREMELY BRIEF message about no IMG file and then it hangs at the bootloader screen with 'Serial' in the white box on the bottom.
I've even tried using Mobile Flasher, but nothing is working. I
What am I missing??? I've tried it many times already, formatted my card a few times and loaded the RHODIMG file again, but nothing! My Rhodium will NOT connect via USB anymore, so I need to flash via SD card.
Help!
Debbie
I actually don't even rename the file, it's already got that name from the rom. It's e2 manilla 2.5 rom.
I'll try and transfer the file to the card when the phone in disk mode and see if that makes a difference...
O-M-G(!), this is *so* freakin' wacky!!!
I just switched SD cards to one that was larger (8GB rather than the 2GB), that had tons of stuff on it, then copied the RHODIMG file in the root, and then ran 'enablerapinew.cab' again, just for the hell of it...
Damned device found the RHODIMG file there from the bootloader and the update ran as expected, but not on the 2GB card with nothing else on it! WTH?!
Device says that the update is complete, so I'm booting up now and will do a few resets and then perform the tedious task of setting up my Tilt 2, etc.
Don't know whether the cab (thought I only had to run this once when Hard SPLing?) or the different card was what caused it to work, but I hope this helps someone else with the same problem. Whew!
Debbie
...Who's back in business!
SOLVED!
I don't know what caused the magic, but I was able to flash from SD card... FINALLY!
Here's what I did: Flashing Via SD Card Assistance
Hope this helps others!
Debbie
No, this did not work for me. I tried installing the cab again, but no luck, just passes on by saying no image.
Delete image off sd card, reformat FAT32 and copy image back on... I have had this problem myself, it seems that when the .nbh file copies it doesn't register on the card properly or something. Either deleting the file then re-copying seems to work but I still like to reformat too..... DON'T just copy over the top of the image file... THIS DOESN'T WORK... leads to a lot of hair pulling frustration...
Cheers...
So I tried a reformat of the card, just a quick one, not full. Still didn't work. I downloaded another image to try out, the lastest Energy rom, to flash on a completely blank card. That didn't work.
So, I went and got an older card, 8 gig, that is currently being used in a camera. The one I use now is a 16 gig card. This one worked fine.
Conclusions being perhaps a 16 gig card won't work for flashing?
brands
i have heard of certain brands having sizes that didn't work for flashing, for whatever reason. It was a long time ago on my kaiser, so i don't remember which it was, but kingston 2gb comes to mind. like i said, don't know if that is accurate, but there definitely were some that just wouldn't work. perhaps a different brand 16gb?
Well, I used the other memory stick, a Scandisk and this worked fine. Must be something with the 16 gig Kingston disk as it just will not work.

[Q] She is bricked (pls not) HELP!

Hi,
Was running on LeeDroid 1.9, wiped and flashed for OpenDesire 3.4, came up fine then rebooted for the 3.4.2 patch and now my Desire just will not go past the HTC logo screen no matter what I do.
I can boot into recovery and have full access to everything, tried formatting the SD card and loading different ROMS but stuck @ the HTC green logo on white background.
Even Revoked3 again but the prob is not getting into the Recovery menu, its getting past that HTC screen.
Any info / idea's / help?
Thanks
Russ
If your phone turns on its not bricked, there will be a way to fix any issues your having, its just finding the correct one.
When flashing other roms did you wipe everything?
Data
Dalvik Cache
Ext parititon (if you have one)
Not wiping Dalvik is the number one reason roms get stuck bootlooping on bootscreen1.
Alternatively, it is booting but your not waiting long enough, you can always run adb logcat while booting to see if they phone is actually doing anything.
Hi,
Thank you for replying....
Figured it out that it is the SD card, here is the situation:
- Boot into recovery but cannot mount nor format the SD card
- Can see the SD card in MAC/ Windows and formated it Fat32
- Can boot without SD card
- Can boot with another SD card which is only 128Meg so cannot get LeeDroid back on it to reflash that ROM
I obviously need to format the SD card proper and it looks like I need to use Gparted but that looks like a HUGE Linux ISO download unless you know of a MAC version of it I can use?
Thanks
Found a 2Gig SD Card, got LeeDroid back on it, flashing and hoping I can boot with the original SD card so I can format with ROM manger but thinking it wont boot up with the SD card in regardless of the ROM, lets hope!
if you don't manage to boot it up. find this in the forum "PB99IMG.zip" w/o the quotes. format your sd card and put the archive in root of sd card. after that turn on your phone by pressing volume down and power on/off. wait till phone recognizes the archive and follow onscreen directions. phone should boot normally as unrooted. use unrevoked to root again and flash any rom you want.
post result.
Okay I am up but not on my original SD card, using a spare.
In recovery mode my phone refuses to mount nor format the card but can see it 100%
Seen some posts of a ADB cmd I need to use or is there something else I can try?
Thanks!
I ran "unrevoked" on my phone again and it booted when I had that problem.
But I took out the sd card when I did that. Not sure if it helps. But who knows.
Tried that, booting without the card is fine, with the card in is the issue, phone cannot see it.

Stuck at Splash screen after failed SD card

My dinc is set up like this:
9.01 radio
.92 bootloader
I flashed a rom and then it said my sd card went bad. Tried flashing another rom and it problem persisted. As a last resort i tried to reformat my sd card with no luck. got an error. I then tried to flash through recovery and did a full wipe (my mistake for doing this) but cant flash another rom since the sd card it bad. When i restart it gets stuck at the splash screen.
I bought another sd card and placed a rom which i know works on it and it seemed to have installed fine, but now when i restart i get stuck at the splash screen like i did before.
Any ideas?
Maybe i need to find the original update.zip file from when i first rooted? My sd card is empty except for that rom i put on it.
I found it. Nope, didnt work. Maybe i need to flash a recovery, though i have none anymore.
In case someone else comes across the same problem, i fixed it.
The sd card was ruined. unable to reformat or anything. Luckily i back up my sd card recently so i transfered everything to my new sd card. Went into recover and did a recovery of an old backup.

[Q] Custom Splash Screen [RESOLVED]

I recently rooted my phone via unrevoked3 and unrevokedforever and tried to flash a custom splash screen as instructed by their website under the unrevokedforever info page (I would post the link, but as a new user I cannot :/ )
After placing the .zip on the root of my sd card and booting it in hboot, the phone proceeds to attempt to load the file but continues to say the following:
"Loading... [insert file name here]
No image!"
or
"Loading... [insert file name here]
No image or wrong image!"
I'm at a loss as to why this might continue to happen. I assume its not the location of the file, otherwise the bootloader probably wouldn't have recognized it. I'm simply confused as to why it won't recognize any images.
For further help, I've attatched the .zip I'm attempting to use.
Any help would be greatly appreciated!
Try redownloading the zip and make sure it's named correctly
Edit: typo and thanked you on accident lol
Just gave it a try, and still no luck... really confused at this point. :/
Zoso1392 said:
Just gave it a try, and still no luck... really confused at this point. :/
Click to expand...
Click to collapse
Make sure your SD Card is formatted to FAT32
Ah, that's interesting! Looks like my sd card is coming up as MS-DOS (FAT16).
Now, I know that formatting it would delete all the files on the card, but if I copy them onto my computer, reformat the drive, and then put everything back exactly the way it was, would that have any effect on my phone whatsoever?
Nope I do it all the time. Just put the on the comp somewhere format then put them back... Just dont boot the phone in between... Then things may get wonky
Just formatted the sd card with no issues, time to see if it will actually let me use a new splash screen... will update once I run hboot.
[UPDATE: Great success! I guess the sd card simply had to be reformatted to put in a new splash screen. Thanks everyone!]

Categories

Resources