Related
The problem is that...
when i click START - SYSTEM - SCREEN - ALIGN SCREEN...
it freezes when it shows the first 'star' where you have to align. (the star at the centre of the screen when you press align screen)
Is there a fix or patch on this?
It's happening on most ROMs i put on my SPV M3100...
apart from the official rom (which is boring compared to other cooked roms).
Thanks
Are you using Roms with FTouchflo in it?
gerald_s said:
Are you using Roms with FTouchflo in it?
Click to expand...
Click to collapse
Yeah, I experienced the same thing with FTouchflo installed.
the answer is here:
http://forum.xda-developers.com/showpost.php?p=1745832&postcount=93
gerald_s said:
Are you using Roms with FTouchflo in it?
Click to expand...
Click to collapse
No... :S ive not got ftouchflo installed.
Can you please give more details about your device? Bootloader, ROM name (the one you are using now)... It will help troubleshoot your problem.
i assume it works when you first have to allign it, after a flash...
am i right?
if yes then it probably has to do smth. with the programs in your extended rom that get installed on the first boot
softonic123 said:
i assume it works when you first have to allign it, after a flash...
am i right?
if yes then it probably has to do smth. with the programs in your extended rom that get installed on the first boot
Click to expand...
Click to collapse
Yes I think you are right because with I can a align the screen infinite times with the original WM6 Hermes ROM... but with any other ROM e.g. Shwaps or TNT or Black ROM I can only align it once... just after putting the ROM on. But i know for sure its not FTouchFlo as I do not have that installed.
KarhU said:
Can you please give more details about your device? Bootloader, ROM name (the one you are using now)... It will help troubleshoot your problem.
Click to expand...
Click to collapse
I am using the WM6 Hermes Official ROM
only becuase thats the only ROM i can re-align my device when it goes out of alignment...
tabla said:
I am using the WM6 Hermes Official ROM
only becuase thats the only ROM i can re-align my device when it goes out of alignment...
Click to expand...
Click to collapse
Later Schap's ROMs (4.20 and 4.22) and some other cooked ROMs contain FTouchFlo, FTouchFlo is also contained in various Touch Cubes installations for Hermes - even commercial Touch Commander contains it. Be sure not to have any of these installed. That might be the culprit. The behavior you describe seems to be FTouchFlo - after you click the first star, the screen does not react, but the buttons work, functionality of screen returns after a soft reset. It can also be a different problem, but we need to single FTouchFlo out completely before digging deeper.
KarhU said:
Later Schap's ROMs (4.20 and 4.22) and some other cooked ROMs contain FTouchFlo, FTouchFlo is also contained in various Touch Cubes installations for Hermes - even commercial Touch Commander contains it. Be sure not to have any of these installed. That might be the culprit. The behavior you describe seems to be FTouchFlo - after you click the first star, the screen does not react, but the buttons work, functionality of screen returns after a soft reset. It can also be a different problem, but we need to single FTouchFlo out completely before digging deeper.
Click to expand...
Click to collapse
yes I am 100% sure anything with touchflo is not installed
e.g. the cube.. touch flo... etc
And yes it is exactly how u desribed about ... if you soft reset if just returns to the today screen. its just my SPV m3100 keeps on moving out of alignment... i tried to follow the instructions on some forums to get the screen alignment to stop but i dont seem to get them...
but anyway... thanks
use file explorer to go to \Windows\Startup. Rename this to \Windows\Startup-off and create a new folder Startup (now empty)
Restart.
Use align screen without problems, reverse what you did with the Startup programs.
I will bet you this works for you. One of those programs that start automatically (But do not show up in the task manager) stops your align screen from work.
disable touchflow
I've had the same problems with the screen allignment.
After disabling touch flow the problem was gone
I bought a S620 on Ebay and it arrived yesterday with some info still on it and I want to reset the phone.
I have read the online user guide and it says to go into 'Expert' and there should be a 'Clear Storage' icon, that icon is missing. Is there a hidden security measure that will bring that icon back.
Is there any other way to clear all the storage, I am very new to this phone so its all a bit new to me and I hope someone can help.
Thanks for your time in advance
you need to check if rom version is original or no,i think that have to be wm6.0, if you flash you s620 with kavana-ricky rom version wm6.1, that you can find in this forum with all instruccion you will clean all your s620(excalibur)
good luck
ps. when i coming to this site i had to read a lot, but you will find a lot of people that will help you and other that no it is normal in this site, go ahead
martyn20 said:
I bought a S620 on Ebay and it arrived yesterday with some info still on it and I want to reset the phone.
I have read the online user guide and it says to go into 'Expert' and there should be a 'Clear Storage' icon, that icon is missing. Is there a hidden security measure that will bring that icon back.
Is there any other way to clear all the storage, I am very new to this phone so its all a bit new to me and I hope someone can help.
Thanks for your time in advance
Click to expand...
Click to collapse
Yes. It's called a "hard reset". Do a search on Google or in the forum search.
Hello
Go to:
Accessories - Clear Storage - note 1234 - yes
And you will get what you whant
By
Rsmile said:
Hello
Go to:
Accessories - Clear Storage - note 1234 - yes
And you will get what you whant
By
Click to expand...
Click to collapse
It does not seem to have an accessories icon either so that form of hard reset is not possible either, I think it was set up to a certain corporate program and I can't seem to get it back to normal
satru said:
you need to check if rom version is original or no,i think that have to be wm6.0, if you flash you s620 with kavana-ricky rom version wm6.1, that you can find in this forum with all instruccion you will clean all your s620(excalibur)
good luck
ps. when i coming to this site i had to read a lot, but you will find a lot of people that will help you and other that no
Click to expand...
Click to collapse
My ROM version says it's 3.58.424.2, OS 5.1.342
In about say windows mobile6.0 standard?
martyn20 said:
My ROM version says it's 3.58.424.2, OS 5.1.342
Click to expand...
Click to collapse
if you want to hard reset it, just press and hold left and right soft key then press power button for 2 seconds, still holding the soft key white screen will appear then press the call or green button.
cire6 said:
if you want to hard reset it, just press and hold left and right soft key then press power button for 2 seconds, still holding the soft key white screen will appear then press the call or green button.
Click to expand...
Click to collapse
Thanks, that just what I needed, now I just have to get the sim unlocked and its go, go , go
I did download and run
1.09.25.23 rilphone.cab
without knowing what I was doing, and now my Diamond is stuck in Airplane mode.
What do I need to do to 'undo' the operation?
Any help gratefully received
Thanks
try to do an Hard Reset
nikoan89 said:
try to do an Hard Reset
Click to expand...
Click to collapse
I was hoping on something less dramatic, like downloading the old dll somewhere and updating the registry with the registry editor.
what is basically happening?? in comm manager, phone mode is disabled??(greyed out)??
donsalari said:
what is basically happening?? in comm manager, phone mode is disabled??(greyed out)??
Click to expand...
Click to collapse
Phone is off.
In comm manager Phone is enabled.
If I try to set phone on, it makes me wait a few seconds, but when it comes back the phone is still off.
have you tried uninstalling the rilphone via remove programs, baring that you could upgrade the Radio ROM to one of the many found in the associated threads, and finally as a last resort - a hard reset
rgds
jmz
just delete the rilphone.dll in your windows folder.
After that the original rilphone is used
diboze said:
just delete the rilphone.dll in your windows folder.
After that the original rilphone is used
Click to expand...
Click to collapse
That did the trick!
Thank you very much!
sorry for the late reply, but now your problem is solved!
Ok, so I am a Newb, but I am a start guy... 153 IQ, was always top of my class - however I have no F**ng clue what the guys in the development and hacking section are talking about.
Basically, I have a TP2 for Tmobile that I would like to do something with... ANYTHING~! Preferable install a cooked WM6.5 rom, or a 6.1 rom with Manilla 2.5 for the time being. An android or Sense UI port would be nice as well.
Can someone please either help me get started by pointing my in the correct direction of a helpful sticky, because frankly its tough searching through threads like this:
"[JUL 13][APP][ALPHA4] Nitrogen 1.1 (music player for Windows Mobile)"
Any help would be appreciated by me, and other not so technically inclined individuals.
Thanks a ton!
http://thewingster.com/default.aspx they have a pic guide on how to install a cooked rom and also provide you with the rom
lilchip85 said:
http://thewingster.com/default.aspx they have a pic guide on how to install a cooked rom and also provide you with the rom
Click to expand...
Click to collapse
Guys like you Rock!
llllllllll said:
Guys like you Rock!
Click to expand...
Click to collapse
lol thanks. also click on my sig for softwares. it's always being updated with new apps that you might like for your tp2
lilchip85 said:
lol thanks. also click on my sig for softwares. it's always being updated with new apps that you might like for your tp2
Click to expand...
Click to collapse
Thanks, I checked out the ROM u use and it looks smooth, but I want Manilla
http://forum.xda-developers.com/showthread.php?t=560320
Im trying to mess with this one here. The .exe install sounds simple - but any pointers to doing this?
Also, I dont sync my contacts with Outlook - is there a preferred way to back them up otherwise?
llllllllll said:
Ok, so I am a Newb, but I am a start guy... 153 IQ, was always top of my class - however I have no F**ng clue what the guys in the development and hacking section are talking about.
Basically, I have a TP2 for Tmobile that I would like to do something with... ANYTHING~! Preferable install a cooked WM6.5 rom, or a 6.1 rom with Manilla 2.5 for the time being. An android or Sense UI port would be nice as well.
Can someone please either help me get started by pointing my in the correct direction of a helpful sticky, because frankly its tough searching through threads like this:
"[JUL 13][APP][ALPHA4] Nitrogen 1.1 (music player for Windows Mobile)"
Any help would be appreciated by me, and other not so technically inclined individuals.
Thanks a ton!
Click to expand...
Click to collapse
Welcome to forums
This is the official XDA how to flash for noobs:
http://forum.xda-developers.com/showthread.php?t=550540
Read, Search, Respect and Enjoy!
Good luck,
Will the Tom Rhodium Manilla -> http://forum.xda-developers.com/showthread.php?t=560320 Work in landscape mode?
llllllllll said:
Will the Tom Rhodium Manilla -> http://forum.xda-developers.com/showthread.php?t=560320 Work in landscape mode?
Click to expand...
Click to collapse
i don't think it will but it won't hurt to test it out. i hate not having landscape but i seem to be getting used to it.
hmm.. I think the energy rom should... ill give it a shot, worst case, i can just reflash to stock 6.1 right?
Im stuck at this part LOL
http://thewingster.com/howtohspltp2.aspx
Cant install active sync on vista
I tried running the hardspl, but it completed in 10 sec and all it did was restrart my phone
It´s better to try the Wiki instructions as they are backed up by a lot of members
Activesync is for XP computers only!!
For Vista or S7ven use Windows Mobile Device center
llllllllll said:
Im stuck at this part LOL
http://thewingster.com/howtohspltp2.aspx
Cant install active sync on vista
I tried running the hardspl, but it completed in 10 sec and all it did was restrart my phone
Click to expand...
Click to collapse
i had the windows mobile device center running and it said my phone was connected. plug in the usb and put active sync on the device and the wmd will show your phone is connected. i was confused also since it said active sync failed.
as for the hardspl
*Go into BootLoader Mode (do a Soft Reset while holding the "volume down" key on the left side of the device. Keep holding the "volume down" key until you see tricolour screen which is the bootloader mode, then release it) and verify the screen shows 0.85.OliNex, which is the HardSPL version*
orb3000 said:
It´s better to try the Wiki instructions as they are backed up by a lot of members
Activesync is for XP computers only!!
For Vista or S7ven use Windows Mobile Device center
Click to expand...
Click to collapse
what he said
lilchip85 said:
i
as for the hardspl
*Go into BootLoader Mode (do a Soft Reset while holding the "volume down" key on the left side of the device. Keep holding the "volume down" key until you see tricolour screen which is the bootloader mode, then release it) and verify the screen shows 0.85.OliNex, which is the HardSPL version*
Click to expand...
Click to collapse
How exactly do I do a soft reset? What else do I hold down aside from the volume down key?
llllllllll said:
How exactly do I do a soft reset? What else do I hold down aside from the volume down key?
Click to expand...
Click to collapse
(if you have tmobile it's the lil circular slot on the right) just power off your device when you turn it on just hold the volume down
I did that and its already showing SPL - ).85.01 olinex
I didnt think the process worked as it said it takes 10 min, and it took about 6 seconds.
Is this all i needed to do and can i start the rom flash now?
llllllllll said:
I did that and its already showing SPL - ).85.01 olinex
I didnt think the process worked as it said it takes 10 min, and it took about 6 seconds.
Is this all i needed to do and can i start the rom flash now?
Click to expand...
Click to collapse
it says 10 mins but it doesn't take that long. now you can flash away. i've flashed my phone like 3 times and ended with the touch it rom. i never tried tom codon rom. if you do try and landscape works let me know!
also you only need to hardspl once. so if you get tired of the rom just plug it in. run the customruu.exe and flash the new rom but ofcourse follow the instructions on the site lol
I just installed the EVO 6.5 ROM, and every time I hit the center button it launches the celetask application. This needs to be fixed in my phone for it to be usable. Any ideas how to fix it? I believe the eT9 file is in the ROM files when installed. The D-pad works; up, dn, left, and right, but when you press it it launches the celetask program? Very annoying!
I posted this thread in the EVO thread posts, not sure how to delete it out of there, because I don't think it has anything to do with the ROM, it’s just a key mapping issue, or a registry problem?
Any help would be great,
Thanks,
Captain
Hard-reset first as may be a bad flash since not noted by other users.
stylez said:
Hard-reset first as may be a bad flash since not noted by other users.
Click to expand...
Click to collapse
Nope hard reset didn't fix it. Center D-pad button is still launching celetask.
Captainkb1222 said:
Nope hard reset didn't fix it. Center D-pad button is still launching celetask.
Click to expand...
Click to collapse
Flash stock rom "to clean nand" check if anything adverse on stock, if not flash custom again and hard-reset after.