Anyone had to reset their XDA Orbit?
I had a nightmare when using IGO2006 GS software, with it wiping some boot OS files and leaving it with a whitescreen on bootup (WSOD). Had to reset (did a few times after testing IGO), but just wondered if there is a consequence to resetting the Orbit.
One thing I now notice is that during boot sequence between first blue screen to the second green windows logo there is a white screen flash for half a second. Cant remember if this was there from new?
Thoughts?
Jez
That was normal with my orbit too - then i did a hard reset - soft reset before the o2 extras installed and now it boots faster, i have more program memory and no white flash. I thought it was unusual too but its due to those o2 plugins. btw o2 settings are still kept without the o2 extras.
meschle said:
That was normal with my orbit too - then i did a hard reset - soft reset before the o2 extras installed and now it boots faster, i have more program memory and no white flash. I thought it was unusual too but its due to those o2 plugins. btw o2 settings are still kept without the o2 extras.
Click to expand...
Click to collapse
Sorry Mark, confused, the O2 extras get installed on hard reset anyway dont they? it ran an O2.cab first boot after the reset....not sure if you are saying yours is faster before the hard reset or after ?
ta
Jez
JezD said:
Sorry Mark, confused, the O2 extras get installed on hard reset anyway dont they? it ran an O2.cab first boot after the reset....not sure if you are saying yours is faster before the hard reset or after ?
ta
Jez
Click to expand...
Click to collapse
They install just as the hard reset is finishing - with a 3 sec timer - place stylus in soft reset hole before timer expires and the extras wont install.
Mine is faster after the hard reset i.e. without the extras.
meschle said:
They install just as the hard reset is finishing - with a 3 sec timer - place stylus in soft reset hole before timer expires and the extras wont install.
Mine is faster after the hard reset i.e. without the extras.
Click to expand...
Click to collapse
Thanks, it might we worth another reset then, do you get any white screens at all? (even flickers/or short period on boot up)
Have u installed o2plus later?
Hez
JezD said:
Thanks, it might we worth another reset then, do you get any white screens at all? (even flickers/or short period on boot up)
Have u installed o2plus later?
Hez
Click to expand...
Click to collapse
I dont get any white screens flicker at all - its the same as my wizard but the boot time is MUCH faster - overclocking helps this.
I have not installed any of o2 plus - it is no use to me - i have better profiler etc.. The components of o2 plus can be broken down so if you just wanted one bit - a new cab can be made.
meschle said:
I dont get any white screens flicker at all - its the same as my wizard but the boot time is MUCH faster - overclocking helps this.
I have not installed any of o2 plus - it is no use to me - i have better profiler etc.. The components of o2 plus can be broken down so if you just wanted one bit - a new cab can be made.
Click to expand...
Click to collapse
Sorry to be a pain, last question (i think), if I reset again I would first like a simple way to restore all my connection settings - is there a connections/wireless/msg settings backup tool to do this?
PS I am using vodafone services hense o2 not a need for me either
Jez
JezD said:
Sorry to be a pain, last question (i think), if I reset again I would first like a simple way to restore all my connection settings - is there a connections/wireless/msg settings backup tool to do this?
PS I am using vodafone services hense o2 not a need for me either
Jez
Click to expand...
Click to collapse
There are a number of vodafone settings cabs on the forum - but if i was you just to be safe i would write down your settings before doing the reset. How did you get the settings in the first place? and no bother i am cruising and sorting out the forum.
meschle said:
There are a number of vodafone settings cabs on the forum - but if i was you just to be safe i would write down your settings before doing the reset. How did you get the settings in the first place? and no bother i am cruising and sorting out the forum.
Click to expand...
Click to collapse
Just got them of other mobile support websites - plenty of sites showing basic config details of the uk operators.....I didnt get wap sorted mind. No even sure i need it....
Can you point me to the orbit vodafone cabs?
Cheers, Jez
JezD said:
Just got them of other mobile support websites - plenty of sites showing basic config details of the uk operators.....I didnt get wap sorted mind. No even sure i need it....
Can you point me to the orbit vodafone cabs?
Cheers, Jez
Click to expand...
Click to collapse
Where you from? The cab does not need to be artemis specific as the operator settings are universal.
meschle said:
Where you from? The cab does not need to be artemis specific as the operator settings are universal.
Click to expand...
Click to collapse
In the UK...
JezD said:
In the UK...
Click to expand...
Click to collapse
Ok was not sure - put all your details in your profile inc rom in your signature - it helps
Ok here is a cab from the wizard should work in the artemis 2 ftp://[email protected]/Wizard/Operator_settings/Vodafone_UK_Contract_JAM.CAB
user name xda password xda
Thanks, next thing is ROM versions, other than hard reset is there another way to get the versions?
JezD said:
Thanks, next thing is ROM versions, other than hard reset is there another way to get the versions?
Click to expand...
Click to collapse
How do you mean - flash with a different rom?
How do i tell my rom version current?
On reboot it say ipl and os ver 1.25.0.0? is this lower than yours?
Jez
JezD said:
How do i tell my rom version current?
On reboot it say ipl and os ver 1.25.0.0? is this lower than yours?
Jez
Click to expand...
Click to collapse
No you have to look under settings\device information - i think you will find its the same as mine.
meschle said:
No you have to look under settings\device information - i think you will find its the same as mine.
Click to expand...
Click to collapse
i knew i had seen it, yep same, thanks
the o2 setting cab installation on full reset, i take it this must be more than just the osplus stuff? no sure if you know that one
jez
JezD said:
i knew i had seen it, yep same, thanks
the o2 setting cab installation on full reset, i take it this must be more than just the osplus stuff? no sure if you know that one
jez
Click to expand...
Click to collapse
This is the o2 extra stuff - all in the external rom - ftp://[email protected].com/Up...OMs/O2_Orbit_UK_1.25.206.101_extended_rom.zip
Download it and keep it safe.
It also contains the o2 dialer - i prefer the stock one, the o2 web page, the o2 tray, the only good thing is the o2 theme! lol
meschle said:
They install just as the hard reset is finishing - with a 3 sec timer - place stylus in soft reset hole before timer expires and the extras wont install.
Mine is faster after the hard reset i.e. without the extras.
Click to expand...
Click to collapse
is it clear when the 3 second timer starts?
Cheers
JezD said:
is it clear when the 3 second timer starts?
Cheers
Click to expand...
Click to collapse
Yes there is a countdown on the screen.
Related
OK I think I just did a stupid thing!
I thought that a Radio only upgrade didn't require a Hard Reset (i.e. to Factory defaults and losing all your local data / program installs).
So I went from 1.09 to 1.11, hit the 'reset' button on completion and the stupid thing did a hard reset!
So where did I go wrong - well I think it is because I did the radio upgrade as a standard upgrade just by running the normal update files with only the new radio ROM file present and no other ROM files.
What I didn't do was to enter the BootLoader manually first I left it all up to the RUU files to do the job :roll:
Is it this (not manually entering the bootloader first - like the Wiki tells you to - mind you it also tells you to hard reset) which caused the hard reset which was beyond my control :?:
I'm sure I've changed the Radio ROM only on my old BA without all this hassle - just can't remember what I did differently.
From what I remember, you are supposed to press the reset pin hole while pushing down on the ON/OFF button. This would cause it to soft reset according to the on-screen instructions, and it did on mine when I tried it. But of course, I also performed a backup to be on the safe side.
Really not my day today - Whilst reinstalling and going through reset cycles my Exec turned into a brick :shock:
Stuck at boot-screen with ROM versions showing
Hopefully the Wiki resolution to this one is going to work..
Ever wish you'd just left the thing alone
Whenever I've done a radio upgrade, I've simply pressed the reset button with the tip of the stylus - that's it.
I've done about 6 up/downgrades, I would guess, and not had any problems. I hope you get yours sorted out.
Cheers,
Steve.
StevePritchard said:
Whenever I've done a radio upgrade, I've simply pressed the reset button with the tip of the stylus - that's it.
Click to expand...
Click to collapse
At least I'm not going mad then - That's exactly what I did before this all went pear-shaped.
Did you upgrade whilst in the bootloader or just from WM5 running normally?
dpayea said:
Stuck at boot-screen with ROM versions showing
Hopefully the Wiki resolution to this one is going to work..
Click to expand...
Click to collapse
De-Bricked
dpayea said:
dpayea said:
Stuck at boot-screen with ROM versions showing
Hopefully the Wiki resolution to this one is going to work..
Click to expand...
Click to collapse
De-Bricked
Click to expand...
Click to collapse
Good to hear!
dpayea said:
StevePritchard said:
Whenever I've done a radio upgrade, I've simply pressed the reset button with the tip of the stylus - that's it.
Click to expand...
Click to collapse
At least I'm not going mad then - That's exactly what I did before this all went pear-shaped.
Did you upgrade whilst in the bootloader or just from WM5 running normally?
Click to expand...
Click to collapse
WM5 running normally - to be fair, it sometimes took a few attempts for the upgrade to "take", but once it was going, I've had no problems - glad to hear you manage to de-brick it.
Cheers,
Steve.
dpayea said:
dpayea said:
Stuck at boot-screen with ROM versions showing
Hopefully the Wiki resolution to this one is going to work..
Click to expand...
Click to collapse
De-Bricked
Click to expand...
Click to collapse
Good to hear!
i tried to upgare my bootloader
with the black edition but when i start the rom upgrade it asked me what boot loader i have
so i had 1.01
when i give that option it tells me to run the rom only with mityy
but i saw an option in the rom upgrade that say force spl so i choos that option and after few second it finished and i see i have 1.13 oli
so it works that way because i didnt peek version in the rom upgrade i just peek the force spl
????
yes, it worked... as you can tell BY THE FACT YOUR PHONE IS STILL OK... why the hell did you waste YOUR TIME AND OURS by posting a whole ****ing topic telling the world "whoopee my flash succeeded because I followed instructions."
sorry man!"'
but after idid it my phone some times fast and in the begining it slow
somthing hapend?
do i need to do somthing now?
Yea, And if you would have read the Hard SPL thread or the Upgrade Guide by MrVanx you would have known what to do! I guess it's good someone like Olipro took the time to create this!
bubu23 said:
sorry man!"'
but after idid it my phone some times fast and in the begining it slow
somthing hapend?
do i need to do somthing now?
Click to expand...
Click to collapse
nope... you don't need to do anything at all, that's completely in your head.
yes but in the tread how to make hard spl it say simply if you have
1.01 then choose the first(blue)
when i choose it it tell me that i cant continue that i need to do it with mitty
but i didnt choose the boot loader i have i just choose the force sspl then it worked i hope
bubu23 said:
yes but in the tread how to make hard spl it say simply if you have
1.01 then choose the first(blue)
when i choose it it tell me that i cant continue that i need to do it with mitty
but i didnt choose the boot loader i have i just choose the force sspl then it worked i hope
Click to expand...
Click to collapse
IT WORKED, IT WORKED, IT WORKED, IT WORKED DOT ****ING COM
stop worrying and move on with your life... christ
Olipro,
hi,
I flash with LVSW's full update with 1.13Oli SPL, During the first screen I select Force SSPL. After flash the ROM I got white backgroud on Today's screen. I read through few people's experience with white background and try to fix it. Nothing works so I flash the OS only upgrade. The upgrade stop in middle of flashing. Later I discover the DL files were bad. Now, my 8525 bootup into 3 color screen with:
herm 1.13Oli screen. No activeSync connection..... In XP I can see the MobileDevice, but nothing within the folder.
Is it my device is now brick??
Any help will be appreciate.
Penske MB said:
hi,
I flash with LVSW's full update with 1.13Oli SPL, During the first screen I select Force SSPL. After flash the ROM I got white backgroud on Today's screen. I read through few people's experience with white background and try to fix it. Nothing works so I flash the OS only upgrade. The upgrade stop in middle of flashing. Later I discover the DL files were bad. Now, my 8525 bootup into 3 color screen with:
herm 1.13Oli screen. No activeSync connection..... In XP I can see the MobileDevice, but nothing within the folder.
Is it my device is now brick??
Any help will be appreciate.
Click to expand...
Click to collapse
go to the Hard-SPL thread, download the new Hard-SPL.
when flashing, select 1.11 and tick Hard-SPL (or don't, doesn't really matter).
go through the flash, let it update your SPL.
now, with 1.30, flash the latest LVSW WM6 ROM, or any other
Hi,
Thx for the fast response.
I have DL your newest Hard-SPL V4 version 1.30Oli. When I run the update it shows error (264) connection. No matter what, it will not update.
I have remove and reinstall activesync, but XP will find the device, but no activesync connection.
What should I di next??
THX
Olipro said:
go to the Hard-SPL thread, download the new Hard-SPL.
when flashing, select 1.11 and tick Hard-SPL (or don't, doesn't really matter).
go through the flash, let it update your SPL.
now, with 1.30, flash the latest LVSW WM6 ROM, or any other
Click to expand...
Click to collapse
Penske MB said:
Hi,
Thx for the fast response.
I have DL your newest Hard-SPL V4 version 1.30Oli. When I run the update it shows error (264) connection. No matter what, it will not update.
I have remove and reinstall activesync, but XP will find the device, but no activesync connection.
What should I di next??
THX
Click to expand...
Click to collapse
put a full LVSW NBH (as HERMIMG.nbh) on a MicroSD card and put it in your Hermes
When I power on 8525, it just show 3 colors screen. OS will not boot, it just star at 3 colors screen. How can I run the files Under MicroSD card?? Or the device will automatically run the NBH??
THX
Olipro said:
put a full LVSW NBH (as HERMIMG.nbh) on a MicroSD card and put it in your Hermes
Click to expand...
Click to collapse
Penske MB said:
When I power on 8525, it just show 3 colors screen. OS will not boot, it just star at 3 colors screen. How can I run the files Under MicroSD card?? Or the device will automatically run the NBH??
THX
Click to expand...
Click to collapse
call it HERMIMG.nbh and it will
Hi,
It is starting now and I will post the result soon. If it works, I will definitely send you my donation!!!
Olipro said:
call it HERMIMG.nbh and it will
Click to expand...
Click to collapse
Oli
Thanks foe all your help. I have kept my promise. Please chech youe Paypal account
Now, can you help me why I still have the white screen on Today screen??
thx
Penske MB said:
Thanks foe all your help. I have kept my promise. Please chech youe Paypal account
Now, can you help me why I still have the white screen on Today screen??
thx
Click to expand...
Click to collapse
If you read the forum thread associated with the newest LVSH this is a known problem and several solutions have been suggested - read the post and try the suggestions.
----------
Penske MB said:
Thanks foe all your help. I have kept my promise. Please chech youe Paypal account
Now, can you help me why I still have the white screen on Today screen??
thx
Click to expand...
Click to collapse
thanks very much... much appreciated.
have you tried going to the today screen item in settings and manually setting a today image?
The problem is that...
when i click START - SYSTEM - SCREEN - ALIGN SCREEN...
it freezes when it shows the first 'star' where you have to align. (the star at the centre of the screen when you press align screen)
Is there a fix or patch on this?
It's happening on most ROMs i put on my SPV M3100...
apart from the official rom (which is boring compared to other cooked roms).
Thanks
Are you using Roms with FTouchflo in it?
gerald_s said:
Are you using Roms with FTouchflo in it?
Click to expand...
Click to collapse
Yeah, I experienced the same thing with FTouchflo installed.
the answer is here:
http://forum.xda-developers.com/showpost.php?p=1745832&postcount=93
gerald_s said:
Are you using Roms with FTouchflo in it?
Click to expand...
Click to collapse
No... :S ive not got ftouchflo installed.
Can you please give more details about your device? Bootloader, ROM name (the one you are using now)... It will help troubleshoot your problem.
i assume it works when you first have to allign it, after a flash...
am i right?
if yes then it probably has to do smth. with the programs in your extended rom that get installed on the first boot
softonic123 said:
i assume it works when you first have to allign it, after a flash...
am i right?
if yes then it probably has to do smth. with the programs in your extended rom that get installed on the first boot
Click to expand...
Click to collapse
Yes I think you are right because with I can a align the screen infinite times with the original WM6 Hermes ROM... but with any other ROM e.g. Shwaps or TNT or Black ROM I can only align it once... just after putting the ROM on. But i know for sure its not FTouchFlo as I do not have that installed.
KarhU said:
Can you please give more details about your device? Bootloader, ROM name (the one you are using now)... It will help troubleshoot your problem.
Click to expand...
Click to collapse
I am using the WM6 Hermes Official ROM
only becuase thats the only ROM i can re-align my device when it goes out of alignment...
tabla said:
I am using the WM6 Hermes Official ROM
only becuase thats the only ROM i can re-align my device when it goes out of alignment...
Click to expand...
Click to collapse
Later Schap's ROMs (4.20 and 4.22) and some other cooked ROMs contain FTouchFlo, FTouchFlo is also contained in various Touch Cubes installations for Hermes - even commercial Touch Commander contains it. Be sure not to have any of these installed. That might be the culprit. The behavior you describe seems to be FTouchFlo - after you click the first star, the screen does not react, but the buttons work, functionality of screen returns after a soft reset. It can also be a different problem, but we need to single FTouchFlo out completely before digging deeper.
KarhU said:
Later Schap's ROMs (4.20 and 4.22) and some other cooked ROMs contain FTouchFlo, FTouchFlo is also contained in various Touch Cubes installations for Hermes - even commercial Touch Commander contains it. Be sure not to have any of these installed. That might be the culprit. The behavior you describe seems to be FTouchFlo - after you click the first star, the screen does not react, but the buttons work, functionality of screen returns after a soft reset. It can also be a different problem, but we need to single FTouchFlo out completely before digging deeper.
Click to expand...
Click to collapse
yes I am 100% sure anything with touchflo is not installed
e.g. the cube.. touch flo... etc
And yes it is exactly how u desribed about ... if you soft reset if just returns to the today screen. its just my SPV m3100 keeps on moving out of alignment... i tried to follow the instructions on some forums to get the screen alignment to stop but i dont seem to get them...
but anyway... thanks
use file explorer to go to \Windows\Startup. Rename this to \Windows\Startup-off and create a new folder Startup (now empty)
Restart.
Use align screen without problems, reverse what you did with the Startup programs.
I will bet you this works for you. One of those programs that start automatically (But do not show up in the task manager) stops your align screen from work.
disable touchflow
I've had the same problems with the screen allignment.
After disabling touch flow the problem was gone
I had a problem with the password TWICE!! my P3600 does not recognize my password after i power off and on the device. i had to do a hard reset in order to use the device again, then i'd lost all my data. i am a Apple user so i did not back it up, actually i do not know how to sync my WM6 with my Apple.
now i do not use the password in fear that it may happen again. is this a bug with WM6? apparently a few people have experience this as well.
Hi,
it's a problem which happens if the device is reset before the change in the registry is written into the flashrom.
Turn the device off by holding the powerbutton down for about 10s, then you should be fine.
LIT
Lost_in_translation said:
Hi,
it's a problem which happens if the device is reset before the change in the registry is written into the flashrom.
Turn the device off by holding the powerbutton down for about 10s, then you should be fine.
LIT
Click to expand...
Click to collapse
i did not power off/on, or reset, the device right after i created the password. the password was working fine when the device goes into the sleep mode. in fact, i am sure the password was fine as well when i power off/on a couple of times. it just seems to happen randomly without a pattern.
your suggestion seems logical enough, but i know for sure it was LONG enough for it to update the registry.
Good, someone else with this problem. I posted this in Shaps rom thread on Monday but got no reply.
I flashed a standard WM5 Orange M700 up to Schaps new rom.
First i sim unlocked it.
Then hard SPL
Then flashed the ROM
Got everything set up and must have rebooted a few times in different ways after setting the password and then 1 time it just wouldnt accept the password.
Hard reset, did everything again and same thing. I set the password the first thing when i first booted the device this time though and since that i must have reset about 5 or 6 times without problem when installing things like Random Access and stuff you obviously have to reboot. Then again after half an hour or so after another soft reset and it locks me out.
I flashed to a dif WM6 rom after this and i havent heard that there has been an issue yet.
rjefferis said:
Good, someone else with this problem. I posted this in Shaps rom thread on Monday but got no reply.
I flashed to a dif WM6 rom after this and i havent heard that there has been an issue yet.
Click to expand...
Click to collapse
well, at least this is not a problem for you so far with WM6. i have WM6, ROM verions: 3.00.707.17, ROM date: 6/29/07
sfaguy said:
i do not know how to sync my WM6 with my Apple.
.
Click to expand...
Click to collapse
take a look @ Markspace.com
sfaguy said:
well, at least this is not a problem for you so far with WM6. i have WM6, ROM verions: 3.00.707.17, ROM date: 6/29/07
Click to expand...
Click to collapse
It was with WM6 that i was having the problem, it was Schaps latest WM6 ROM.
Windoze9t8 said:
take a look @ Markspace.com
Click to expand...
Click to collapse
thanks for th info. too bad it costs $39.99 just to sync it with Mac. I was hoping there is a free software out there.
sfaguy said:
well, at least this is not a problem for you so far with WM6. i have WM6, ROM verions: 3.00.707.17, ROM date: 6/29/07
Click to expand...
Click to collapse
try the official 3.00.707.18 from Australia New Zealand version. I haven't got this problem, since.
sfaguy said:
thanks for th info. too bad it costs $39.99 just to sync it with Mac. I was hoping there is a free software out there.
Click to expand...
Click to collapse
there is a free one. just go to sourceforge.net and search for it. i forgot what the name was...
tjlabais said:
there is a free one. just go to sourceforge.net and search for it. i forgot what the name was...
Click to expand...
Click to collapse
i go to the site you mentioned, there is one called Mac-Pocket PC Sync, but i do not know how to download it. would you give me some idea about how to do that. i would really appreciate that.
sfaguy said:
i go to the site you mentioned, there is one called Mac-Pocket PC Sync, but i do not know how to download it. would you give me some idea about how to do that. i would really appreciate that.
Click to expand...
Click to collapse
okay. I just reread your first post... you said you were not able to back up data...
for me, I use PIM Backup by dotFred because it backs up the PIM on storage card, and can be restored on any WM version using the same program. (i.e. between wm5 and wm6) PIM data would be contacts, messages, call logs, calendard, etc.
if you'd really need to sync your pocket-pc to mac, you can see this
http://www.eltima.com/products/syncmate/
the one at sourceforge is still under development...
tjlabais said:
okay. I just reread your first post... you said you were not able to back up data...
if you'd really need to sync your pocket-pc to mac, you can see this
http://www.eltima.com/products/syncmate/
the one at sourceforge is still under development...
Click to expand...
Click to collapse
thanks for the info. i just downloaded this free software. i can now sync my contact & calendar between my Mac and WM6.
i really appreciate your help!
tjlabais said:
okay. I just reread your first post... you said you were not able to back up data...
for me, I use PIM Backup by dotFred because it backs up the PIM on storage card, and can be restored on any WM version using the same program. (i.e. between wm5 and wm6) PIM data would be contacts, messages, call logs, calendard, etc.
if you'd really need to sync your pocket-pc to mac, you can see this
http://www.eltima.com/products/syncmate/
the one at sourceforge is still under development...
Click to expand...
Click to collapse
hey again,
i downloaded syncmate a few weeks ago, it works great. then today, it says my beta version expired and i should go to www.eltima.com to get the newer version. i tried but with no luck. i downloaded what appears to be the latest, yet whenever i start it up, i get the expired error again.
do you have any more info on this software? or anyone in this forum use this software to sync between Mac ans WM6?
i have the same "syncmate expired"-problem. I use HTC 3300 (WM6). It has worked for many weeks, but today i get this problem.
tholle
tholle_xda said:
i have the same "syncmate expired"-problem. I use HTC 3300 (WM6). It has worked for many weeks, but today i get this problem.
tholle
Click to expand...
Click to collapse
i thought this is a free software with no expiration date. the error suggested to go to their site for a newer version, yet there is none.
i am hoping someone in this forum may have a work around as it's nice to be able to sync between Mac and WM6
here is a solution: http://www.eltima.com/download/EltimaSyncMate.dmg
it works very well. i don't know why, but it works.
tholle
Hi.
I have bought my Diamond in Sweden and it have the network "3" software, I have searched for some information about how to get rid from that and have a "normal software" but did not found anything so now I decided to ask here? Is there something I can do to get rid of it? I am sorry for my bad english, hope for answer. thx
Brkie said:
Hi.
I have bought my Diamond in Sweden and it have the network "3" software, I have searched for some information about how to get rid from that and have a "normal software" but did not found anything so now I decided to ask here? Is there something I can do to get rid of it? I am sorry for my bad english, hope for answer. thx
Click to expand...
Click to collapse
Tjena and welcome
sure.. flash it with a new rom...
If u don't want a cooked rom then flash it with a Stock HTC ROM..
more info on swedish ROM's here...
http://forum.xda-developers.com/showthread.php?t=414652
I think there is a 'trick' to flashing a 3 ROM... but I'm sure, it's in the swedish thread...
Hope that helps
NisseDILLIGAF said:
Tjena and welcome
sure.. flash it with a new rom...
If u don't want a cooked rom then flash it with a Stock HTC ROM..
more info on swedish ROM's here...
http://forum.xda-developers.com/showthread.php?t=414652
I think there is a 'trick' to flashing a 3 ROM... but I'm sure, it's in the swedish thread...
Hope that helps
Click to expand...
Click to collapse
Tack tack
Sorry but I dont know really what "cooked" rom is and what a Stock HTC ROM is, but i think that cooked rom is kinda "edited"? and then the "stock" rom is the orginal?Correct me if I am wrong.
I took a look at that page you recomended, but when I try to download the rom you uploaded,i get a message that the rom is wrong or something like that, and I took a look at the other pages to, but not a good result about how to get rid of the 3 rom.
:/
perform a hard reset, then when you switch it on for the first time, perform a soft reset before the customisation starts ! thats it!
you will need to enter the data settings using the operator settings cab file ! just search the forum
idrisito said:
perform a hard reset, then when you switch it on for the first time, perform a soft reset before the customisation starts ! thats it!
you will need to enter the data settings using the operator settings cab file ! just search the forum
Click to expand...
Click to collapse
ahh,okee but can you just explain me whitch one is "hard reset" and "soft reset"? thx alot
Brkie said:
ahh,okee but can you just explain me whitch one is "hard reset" and "soft reset"? thx alot
Click to expand...
Click to collapse
Hard reset:
http://modmydiamond.info/index.php?option=com_content&task=view&id=18&Itemid=27
Soft reset is basically turning the device off and on again.
soft reset: put the stylus in the hole thats labeled with "reset", near the stylus hole ;-)
switching on and of is not the same
Regards