I had a problem with the password TWICE!! my P3600 does not recognize my password after i power off and on the device. i had to do a hard reset in order to use the device again, then i'd lost all my data. i am a Apple user so i did not back it up, actually i do not know how to sync my WM6 with my Apple.
now i do not use the password in fear that it may happen again. is this a bug with WM6? apparently a few people have experience this as well.
Hi,
it's a problem which happens if the device is reset before the change in the registry is written into the flashrom.
Turn the device off by holding the powerbutton down for about 10s, then you should be fine.
LIT
Lost_in_translation said:
Hi,
it's a problem which happens if the device is reset before the change in the registry is written into the flashrom.
Turn the device off by holding the powerbutton down for about 10s, then you should be fine.
LIT
Click to expand...
Click to collapse
i did not power off/on, or reset, the device right after i created the password. the password was working fine when the device goes into the sleep mode. in fact, i am sure the password was fine as well when i power off/on a couple of times. it just seems to happen randomly without a pattern.
your suggestion seems logical enough, but i know for sure it was LONG enough for it to update the registry.
Good, someone else with this problem. I posted this in Shaps rom thread on Monday but got no reply.
I flashed a standard WM5 Orange M700 up to Schaps new rom.
First i sim unlocked it.
Then hard SPL
Then flashed the ROM
Got everything set up and must have rebooted a few times in different ways after setting the password and then 1 time it just wouldnt accept the password.
Hard reset, did everything again and same thing. I set the password the first thing when i first booted the device this time though and since that i must have reset about 5 or 6 times without problem when installing things like Random Access and stuff you obviously have to reboot. Then again after half an hour or so after another soft reset and it locks me out.
I flashed to a dif WM6 rom after this and i havent heard that there has been an issue yet.
rjefferis said:
Good, someone else with this problem. I posted this in Shaps rom thread on Monday but got no reply.
I flashed to a dif WM6 rom after this and i havent heard that there has been an issue yet.
Click to expand...
Click to collapse
well, at least this is not a problem for you so far with WM6. i have WM6, ROM verions: 3.00.707.17, ROM date: 6/29/07
sfaguy said:
i do not know how to sync my WM6 with my Apple.
.
Click to expand...
Click to collapse
take a look @ Markspace.com
sfaguy said:
well, at least this is not a problem for you so far with WM6. i have WM6, ROM verions: 3.00.707.17, ROM date: 6/29/07
Click to expand...
Click to collapse
It was with WM6 that i was having the problem, it was Schaps latest WM6 ROM.
Windoze9t8 said:
take a look @ Markspace.com
Click to expand...
Click to collapse
thanks for th info. too bad it costs $39.99 just to sync it with Mac. I was hoping there is a free software out there.
sfaguy said:
well, at least this is not a problem for you so far with WM6. i have WM6, ROM verions: 3.00.707.17, ROM date: 6/29/07
Click to expand...
Click to collapse
try the official 3.00.707.18 from Australia New Zealand version. I haven't got this problem, since.
sfaguy said:
thanks for th info. too bad it costs $39.99 just to sync it with Mac. I was hoping there is a free software out there.
Click to expand...
Click to collapse
there is a free one. just go to sourceforge.net and search for it. i forgot what the name was...
tjlabais said:
there is a free one. just go to sourceforge.net and search for it. i forgot what the name was...
Click to expand...
Click to collapse
i go to the site you mentioned, there is one called Mac-Pocket PC Sync, but i do not know how to download it. would you give me some idea about how to do that. i would really appreciate that.
sfaguy said:
i go to the site you mentioned, there is one called Mac-Pocket PC Sync, but i do not know how to download it. would you give me some idea about how to do that. i would really appreciate that.
Click to expand...
Click to collapse
okay. I just reread your first post... you said you were not able to back up data...
for me, I use PIM Backup by dotFred because it backs up the PIM on storage card, and can be restored on any WM version using the same program. (i.e. between wm5 and wm6) PIM data would be contacts, messages, call logs, calendard, etc.
if you'd really need to sync your pocket-pc to mac, you can see this
http://www.eltima.com/products/syncmate/
the one at sourceforge is still under development...
tjlabais said:
okay. I just reread your first post... you said you were not able to back up data...
if you'd really need to sync your pocket-pc to mac, you can see this
http://www.eltima.com/products/syncmate/
the one at sourceforge is still under development...
Click to expand...
Click to collapse
thanks for the info. i just downloaded this free software. i can now sync my contact & calendar between my Mac and WM6.
i really appreciate your help!
tjlabais said:
okay. I just reread your first post... you said you were not able to back up data...
for me, I use PIM Backup by dotFred because it backs up the PIM on storage card, and can be restored on any WM version using the same program. (i.e. between wm5 and wm6) PIM data would be contacts, messages, call logs, calendard, etc.
if you'd really need to sync your pocket-pc to mac, you can see this
http://www.eltima.com/products/syncmate/
the one at sourceforge is still under development...
Click to expand...
Click to collapse
hey again,
i downloaded syncmate a few weeks ago, it works great. then today, it says my beta version expired and i should go to www.eltima.com to get the newer version. i tried but with no luck. i downloaded what appears to be the latest, yet whenever i start it up, i get the expired error again.
do you have any more info on this software? or anyone in this forum use this software to sync between Mac ans WM6?
i have the same "syncmate expired"-problem. I use HTC 3300 (WM6). It has worked for many weeks, but today i get this problem.
tholle
tholle_xda said:
i have the same "syncmate expired"-problem. I use HTC 3300 (WM6). It has worked for many weeks, but today i get this problem.
tholle
Click to expand...
Click to collapse
i thought this is a free software with no expiration date. the error suggested to go to their site for a newer version, yet there is none.
i am hoping someone in this forum may have a work around as it's nice to be able to sync between Mac and WM6
here is a solution: http://www.eltima.com/download/EltimaSyncMate.dmg
it works very well. i don't know why, but it works.
tholle
Related
It times out every time with XP... has anyone had success? Missing Sync for OS X won't work with WM6! (boooo)
hungarianhc said:
It times out every time with XP... has anyone had success? Missing Sync for OS X won't work with WM6! (boooo)
Click to expand...
Click to collapse
you have to reflash it with a wm5 rom.
volkl23 said:
you have to reflash it with a wm5 rom.
Click to expand...
Click to collapse
Get right outa town.. seriously!?!?
Okay in all seriousness, obviously I need to flash my now WM6 device w/ a WM5 ROM. And back to what I said originally, it times out on this update. I've read reports of this problem happening to others as well.
-Kevin
look around, there's probably atleast 2 posts in the last 2 pages about where to get it.
oplitic said:
look around, there's probably atleast 2 posts in the last 2 pages about where to get it.
Click to expand...
Click to collapse
I've already gotten it. That's not the issue, but thanks. Like I said, I have the ROM.
However, the update times out. If you search for that on this message board, you'll see that others have had this problem as well. I'm just looking for some guidance, not someone telling me to "search for it."
hungarianhc said:
I've already gotten it. That's not the issue, but thanks. Like I said, I have the ROM.
However, the update times out. If you search for that on this message board, you'll see that others have had this problem as well. I'm just looking for some guidance, not someone telling me to "search for it."
Click to expand...
Click to collapse
sorry, my bad, I didn't understand your comment before. thought you were saying the WM6 times out so you need WM5 cause somehting got messed up. are you using vista? cause it wouldn't work on my vista laptop, ahd to go to my XP desktop.
oplitic said:
sorry, my bad, I didn't understand your comment before. thought you were saying the WM6 times out so you need WM5 cause somehting got messed up. are you using vista? cause it wouldn't work on my vista laptop, ahd to go to my XP desktop.
Click to expand...
Click to collapse
No i'm using XP - were you able to downgrade on XP? I upgraded my Dash to WM6... but now the WM5 downgrade times out...
hungarianhc said:
No i'm using XP - were you able to downgrade on XP? I upgraded my Dash to WM6... but now the WM5 downgrade times out...
Click to expand...
Click to collapse
yeah, i did it no problem. on vista a tried for like 2 hours straight. then first time on XP worked like a charm. did you let it sync and everyhting first, then try doing it? i believe it helped some people to revert back to the 'upgrade rom' it puts it back to one of the first roms for updating, then going to the newest WM5.
oh wow an upgrade ROM... I've never heard about this... any ideas where to find it?? I already have the ROM I want to revert to. Thanks.
http://rapidshare.com/users/7UE30C
then click 'Dash Files ID=1' then on the bottom you'll see "RUU_Excalibur_SPL-1.11_UpgradeOnly.exe" download that and run it, I tried it on Vista, didn't work, but nothing worked for Vista. It's worth a shot.
hello can you help me?
Hello do you have it in another place not in rapidshare? the wm6 beta
celperf said:
Hello do you have it in another place not in rapidshare? the wm6 beta
Click to expand...
Click to collapse
might be but I couldn't find it before. what's wrong with RS?
My device has undergone millions of flashes till now. Now, it just enters the bootloader and does not react to any ROM and bootloader tool.
Looks like my device is screaming, "Enough is enough! How many times will you change my spirit !! "
Bad news is, in my last flash, I went back to Helmi WM5 AKU3.5.1.
So, no further development from me(for both OSes)
kdskamal said:
My device has undergone millions of flashes till now. Now, it just enters the bootloader and does not react to any ROM and bootloader tool.
Looks like my device is screaming, "Enough is enough! How many times will you change my spirit !! "
Bad news is, in my last flash, I went back to Helmi WM5 AKU3.5.1.
So, no further development from me(for both OSes)
Click to expand...
Click to collapse
Hi KDSKamal,
I've been there many a time, millions of flashes and still going.
Have you tried resetting partitions with MTTY, works for me.........
Cheers,
Beast
kdskamal said:
My device has undergone millions of flashes till now. Now, it just enters the bootloader and does not react to any ROM and bootloader tool.
Looks like my device is screaming, "Enough is enough! How many times will you change my spirit !! "
Bad news is, in my last flash, I went back to Helmi WM5 AKU3.5.1.
So, no further development from me(for both OSes)
Click to expand...
Click to collapse
Sorry to hear your misfortune. But at least you got stuck at one of the good ROMs. Are you stuck at boot loader or you just can't flash?
---
@Beast: Is that done by "task 2a"?
edit: just tried abovementioned command. It didnt work
kdskamal said:
@Beast: Is that done by "task 2a"?
edit: just tried abovementioned command. It didnt work
Click to expand...
Click to collapse
task 28 55aa
@beast: it was not of any use
No matter what utility I use for upgrading, I get 'blanks' in the upgrade information
edit: yeah, it never used to happen before
mamaich said:
task 28 55aa
Click to expand...
Click to collapse
Oh no!! After that command, it surely passed the repartioning process, but, now I cannot flash any OS.(may be because, it formatted whatever I had )
Help!
kdskamal said:
@beast: it was not of any use
No matter what utility I use for upgrading, I get 'blanks' in the upgrade information
edit: yeah, it never used to happen before
Click to expand...
Click to collapse
it happened to me many times, its something that has to do with the rom image you're trying to flash.
try the following:
1. use the new NOCID_RUU flasher when universal is CONNECTED and sync'd with active sync.
2. use the old maUpgradeUt_noid.exe . uncheck USB connections from active sync, put in bootloader, and try to flash
(these steps you probably already did, but check out next step)
3. flash with a radio image. copy the radio_.nbf you want to the flash folder, aswell as the nk.nbf, then repeat steps 1 & 2
this has always worked for me when i had your problem (and it happend quite a few times)
Thanks everyone! When nothing worked, I turned to my GF's universal and did a SD-rom flash. Luckily, she too was running helmi aku3.5.1
Helmi Aku3.5 is a good ROM.
My Universal retires with it too.
It died in the beginning of the month. Hardware failure!!!
CWKJ said:
Helmi Aku3.5 is a good ROM.
My Universal retires with it too.
It died in the beginning of the month. Hardware failure!!!
Click to expand...
Click to collapse
Mine is alive again. But, I had already conviced myself to get a treo 750 or an ipaq 6915 tommorow
I've been reading up on this upgrade, and I'm very interested. The only thing is, if I do this, will it unlock my phone and if my phone unlocks, will it still work with my phone insurance? Also, were there any problems after doing this with MMS that I can fix if I were to encounter any? I've read people having problems with MMS afterwards and I use it pretty frequently so I don't want that to be like messed up. Thanks in advance for any replies.
With regards to insurance if your on about your carrier then you just flash back to the original ROM, with regards to MMS issues i'm baffled as it's simple to set up and with thousands on thousands of users with no issues there seems to be a small ammount of users with issues, you can set up automatically via connection setup or even input all the info manually if you wish.
The ammount of extra you get with WM6.1 i bet that once flashed you will never want to see WM6 anywhere... And if not you just flash back to stock ROM.
6.1
ahhxd717 said:
I've been reading up on this upgrade, and I'm very interested. The only thing is, if I do this, will it unlock my phone and if my phone unlocks, will it still work with my phone insurance? Also, were there any problems after doing this with MMS that I can fix if I were to encounter any? I've read people having problems with MMS afterwards and I use it pretty frequently so I don't want that to be like messed up. Thanks in advance for any replies.
Click to expand...
Click to collapse
First things first, you need to sda app unlock. Click on the link , go to post no.4 , download zip and follow what the post says.
http://www.spv-developers.com/forum/showthread.php?t=486
Second, The phone companies don't like it when you install unofficial roms on their phones, you can also find an official rom in the forum to place in your phone later if needed.
Third, some problems happen to some phones,it doesn't mean that you'll have the mms problem, but let me tell you something about this forum, we have the coolest people and they'll always help you when you need it. specially Stylez.
stylez said:
With regards to insurance if your on about your carrier then you just flash back to the original ROM, with regards to MMS issues i'm baffled as it's simple to set up and with thousands on thousands of users with no issues there seems to be a small ammount of users with issues, you can set up automatically via connection setup or even input all the info manually if you wish.
The ammount of extra you get with WM6.1 i bet that once flashed you will never want to see WM6 anywhere... And if not you just flash back to stock ROM.
Click to expand...
Click to collapse
I know that when I very first flashed my rom , I thought that it was a mayor upgrade.
rom not working
hey i try to put this rom on my htc dash, and it keeps saying that there is an error, it wont go past 3% without restarting the phone, what do i do
robdizzle414 said:
hey i try to put this rom on my htc dash, and it keeps saying that there is an error, it wont go past 3% without restarting the phone, what do i do
Click to expand...
Click to collapse
Please don't double post. Read my signature for guide to solve your problem
Good luck
Hi All,
Wonder anyone could built new ROM for ACer E100? Original ROM was having problems, Comm Manager always error.
Regards,
Calvin Lee
calvinljh said:
Hi All,
Wonder anyone could built new ROM for ACer E100? Original ROM was having problems, Comm Manager always error.
Regards,
Calvin Lee
Click to expand...
Click to collapse
You can use E101 Rom and soon will be updated
Edit: Try from this link http://hidemyass.com/files/xv4GF/ it is a 28008 build.
To flash just copy on Sdcard and rename it as flash.bin, during reset keep volume up pressed it start sd card update.
frrfba said:
You can use E101 Rom and soon will be updated
Edit: Try from this link http://hidemyass.com/files/xv4GF/ it is a 28008 build.
To flash just copy on Sdcard and rename it as flash.bin, during reset keep volume up pressed it start sd card update.
Click to expand...
Click to collapse
Hi Frrfba, Thanks bro, wonder you have original file for me to download, as a backup. incase anything happend.
Yea we have.. go ahead and flash
calvinljh said:
Hi Frrfba, Thanks bro, wonder you have original file for me to download, as a backup. incase anything happend.
Click to expand...
Click to collapse
hdubli said:
Yea we have.. go ahead and flash
Click to expand...
Click to collapse
Hi Hdubli, can I have download link please,
http://hidemyass.com/files/xv4GF/ there you can download build 28008 for E100.
The flash for me was alright. Some notes though: the setup of Windows isn't working 100%, it seems to freeze at some point and a dropdownbox wasn't clearly shown. Also, the screen isn't used 100%: pixels at the side aren't used. Also, there seems to be a margin for the letters, as some letters at the edge (still in the active area though) seem to fall off.
edit: seems like something went wrong. I get the top bar showing the icons, but the yellow/orange Windows logo doesn't disappear. Have to do a hard reset I guess.
edit2: did a hard reset and this time I disconnected the phone from computer. Everything worked fine now, except that the outside pixels (about 5 on each side) are still not used. But the dropdownboxes all showed alright and it booted alright and installed extrom alright . Sry for the confusion, very good job on the ROM! Will test some more .
TheEvilVirus said:
http://hidemyass.com/files/xv4GF/ there you can download build 28008 for E100.
The flash for me was alright. Some notes though: the setup of Windows isn't working 100%, it seems to freeze at some point and a dropdownbox wasn't clearly shown. Also, the screen isn't used 100%: pixels at the side aren't used. Also, there seems to be a margin for the letters, as some letters at the edge (still in the active area though) seem to fall off.
edit: seems like something went wrong. I get the top bar showing the icons, but the yellow/orange Windows logo doesn't disappear. Have to do a hard reset I guess.
edit2: did a hard reset and this time I disconnected the phone from computer. Everything worked fine now, except that the outside pixels (about 5 on each side) are still not used. But the dropdownboxes all showed alright and it booted alright and installed extrom alright . Sry for the confusion, very good job on the ROM! Will test some more .
Click to expand...
Click to collapse
To correctly have a good "start" after first rebbot, keep pda disconnetcted from everything.
After calibrate screen, extrom install all the cabs in the rom and after reboot it works good everything.
Keep in kind that the rom is tested (in italian) for 3 weeks withou any problems, let us know if need help.
ciao
Everything works fine for me too now. Thank you for the ROM, great job. Love the new build, it's much finger friendlier!
hdubli said:
Yea we have.. go ahead and flash
Click to expand...
Click to collapse
bro, can upload original e100 rom ? pls help
Hmm there is a problem with ActiveSync: the device doesn't always want to connect. The computer says it is not connected, but the device says it is. After some time or after trying to disconnect, the device just freezes. Annoying .
edit:.
Man hate this. It's really the device, tried 3 computers and they all refuse the connection. They say connecting and then disconnected, while the device thinks it's connected. Really odd, as it worked flawlessly before! Did a clean install and still not working!
TheEvilVirus said:
Hmm there is a problem with ActiveSync: the device doesn't always want to connect. The computer says it is not connected, but the device says it is. After some time or after trying to disconnect, the device just freezes. Annoying .
edit:.
Man hate this. It's really the device, tried 3 computers and they all refuse the connection. They say connecting and then disconnected, while the device thinks it's connected. Really odd, as it worked flawlessly before! Did a clean install and still not working!
Click to expand...
Click to collapse
Bro, this is bug issue, never flash your ROM before you ensure you get your original WWE ROM as default.....
Most importan part, no one is response when my first post, and "they" always told to "flash it, any problem is advise". <--- this part is very funny.
Not sure what you mean calvin, but anyway I reflashed with this custom ROM and it works again. No clue what changed, as a clean boot didn't help. But I'm happy again. And in case something happens, I still have the original ROM so not much risk for me.
edit: ooh no not again. After the first night, it was screwed again. Can't connect anymore :S. Hmm maybe I should go back to default then
TheEvilVirus said:
Not sure what you mean calvin, but anyway I reflashed with this custom ROM and it works again. No clue what changed, as a clean boot didn't help. But I'm happy again. And in case something happens, I still have the original ROM so not much risk for me.
edit: ooh no not again. After the first night, it was screwed again. Can't connect anymore :S. Hmm maybe I should go back to default then
Click to expand...
Click to collapse
Are You using Xp, Vista or else?
Can You check if ActiveSYnc is disconnected when screen goes black (timeout on backlight)? Don't let that Windows Mobile adjust backlight but set it!
In my case never found this kind of problem, but I see in various forum that 6.5 build in some case goes with this problem, for example I got that situation with Vista and with original rom 21840 build.
Apologies for the slightly off topic post, but I don't suppose you guys know of any updated ROMs for the beTouch E200 do you? Would like to get an updated version of WM6.5 on this thing...
The problem is that the computer (tried both Vista and Windows 7) doesn’t connect, while the device says it is connected. Then nothing happens, except that the device freezes after some time or says that any program I want to run isn’t a valid PPC application :S. After a reset everything is fine again, except that I can’t use activesync. This both happens with USB and Bluetooth connection. The connection is also lost when I power off the phone manually. But that rarely happens: it always freezes before I even get to that point and then it doesn’t respond to anything.
Also, when I unplug the device before it freezes, I get an ARM error saying I need to go to some specific memory address or ARM will break. If I go to that address, the phone freezes with screen off, if I let the ARM break (what the...?!) it freezes with screen on .
I just flashed back to original ROM. The first sync is alright. If it stays alright, then definitely the custom ROM can be 'blamed'. If no further is heard, then everything is fine again with original ROM.
TheEvilVirus said:
The problem is that the computer (tried both Vista and Windows 7) doesn’t connect, while the device says it is connected. Then nothing happens, except that the device freezes after some time or says that any program I want to run isn’t a valid PPC application :S. After a reset everything is fine again, except that I can’t use activesync. This both happens with USB and Bluetooth connection. The connection is also lost when I power off the phone manually. But that rarely happens: it always freezes before I even get to that point and then it doesn’t respond to anything.
Also, when I unplug the device before it freezes, I get an ARM error saying I need to go to some specific memory address or ARM will break. If I go to that address, the phone freezes with screen off, if I let the ARM break (what the...?!) it freezes with screen on .
I just flashed back to original ROM. The first sync is alright. If it stays alright, then definitely the custom ROM can be 'blamed'. If no further is heard, then everything is fine again with original ROM.
Click to expand...
Click to collapse
Hi TheEvilVirus, can I know where you download the original WWE ROM?, I need as my backup too. thanks thanks.
I'm sorry, can't give you the location . But if you might need it, maybe something can be arranged .
TheEvilVirus said:
I'm sorry, can't give you the location . But if you might need it, maybe something can be arranged .
Click to expand...
Click to collapse
Hi, may I know what does it mean? How can it be arranged? as in?
Just PM Me .
TheEvilVirus said:
Just PM Me .
Click to expand...
Click to collapse
Hi, may I know what does it mean? How can it be arranged? as in?
HI im having some very big problems with my tilt2. I can teather it fine but for some reason after a day or two i get the remote party has ended the connection, and no matter what i do to it, weather it be uninstall the script and speed patch and reinstall it, it wont help. so i have to format the phone and load it all over again and it works fine for about 2 days tops. Anyone have any ideas why this is happening? I seem to be formatting this phone every 2 days just to get it to teather.
i had the same thing happen to my kaiser with the stock att rom what i did was flash the rom and radio. after that problem was gone never happened again. you can also try this http://forum.xda-developers.com/showthread.php?t=538874
i don't know if this is of any help to you. After you get the error message can you still connect with active sync?
nope
after the errormessage i cant connect on the internet at all, i have to formatt the phone and reload everything to get it to work again
Rom and radio
What rom and radio do you reccomend for the tilt2 thats stable
i remember getting that error on my blackjack, it was mostly because i let it idle and data disconnects when not in use. its not like its a stable connection. if you wanted that you buy the crappy little usb card.
tomfubarr said:
What rom and radio do you reccomend for the tilt2 thats stable
Click to expand...
Click to collapse
the rom i'm using right now is here http://forum.xda-developers.com/showthread.php?t=617142
and Radio 4.49.25.91 i found the link on the same page.
if you're new to flashing i suggest you go here first http://forum.xda-developers.com/showthread.php?t=550540 it helped me out alot
Possible solution
The above mentioned "idle" problem is more than likely your culprit. I had a similar problem as well with the stock ROM. I suggest using NRG's Leo ROM to fix this problem. There are other solutions, but they are pretty tech savvy ones. Plus, if you haven't flashed your ROM yet, dude, you don't know what you're missing. The whole reason we're here is to push our phone's to the limit as far as functionality is concerned. Stock ROM's don't even cut it. Give a new one a whirl, I promise you won't be disappointed, plus, your reformatting issue will be gone as well, just a heads up from someone who's been around, you know?
Stuck
OK i try to update rom and im stuck on 0% of the hard spl prog and wont do nothing then errors out
tomfubarr said:
OK i try to update rom and im stuck on 0% of the hard spl prog and wont do nothing then errors out
Click to expand...
Click to collapse
Is your phone "unlocked?"
tomfubarr said:
OK i try to update rom and im stuck on 0% of the hard spl prog and wont do nothing then errors out
Click to expand...
Click to collapse
For the Tilt2 you'll want to use the enablerapinew.cab file in the Hard SPL thread.