Hello,
After a flash of GenY 1.1 by MTTY (and internal storage) the flash stop at 71% with a 226 error.
Now I can't flash HardSPL (flash goes to 100% but the version of my HSPL in bootloader still the same !). I can't flash on official rom (stop at 61% with same error code).
Anyone now if it's possible to do something for that ?
Thanks
PS : sorry for my english !
I can never change my hardspl without using the jumpspl technique as in link below for hardspl 1.24
http://forum.xda-developers.com/showthread.php?t=408621
It always stays the same despite reaching 100%
HTH
Bixx
Try:
http://forum.xda-developers.com/showpost.php?p=1518700&postcount=11
Hi !
I've tried to flash HSPL 1.24 but like my phone doesn't boot, I can't copy and execute JumpSPL.exe and the RomUpdateUtility can't flash the HSPL.
JR_de > i's for the trinity, the 1.20 Olipro it's not for diamond, and I'm no SuperCID.
I've tried with 1.40 Olinex Unsigned with mtty command in your link but still the same error when I flash an official rom (2.03.406....)
thanks for your answers
try to change the usb port from pc and still try yr phone is not brick
I try with another usb port, and another computer, the results it's the same !
tom62 said:
I try with another usb port, and another computer, the results it's the same !
Click to expand...
Click to collapse
ever tried to change the usb cable?
Yes I try to flash with a second usb cable....
I believe there is no solution !
OS?
On what OS are you trying this?
Windows XP / Vista / 7 32bit? 64Bit?
Try this: http://forum.xda-developers.com/showthread.php?t=578231
is there a bootble ROM on it?
if so , download a stock image from HTC and copy to top level of your 4GB
reset and press the enter and back buttons
follow on screen instructions
i recomend that you flash like this, much safer
good luck
hello, happy new year everybody !!
there is no bootble ROM on my diamond.
I have no access to the internal storage, I can't copy a nbh file on it.
I try to flash an hspl with change .nbh after click on the first "next" in the customRuu, but the version of the hspl always doesn't change, and error 260 when I flash an OS rom...
nobody has a solution ?!
Try and flash back to stock SPL, check my sig
after that, try and flash stock OS
if either fail, send to HTC
Good Luck
Badwolve1
Related
Hello everybody, actually I flashed my trinity with rom Ausdim WM6.1 V3 LIGHT , but i found a problem with this rom, in fact, in my device, i can not install or execute any other application, so i tried to flash an other rom (Mary SL 3.7) but in vain, i tried with SSPL-Trin but i coudn't execute it from my pda ( a problem of a security certificate or something like that) and when I push power+Camera+reset , i can access to the bootloader spl-1.07.0000 but when i try to flash , the operation stops at 2% and i receive an error : file corrupted. I tried with other cooked roms but i have always the same problem. An the last thing i've tried was trying to flash system from the minisd card, i formatted it to fat32 an i put the file TRINIMG.nbh but when i boot in bootoader it shows a message "loading..." then it shows a number "00068002", so could you please help me and thank you
=======Problem solved==========
Hi!
Can you please post how you solved the problem, to help other people that maybe have this situation in a future?
Thanks!
Actually i realized that i coudn't flash any other rom with the original SSPL, so i had the idea to try with the original htc wm5, and it worked.
you really need to flash hard-spl as well.. you're playing with fire
Mirror for this version.
http://rapidshare.com/files/1848450...igned_Diamond_52.51.25.26_1.09.25.23_Ship.exe
What changes had been made in version 2.03?
Is it safe enough to use
can i ask u were u getting all these from ?
tabarda said:
Mirror for this version.
http://rapidshare.com/files/1848450...igned_Diamond_52.51.25.26_1.09.25.23_Ship.exe
Click to expand...
Click to collapse
Hey Tuga Men.
Did you test it?
pacharru said:
Hey Tuga Men.
Did you test it?
Click to expand...
Click to collapse
Hi friend,
No, install the English version 2:03
http://forum.xda-developers.com/showthread.php?t=471699
tabarda said:
Mirror for this version.
http://rapidshare.com/files/1848450...igned_Diamond_52.51.25.26_1.09.25.23_Ship.exe
Click to expand...
Click to collapse
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.93 Olinex SPL, this is problem?
Where can i find the latest working English or Europian 2.03 version?
misa_reg said:
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.93 Olinex SPL, this is problem?
Where can i find the latest working English or Europian 2.03 version?
Click to expand...
Click to collapse
the same to me
misa_reg said:
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.93 Olinex SPL, this is problem?
Where can i find the latest working English or Europian 2.03 version?
Click to expand...
Click to collapse
You already have it.
There is a problem installing these ROMs via an Activesync connection. You need to flash from Internal Storage. Also, make sure you have HardSPL installed before you flash.
Instructions for flashing from internal storage:
Extract the RUU_Diamond_HTC_Europe_2.03.401.2_Radio_Signed_Dia mond_52.51.25.26_1.09.25.23_Ship.exe file to a new directory on your PC
Find the RUU_signed.nbh file in this new directory and rename it to Diamimg.nbh
Copy Diamimg.nbh to the root of Internal Storage
Hold in the volume down button + the back button (thats the top right button on the front to the right of the big middle jog control) + soft reset
Follow instructions on screen
When the process is complete (it will say UPDATE SUCCESS) then reset
Thank You! Great! Updated succesfull, but this is new update method for me!
What is the differend betwen 2.03.401.2 and 2.03.456.2 ?
Any other mirrors available?
misa_reg said:
Thank You! Great! Updated succesfull, but this is new update method for me!
What is the differend betwen 2.03.401.2 and 2.03.456.2 ?
Click to expand...
Click to collapse
Yes, same question. I already installed "RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship". what is the different? thank you.
pdaman said:
Yes, same question. I already installed "RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship". what is the different? thank you.
Click to expand...
Click to collapse
Only the numbers are different and xt9, propebly support ME language, nothing else
Megaupload
http://www.megaupload.com/?d=WTS8UQKB
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.40 Olinex SPL i carnt sync with computer and carnt get out of try colour screen so i dont think i can update from phone ive tryed to flash a cooked rom still get same message please help what should i do thanks
Same here, do have HARD-SPL on it, tried several times. But now I cannot seem to soft or hard-reset....so cannot try to install it from the interal storage as well....is it bricked now?
buff said:
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.40 Olinex SPL i carnt sync with computer and carnt get out of try colour screen so i dont think i can update from phone ive tryed to flash a cooked rom still get same message please help what should i do thanks
Click to expand...
Click to collapse
Flash with HardSPL 1.34,and hard reset.
sorry but keep trying but all i get is file error 240 file open have you got any ideas on what or how to do it thanks
hello!
can someone tell me how to extract the .nbh file from the exe file, or even upload it somewhere. i'm not able to flash this rom to my diamond(same error with corrupted file). i have hspl 1,93.
tzacanel said:
hello!
can someone tell me how to extract the .nbh file from the exe file, or even upload it somewhere. i'm not able to flash this rom to my diamond(same error with corrupted file). i have hspl 1,93.
Click to expand...
Click to collapse
Uuse winRAR to open the exe file and extract the contents to a folder which will contain NBH file
Hi guy,
I would like to flash my kaiser with this rom PDA Corner Ultimate v11.
I have a problem in executing the first step ... (Hard SPL)
Normaly run the file (. exe) but in the file "
DaveShaw (. Hard)
3:34 Hard SPL nostuckinSPL Force USB "
There is not ... How do I run?
Thanks
Antony20miles said:
Hi guy,
I would like to flash my kaiser with this rom PDA Corner Ultimate v11.
I have a problem in executing the first step ... (Hard SPL)
Normaly run the file (. exe) but in the file "
DaveShaw (. Hard)
3:34 Hard SPL nostuckinSPL Force USB "
There is not ... How do I run?
Thanks
Click to expand...
Click to collapse
I have just flashed my kaiser with
HardSPL="kaiser-HardSPLv1"
Radio="1.65.29.22"
ROM cooked="TIR 8K"
but in this HardSPL (3:34 Hard SPL nostuckinSPL Force USB )there isn't "file.exe", but only "ruu_signed.nbh".
How can i do to flash without the "file.exe"?
Thanks
Your OS isn't customized
for your hardware.
Please reflash the proper
ROM code or contart the
service crnter
DIAM120 64M
SLP-1.39.0000
MicroP-Diam ATAGE_PVT v0x32
IMEI 357568011556722
SN HT842GN29676
help me
Lets try again...this time different approach.
Okay lets try to save your device again.
Solution 1
-Remove your battery. Yes! Remove your battery.
-Keep it out for 10 minutes
-After 10 minutes have passed. Insert your battery.
-Now switch ON your device and see what happens.
IF YOU STILL get the same message, then repeat Solution 1 again for 15 minutes this time.
IF that did not work come to Solution 2
Solution 2
Step 1.
PUT UR DEVICE IN BOOTLOADER MODE. Press reset button with stylus and keep holding volume down key.
Step 2. Download this, extract and try to install
http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705
Now go to BOOTLOADER MODE again. Your SPL should be 1.40.Olinex
Step 3. Download this, extract and try to install
http://www.4shared.com/file/W25srZQT/DiamonCustomRUU_Radio_1002505.html
Step 4. Download this, extract and try to install
http://rapidshare.com/#!download|706l3|261693573|Diamond_Cloudy_1.3.zip|73779
IF YOUR Device is working again. Let me know. Then we will find a solution to have chinese on your device again.
Step 4. Download this, extract and try to install
http://rapidshare.com/#!download|706..._1.3.zip|73779
can't download it
Step 2. Download this, extract and try to install
http://forum.xda-developers.com/atta...2&d=1213719705
stop 0%
What is your SPL from bootloader mode.
Is it 1.40.Olinex
Btw is your diamond htc branded or dopod branded?
Still 1.39.00
my diamond is htc branded
Lets try HSPL 1.93 then
Download and try to see if you can install via BOOTLOADER mode
http://forum.xda-developers.com/attachment.php?attachmentid=474155&stc=1&d=1293448754
If successful your SPL should be 1.93.Olinex
Lemme know what happens
If HSPL 1.93 has been successfull, you can try this ROM
AZTOR (AlphaZero)
http://xdadev.f1ip.net/index.php?dir=Diamond/Roms/AlphaZero/&file=AZTOR-V6-WWE.rar
or any other rom of your choice.
I NEED S910 Original ROM
So its dopod after all eh..
Here you go. This is for dopod s910
http://shipped-roms.com/download.ph...52.66.25.35_1.15.25.14_Test.exe&send_file=yes
flash and tell us what happens
This guide is Diam100 NBH
Can we boot an android rom with this?
AF_624 said:
Can we boot an android rom with this?
Click to expand...
Click to collapse
Not now.. we doesn't have recovery.img and ROM for NAND! just LK Bootloader is working.
awesome~!
i saw this at tiad8 forum just now!
is it finally happening..? >v<
Awesome !!!!
Hi myitx! I tested this nbh and I got "invalid id model", what I'm doing wrong? thank you for your hard work!
Device: HTC Touch Diamond (DIAM100)
Radio: 1.17.25.09
HardSPL: OliNex 1.40
pajerm said:
Hi myitx! I tested this nbh and I got "invalid id model", what I'm doing wrong? thank you for your hard work!
Device: HTC Touch Diamond (DIAM100)
Radio: 1.17.25.09
HardSPL: OliNex 1.40
Click to expand...
Click to collapse
does it need security unlock...?
maybe..?~
any guide how to use it and how it works?
hfzarx said:
does it need security unlock...?
maybe..?~
Click to expand...
Click to collapse
Now I reflash my HSPL with "Hard spl 1.93" and your nbh works great! tank you!
great!
glad to hear it works..although, not much we can do with this now~
the recovery img dont work for me too...><
hello how do j install this android nand rom on my touch diamond?
sorry for my english
Not yet, But they need more testers. The Recovery.img for the diamond 100 is here too. All the work is done by (I believe)tiad8 forum. For more info and status of this project, please visit this site (google: Diamond nand tiad8)....
Guide from tiad forum:
- You must have Hard spl 1.93
-Download :DIAM100.nbh , recovery.img
-flash nbh "usb flash" with DiamonCustomRUU and then pull battery.
-connect your usb then turn on device.wait for fastboot to be enable. you need the latest from myitx V2 for diam100 and 300
-flash recovery,code,fastboot flash recovery recovery.img
-boot into recovery,code,fastboot boot recovery.img
fpopic said:
- You must have Hard spl 1.93
-Download :DIAM100.nbh , recovery.img
-flash nbh "usb flash" with DiamonCustomRUU and then pull battery.
-connect your usb then turn on device.wait for fastboot to be enable. you need the latest from myitx V2 for diam100 and 300
-flash recovery,code,fastboot flash recovery recovery.img
-boot into recovery,code,fastboot boot recovery.img
Click to expand...
Click to collapse
Any screenshot?
Thx
i am waiting that too cause i dont have much time for testing it and then putting WinMo6.5 back (cause i have only diamond). if i put that nbh i will lose all my settings and programs installed on winmo, will i loose internal storage of neofroyo on haret ?
fpopic said:
i am waiting that too cause i dont have much time for testing it and then putting WinMo6.5 back (cause i have only diamond). if i put that nbh i will lose all my settings and programs installed on winmo, will i loose internal storage of neofroyo on haret ?
Click to expand...
Click to collapse
Yep, With a nand Android rom you will loose all your data and setting (not the internal storage only the nand memory). To install Neofroyo properly, the internal storage needs special formats. So you need to put the data and settings after install of neofroyo back on the internal storage.
But I prefer Nand flash because its faster and more stable. If there is a stable and fully working rom of course .
martin_1990 said:
Yep, With a nand Android rom you will loose all your data and setting. To install Neofroyo properly, the internal storage needs special formats. So you need to put the data and settings after install of neofroyo back on the internal storage.
But I prefer Nand flash because its faster and more stable. If there is a stable and fully working rom of course .
Click to expand...
Click to collapse
no i know how to install neofroyo but if i istall nbh (as on kaiser i had before) and test it and then install back winmo titanium rom will ext2 (for neopeek's neofroyo) partitions will be saved or formated while flashing rom
hope this will be done soon, because FRX07.1 is very mature, but the speed and batery life is very poor, so hopefully this will be better with NAND Flash.
If someone has more info about current status and maybe an eta I would be glad.
I didn't think that this will ever be possible
fpopic said:
no i know how to install neofroyo but if i istall nbh (as on kaiser i had before) and test it and then install back winmo titanium rom will ext2 (for neopeek's neofroyo) partitions will be saved or formated while flashing rom
Click to expand...
Click to collapse
All data and partitions on the internal storage will be saved. Only the Nand memory will be formatted.
and android from haret don't use anything from NAND ?