The problem is that...
when i click START - SYSTEM - SCREEN - ALIGN SCREEN...
it freezes when it shows the first 'star' where you have to align. (the star at the centre of the screen when you press align screen)
Is there a fix or patch on this?
It's happening on most ROMs i put on my SPV M3100...
apart from the official rom (which is boring compared to other cooked roms).
Thanks
Are you using Roms with FTouchflo in it?
gerald_s said:
Are you using Roms with FTouchflo in it?
Click to expand...
Click to collapse
Yeah, I experienced the same thing with FTouchflo installed.
the answer is here:
http://forum.xda-developers.com/showpost.php?p=1745832&postcount=93
gerald_s said:
Are you using Roms with FTouchflo in it?
Click to expand...
Click to collapse
No... :S ive not got ftouchflo installed.
Can you please give more details about your device? Bootloader, ROM name (the one you are using now)... It will help troubleshoot your problem.
i assume it works when you first have to allign it, after a flash...
am i right?
if yes then it probably has to do smth. with the programs in your extended rom that get installed on the first boot
softonic123 said:
i assume it works when you first have to allign it, after a flash...
am i right?
if yes then it probably has to do smth. with the programs in your extended rom that get installed on the first boot
Click to expand...
Click to collapse
Yes I think you are right because with I can a align the screen infinite times with the original WM6 Hermes ROM... but with any other ROM e.g. Shwaps or TNT or Black ROM I can only align it once... just after putting the ROM on. But i know for sure its not FTouchFlo as I do not have that installed.
KarhU said:
Can you please give more details about your device? Bootloader, ROM name (the one you are using now)... It will help troubleshoot your problem.
Click to expand...
Click to collapse
I am using the WM6 Hermes Official ROM
only becuase thats the only ROM i can re-align my device when it goes out of alignment...
tabla said:
I am using the WM6 Hermes Official ROM
only becuase thats the only ROM i can re-align my device when it goes out of alignment...
Click to expand...
Click to collapse
Later Schap's ROMs (4.20 and 4.22) and some other cooked ROMs contain FTouchFlo, FTouchFlo is also contained in various Touch Cubes installations for Hermes - even commercial Touch Commander contains it. Be sure not to have any of these installed. That might be the culprit. The behavior you describe seems to be FTouchFlo - after you click the first star, the screen does not react, but the buttons work, functionality of screen returns after a soft reset. It can also be a different problem, but we need to single FTouchFlo out completely before digging deeper.
KarhU said:
Later Schap's ROMs (4.20 and 4.22) and some other cooked ROMs contain FTouchFlo, FTouchFlo is also contained in various Touch Cubes installations for Hermes - even commercial Touch Commander contains it. Be sure not to have any of these installed. That might be the culprit. The behavior you describe seems to be FTouchFlo - after you click the first star, the screen does not react, but the buttons work, functionality of screen returns after a soft reset. It can also be a different problem, but we need to single FTouchFlo out completely before digging deeper.
Click to expand...
Click to collapse
yes I am 100% sure anything with touchflo is not installed
e.g. the cube.. touch flo... etc
And yes it is exactly how u desribed about ... if you soft reset if just returns to the today screen. its just my SPV m3100 keeps on moving out of alignment... i tried to follow the instructions on some forums to get the screen alignment to stop but i dont seem to get them...
but anyway... thanks
use file explorer to go to \Windows\Startup. Rename this to \Windows\Startup-off and create a new folder Startup (now empty)
Restart.
Use align screen without problems, reverse what you did with the Startup programs.
I will bet you this works for you. One of those programs that start automatically (But do not show up in the task manager) stops your align screen from work.
disable touchflow
I've had the same problems with the screen allignment.
After disabling touch flow the problem was gone
Related
Hi Folks,
I'm looking for an Original HTC Artemis Bootscreen an how to change it.
The T-Mobile Screen is ugly.
Can Anybody help me?
Thunderhawk36
Thunderhawk36 said:
Hi Folks,
I'm looking for an Original HTC Artemis Bootscreen an how to change it.
The T-Mobile Screen is ugly.
Can Anybody help me?
Thunderhawk36
Click to expand...
Click to collapse
use this file. just copy it in windows dir and soft-reset.
ai_99 said:
use this file. just copy it in windows dir and soft-reset.
Click to expand...
Click to collapse
Sorry, but i'm looking for the screen just before the welcome screen.
The one where the Rom Version is shown.
Thanks
Thunderhawk
Hmm.. how many times do ya actually reset your phone to look at that screen?
MasK said:
Hmm.. how many times do ya actually reset your phone to look at that screen?
Click to expand...
Click to collapse
Not very much times , but the pink T-Mobile Logo is going to nerve me.
Thunderhawk
Thunderhawk36 said:
Not very much times , but the pink T-Mobile Logo is going to nerve me.
Thunderhawk
Click to expand...
Click to collapse
getting on my nerves too.. want a nice bluefish over there... have figured it out?
Yep you need to flash a new rom because as far as I know thats the only way it can be changed since its written at the same time as the ROM. Tom's B&Bv3 has just changed mine from the o2 default to the HTC logo, ask him how he did it but I'm pretty sure you need a new ROM with the logo of your choice embedded.
PS: Don't think you can do the log seperately either but I'm sure a more knowledgable person will be along shortly
markquinton said:
Yep you need to flash a new rom because as far as I know thats the only way it can be changed since its written at the same time as the ROM. Tom's B&Bv3 has just changed mine from the o2 default to the HTC logo, ask him how he did it but I'm pretty sure you need a new ROM with the logo of your choice embedded.
PS: Don't think you can do the log seperately either but I'm sure a more knowledgable person will be along shortly
Click to expand...
Click to collapse
Totally not going for me.. just upgraded to wm6 and the new activesync... maybe that's the reason?
There was a way I heard of using the RUU and replacing a file with the new image you wanted for splash...
"Perhaps you should look at this thread: http://forum.xda-developers.com/viewtopic.php?t=12898.
There is a great program on there for converting pictures to .nb files and also a CAB which, when run, will change the boot images.
This does require putting the splash1.nb and splash2.nb files into the /windows/ directory before running MDA3_bootimage_changer2.CAB,
but if you want to just run a CAB file you can just edit that CAB and place your own created splash1.nb and splash2.nb files
in it with the location set as /windows/ (I tried it with WinCE CAB Manager and this way works as well)."
http://forum.xda-developers.com/showthread.php?t=231632
eppoeh said:
Totally not going for me.. just upgraded to wm6 and the new activesync... maybe that's the reason?
Click to expand...
Click to collapse
It does depend on the rom, B&B v1 & 2 didn't update my boot screen but v3 did so maybe you've got an old version? Are you actually using the B&B rom at all? Not all rom updates change the boot screen, it depends on the chef if they include em in the first place
markquinton said:
It does depend on the rom, B&B v1 & 2 didn't update my boot screen but v3 did so maybe you've got an old version? Are you actually using the B&B rom at all? Not all rom updates change the boot screen, it depends on the chef if they include em in the first place
Click to expand...
Click to collapse
B&B? Did i miss something?
Tried two ways:
1: making the splash1 and splash2
2: tried RUU updating the splash, but fails, think it's the new activesync.
Did i mention that i'm trying this on a htc p3300?
Sorry, B&B is Black & Blue. Its the ROM that Tom Codon has been releasing and updating for the P3300\Artemis\Orbit.
Can be found here: http://forum.xda-developers.com/showthread.php?t=314568
http://www.4shared.com/file/19395089/5971579/Upgrade_HTC_First_Splash.html
dopod/HTC/O2/Orange/T-Mobile Boot Screen
LINK:http://www.aray.cn/?p=1362
zrays said:
[IMAGE]
dopod/HTC/O2/Orange/T-Mobile Boot Screen
LINK:http://www.aray.cn/?p=1362
Click to expand...
Click to collapse
Can somebody please explain the chinese over there? Or give another diescription?
Getting the message: "The image file is corrupted. Please check your Update utility"
eppoeh said:
Getting the message: "The image file is corrupted. Please check your Update utility"
Click to expand...
Click to collapse
CID lock was back? Did a hard reset, unlocked again.. now i can flash again
still no custum bootscreen though
eppoeh said:
CID lock was back? Did a hard reset, unlocked again.. now i can flash again
still no custum bootscreen though
Click to expand...
Click to collapse
still no image... bad splash.nb i guess... seeing nice colored rows now (green to black)
eppoeh said:
still no image... bad splash.nb i guess... seeing nice colored rows now (green to black)
Click to expand...
Click to collapse
WOOT, Finally, i got things running
How i did it:
search the forum for: "3-splash-screens.txt"
do step 2 (might run it in a dos box, to see errors)
search the forum for: "dutty's good NBH tool v1.1"
make the nbh file
flash it into the phone
Dudes Guys
ZRAYS give you the link on post 14.
Just download the right file depending on the logo you want.
Weblink : http://www.aray.cn/?cat=34
zip files are:
P800-logo-dopod.rar
P800-logo-HTC.rar
P800-logo-HTC-new.rar
P800-logo-O2.rar
P800-logo-Orange.rar
P800-logo-T-Mobile.rar
Shall I install it for you then...
Unzip the file go on folder etc... (backup your data, but this upgrade does destroy it) launch ROMUpdateUtility.exe
..wait and smile.
Anyone had to reset their XDA Orbit?
I had a nightmare when using IGO2006 GS software, with it wiping some boot OS files and leaving it with a whitescreen on bootup (WSOD). Had to reset (did a few times after testing IGO), but just wondered if there is a consequence to resetting the Orbit.
One thing I now notice is that during boot sequence between first blue screen to the second green windows logo there is a white screen flash for half a second. Cant remember if this was there from new?
Thoughts?
Jez
That was normal with my orbit too - then i did a hard reset - soft reset before the o2 extras installed and now it boots faster, i have more program memory and no white flash. I thought it was unusual too but its due to those o2 plugins. btw o2 settings are still kept without the o2 extras.
meschle said:
That was normal with my orbit too - then i did a hard reset - soft reset before the o2 extras installed and now it boots faster, i have more program memory and no white flash. I thought it was unusual too but its due to those o2 plugins. btw o2 settings are still kept without the o2 extras.
Click to expand...
Click to collapse
Sorry Mark, confused, the O2 extras get installed on hard reset anyway dont they? it ran an O2.cab first boot after the reset....not sure if you are saying yours is faster before the hard reset or after ?
ta
Jez
JezD said:
Sorry Mark, confused, the O2 extras get installed on hard reset anyway dont they? it ran an O2.cab first boot after the reset....not sure if you are saying yours is faster before the hard reset or after ?
ta
Jez
Click to expand...
Click to collapse
They install just as the hard reset is finishing - with a 3 sec timer - place stylus in soft reset hole before timer expires and the extras wont install.
Mine is faster after the hard reset i.e. without the extras.
meschle said:
They install just as the hard reset is finishing - with a 3 sec timer - place stylus in soft reset hole before timer expires and the extras wont install.
Mine is faster after the hard reset i.e. without the extras.
Click to expand...
Click to collapse
Thanks, it might we worth another reset then, do you get any white screens at all? (even flickers/or short period on boot up)
Have u installed o2plus later?
Hez
JezD said:
Thanks, it might we worth another reset then, do you get any white screens at all? (even flickers/or short period on boot up)
Have u installed o2plus later?
Hez
Click to expand...
Click to collapse
I dont get any white screens flicker at all - its the same as my wizard but the boot time is MUCH faster - overclocking helps this.
I have not installed any of o2 plus - it is no use to me - i have better profiler etc.. The components of o2 plus can be broken down so if you just wanted one bit - a new cab can be made.
meschle said:
I dont get any white screens flicker at all - its the same as my wizard but the boot time is MUCH faster - overclocking helps this.
I have not installed any of o2 plus - it is no use to me - i have better profiler etc.. The components of o2 plus can be broken down so if you just wanted one bit - a new cab can be made.
Click to expand...
Click to collapse
Sorry to be a pain, last question (i think), if I reset again I would first like a simple way to restore all my connection settings - is there a connections/wireless/msg settings backup tool to do this?
PS I am using vodafone services hense o2 not a need for me either
Jez
JezD said:
Sorry to be a pain, last question (i think), if I reset again I would first like a simple way to restore all my connection settings - is there a connections/wireless/msg settings backup tool to do this?
PS I am using vodafone services hense o2 not a need for me either
Jez
Click to expand...
Click to collapse
There are a number of vodafone settings cabs on the forum - but if i was you just to be safe i would write down your settings before doing the reset. How did you get the settings in the first place? and no bother i am cruising and sorting out the forum.
meschle said:
There are a number of vodafone settings cabs on the forum - but if i was you just to be safe i would write down your settings before doing the reset. How did you get the settings in the first place? and no bother i am cruising and sorting out the forum.
Click to expand...
Click to collapse
Just got them of other mobile support websites - plenty of sites showing basic config details of the uk operators.....I didnt get wap sorted mind. No even sure i need it....
Can you point me to the orbit vodafone cabs?
Cheers, Jez
JezD said:
Just got them of other mobile support websites - plenty of sites showing basic config details of the uk operators.....I didnt get wap sorted mind. No even sure i need it....
Can you point me to the orbit vodafone cabs?
Cheers, Jez
Click to expand...
Click to collapse
Where you from? The cab does not need to be artemis specific as the operator settings are universal.
meschle said:
Where you from? The cab does not need to be artemis specific as the operator settings are universal.
Click to expand...
Click to collapse
In the UK...
JezD said:
In the UK...
Click to expand...
Click to collapse
Ok was not sure - put all your details in your profile inc rom in your signature - it helps
Ok here is a cab from the wizard should work in the artemis 2 ftp://[email protected]/Wizard/Operator_settings/Vodafone_UK_Contract_JAM.CAB
user name xda password xda
Thanks, next thing is ROM versions, other than hard reset is there another way to get the versions?
JezD said:
Thanks, next thing is ROM versions, other than hard reset is there another way to get the versions?
Click to expand...
Click to collapse
How do you mean - flash with a different rom?
How do i tell my rom version current?
On reboot it say ipl and os ver 1.25.0.0? is this lower than yours?
Jez
JezD said:
How do i tell my rom version current?
On reboot it say ipl and os ver 1.25.0.0? is this lower than yours?
Jez
Click to expand...
Click to collapse
No you have to look under settings\device information - i think you will find its the same as mine.
meschle said:
No you have to look under settings\device information - i think you will find its the same as mine.
Click to expand...
Click to collapse
i knew i had seen it, yep same, thanks
the o2 setting cab installation on full reset, i take it this must be more than just the osplus stuff? no sure if you know that one
jez
JezD said:
i knew i had seen it, yep same, thanks
the o2 setting cab installation on full reset, i take it this must be more than just the osplus stuff? no sure if you know that one
jez
Click to expand...
Click to collapse
This is the o2 extra stuff - all in the external rom - ftp://[email protected].com/Up...OMs/O2_Orbit_UK_1.25.206.101_extended_rom.zip
Download it and keep it safe.
It also contains the o2 dialer - i prefer the stock one, the o2 web page, the o2 tray, the only good thing is the o2 theme! lol
meschle said:
They install just as the hard reset is finishing - with a 3 sec timer - place stylus in soft reset hole before timer expires and the extras wont install.
Mine is faster after the hard reset i.e. without the extras.
Click to expand...
Click to collapse
is it clear when the 3 second timer starts?
Cheers
JezD said:
is it clear when the 3 second timer starts?
Cheers
Click to expand...
Click to collapse
Yes there is a countdown on the screen.
as a task switcher/application closer, and I noticed that my icon for the Phone application is a white box instead of the telephone it used to be.
So I got to wondering if I could fix that and how....and whether other icons could be changed as well.
Anyone?
Does this mean we all have the same problem?
Phone Button White
I GOT THE SAME PROBLEM W/WM6 BLACK EDITION.
I flash the phone again with the same rom. and it corrected.
I USED SDcard to flash just nbh file rename it hermimag.nbh,set to boot loader screen,soft rest.it fast safe. be sure boot loader 1.4 olipro
trjons said:
as a task switcher/application closer, and I noticed that my icon for the Phone application is a white box instead of the telephone it used to be.
So I got to wondering if I could fix that and how....and whether other icons could be changed as well.
Click to expand...
Click to collapse
Probably best to post this in the Hermes WM6 forum dude The problem you refer to might have been answered a few times. Make sure everything is up to date and try reflashing the ROM.
You can do this by following this guide
Ok, so I am a Newb, but I am a start guy... 153 IQ, was always top of my class - however I have no F**ng clue what the guys in the development and hacking section are talking about.
Basically, I have a TP2 for Tmobile that I would like to do something with... ANYTHING~! Preferable install a cooked WM6.5 rom, or a 6.1 rom with Manilla 2.5 for the time being. An android or Sense UI port would be nice as well.
Can someone please either help me get started by pointing my in the correct direction of a helpful sticky, because frankly its tough searching through threads like this:
"[JUL 13][APP][ALPHA4] Nitrogen 1.1 (music player for Windows Mobile)"
Any help would be appreciated by me, and other not so technically inclined individuals.
Thanks a ton!
http://thewingster.com/default.aspx they have a pic guide on how to install a cooked rom and also provide you with the rom
lilchip85 said:
http://thewingster.com/default.aspx they have a pic guide on how to install a cooked rom and also provide you with the rom
Click to expand...
Click to collapse
Guys like you Rock!
llllllllll said:
Guys like you Rock!
Click to expand...
Click to collapse
lol thanks. also click on my sig for softwares. it's always being updated with new apps that you might like for your tp2
lilchip85 said:
lol thanks. also click on my sig for softwares. it's always being updated with new apps that you might like for your tp2
Click to expand...
Click to collapse
Thanks, I checked out the ROM u use and it looks smooth, but I want Manilla
http://forum.xda-developers.com/showthread.php?t=560320
Im trying to mess with this one here. The .exe install sounds simple - but any pointers to doing this?
Also, I dont sync my contacts with Outlook - is there a preferred way to back them up otherwise?
llllllllll said:
Ok, so I am a Newb, but I am a start guy... 153 IQ, was always top of my class - however I have no F**ng clue what the guys in the development and hacking section are talking about.
Basically, I have a TP2 for Tmobile that I would like to do something with... ANYTHING~! Preferable install a cooked WM6.5 rom, or a 6.1 rom with Manilla 2.5 for the time being. An android or Sense UI port would be nice as well.
Can someone please either help me get started by pointing my in the correct direction of a helpful sticky, because frankly its tough searching through threads like this:
"[JUL 13][APP][ALPHA4] Nitrogen 1.1 (music player for Windows Mobile)"
Any help would be appreciated by me, and other not so technically inclined individuals.
Thanks a ton!
Click to expand...
Click to collapse
Welcome to forums
This is the official XDA how to flash for noobs:
http://forum.xda-developers.com/showthread.php?t=550540
Read, Search, Respect and Enjoy!
Good luck,
Will the Tom Rhodium Manilla -> http://forum.xda-developers.com/showthread.php?t=560320 Work in landscape mode?
llllllllll said:
Will the Tom Rhodium Manilla -> http://forum.xda-developers.com/showthread.php?t=560320 Work in landscape mode?
Click to expand...
Click to collapse
i don't think it will but it won't hurt to test it out. i hate not having landscape but i seem to be getting used to it.
hmm.. I think the energy rom should... ill give it a shot, worst case, i can just reflash to stock 6.1 right?
Im stuck at this part LOL
http://thewingster.com/howtohspltp2.aspx
Cant install active sync on vista
I tried running the hardspl, but it completed in 10 sec and all it did was restrart my phone
It´s better to try the Wiki instructions as they are backed up by a lot of members
Activesync is for XP computers only!!
For Vista or S7ven use Windows Mobile Device center
llllllllll said:
Im stuck at this part LOL
http://thewingster.com/howtohspltp2.aspx
Cant install active sync on vista
I tried running the hardspl, but it completed in 10 sec and all it did was restrart my phone
Click to expand...
Click to collapse
i had the windows mobile device center running and it said my phone was connected. plug in the usb and put active sync on the device and the wmd will show your phone is connected. i was confused also since it said active sync failed.
as for the hardspl
*Go into BootLoader Mode (do a Soft Reset while holding the "volume down" key on the left side of the device. Keep holding the "volume down" key until you see tricolour screen which is the bootloader mode, then release it) and verify the screen shows 0.85.OliNex, which is the HardSPL version*
orb3000 said:
It´s better to try the Wiki instructions as they are backed up by a lot of members
Activesync is for XP computers only!!
For Vista or S7ven use Windows Mobile Device center
Click to expand...
Click to collapse
what he said
lilchip85 said:
i
as for the hardspl
*Go into BootLoader Mode (do a Soft Reset while holding the "volume down" key on the left side of the device. Keep holding the "volume down" key until you see tricolour screen which is the bootloader mode, then release it) and verify the screen shows 0.85.OliNex, which is the HardSPL version*
Click to expand...
Click to collapse
How exactly do I do a soft reset? What else do I hold down aside from the volume down key?
llllllllll said:
How exactly do I do a soft reset? What else do I hold down aside from the volume down key?
Click to expand...
Click to collapse
(if you have tmobile it's the lil circular slot on the right) just power off your device when you turn it on just hold the volume down
I did that and its already showing SPL - ).85.01 olinex
I didnt think the process worked as it said it takes 10 min, and it took about 6 seconds.
Is this all i needed to do and can i start the rom flash now?
llllllllll said:
I did that and its already showing SPL - ).85.01 olinex
I didnt think the process worked as it said it takes 10 min, and it took about 6 seconds.
Is this all i needed to do and can i start the rom flash now?
Click to expand...
Click to collapse
it says 10 mins but it doesn't take that long. now you can flash away. i've flashed my phone like 3 times and ended with the touch it rom. i never tried tom codon rom. if you do try and landscape works let me know!
also you only need to hardspl once. so if you get tired of the rom just plug it in. run the customruu.exe and flash the new rom but ofcourse follow the instructions on the site lol
Hey everybody, I just recently bought a T-mobile touch pro 2 and I have to say, I love it.
Now, I switched ROM's and I did really enjoy it but I was receiving alot of issuse so I switched back and don't plan on changing again. But what I don't like is how every time I turn it on I get an annoying "Stick together" screen staring me in the face because of the t-mobile wm 6.5 stock rom.
Does anyone have any suggestion of what I could do to replace that with something alittle more stylish than a big pink square? haha
Oh, before I forget, I also uploaded Wajk's BootPackage v1.4 and I love it, but when it gets passed the diagnosis of the phone shouldn't it show the windows 7 boot? I'm just getting the standard Orange Microsoft one for WM 6.5. I was planning on doing a reg hack, but I didn't want to screw anything up. If anyone had any ideas on how to change these two settings I would greatly appreciate it.
twitch153 said:
Hey everybody, I just recently bought a T-mobile touch pro 2 and I have to say, I love it.
Now, I switched ROM's and I did really enjoy it but I was receiving alot of issuse so I switched back and don't plan on changing again. But what I don't like is how every time I turn it on I get an annoying "Stick together" screen staring me in the face because of the t-mobile wm 6.5 stock rom.
Click to expand...
Click to collapse
All I did to get rid of my "Stick Together" boot screen and turn it into a black "Touch Pro2" screen was flash a WWE stock ROM. These stock ROMs replace boot screens and radio-roms.
sumflipnol said:
All I did to get rid of my "Stick Together" boot screen and turn it into a black "Touch Pro2" screen was flash a WWE stock ROM. These stock ROMs replace boot screens and radio-roms.
Click to expand...
Click to collapse
See I did that before and I was getting services.exe errors, I don't really wanna replace the ROM I just want to get rid of the stock ROM, I just want to replace the boot screen.
twitch153 said:
See I did that before and I was getting services.exe errors, I don't really wanna replace the ROM I just want to get rid of the stock ROM, I just want to replace the boot screen.
Click to expand...
Click to collapse
All I did was flash the WWE stock ROM then flash a custom ROM. You don't need to stay on a stock ROM.
That is confusing! You don't want to replace the stock ROM, yet you want to get rid of it?
If you want a custom bootscreen (like what I have on both of my devices), here's my tutorial.
Thank you very much for that link! It was extremely helpful! I haven't tried anything out yet but I'm sure it will work. Thank you again, this will be a great birthday gift to me haha
hklm\software\htc\htcanimation
The Jack of Clubs said:
hklm\software\htc\htcanimation
Click to expand...
Click to collapse
I think the OP is talking about the first and second level splash screens (right at boot and the "R G D" info screen).
sumflipnol said:
I think the OP is talking about the first and second level splash screens (right at boot and the "R G D" info screen).
Click to expand...
Click to collapse
No, the OP is referring to the Startup animation and the shutdown animation. That does solve one problem, but it still doesn's remove the beginning huge pink "Stick Together" square. I don't know where that would be located in registry but the other two images (Startup.gif and shutdown.gif) are located there.
sumflipnol said:
All I did was flash the WWE stock ROM then flash a custom ROM. You don't need to stay on a stock ROM.
That is confusing! You don't want to replace the stock ROM, yet you want to get rid of it?
If you want a custom bootscreen (like what I have on both of my devices), here's my tutorial.
Click to expand...
Click to collapse
Yeah...haha I realized that I meant to say that I wanted to remove the stock rom boot image, I apologize for the confusion, I actually read it myself and I got confused! haha
sumflipnol said:
I think the OP is talking about the first and second level splash screens (right at boot and the "R G D" info screen).
Click to expand...
Click to collapse
Whoops haha I didn't realize that I was the OP hahaha! XD Yeah, that's exactly what I'm talking about. Sorry, again, it's kinda late here and I know my mind doesn't usually think well too late haha
Does anyone know how to do it without HardSPL? I actually used it before and I don't really have the money to pay fod another use, seeing as I have no job haha
twitch153 said:
Does anyone know how to do it without HardSPL? I actually used it before and I don't really have the money to pay fod another use, seeing as I have no job haha
Click to expand...
Click to collapse
You mean you already used the stock SPL restore? If you did, I don't know how to get around it...
You need HSPL to flash the custom splash screens because they're unofficial/unsigned.
sumflipnol said:
All I did was flash the WWE stock ROM then flash a custom ROM. You don't need to stay on a stock ROM.
That is confusing! You don't want to replace the stock ROM, yet you want to get rid of it?
If you want a custom bootscreen (like what I have on both of my devices), here's my tutorial.
Click to expand...
Click to collapse
When I went into this tutorial and tried to open the "Flasing tools" It worked fine, but when I tried to execute the custom ROM that was in there, my virus protection said it was infected with a trojan virus. Any idea why it won't work for me?
twitch153 said:
When I went into this tutorial and tried to open the "Flasing tools" It worked fine, but when I tried to execute the custom ROM that was in there, my virus protection said it was infected with a trojan virus. Any idea why it won't work for me?
Click to expand...
Click to collapse
Are you talking about the "Rhodium RUU"? If so, that's a common issue with anti-virus software. I have to temporarily disable by McAfee security, unzip the file, obtain the RUU, and flash. Once I re-enable my anti-virus software, it detects the RUU as a trojan. So, you will have to either make an exception, or you will have to temporarily disable your anti-virus software.
Here is the "Touch Pro 2".nbh file I came upon If you could make the second one I would greatly appreciate it. By the way, do you know how you turn on the phone and after the boot the big orange screen pops up and says "Windows" do you happen to know how to replace that as well?
That's welcomehead.192.png in the SYS. Search and replace.
twitch153 said:
Here is the "Touch Pro 2".nbh file I came upon If you could make the second one I would greatly appreciate it. By the way, do you know how you turn on the phone and after the boot the big orange screen pops up and says "Windows" do you happen to know how to replace that as well?
Click to expand...
Click to collapse
Here you go!
For the orange "Windows" screen, I have a question: is it animated, or is it just a solid image?
If it's animated, I can PM you a .cab that can change it to the Windows 7 startup screen; otherwise, you can replace those with .gif files. If it's a solid image, you'll have to replace either the "welcomehead.png" or the "welcomehead.192.png" (I think the name depends on whether or not you're on a stock/custom ROM) in your phone's \Windows folder.
I remember there being a setting in Advanced Configuration Tool that lets you change these two, but I'm not sure.
Thank you very much for the files! I'll try and scrape up some money to use the HSPL, I figured out how to remove the orange "windows" screen, oddly enough I had both the welcomehead.png and welcomehead.192.png in my windows folder, I just used total commander and switched the image with another one of my choice, thanks for the help guys
Hard SPL should let you re-install it if its for the same IMEI number, had the same problem and it let me re-install onto the same handset. Only problem is if you have a new IMEI. Also you will be charged if you use the same IP address to re-install it. If you change the service provided IP then no problem... Or use a mates PC if they don't mind....
ultramag69 said:
If you change the service provided IP then no problem... Or use a mates PC if they don't mind....
Click to expand...
Click to collapse
Yeah, that's the problem, I do have a new IMEI because my older phone got damaged so I returned it and got a new one, but do you think it's possible if I download Hard-SPL off of my phone and then execute it off of my computer? Or do you think I could just disconnect my Ethernet cable so the program can't detect if it's already been used or not? I mean, it could be possible yes?