I've got a Tilt 2 with hard spl and can flash from my desktop no problem. I'd like to get the flashing via SD card going, but it's hanging.
I've got the nbh file copied to the root of my SD card, get the phone into bootloader, but I see a message flash up about no image. It's very quick though and then the phone hangs in the bootloader. A soft reset fixes it and the phone boots up.
I'm clearly missing something and can't figure out for the life of me what it is.
The image file is named correctly. It was copied to the phone through WMDC to the SD card. Should I put the phone into disk mode a copy the image over?
The SD card is formated in Fat 32.
Any thoughts/Advise?
Thanks.
maybe..
i had this issue before - check your .nbh file with total commander, or put it in your pc and check it. if you name it .nbh with the wm file explorer, it actually ends up RHODIMG.nbh.nbh - solution is just to remove one .nbh!
:::Whimper:::
I'm having this exact same problem!
My RHODIMG file is named correctly and in the root directory (there is nothing else on the SD card either), but I get that same EXTREMELY BRIEF message about no IMG file and then it hangs at the bootloader screen with 'Serial' in the white box on the bottom.
I've even tried using Mobile Flasher, but nothing is working. I
What am I missing??? I've tried it many times already, formatted my card a few times and loaded the RHODIMG file again, but nothing! My Rhodium will NOT connect via USB anymore, so I need to flash via SD card.
Help!
Debbie
I actually don't even rename the file, it's already got that name from the rom. It's e2 manilla 2.5 rom.
I'll try and transfer the file to the card when the phone in disk mode and see if that makes a difference...
O-M-G(!), this is *so* freakin' wacky!!!
I just switched SD cards to one that was larger (8GB rather than the 2GB), that had tons of stuff on it, then copied the RHODIMG file in the root, and then ran 'enablerapinew.cab' again, just for the hell of it...
Damned device found the RHODIMG file there from the bootloader and the update ran as expected, but not on the 2GB card with nothing else on it! WTH?!
Device says that the update is complete, so I'm booting up now and will do a few resets and then perform the tedious task of setting up my Tilt 2, etc.
Don't know whether the cab (thought I only had to run this once when Hard SPLing?) or the different card was what caused it to work, but I hope this helps someone else with the same problem. Whew!
Debbie
...Who's back in business!
SOLVED!
I don't know what caused the magic, but I was able to flash from SD card... FINALLY!
Here's what I did: Flashing Via SD Card Assistance
Hope this helps others!
Debbie
No, this did not work for me. I tried installing the cab again, but no luck, just passes on by saying no image.
Delete image off sd card, reformat FAT32 and copy image back on... I have had this problem myself, it seems that when the .nbh file copies it doesn't register on the card properly or something. Either deleting the file then re-copying seems to work but I still like to reformat too..... DON'T just copy over the top of the image file... THIS DOESN'T WORK... leads to a lot of hair pulling frustration...
Cheers...
So I tried a reformat of the card, just a quick one, not full. Still didn't work. I downloaded another image to try out, the lastest Energy rom, to flash on a completely blank card. That didn't work.
So, I went and got an older card, 8 gig, that is currently being used in a camera. The one I use now is a 16 gig card. This one worked fine.
Conclusions being perhaps a 16 gig card won't work for flashing?
brands
i have heard of certain brands having sizes that didn't work for flashing, for whatever reason. It was a long time ago on my kaiser, so i don't remember which it was, but kingston 2gb comes to mind. like i said, don't know if that is accurate, but there definitely were some that just wouldn't work. perhaps a different brand 16gb?
Well, I used the other memory stick, a Scandisk and this worked fine. Must be something with the 16 gig Kingston disk as it just will not work.
Related
So I plug my 16 gig in to format it and poof. Never even recognized it. Now nothing recognizes it, namely my previous phone.
Any way to salvage it? I tried to plug it into the pc directly but no dice. Possible that the converter card was not sdhc compatible.
Suggestions?
The card is not recognized when you plug it into the PC? Methinks it's a bunk card instead of the phone borking it.
maybe, but it was a bit too coincidental being as I have been using the card since november.
When I had that problem, I went and got the thing formatted by a digital camera and it came back to life.
It's worth trying if you have one handy at least.
GPARTED is the answer to all your formatting needs... Seriously, download it, throw it in your computer, and restart. Should boot into it.
Thanks for the great feedback. I'll let y'all know how it goes when I get back to my comp.
you might of formated it as ext instead of fat
One trick is to format the card in a camera, then back to your phone.
Also, what brand card is it? Transcend has an auto-format utility that may fix your card. Also Transcend has a lifetime warranty for flash type cards and will replace your card with a new one, you just need to start an RMA on their website and mail it in.
Installed Fresh 0.2 and was FC like mad, then finally no sd card. I then ran RUU to back to stock with no problems. Started to use mybackup and would not work. The phone reported a blank sd card, formatting failed to report any actions, not sure about this but thought something would display ie progress. Removed it and put it in my Windows7 64bit desktop and nothing, showed disk but not formatted. Put it in my Windows7 32bit Netbook and all was good. Back into phone and Astro showed everything was there, I am at a loss here but something is going on with these SD cards or the rom! Weird business this is!
download the SD Format tool?
http://www.sdcard.org/consumers/formatter/
Retiredfinally said:
Installed Fresh 0.2 and was FC like mad, then finally no sd card. I then ran RUU to back to stock with no problems. Started to use mybackup and would not work. The phone reported a blank sd card, formatting failed to report any actions, not sure about this but thought something would display ie progress. Removed it and put it in my Windows7 64bit desktop and nothing, showed disk but not formatted. Put it in my Windows7 32bit Netbook and all was good. Back into phone and Astro showed everything was there, I am at a loss here but something is going on with these SD cards or the rom! Weird business this is!
Click to expand...
Click to collapse
Was this the 8GB card that came with your Evo?
It was the one that came with it. I gave my son the Hero with an 8gig thinking I was good. It is a Scandisk so figured it was ok, same as Hero anyway. I tried the SD formatter, older version I see so thanks for that update. Just weird that nothing worked until I put it in the Netbook with 32bit 7.
This is my first post, and I'm usually pretty careful about following instructions. I'm currently running Skyraider's 3.0 RC2, but to my dismay, I am finding that my phone still refuses to recognize my SD Card. Under settings it says it is unavailable, and when connected to PC, it gives an option to mount to disk but doesn't mount upon selecting this.
My phone is rooted with S-Off and 2.15 radio...Did a full wipe of everything before I flashed 3.0 RC2. Shows that my kernel is now King #2, but I have had this issue with many other roms and kernel combinations. I have been unsuccessful in finding a solution when searching the forums, and the only way to regain functionality is to restore a previous backup without any roms installed.
Any help is much appreciate. Thanks!!!
P.S. I've also tried mounting the card in clockworkmod's advanced recovery settings, but this does not change a thing. Internal storage is also currently unavailable. Mount through usb in recovery does work, but this doesn't help when I cannot access my sd card after boot.
I had a similar issue a couple days ago after upgrading from stock 2.1 to SkyRaider 2.5.2.
When I'd go to set my ringtones, the option for the SD card wasn't there. As if it wasn't reading it was in the phone at all. I opened up Astro file manager to see if it could read it and it in fact did. I could see that all the ringtones were still on the card right where they should be and they would play from Astro when I clicked on them. But, the option to actually set them still wasn't there.
I'm not exactly sure what 'fixed' it, but I went in to set my notification tone and suddenly the option to select from the SD card was there. Then, I could then access the card to set ringers as well. I'm sorry I don't have anything more specific. The card just seemed to suddenly decide to let the OS know it was there. I also rebooted the phone a couple times as well as removing the card while the phone was in use and reinserting it. Not sure if any of that helped the situation or not.
I had asked about this in two separate threads and not one person responded, so I'm guessing the issue is rare.
If you don't get anywhere with it, maybe try a different SD card just to see if it shows up.
Good luck.
I've had the same issue but was able to resolve it. Mount the sd card from a laptop or PC. If you can read the card copy the contents onto the PC (I placed mine in a separate folder). Then go into tools and do an error checking. After replacing the SD card back in the phone see if everything is ok. this fixed my SD card. However, I've had the SD card lose its primary disk notation so I had to reformat and then transfer the previous save files on the SD card from my backup an that solved my other issue. Also, some times the SD card speed can cause this issue and it is perfered that you a class 4 or better. I hope this helps.
Well, I took your advice and pulled the sd card only to mount it separately and scan it for errors. None were found. I've also reformatted and restored all the files that were on it. Phone still does not recognize card or internal storage. My phone did, however, recognize another card I had on hand and I believe it may be a compatibility issue between my 8 Gb A-Data brand Micro SD card and 2.2 roms. FYI...It's a class 6, and the one I tried that was recognized was a 6gb sandisk (class 4). I'll look into getting a 16 or 32 gig sandisk in the near future and keep you posted. Thank you guys for your insight.
always 'safely remove hardware' (stop the device, etc.) from your windows machine before unplugging your incredible
if you don't, you end up not being able to see the SD card until you restart your phone
Just reformatted my SD card, checked for errors after unmounting etc... and now it seems to work ok, although one of the music players I normally use doesn't seem to recognise it!!
I was wondering if another Desire user could help me out. I had a bit of a problem with my phone and had to switch it off and remove my micro sd card, but when I plugged it into my computer with an adapter there was no useful information on it for me to get back. This either means that this is standard and the micro sd card can only be read properly when the sd card is in the Desire and then plugged in. Or that my sd card has an error.
Could someone please help with this and let me know what files they can see when they put their micro sd card into their computer directly.
The picture is what I see.
Run Checkdisk (chkdsk) then file restoring software, to recover your files.
Then Re-format the card. Happened to me once, everything got meesed up. Re-format helped.
nagypapi said:
Run Checkdisk (chkdsk) or other file restoring software, to recover your files.
Then Re-format the card. Happened to me once, everything got meesed up. Re-format helped.
Click to expand...
Click to collapse
Checkdisk isnt a recovery software, but I ran it already, and I tried the recovery program but I cant seem to be recovering anything but more useless information, I dont know if the data is lost or if its still on the card but only readable through the desire itself.
Can someone please do what I said in my original post and let me know what they can see with just the micro sd card in the computer
Thanks
CHKDSK is scans for harddrive damage and it DOES recover the files, but with the .chk extension.
These are the files on my SD:
Uploaded with ImageShack.us
If thats the case then thanks for letting me know.
I ran chkdsk like this.
Plugged in the micro sd card in the computer, went to my computer and right clicked the SD card, clicked properties, went to tools and then error checking.
Selected both the check for system errors and scan for bad sectors. Started it and 2 seconds later it closes and doesnt actually do anything taht I can see. I go back to the sd card and still nothing has changed.
Where should it be putting the recovered .chk files?
Cant wond scan via windows, so i did it by cmd. Said it couldnt convert threads as there is no room. So I'm guessing I have to format it first. I hope this doesnt get rid of my files permanently, I didnt have any other copies of my contacts or anything, and phone is completely broken.
I just bought a 16gb class 10 sd card. Now I am using the one that came with the phone. I thought I can copy and paste the files on the 8gig card to the 16 gig card and should be all set. I copied all files to the new card and the phone doesnt want to boot up. I believe to have a ext on the card that i am using now but I dont know if that matters. If I do have an ext or partition on the card, how can I find out? Any suggestions?? Thanks..
Format the new card, put it in the phone and boot up, then copy everything from the 8 gig
thank you...I will try that..
Let the PHONE format the card. then pull the card and copy only the selected needed files. nothing more. :-D but yeah. a class 10 card IS WHAT SHOULD have been installed in our phones. our phone doesn't support the max speed. but it is truely faster even when connected to the USB port. I tested before and after and did see a difference in speed. But for the normal use, it won't help. lol
its worked....Thank you
"...then pull the card and copy only the selected needed files. nothing more."
Could you (or anyone knowledgeable) elaborate on what the "needed files" are, please? I'm asking because my SD card just recently crapped out on me. Entirely. Crapped. Out. I couldn't even get my pc to pick it up w/ an adapter. However, the good news is that I recently did a nandroid backup and had copied it, along with all of my pics and vids to my PC.
So, I now have a brand new SD card and a folder on my PC that contains my recent nandroid, a bunch of pics, and some vids, but nothing else. I never bothered moving all of the other files to my PC. In hindsight, I guess I was prepared for a flashing fail, but not for an SD card fail
My question is this: What additional files do I need to move to my sd card to keep operating smoothly, including future rom-flashing and nandroid backups?
Do I need to add a recovery file (Amon RA or CWM) manually? Or can I just re-download CWM from the market and flash alternate recovery? What other important files am I forgetting?
Thanks.
Hey guys and girls!
This morning my phone turned off by itself (13% battery left) and needed somewhat longer than usual to reboot (in the meantime I plugged it back in to the charger). First thing I noticed was that my whole theme got reset as well as it started showing me introductional tips ("long press here to move your apps to the homescreen, ecc.). It also started to update apps in the Play Store even though I set it to manual ... so basically a LOT of things were reset.
The biggest problem I'm having now is though that all my files (pictures, videos, music) that are stored on an external micro SD card are corrupt. It's not possible anymore to open anything. I already removed the micro SD card and put it into an adapter to have a look at the files via the laptop. But nothing, even though the sizes of the files seem OK, I can't open them.
Does anyone have a clue as to what exactly happened here? Are those files lost (at least of some I have a backup) or is there anything I can do to "repair" them? Help is really appreciated, thanks!
PS: Things like the card unmounting and re-mounting never occurred. So I can't tell if the card was dying or if actually the phone ruined my files.
Did you happen to be using a SanDisk SD Card? I've had my 10 brick 2 of those until I switched to Samsung SD Cards about a year ago and haven't had issues since.
I never could manage to recover files from the damaged SD cards.
I have a Samsung SD card and had something similar.
I guess I was on Viper Rom and basically my phone restarted around 15-20% of battery. After a long wait for booting back again, all my settings were gone.
Files and others in the SD card was okay but basically until I formatted the card, I wasn't able to boot into the Download Mode to install a new rom...
I fixed the restart issue by installing the official HTC Rom.
Thanks for your replies.
It is indeed a SanDisk 16GB card. It seems though that the card is still working (no problems accessing it via phone or laptop), just the files appear to be broken. In the meantime I also tried apps like PC Inspector File Recovery, but to no success
I'm still on stock HTC Sense by the way, no root, nothing.
Anyone know though why that happened (resetting everything, etc.)?
Hit me with a PM I'll give you a SanDisk restore tool which works quite ok. there is a huge chance some files can be recovered, some will be damaged though. Don't push any new files on the card after you tried to restore the files
HTC 10-Corrupted microSD card
I know this is an older thread, but I was wondering if there is a solution. I have an HTC 10 which has an micro SD card in it, that is "married" to the phone. When connected to a computer, the computer recognizes the phone, and the microSD card, and begins to load the folders/files. Eventually this process stalls, and the phone/drive is no longer readable by the computer. To get the computer to recognize the phone/card again, I need to restart the phone, but the same thing happens again.
I have like 20gigs of data on the card, and cannot just put the card in a reader, because it's encrypted to the phone. Any possible solutions? It's frustrating to see the files/pictures for a minute or two, and then have them disappear. I have tried copying/pasting the files while they're visible, but this often triggers the computer to no longer recognize the phone/memory card. I've tried to un-encrypt the microSD card, but the phone can't recognize/access the microSD card long enough to complete that process.
Please help if you can.
Glenn