Related
OK I think I just did a stupid thing!
I thought that a Radio only upgrade didn't require a Hard Reset (i.e. to Factory defaults and losing all your local data / program installs).
So I went from 1.09 to 1.11, hit the 'reset' button on completion and the stupid thing did a hard reset!
So where did I go wrong - well I think it is because I did the radio upgrade as a standard upgrade just by running the normal update files with only the new radio ROM file present and no other ROM files.
What I didn't do was to enter the BootLoader manually first I left it all up to the RUU files to do the job :roll:
Is it this (not manually entering the bootloader first - like the Wiki tells you to - mind you it also tells you to hard reset) which caused the hard reset which was beyond my control :?:
I'm sure I've changed the Radio ROM only on my old BA without all this hassle - just can't remember what I did differently.
From what I remember, you are supposed to press the reset pin hole while pushing down on the ON/OFF button. This would cause it to soft reset according to the on-screen instructions, and it did on mine when I tried it. But of course, I also performed a backup to be on the safe side.
Really not my day today - Whilst reinstalling and going through reset cycles my Exec turned into a brick :shock:
Stuck at boot-screen with ROM versions showing
Hopefully the Wiki resolution to this one is going to work..
Ever wish you'd just left the thing alone
Whenever I've done a radio upgrade, I've simply pressed the reset button with the tip of the stylus - that's it.
I've done about 6 up/downgrades, I would guess, and not had any problems. I hope you get yours sorted out.
Cheers,
Steve.
StevePritchard said:
Whenever I've done a radio upgrade, I've simply pressed the reset button with the tip of the stylus - that's it.
Click to expand...
Click to collapse
At least I'm not going mad then - That's exactly what I did before this all went pear-shaped.
Did you upgrade whilst in the bootloader or just from WM5 running normally?
dpayea said:
Stuck at boot-screen with ROM versions showing
Hopefully the Wiki resolution to this one is going to work..
Click to expand...
Click to collapse
De-Bricked
dpayea said:
dpayea said:
Stuck at boot-screen with ROM versions showing
Hopefully the Wiki resolution to this one is going to work..
Click to expand...
Click to collapse
De-Bricked
Click to expand...
Click to collapse
Good to hear!
dpayea said:
StevePritchard said:
Whenever I've done a radio upgrade, I've simply pressed the reset button with the tip of the stylus - that's it.
Click to expand...
Click to collapse
At least I'm not going mad then - That's exactly what I did before this all went pear-shaped.
Did you upgrade whilst in the bootloader or just from WM5 running normally?
Click to expand...
Click to collapse
WM5 running normally - to be fair, it sometimes took a few attempts for the upgrade to "take", but once it was going, I've had no problems - glad to hear you manage to de-brick it.
Cheers,
Steve.
dpayea said:
dpayea said:
Stuck at boot-screen with ROM versions showing
Hopefully the Wiki resolution to this one is going to work..
Click to expand...
Click to collapse
De-Bricked
Click to expand...
Click to collapse
Good to hear!
i tried to upgare my bootloader
with the black edition but when i start the rom upgrade it asked me what boot loader i have
so i had 1.01
when i give that option it tells me to run the rom only with mityy
but i saw an option in the rom upgrade that say force spl so i choos that option and after few second it finished and i see i have 1.13 oli
so it works that way because i didnt peek version in the rom upgrade i just peek the force spl
????
yes, it worked... as you can tell BY THE FACT YOUR PHONE IS STILL OK... why the hell did you waste YOUR TIME AND OURS by posting a whole ****ing topic telling the world "whoopee my flash succeeded because I followed instructions."
sorry man!"'
but after idid it my phone some times fast and in the begining it slow
somthing hapend?
do i need to do somthing now?
Yea, And if you would have read the Hard SPL thread or the Upgrade Guide by MrVanx you would have known what to do! I guess it's good someone like Olipro took the time to create this!
bubu23 said:
sorry man!"'
but after idid it my phone some times fast and in the begining it slow
somthing hapend?
do i need to do somthing now?
Click to expand...
Click to collapse
nope... you don't need to do anything at all, that's completely in your head.
yes but in the tread how to make hard spl it say simply if you have
1.01 then choose the first(blue)
when i choose it it tell me that i cant continue that i need to do it with mitty
but i didnt choose the boot loader i have i just choose the force sspl then it worked i hope
bubu23 said:
yes but in the tread how to make hard spl it say simply if you have
1.01 then choose the first(blue)
when i choose it it tell me that i cant continue that i need to do it with mitty
but i didnt choose the boot loader i have i just choose the force sspl then it worked i hope
Click to expand...
Click to collapse
IT WORKED, IT WORKED, IT WORKED, IT WORKED DOT ****ING COM
stop worrying and move on with your life... christ
Olipro,
hi,
I flash with LVSW's full update with 1.13Oli SPL, During the first screen I select Force SSPL. After flash the ROM I got white backgroud on Today's screen. I read through few people's experience with white background and try to fix it. Nothing works so I flash the OS only upgrade. The upgrade stop in middle of flashing. Later I discover the DL files were bad. Now, my 8525 bootup into 3 color screen with:
herm 1.13Oli screen. No activeSync connection..... In XP I can see the MobileDevice, but nothing within the folder.
Is it my device is now brick??
Any help will be appreciate.
Penske MB said:
hi,
I flash with LVSW's full update with 1.13Oli SPL, During the first screen I select Force SSPL. After flash the ROM I got white backgroud on Today's screen. I read through few people's experience with white background and try to fix it. Nothing works so I flash the OS only upgrade. The upgrade stop in middle of flashing. Later I discover the DL files were bad. Now, my 8525 bootup into 3 color screen with:
herm 1.13Oli screen. No activeSync connection..... In XP I can see the MobileDevice, but nothing within the folder.
Is it my device is now brick??
Any help will be appreciate.
Click to expand...
Click to collapse
go to the Hard-SPL thread, download the new Hard-SPL.
when flashing, select 1.11 and tick Hard-SPL (or don't, doesn't really matter).
go through the flash, let it update your SPL.
now, with 1.30, flash the latest LVSW WM6 ROM, or any other
Hi,
Thx for the fast response.
I have DL your newest Hard-SPL V4 version 1.30Oli. When I run the update it shows error (264) connection. No matter what, it will not update.
I have remove and reinstall activesync, but XP will find the device, but no activesync connection.
What should I di next??
THX
Olipro said:
go to the Hard-SPL thread, download the new Hard-SPL.
when flashing, select 1.11 and tick Hard-SPL (or don't, doesn't really matter).
go through the flash, let it update your SPL.
now, with 1.30, flash the latest LVSW WM6 ROM, or any other
Click to expand...
Click to collapse
Penske MB said:
Hi,
Thx for the fast response.
I have DL your newest Hard-SPL V4 version 1.30Oli. When I run the update it shows error (264) connection. No matter what, it will not update.
I have remove and reinstall activesync, but XP will find the device, but no activesync connection.
What should I di next??
THX
Click to expand...
Click to collapse
put a full LVSW NBH (as HERMIMG.nbh) on a MicroSD card and put it in your Hermes
When I power on 8525, it just show 3 colors screen. OS will not boot, it just star at 3 colors screen. How can I run the files Under MicroSD card?? Or the device will automatically run the NBH??
THX
Olipro said:
put a full LVSW NBH (as HERMIMG.nbh) on a MicroSD card and put it in your Hermes
Click to expand...
Click to collapse
Penske MB said:
When I power on 8525, it just show 3 colors screen. OS will not boot, it just star at 3 colors screen. How can I run the files Under MicroSD card?? Or the device will automatically run the NBH??
THX
Click to expand...
Click to collapse
call it HERMIMG.nbh and it will
Hi,
It is starting now and I will post the result soon. If it works, I will definitely send you my donation!!!
Olipro said:
call it HERMIMG.nbh and it will
Click to expand...
Click to collapse
Oli
Thanks foe all your help. I have kept my promise. Please chech youe Paypal account
Now, can you help me why I still have the white screen on Today screen??
thx
Penske MB said:
Thanks foe all your help. I have kept my promise. Please chech youe Paypal account
Now, can you help me why I still have the white screen on Today screen??
thx
Click to expand...
Click to collapse
If you read the forum thread associated with the newest LVSH this is a known problem and several solutions have been suggested - read the post and try the suggestions.
----------
Penske MB said:
Thanks foe all your help. I have kept my promise. Please chech youe Paypal account
Now, can you help me why I still have the white screen on Today screen??
thx
Click to expand...
Click to collapse
thanks very much... much appreciated.
have you tried going to the today screen item in settings and manually setting a today image?
I had a problem with the password TWICE!! my P3600 does not recognize my password after i power off and on the device. i had to do a hard reset in order to use the device again, then i'd lost all my data. i am a Apple user so i did not back it up, actually i do not know how to sync my WM6 with my Apple.
now i do not use the password in fear that it may happen again. is this a bug with WM6? apparently a few people have experience this as well.
Hi,
it's a problem which happens if the device is reset before the change in the registry is written into the flashrom.
Turn the device off by holding the powerbutton down for about 10s, then you should be fine.
LIT
Lost_in_translation said:
Hi,
it's a problem which happens if the device is reset before the change in the registry is written into the flashrom.
Turn the device off by holding the powerbutton down for about 10s, then you should be fine.
LIT
Click to expand...
Click to collapse
i did not power off/on, or reset, the device right after i created the password. the password was working fine when the device goes into the sleep mode. in fact, i am sure the password was fine as well when i power off/on a couple of times. it just seems to happen randomly without a pattern.
your suggestion seems logical enough, but i know for sure it was LONG enough for it to update the registry.
Good, someone else with this problem. I posted this in Shaps rom thread on Monday but got no reply.
I flashed a standard WM5 Orange M700 up to Schaps new rom.
First i sim unlocked it.
Then hard SPL
Then flashed the ROM
Got everything set up and must have rebooted a few times in different ways after setting the password and then 1 time it just wouldnt accept the password.
Hard reset, did everything again and same thing. I set the password the first thing when i first booted the device this time though and since that i must have reset about 5 or 6 times without problem when installing things like Random Access and stuff you obviously have to reboot. Then again after half an hour or so after another soft reset and it locks me out.
I flashed to a dif WM6 rom after this and i havent heard that there has been an issue yet.
rjefferis said:
Good, someone else with this problem. I posted this in Shaps rom thread on Monday but got no reply.
I flashed to a dif WM6 rom after this and i havent heard that there has been an issue yet.
Click to expand...
Click to collapse
well, at least this is not a problem for you so far with WM6. i have WM6, ROM verions: 3.00.707.17, ROM date: 6/29/07
sfaguy said:
i do not know how to sync my WM6 with my Apple.
.
Click to expand...
Click to collapse
take a look @ Markspace.com
sfaguy said:
well, at least this is not a problem for you so far with WM6. i have WM6, ROM verions: 3.00.707.17, ROM date: 6/29/07
Click to expand...
Click to collapse
It was with WM6 that i was having the problem, it was Schaps latest WM6 ROM.
Windoze9t8 said:
take a look @ Markspace.com
Click to expand...
Click to collapse
thanks for th info. too bad it costs $39.99 just to sync it with Mac. I was hoping there is a free software out there.
sfaguy said:
well, at least this is not a problem for you so far with WM6. i have WM6, ROM verions: 3.00.707.17, ROM date: 6/29/07
Click to expand...
Click to collapse
try the official 3.00.707.18 from Australia New Zealand version. I haven't got this problem, since.
sfaguy said:
thanks for th info. too bad it costs $39.99 just to sync it with Mac. I was hoping there is a free software out there.
Click to expand...
Click to collapse
there is a free one. just go to sourceforge.net and search for it. i forgot what the name was...
tjlabais said:
there is a free one. just go to sourceforge.net and search for it. i forgot what the name was...
Click to expand...
Click to collapse
i go to the site you mentioned, there is one called Mac-Pocket PC Sync, but i do not know how to download it. would you give me some idea about how to do that. i would really appreciate that.
sfaguy said:
i go to the site you mentioned, there is one called Mac-Pocket PC Sync, but i do not know how to download it. would you give me some idea about how to do that. i would really appreciate that.
Click to expand...
Click to collapse
okay. I just reread your first post... you said you were not able to back up data...
for me, I use PIM Backup by dotFred because it backs up the PIM on storage card, and can be restored on any WM version using the same program. (i.e. between wm5 and wm6) PIM data would be contacts, messages, call logs, calendard, etc.
if you'd really need to sync your pocket-pc to mac, you can see this
http://www.eltima.com/products/syncmate/
the one at sourceforge is still under development...
tjlabais said:
okay. I just reread your first post... you said you were not able to back up data...
if you'd really need to sync your pocket-pc to mac, you can see this
http://www.eltima.com/products/syncmate/
the one at sourceforge is still under development...
Click to expand...
Click to collapse
thanks for the info. i just downloaded this free software. i can now sync my contact & calendar between my Mac and WM6.
i really appreciate your help!
tjlabais said:
okay. I just reread your first post... you said you were not able to back up data...
for me, I use PIM Backup by dotFred because it backs up the PIM on storage card, and can be restored on any WM version using the same program. (i.e. between wm5 and wm6) PIM data would be contacts, messages, call logs, calendard, etc.
if you'd really need to sync your pocket-pc to mac, you can see this
http://www.eltima.com/products/syncmate/
the one at sourceforge is still under development...
Click to expand...
Click to collapse
hey again,
i downloaded syncmate a few weeks ago, it works great. then today, it says my beta version expired and i should go to www.eltima.com to get the newer version. i tried but with no luck. i downloaded what appears to be the latest, yet whenever i start it up, i get the expired error again.
do you have any more info on this software? or anyone in this forum use this software to sync between Mac ans WM6?
i have the same "syncmate expired"-problem. I use HTC 3300 (WM6). It has worked for many weeks, but today i get this problem.
tholle
tholle_xda said:
i have the same "syncmate expired"-problem. I use HTC 3300 (WM6). It has worked for many weeks, but today i get this problem.
tholle
Click to expand...
Click to collapse
i thought this is a free software with no expiration date. the error suggested to go to their site for a newer version, yet there is none.
i am hoping someone in this forum may have a work around as it's nice to be able to sync between Mac and WM6
here is a solution: http://www.eltima.com/download/EltimaSyncMate.dmg
it works very well. i don't know why, but it works.
tholle
Hi,
How is it be possible to upgrade the radio versin to another version?
My version is not able to hook up on 3G connections or SIM card.
Is there a way to upgrade it? and extract from other memeber for share?
ofird said:
Hi,
How is it be possible to upgrade the radio version to another version?
My version is not able to hook up on 3G connections or SIM card.
Is there a way to upgrade it? and extract from other member for share?
Click to expand...
Click to collapse
never mind
ofird said:
Hi,
How is it be possible to upgrade the radio versin to another version?
My version is not able to hook up on 3G connections or SIM card.
Is there a way to upgrade it? and extract from other memeber for share?
Click to expand...
Click to collapse
Yes is possible.
Download a full rom (like the italian one).
Launch the full upgrade with the phone disconnected
kill the mirage client with the task manger
You will find the rom splitted in 3 files on the C:\ directory.
Copy the _phone.bin file somewhere.
Then relaunch the mirage client and choose to flash the pone part only with the above file.
You will need the smsung generic modem drivers (the ones for the i600 or i607 are ok) to flash the phone section.
hi,
in my case i780 connect on wifi but internet explorer don't work.
It only works when i an on data provider.
Thank you for that tip Solutor,
I will give it a try now.
BTW - is the Italian ROM newer then mine?
mine is -
PDA: i780DXHA1
PHONE: i780DXGL2
And, why if so, wy don't I install the italiam ROM as a whole (not just the radio part) and then add my languages?
and ...will it affect the Radio of the GPS as well?
Amazing!
You have solved my problem!
Thank you!
I have been working on this for a week now, and finally...you came up with it
3G is working and now even the GPS is showing some "living symoptoms" ( I still have to play with it more).
Cheers
Me too i have flashed the radio and the wifi works
I can now confirm that the device works flawlessly !
GPS hooks up in a few seconds (after an initial 5 minutes for the first time) and everything works superb! no third parties (port Splitter, GPSGate, etc.) required!
Soluter - you made my day!
The Solutor said:
Yes is possible.
Download a full rom (like the italian one).
Launch the full upgrade with the phone disconnected
kill the mirage client with the task manger
You will find the rom splitted in 3 files on the C:\ directory.
Copy the _phone.bin file somewhere.
Then relaunch the mirage client and choose to flash the pone part only with the above file.
You will need the smsung generic modem drivers (the ones for the i600 or i607 are ok) to flash the phone section.
Click to expand...
Click to collapse
Ive just tried to get the _phone part from the italian newer rom but as soon as i kill the mirage service all 3 files from the c:\ drive vanish too
Do you have any ideas as to what the problem could be?
thanks
J273 said:
Ive just tried to get the _phone part from the italian newer rom but as soon as i kill the mirage service all 3 files from the c:\ drive vanish too
Do you have any ideas as to what the problem could be?
thanks
Click to expand...
Click to collapse
Kill mirage from the process tab, not from the application tab.
Another way is flashing the whole italian rom, then flashing back the english one (as the one that is lying around is the pda part only)
BTW, I'm trying to upload somewhere the splitted rom, stay tuned!
ofird said:
You have solved my problem!
Thank you!
I have been working on this for a week now, and finally...you came up with it
3G is working and now even the GPS is showing some "living symoptoms" ( I still have to play with it more).
Cheers
Click to expand...
Click to collapse
I'm glad You find this tip helpfull
The Solutor said:
Kill mirage from the process tab, not from the application tab.
Another way is flashing the whole italian rom, then flashing back the english one (as the one that is lying around is the pda part only)
BTW, I'm trying to upload somewhere the splitted rom, stay tuned!
Click to expand...
Click to collapse
Ahh thats what ive been doing wrong...
Thanks ill give that a try now.
Thanks again
As promised the splitted rom:
http://www.megaupload.com/it/?d=ARUXWRCV
Finally manged to get the phone part but when i click the detect button it just stops on
'Waiting for device...'
and dont go any further...is this due to the modem driver not being installed?
Also do i need to kill activesync before ido the update?
Thanks
The Solutor said:
As promised the splitted rom:
http://www.megaupload.com/it/?d=ARUXWRCV
Click to expand...
Click to collapse
Thanks alot
J273 said:
Finally manged to get the phone part but when i click the detect button it just stops on
'Waiting for device...'
and dont go any further...is this due to the modem driver not being installed?
Also do i need to kill activesync before ido the update?
Thanks
Click to expand...
Click to collapse
I seem to be getting the same problem - J273 did you manage to resolve? I just want to update the phone part not pda. Thanks
mic_888 said:
I seem to be getting the same problem - J273 did you manage to resolve? I just want to update the phone part not pda. Thanks
Click to expand...
Click to collapse
Yeah...I had the phone on.
Make sure the phones switched off and then connect the cable.
J273 said:
Yeah...I had the phone on.
Make sure the phones switched off and then connect the cable.
Click to expand...
Click to collapse
Thanks for your quick reply. When you say turn the phone off do you mean switch to flight mode i,e, leave the device on? I did that but still get the waiting for device....
All I did was select the _phone file and click detect. Do I need to do anything else? Do I need select anything in the Loader section?? Sorry - I'm not finding as easy as flashing my HTC Touch!
no actually switch the phone off...select the phone part of the rom and then connect the phone and it should auto start flashing
J273 said:
no actually switch the phone off...select the phone part of the rom and then connect the phone and it should auto start flashing
Click to expand...
Click to collapse
Great thanks - just flashed the phone.
Ok, so I am a Newb, but I am a start guy... 153 IQ, was always top of my class - however I have no F**ng clue what the guys in the development and hacking section are talking about.
Basically, I have a TP2 for Tmobile that I would like to do something with... ANYTHING~! Preferable install a cooked WM6.5 rom, or a 6.1 rom with Manilla 2.5 for the time being. An android or Sense UI port would be nice as well.
Can someone please either help me get started by pointing my in the correct direction of a helpful sticky, because frankly its tough searching through threads like this:
"[JUL 13][APP][ALPHA4] Nitrogen 1.1 (music player for Windows Mobile)"
Any help would be appreciated by me, and other not so technically inclined individuals.
Thanks a ton!
http://thewingster.com/default.aspx they have a pic guide on how to install a cooked rom and also provide you with the rom
lilchip85 said:
http://thewingster.com/default.aspx they have a pic guide on how to install a cooked rom and also provide you with the rom
Click to expand...
Click to collapse
Guys like you Rock!
llllllllll said:
Guys like you Rock!
Click to expand...
Click to collapse
lol thanks. also click on my sig for softwares. it's always being updated with new apps that you might like for your tp2
lilchip85 said:
lol thanks. also click on my sig for softwares. it's always being updated with new apps that you might like for your tp2
Click to expand...
Click to collapse
Thanks, I checked out the ROM u use and it looks smooth, but I want Manilla
http://forum.xda-developers.com/showthread.php?t=560320
Im trying to mess with this one here. The .exe install sounds simple - but any pointers to doing this?
Also, I dont sync my contacts with Outlook - is there a preferred way to back them up otherwise?
llllllllll said:
Ok, so I am a Newb, but I am a start guy... 153 IQ, was always top of my class - however I have no F**ng clue what the guys in the development and hacking section are talking about.
Basically, I have a TP2 for Tmobile that I would like to do something with... ANYTHING~! Preferable install a cooked WM6.5 rom, or a 6.1 rom with Manilla 2.5 for the time being. An android or Sense UI port would be nice as well.
Can someone please either help me get started by pointing my in the correct direction of a helpful sticky, because frankly its tough searching through threads like this:
"[JUL 13][APP][ALPHA4] Nitrogen 1.1 (music player for Windows Mobile)"
Any help would be appreciated by me, and other not so technically inclined individuals.
Thanks a ton!
Click to expand...
Click to collapse
Welcome to forums
This is the official XDA how to flash for noobs:
http://forum.xda-developers.com/showthread.php?t=550540
Read, Search, Respect and Enjoy!
Good luck,
Will the Tom Rhodium Manilla -> http://forum.xda-developers.com/showthread.php?t=560320 Work in landscape mode?
llllllllll said:
Will the Tom Rhodium Manilla -> http://forum.xda-developers.com/showthread.php?t=560320 Work in landscape mode?
Click to expand...
Click to collapse
i don't think it will but it won't hurt to test it out. i hate not having landscape but i seem to be getting used to it.
hmm.. I think the energy rom should... ill give it a shot, worst case, i can just reflash to stock 6.1 right?
Im stuck at this part LOL
http://thewingster.com/howtohspltp2.aspx
Cant install active sync on vista
I tried running the hardspl, but it completed in 10 sec and all it did was restrart my phone
It´s better to try the Wiki instructions as they are backed up by a lot of members
Activesync is for XP computers only!!
For Vista or S7ven use Windows Mobile Device center
llllllllll said:
Im stuck at this part LOL
http://thewingster.com/howtohspltp2.aspx
Cant install active sync on vista
I tried running the hardspl, but it completed in 10 sec and all it did was restrart my phone
Click to expand...
Click to collapse
i had the windows mobile device center running and it said my phone was connected. plug in the usb and put active sync on the device and the wmd will show your phone is connected. i was confused also since it said active sync failed.
as for the hardspl
*Go into BootLoader Mode (do a Soft Reset while holding the "volume down" key on the left side of the device. Keep holding the "volume down" key until you see tricolour screen which is the bootloader mode, then release it) and verify the screen shows 0.85.OliNex, which is the HardSPL version*
orb3000 said:
It´s better to try the Wiki instructions as they are backed up by a lot of members
Activesync is for XP computers only!!
For Vista or S7ven use Windows Mobile Device center
Click to expand...
Click to collapse
what he said
lilchip85 said:
i
as for the hardspl
*Go into BootLoader Mode (do a Soft Reset while holding the "volume down" key on the left side of the device. Keep holding the "volume down" key until you see tricolour screen which is the bootloader mode, then release it) and verify the screen shows 0.85.OliNex, which is the HardSPL version*
Click to expand...
Click to collapse
How exactly do I do a soft reset? What else do I hold down aside from the volume down key?
llllllllll said:
How exactly do I do a soft reset? What else do I hold down aside from the volume down key?
Click to expand...
Click to collapse
(if you have tmobile it's the lil circular slot on the right) just power off your device when you turn it on just hold the volume down
I did that and its already showing SPL - ).85.01 olinex
I didnt think the process worked as it said it takes 10 min, and it took about 6 seconds.
Is this all i needed to do and can i start the rom flash now?
llllllllll said:
I did that and its already showing SPL - ).85.01 olinex
I didnt think the process worked as it said it takes 10 min, and it took about 6 seconds.
Is this all i needed to do and can i start the rom flash now?
Click to expand...
Click to collapse
it says 10 mins but it doesn't take that long. now you can flash away. i've flashed my phone like 3 times and ended with the touch it rom. i never tried tom codon rom. if you do try and landscape works let me know!
also you only need to hardspl once. so if you get tired of the rom just plug it in. run the customruu.exe and flash the new rom but ofcourse follow the instructions on the site lol