Related
Hi Folks,
I'm looking for an Original HTC Artemis Bootscreen an how to change it.
The T-Mobile Screen is ugly.
Can Anybody help me?
Thunderhawk36
Thunderhawk36 said:
Hi Folks,
I'm looking for an Original HTC Artemis Bootscreen an how to change it.
The T-Mobile Screen is ugly.
Can Anybody help me?
Thunderhawk36
Click to expand...
Click to collapse
use this file. just copy it in windows dir and soft-reset.
ai_99 said:
use this file. just copy it in windows dir and soft-reset.
Click to expand...
Click to collapse
Sorry, but i'm looking for the screen just before the welcome screen.
The one where the Rom Version is shown.
Thanks
Thunderhawk
Hmm.. how many times do ya actually reset your phone to look at that screen?
MasK said:
Hmm.. how many times do ya actually reset your phone to look at that screen?
Click to expand...
Click to collapse
Not very much times , but the pink T-Mobile Logo is going to nerve me.
Thunderhawk
Thunderhawk36 said:
Not very much times , but the pink T-Mobile Logo is going to nerve me.
Thunderhawk
Click to expand...
Click to collapse
getting on my nerves too.. want a nice bluefish over there... have figured it out?
Yep you need to flash a new rom because as far as I know thats the only way it can be changed since its written at the same time as the ROM. Tom's B&Bv3 has just changed mine from the o2 default to the HTC logo, ask him how he did it but I'm pretty sure you need a new ROM with the logo of your choice embedded.
PS: Don't think you can do the log seperately either but I'm sure a more knowledgable person will be along shortly
markquinton said:
Yep you need to flash a new rom because as far as I know thats the only way it can be changed since its written at the same time as the ROM. Tom's B&Bv3 has just changed mine from the o2 default to the HTC logo, ask him how he did it but I'm pretty sure you need a new ROM with the logo of your choice embedded.
PS: Don't think you can do the log seperately either but I'm sure a more knowledgable person will be along shortly
Click to expand...
Click to collapse
Totally not going for me.. just upgraded to wm6 and the new activesync... maybe that's the reason?
There was a way I heard of using the RUU and replacing a file with the new image you wanted for splash...
"Perhaps you should look at this thread: http://forum.xda-developers.com/viewtopic.php?t=12898.
There is a great program on there for converting pictures to .nb files and also a CAB which, when run, will change the boot images.
This does require putting the splash1.nb and splash2.nb files into the /windows/ directory before running MDA3_bootimage_changer2.CAB,
but if you want to just run a CAB file you can just edit that CAB and place your own created splash1.nb and splash2.nb files
in it with the location set as /windows/ (I tried it with WinCE CAB Manager and this way works as well)."
http://forum.xda-developers.com/showthread.php?t=231632
eppoeh said:
Totally not going for me.. just upgraded to wm6 and the new activesync... maybe that's the reason?
Click to expand...
Click to collapse
It does depend on the rom, B&B v1 & 2 didn't update my boot screen but v3 did so maybe you've got an old version? Are you actually using the B&B rom at all? Not all rom updates change the boot screen, it depends on the chef if they include em in the first place
markquinton said:
It does depend on the rom, B&B v1 & 2 didn't update my boot screen but v3 did so maybe you've got an old version? Are you actually using the B&B rom at all? Not all rom updates change the boot screen, it depends on the chef if they include em in the first place
Click to expand...
Click to collapse
B&B? Did i miss something?
Tried two ways:
1: making the splash1 and splash2
2: tried RUU updating the splash, but fails, think it's the new activesync.
Did i mention that i'm trying this on a htc p3300?
Sorry, B&B is Black & Blue. Its the ROM that Tom Codon has been releasing and updating for the P3300\Artemis\Orbit.
Can be found here: http://forum.xda-developers.com/showthread.php?t=314568
http://www.4shared.com/file/19395089/5971579/Upgrade_HTC_First_Splash.html
dopod/HTC/O2/Orange/T-Mobile Boot Screen
LINK:http://www.aray.cn/?p=1362
zrays said:
[IMAGE]
dopod/HTC/O2/Orange/T-Mobile Boot Screen
LINK:http://www.aray.cn/?p=1362
Click to expand...
Click to collapse
Can somebody please explain the chinese over there? Or give another diescription?
Getting the message: "The image file is corrupted. Please check your Update utility"
eppoeh said:
Getting the message: "The image file is corrupted. Please check your Update utility"
Click to expand...
Click to collapse
CID lock was back? Did a hard reset, unlocked again.. now i can flash again
still no custum bootscreen though
eppoeh said:
CID lock was back? Did a hard reset, unlocked again.. now i can flash again
still no custum bootscreen though
Click to expand...
Click to collapse
still no image... bad splash.nb i guess... seeing nice colored rows now (green to black)
eppoeh said:
still no image... bad splash.nb i guess... seeing nice colored rows now (green to black)
Click to expand...
Click to collapse
WOOT, Finally, i got things running
How i did it:
search the forum for: "3-splash-screens.txt"
do step 2 (might run it in a dos box, to see errors)
search the forum for: "dutty's good NBH tool v1.1"
make the nbh file
flash it into the phone
Dudes Guys
ZRAYS give you the link on post 14.
Just download the right file depending on the logo you want.
Weblink : http://www.aray.cn/?cat=34
zip files are:
P800-logo-dopod.rar
P800-logo-HTC.rar
P800-logo-HTC-new.rar
P800-logo-O2.rar
P800-logo-Orange.rar
P800-logo-T-Mobile.rar
Shall I install it for you then...
Unzip the file go on folder etc... (backup your data, but this upgrade does destroy it) launch ROMUpdateUtility.exe
..wait and smile.
i tried to upgare my bootloader
with the black edition but when i start the rom upgrade it asked me what boot loader i have
so i had 1.01
when i give that option it tells me to run the rom only with mityy
but i saw an option in the rom upgrade that say force spl so i choos that option and after few second it finished and i see i have 1.13 oli
so it works that way because i didnt peek version in the rom upgrade i just peek the force spl
????
yes, it worked... as you can tell BY THE FACT YOUR PHONE IS STILL OK... why the hell did you waste YOUR TIME AND OURS by posting a whole ****ing topic telling the world "whoopee my flash succeeded because I followed instructions."
sorry man!"'
but after idid it my phone some times fast and in the begining it slow
somthing hapend?
do i need to do somthing now?
Yea, And if you would have read the Hard SPL thread or the Upgrade Guide by MrVanx you would have known what to do! I guess it's good someone like Olipro took the time to create this!
bubu23 said:
sorry man!"'
but after idid it my phone some times fast and in the begining it slow
somthing hapend?
do i need to do somthing now?
Click to expand...
Click to collapse
nope... you don't need to do anything at all, that's completely in your head.
yes but in the tread how to make hard spl it say simply if you have
1.01 then choose the first(blue)
when i choose it it tell me that i cant continue that i need to do it with mitty
but i didnt choose the boot loader i have i just choose the force sspl then it worked i hope
bubu23 said:
yes but in the tread how to make hard spl it say simply if you have
1.01 then choose the first(blue)
when i choose it it tell me that i cant continue that i need to do it with mitty
but i didnt choose the boot loader i have i just choose the force sspl then it worked i hope
Click to expand...
Click to collapse
IT WORKED, IT WORKED, IT WORKED, IT WORKED DOT ****ING COM
stop worrying and move on with your life... christ
Olipro,
hi,
I flash with LVSW's full update with 1.13Oli SPL, During the first screen I select Force SSPL. After flash the ROM I got white backgroud on Today's screen. I read through few people's experience with white background and try to fix it. Nothing works so I flash the OS only upgrade. The upgrade stop in middle of flashing. Later I discover the DL files were bad. Now, my 8525 bootup into 3 color screen with:
herm 1.13Oli screen. No activeSync connection..... In XP I can see the MobileDevice, but nothing within the folder.
Is it my device is now brick??
Any help will be appreciate.
Penske MB said:
hi,
I flash with LVSW's full update with 1.13Oli SPL, During the first screen I select Force SSPL. After flash the ROM I got white backgroud on Today's screen. I read through few people's experience with white background and try to fix it. Nothing works so I flash the OS only upgrade. The upgrade stop in middle of flashing. Later I discover the DL files were bad. Now, my 8525 bootup into 3 color screen with:
herm 1.13Oli screen. No activeSync connection..... In XP I can see the MobileDevice, but nothing within the folder.
Is it my device is now brick??
Any help will be appreciate.
Click to expand...
Click to collapse
go to the Hard-SPL thread, download the new Hard-SPL.
when flashing, select 1.11 and tick Hard-SPL (or don't, doesn't really matter).
go through the flash, let it update your SPL.
now, with 1.30, flash the latest LVSW WM6 ROM, or any other
Hi,
Thx for the fast response.
I have DL your newest Hard-SPL V4 version 1.30Oli. When I run the update it shows error (264) connection. No matter what, it will not update.
I have remove and reinstall activesync, but XP will find the device, but no activesync connection.
What should I di next??
THX
Olipro said:
go to the Hard-SPL thread, download the new Hard-SPL.
when flashing, select 1.11 and tick Hard-SPL (or don't, doesn't really matter).
go through the flash, let it update your SPL.
now, with 1.30, flash the latest LVSW WM6 ROM, or any other
Click to expand...
Click to collapse
Penske MB said:
Hi,
Thx for the fast response.
I have DL your newest Hard-SPL V4 version 1.30Oli. When I run the update it shows error (264) connection. No matter what, it will not update.
I have remove and reinstall activesync, but XP will find the device, but no activesync connection.
What should I di next??
THX
Click to expand...
Click to collapse
put a full LVSW NBH (as HERMIMG.nbh) on a MicroSD card and put it in your Hermes
When I power on 8525, it just show 3 colors screen. OS will not boot, it just star at 3 colors screen. How can I run the files Under MicroSD card?? Or the device will automatically run the NBH??
THX
Olipro said:
put a full LVSW NBH (as HERMIMG.nbh) on a MicroSD card and put it in your Hermes
Click to expand...
Click to collapse
Penske MB said:
When I power on 8525, it just show 3 colors screen. OS will not boot, it just star at 3 colors screen. How can I run the files Under MicroSD card?? Or the device will automatically run the NBH??
THX
Click to expand...
Click to collapse
call it HERMIMG.nbh and it will
Hi,
It is starting now and I will post the result soon. If it works, I will definitely send you my donation!!!
Olipro said:
call it HERMIMG.nbh and it will
Click to expand...
Click to collapse
Oli
Thanks foe all your help. I have kept my promise. Please chech youe Paypal account
Now, can you help me why I still have the white screen on Today screen??
thx
Penske MB said:
Thanks foe all your help. I have kept my promise. Please chech youe Paypal account
Now, can you help me why I still have the white screen on Today screen??
thx
Click to expand...
Click to collapse
If you read the forum thread associated with the newest LVSH this is a known problem and several solutions have been suggested - read the post and try the suggestions.
----------
Penske MB said:
Thanks foe all your help. I have kept my promise. Please chech youe Paypal account
Now, can you help me why I still have the white screen on Today screen??
thx
Click to expand...
Click to collapse
thanks very much... much appreciated.
have you tried going to the today screen item in settings and manually setting a today image?
The problem is that...
when i click START - SYSTEM - SCREEN - ALIGN SCREEN...
it freezes when it shows the first 'star' where you have to align. (the star at the centre of the screen when you press align screen)
Is there a fix or patch on this?
It's happening on most ROMs i put on my SPV M3100...
apart from the official rom (which is boring compared to other cooked roms).
Thanks
Are you using Roms with FTouchflo in it?
gerald_s said:
Are you using Roms with FTouchflo in it?
Click to expand...
Click to collapse
Yeah, I experienced the same thing with FTouchflo installed.
the answer is here:
http://forum.xda-developers.com/showpost.php?p=1745832&postcount=93
gerald_s said:
Are you using Roms with FTouchflo in it?
Click to expand...
Click to collapse
No... :S ive not got ftouchflo installed.
Can you please give more details about your device? Bootloader, ROM name (the one you are using now)... It will help troubleshoot your problem.
i assume it works when you first have to allign it, after a flash...
am i right?
if yes then it probably has to do smth. with the programs in your extended rom that get installed on the first boot
softonic123 said:
i assume it works when you first have to allign it, after a flash...
am i right?
if yes then it probably has to do smth. with the programs in your extended rom that get installed on the first boot
Click to expand...
Click to collapse
Yes I think you are right because with I can a align the screen infinite times with the original WM6 Hermes ROM... but with any other ROM e.g. Shwaps or TNT or Black ROM I can only align it once... just after putting the ROM on. But i know for sure its not FTouchFlo as I do not have that installed.
KarhU said:
Can you please give more details about your device? Bootloader, ROM name (the one you are using now)... It will help troubleshoot your problem.
Click to expand...
Click to collapse
I am using the WM6 Hermes Official ROM
only becuase thats the only ROM i can re-align my device when it goes out of alignment...
tabla said:
I am using the WM6 Hermes Official ROM
only becuase thats the only ROM i can re-align my device when it goes out of alignment...
Click to expand...
Click to collapse
Later Schap's ROMs (4.20 and 4.22) and some other cooked ROMs contain FTouchFlo, FTouchFlo is also contained in various Touch Cubes installations for Hermes - even commercial Touch Commander contains it. Be sure not to have any of these installed. That might be the culprit. The behavior you describe seems to be FTouchFlo - after you click the first star, the screen does not react, but the buttons work, functionality of screen returns after a soft reset. It can also be a different problem, but we need to single FTouchFlo out completely before digging deeper.
KarhU said:
Later Schap's ROMs (4.20 and 4.22) and some other cooked ROMs contain FTouchFlo, FTouchFlo is also contained in various Touch Cubes installations for Hermes - even commercial Touch Commander contains it. Be sure not to have any of these installed. That might be the culprit. The behavior you describe seems to be FTouchFlo - after you click the first star, the screen does not react, but the buttons work, functionality of screen returns after a soft reset. It can also be a different problem, but we need to single FTouchFlo out completely before digging deeper.
Click to expand...
Click to collapse
yes I am 100% sure anything with touchflo is not installed
e.g. the cube.. touch flo... etc
And yes it is exactly how u desribed about ... if you soft reset if just returns to the today screen. its just my SPV m3100 keeps on moving out of alignment... i tried to follow the instructions on some forums to get the screen alignment to stop but i dont seem to get them...
but anyway... thanks
use file explorer to go to \Windows\Startup. Rename this to \Windows\Startup-off and create a new folder Startup (now empty)
Restart.
Use align screen without problems, reverse what you did with the Startup programs.
I will bet you this works for you. One of those programs that start automatically (But do not show up in the task manager) stops your align screen from work.
disable touchflow
I've had the same problems with the screen allignment.
After disabling touch flow the problem was gone
Can someone please help me. I have a T-Mobile Branded TP2. I always used ENERGY Rom and I have used to get rid of that dumb t-mobile splash screen. Now I need to send my phone back to T-Mobile for warranty and I cannot fully get my splash screen back.
I have used the various T-Mobile splash screens avail from this forum, and what keeps happening is the very first screen is fine, then when the Radio and Rom information shows it's the changed splash then it goes back to the t-mobile boot up animation.
I have tried flashing different roms with splash screens I tasked 29 a couple times, but that radio version screen wont change back to the t-mobile likes it has in the past.
nightphobia said:
Can someone please help me. I have a T-Mobile Branded TP2. I always used ENERGY Rom and I have used to get rid of that dumb t-mobile splash screen. Now I need to send my phone back to T-Mobile for warranty and I cannot fully get my splash screen back.
I have used the various T-Mobile splash screens avail from this forum, and what keeps happening is the very first screen is fine, then when the Radio and Rom information shows it's the changed splash then it goes back to the t-mobile boot up animation.
I have tried flashing different roms with splash screens I tasked 29 a couple times, but that radio version screen wont change back to the t-mobile likes it has in the past.
Click to expand...
Click to collapse
Does the official T-Mobile rom not solve this?
cjm1979 said:
Does the official T-Mobile rom not solve this?
Click to expand...
Click to collapse
No it does not. It normally does and I tried it a few times, with no luck
The official T-Mobile rom should do it, i have done it a few times already, but if is not working, here you go...
StefanB86 said:
The official T-Mobile rom should do it, i have done it a few times already, but if is not working, here you go...
Click to expand...
Click to collapse
Thanks, Tried that already, and again. Still the same thing. It's really weird that it's only the Radio/Rom info screen that does it.
Haha I had to do this too, don't freak out.
Ok first you have to download the stock 6.5 ROM from T-Mobile first. Use your IMEI and get it.
Flash that ROM and you will get your splash screen back. If you want to change that rom into 6.1, you can search around the forums to find it.
Then after that its pretty simple, change radio, and SPL, and your done!
Kenichi
Kenchi* said:
Haha I had to do this too, don't freak out.
Ok first you have to download the stock 6.5 ROM from T-Mobile first. Use your IMEI and get it.
Flash that ROM and you will get your splash screen back. If you want to change that rom into 6.1, you can search around the forums to find it.
Then after that its pretty simple, change radio, and SPL, and your done!
Kenichi
Click to expand...
Click to collapse
I have tried re-installing the t-mobile ROM several times with no positive results
Can you just follow the instructions here:
http://forum.xda-developers.com/showthread.php?t=576703
And use a copy of the T-Mobile splash screen?
BigWopHH said:
Can you just follow the instructions here:
http://forum.xda-developers.com/showthread.php?t=576703
And use a copy of the T-Mobile splash screen?
Click to expand...
Click to collapse
Hmm Maybe I will try that and then go from there.
Thanks!
Nope. Ok back to the drawing board. I have never seen anything like this before
nightphobia said:
Nope. Ok back to the drawing board. I have never seen anything like this before
Click to expand...
Click to collapse
Are you sure you have tired it with the STOCK 6.5 T-Mobile ROM, 6.1 on the forums doesn't change the splash screen.
Kenichi
Kenchi* said:
Are you sure you have tired it with the STOCK 6.5 T-Mobile ROM, 6.1 on the forums doesn't change the splash screen.
Kenichi
Click to expand...
Click to collapse
Yes I am Positive, Downloaded it Directly from the T-Mobile wmupgrade site.
Like I said its weird because it looks like it changes the first part of the Splash because when you first turn it on you see the "Stick Together" logo, then it goes to the original TP2 logo when it displays the Radio and ROM Version, then it changes into the Tmobile animation.
Ok so I solved my Issue.
The TP2 I have now was a recent replacement from T-Mobile. I noticed that they had changed the Home key to a Key with the Windows Logo. So it gave me an Idea that maybe they changed the way the Splash Screens work as well. So after some research on this site I noticed that CDMA TP2's need 2 splash.np files. So I created 2 with the logo, and packaged them in a nbh file, and "BAM" all was good.
I have attached the nbh I created in case anyone else runs into this issue in the future.
Thank you everyone for your help!
nightphobia said:
Ok so I solved my Issue.
The TP2 I have now was a recent replacement from T-Mobile. I noticed that they had changed the Home key to a Key with the Windows Logo. So it gave me an Idea that maybe they changed the way the Splash Screens work as well. So after some research on this site I noticed that CDMA TP2's need 2 splash.np files. So I created 2 with the logo, and packaged them in a nbh file, and "BAM" all was good.
I have attached the nbh I created in case anyone else runs into this issue in the future.
Thank you everyone for your help!
Click to expand...
Click to collapse
This is the file I need, but the zip file needs a password!
I've been looking at this over on the HD2 sub-forum. the splash screen is 2 pics, not 1. the first that appears right away & then the one that appears when the ROM info is displayed.
http://forum.xda-developers.com/showthread.php?t=731614
xnifex said:
I've been looking at this over on the HD2 sub-forum. the splash screen is 2 pics, not 1. the first that appears right away & then the one that appears when the ROM info is displayed.
http://forum.xda-developers.com/showthread.php?t=731614
Click to expand...
Click to collapse
I am attaching the .nbh file that will put in the screen 2. Screen 1 and the animated screen are restored by the stock software install. The 24 bit BMP file is in the zip as well.
stevedebi said:
This is the file I need, but the zip file needs a password!
Click to expand...
Click to collapse
Thanks for posting another one, Not sure what was up but my zip didn't have a password.
I have the same issue... except with AT&T!
I have the same exact issue you were having, except I have AT&T. Does anyone have a .nbh to put the correct AT&T splash screen on (when the numbers show at the bottom of the screen during bootup)? Or does anybody have at least the correct image file, or have a slight idea of what to do so I can try to figure it out?
Hey everybody, I just recently bought a T-mobile touch pro 2 and I have to say, I love it.
Now, I switched ROM's and I did really enjoy it but I was receiving alot of issuse so I switched back and don't plan on changing again. But what I don't like is how every time I turn it on I get an annoying "Stick together" screen staring me in the face because of the t-mobile wm 6.5 stock rom.
Does anyone have any suggestion of what I could do to replace that with something alittle more stylish than a big pink square? haha
Oh, before I forget, I also uploaded Wajk's BootPackage v1.4 and I love it, but when it gets passed the diagnosis of the phone shouldn't it show the windows 7 boot? I'm just getting the standard Orange Microsoft one for WM 6.5. I was planning on doing a reg hack, but I didn't want to screw anything up. If anyone had any ideas on how to change these two settings I would greatly appreciate it.
twitch153 said:
Hey everybody, I just recently bought a T-mobile touch pro 2 and I have to say, I love it.
Now, I switched ROM's and I did really enjoy it but I was receiving alot of issuse so I switched back and don't plan on changing again. But what I don't like is how every time I turn it on I get an annoying "Stick together" screen staring me in the face because of the t-mobile wm 6.5 stock rom.
Click to expand...
Click to collapse
All I did to get rid of my "Stick Together" boot screen and turn it into a black "Touch Pro2" screen was flash a WWE stock ROM. These stock ROMs replace boot screens and radio-roms.
sumflipnol said:
All I did to get rid of my "Stick Together" boot screen and turn it into a black "Touch Pro2" screen was flash a WWE stock ROM. These stock ROMs replace boot screens and radio-roms.
Click to expand...
Click to collapse
See I did that before and I was getting services.exe errors, I don't really wanna replace the ROM I just want to get rid of the stock ROM, I just want to replace the boot screen.
twitch153 said:
See I did that before and I was getting services.exe errors, I don't really wanna replace the ROM I just want to get rid of the stock ROM, I just want to replace the boot screen.
Click to expand...
Click to collapse
All I did was flash the WWE stock ROM then flash a custom ROM. You don't need to stay on a stock ROM.
That is confusing! You don't want to replace the stock ROM, yet you want to get rid of it?
If you want a custom bootscreen (like what I have on both of my devices), here's my tutorial.
Thank you very much for that link! It was extremely helpful! I haven't tried anything out yet but I'm sure it will work. Thank you again, this will be a great birthday gift to me haha
hklm\software\htc\htcanimation
The Jack of Clubs said:
hklm\software\htc\htcanimation
Click to expand...
Click to collapse
I think the OP is talking about the first and second level splash screens (right at boot and the "R G D" info screen).
sumflipnol said:
I think the OP is talking about the first and second level splash screens (right at boot and the "R G D" info screen).
Click to expand...
Click to collapse
No, the OP is referring to the Startup animation and the shutdown animation. That does solve one problem, but it still doesn's remove the beginning huge pink "Stick Together" square. I don't know where that would be located in registry but the other two images (Startup.gif and shutdown.gif) are located there.
sumflipnol said:
All I did was flash the WWE stock ROM then flash a custom ROM. You don't need to stay on a stock ROM.
That is confusing! You don't want to replace the stock ROM, yet you want to get rid of it?
If you want a custom bootscreen (like what I have on both of my devices), here's my tutorial.
Click to expand...
Click to collapse
Yeah...haha I realized that I meant to say that I wanted to remove the stock rom boot image, I apologize for the confusion, I actually read it myself and I got confused! haha
sumflipnol said:
I think the OP is talking about the first and second level splash screens (right at boot and the "R G D" info screen).
Click to expand...
Click to collapse
Whoops haha I didn't realize that I was the OP hahaha! XD Yeah, that's exactly what I'm talking about. Sorry, again, it's kinda late here and I know my mind doesn't usually think well too late haha
Does anyone know how to do it without HardSPL? I actually used it before and I don't really have the money to pay fod another use, seeing as I have no job haha
twitch153 said:
Does anyone know how to do it without HardSPL? I actually used it before and I don't really have the money to pay fod another use, seeing as I have no job haha
Click to expand...
Click to collapse
You mean you already used the stock SPL restore? If you did, I don't know how to get around it...
You need HSPL to flash the custom splash screens because they're unofficial/unsigned.
sumflipnol said:
All I did was flash the WWE stock ROM then flash a custom ROM. You don't need to stay on a stock ROM.
That is confusing! You don't want to replace the stock ROM, yet you want to get rid of it?
If you want a custom bootscreen (like what I have on both of my devices), here's my tutorial.
Click to expand...
Click to collapse
When I went into this tutorial and tried to open the "Flasing tools" It worked fine, but when I tried to execute the custom ROM that was in there, my virus protection said it was infected with a trojan virus. Any idea why it won't work for me?
twitch153 said:
When I went into this tutorial and tried to open the "Flasing tools" It worked fine, but when I tried to execute the custom ROM that was in there, my virus protection said it was infected with a trojan virus. Any idea why it won't work for me?
Click to expand...
Click to collapse
Are you talking about the "Rhodium RUU"? If so, that's a common issue with anti-virus software. I have to temporarily disable by McAfee security, unzip the file, obtain the RUU, and flash. Once I re-enable my anti-virus software, it detects the RUU as a trojan. So, you will have to either make an exception, or you will have to temporarily disable your anti-virus software.
Here is the "Touch Pro 2".nbh file I came upon If you could make the second one I would greatly appreciate it. By the way, do you know how you turn on the phone and after the boot the big orange screen pops up and says "Windows" do you happen to know how to replace that as well?
That's welcomehead.192.png in the SYS. Search and replace.
twitch153 said:
Here is the "Touch Pro 2".nbh file I came upon If you could make the second one I would greatly appreciate it. By the way, do you know how you turn on the phone and after the boot the big orange screen pops up and says "Windows" do you happen to know how to replace that as well?
Click to expand...
Click to collapse
Here you go!
For the orange "Windows" screen, I have a question: is it animated, or is it just a solid image?
If it's animated, I can PM you a .cab that can change it to the Windows 7 startup screen; otherwise, you can replace those with .gif files. If it's a solid image, you'll have to replace either the "welcomehead.png" or the "welcomehead.192.png" (I think the name depends on whether or not you're on a stock/custom ROM) in your phone's \Windows folder.
I remember there being a setting in Advanced Configuration Tool that lets you change these two, but I'm not sure.
Thank you very much for the files! I'll try and scrape up some money to use the HSPL, I figured out how to remove the orange "windows" screen, oddly enough I had both the welcomehead.png and welcomehead.192.png in my windows folder, I just used total commander and switched the image with another one of my choice, thanks for the help guys
Hard SPL should let you re-install it if its for the same IMEI number, had the same problem and it let me re-install onto the same handset. Only problem is if you have a new IMEI. Also you will be charged if you use the same IP address to re-install it. If you change the service provided IP then no problem... Or use a mates PC if they don't mind....
ultramag69 said:
If you change the service provided IP then no problem... Or use a mates PC if they don't mind....
Click to expand...
Click to collapse
Yeah, that's the problem, I do have a new IMEI because my older phone got damaged so I returned it and got a new one, but do you think it's possible if I download Hard-SPL off of my phone and then execute it off of my computer? Or do you think I could just disconnect my Ethernet cable so the program can't detect if it's already been used or not? I mean, it could be possible yes?